arXiv subjects

Ivan Coluzza

Publications and source records attributed to Ivan Coluzza.

17 recordsLinked to original sources

arXiv2025

Acceleration of Parallel Tempering for Markov Chain Monte Carlo methods

Markov Chain Monte Carlo methods are algorithms used to sample probability distributions, commonly used to sample the Boltzmann distribution of physical/chemical models (e.g., protein folding, Ising model, etc.). This allows us to study their properties by sampling the most probable states of those systems. However, the sampling capabilities of these methods are not sufficiently accurate when handling complex configuration spaces. This has resulted in the development of new techniques that improve sampling accuracy, usually at the expense of increasing the computational cost. One of such techniques is Parallel Tempering which improves accuracy by running several replicas which periodically exchange their states. Computationally, this imposes a significant slow-down, which can be counteracted by means of parallelization. These schemes enable MCMC/PT techniques to be run more effectively and allow larger models to be studied. In this work, we present a parallel implementation of Metropolis-Hastings with Parallel Tempering, using OpenMP and CUDA for the parallelization in modern CPUs and GPUs, respectively. The results show a maximum speed-up of 52x using OpenMP with 48 cores, and of 986x speed-up with the CUDA version. Furthermore, the results serve as a basic benchmark to compare a future quantum implementation of the same algorithm.

cs.DC↗

arXiv2025

On the Convergence of Markov Chain Distribution within Quantum Walk Circuit Subspace

Markov Chain Monte Carlo (MCMC) methods are algorithms for sampling probability distributions, commonly applied to the Boltzmann distribution in physical and chemical models such as protein folding and the Ising model. These methods enable exploration of such systems by sampling their most probable states. However, sampling multidimensional and multimodal distributions with MCMC requires substantial computational resources, leading to the development of techniques aimed at improving sampling efficiency. In this context, quantum computing, with its potential to accelerate classical methods, emerges as a promising solution to the sampling problem. In this work, we present the design of a new circuit based on the Discrete Quantum Walk (DQW) algorithm to perform MCMC sampling over a desired distributions. Simulation results show convergence behavior in the superposition of the quantum register that encodes the target distribution. This design is further refined to increase convergence speed and, consequently, the scalability of the algorithm.

quant-ph↗

arXiv2021

Water Contribution to the Protein Folding and its Relevance in Protein Design and Protein Aggregation

Water plays a fundamental role in protein stability. However, the effect of the properties of water on the behaviour of proteins is only partially understood. Several theories have been proposed to give insight into the mechanisms of cold and pressure denaturation, or the limits of temperature and pressure above which no protein has a stable, functional state, or how unfolding and aggregation are related. Here we review our results based on a theoretical approach that can rationalise the water contribution to protein solutions' free energy. We show, using Monte Carlo simulations, how we can rationalise experimental data with our recent results. We discuss how our findings can help develop new strategies for the design of novel synthetic biopolymers or possible approaches for mitigating neurodegenerative pathologies.

cond-mat.soft↗

arXiv2019

In silico evidence that protein unfolding is as a precursor of the protein aggregation

We present a computational study on the folding and aggregation of proteins in aqueous environment, as function of its concentration. We show how the increase of the concentration of individual protein species can induce a partial unfolding of the native conformation without the occurrence of aggregates. A further increment of the protein concentration results in the complete loss of the folded structures and induces the formation of protein aggregates. We discuss the effect of the protein interface on the water fluctuations in the protein hydration shell and their relevance in the protein-protein interaction.

cond-mat.soft↗

arXiv2017

Limiting the valence: advancements and new perspectives on patchy colloids, soft functionalized nanoparticles and biomolecules

Limited bonding valence, usually accompanied by well-defined directional interactions and selective bonding mechanisms, is nowadays considered among the key ingredients to create complex structures with tailored properties: even though isotropically interacting units already guarantee access to a vast range of functional materials, anisotropic interactions can provide extra instructions to steer the assembly of specific architectures. The anisotropy of effective interactions gives rise to a wealth of self-assembled structures both in the realm of suitably synthesized nano- and micro-sized building blocks and in nature, where the isotropy of interactions is often a zero-th order description of the complicated reality. In this review, we span a vast range of systems characterized by limited bonding valence, from patchy colloids of new generation to polymer-based functionalized nanoparticles, DNA-based systems and proteins, and describe how the interaction patterns of the single building blocks can be designed to tailor the properties of the target final structures.

cond-mat.soft↗

arXiv2017

How the stability of a folded protein depends on interfacial water properties and residue-residue interactions

Proteins work only if folded in their native state, but changes in temperature T and pressure P induce their unfolding. Therefore for each protein there is a stability region (SR) in the T-P thermodynamic plane outside which the biomolecule is denaturated. It is known that the extension and shape of the SR depend on i) the specific protein residue-residue interactions in the native state of the amino acids sequence and ii) the water properties at the hydration interface. Here we analyze by Monte Carlo simulations of different coarse-grained protein models in explicit water how changes in i) and ii) affect the SR. We show that the solvent properties ii) are essential to rationalize the SR shape at low T and high P and that our finding are robust with respect to parameter changes and with respect to different protein models. These results can help in developing new strategies for the design of novel synthetic biopolymers.

cond-mat.soft↗

arXiv2016

Universal criterion for designability of heteropolymers

Proteins are an example of heteropolymers able to self-assemble in specific target structures. The self-assembly of designed artificial heteropolymers is still, to the best of our knowledge, not possible with control over the single chain self-assembling properties comparable to what natural proteins can achieve. What artificial heteropolymers lacks compared to bio-heteropolymers that grants the latter such a versatility? Is the geometry of the protein skeleton the only a particular choice to be designable? Here we introduce a general criteria to discriminate which polymer backbones can be designed to adopt a predetermined structure. With our approach we can explore different polymer backbones and different amino acids alphabets. By comparing the radial distribution functions of designable and not-designable scenarios we identify as designability criteria the presence of a particular peak in the radial distribution function that dominates over the random packing of the heteropolymer. We show that the peak is a universal feature of all designable heteropolymers, as it is dominating also the radial distribution function of natural proteins. Our finding can help in understanding the key features that make proteins a highly designable system. The criteria that we present can be applied to engineer new types of self-assembling modular polymers that will open new applications for polymer based material science.

cond-mat.soft↗

arXiv2015

JETSPIN: a specific-purpose open-source software for simulations of nanofiber electrospinning

We present the open-source computer program JETSPIN, specifically designed to simulate the electrospinning process of nanofibers. Its capabilities are shown with proper reference to the underlying model, as well as a description of the relevant input variables and associated test-case simulations. The various interactions included in the electrospinning model implemented in JETSPIN are discussed in detail. The code is designed to exploit different computational architectures, from single to parallel processor workstations. This paper provides an overview of JETSPIN, focusing primarily on its structure, parallel implementations, functionality, performance, and availability.

physics.comp-ph↗

arXiv2015

The JETSPIN User Manual (Version 1.20)

JETSPIN is an open-source computer program specifically designed to simulate the electrospinning process of nanofibers. This manual provides an overview of JETSPIN, focusing primarily on its structure, parallel implementations, functionality, performance, and availability. The code is designed to exploit different computational architectures, from single to parallel processor workstations.

cond-mat.soft↗

arXiv2015

Different regimes of the uniaxial elongation of electrically charged viscoelastic jets due to dissipative air drag

We investigate the effects of dissipative air drag on the dynamics of electrified jets in the initial stage of the electrospinning process. The main idea is to use a Brownian noise to model air drag effects on the uniaxial elongation of the jets. The developed numerical model is used to probe the dynamics of electrified polymer jets at different conditions of air drag force, showing that the dynamics of the charged jet is strongly biased by the presence of air drag forces. This study provides prospective beneficial implications for improving forthcoming electrospinning experiments.

cond-mat.soft↗

arXiv2014

Ultrathin fibres from electrospinning experiments under driven fast-oscillating perturbations

The effects of a driven fast-oscillating spinneret on the bending instability of electrified jets, leading to the formation of spiral structures in electrospinning experiments with charged polymers, are explored by means of extensive computer simulations. It is found that the morphology of the spirals can be placed in direct correspondence with the oscillation frequency and amplitude. In particular, by increasing the oscillation amplitude and frequency, thinner fibres can be extracted by the same polymer material, thereby opening design scenarios in electrospinning experiments.

physics.flu-dyn↗

arXiv2014

Transferable coarse-grained potential for $\textit{de novo}$ protein folding and design

Protein folding and design are major biophysical problems, the solution of which would lead to important applications especially in medicine. Here a novel protein model capable of simultaneously provide quantitative protein design and folding is introduced. With computer simulations it is shown that, for a large set of real protein structures, the model produces designed sequences with similar physical properties to the corresponding natural occurring sequences. The designed sequences are not yet fully realistic and require further experimental testing. For an independent set of proteins, notoriously difficult to fold, the correct folding of both the designed and the natural sequences is also demonstrated. The folding properties are characterized by free energy calculations. which not only are consistent among natural and designed proteins, but we also show a remarkable precision when the folded structures are compared to the experimentally determined ones. Ultimately, this novel coarse-grained protein model is unique in the combination of its fundamental three features: its simplicity, its ability to produce natural foldable designed sequences, and its structure prediction precision. The latter demonstrated by free energy calculations. It is also remarkable that low frustration sequences can be obtained with such a simple and universal design procedure, and that the folding of natural proteins shows funnelled free energy landscapes without the need of any potentials based on the native structure.

physics.bio-ph↗

arXiv2014

Effects of non-linear rheology on the electrospinning process: a model study

We develop an analytical bead-spring model to investigate the role of non-linear rheology on the dynamics of electrified jets in the early stage of the electrospinning process. Qualitative arguments, parameter studies as well as numerical simulations, show that the elongation of the charged jet filament is significantly reduced in the presence of a non-zero yield stress. This may have beneficial implications for the optimal design of future electrospinning experiments.

physics.flu-dyn↗

arXiv2012

Telechelic star polymers as self-assembling units from the molecular to the macroscopic scaleBarbara Capone

By means of multiscale molecular simulations, we show that telechelic-star polymers are a simple, robust and tunable system, which hierarchically self-assembles first into soft-patchy particles and then into targeted crystalline structures. The self-aggregating patchy behavior can be fully controlled by the number of arms per star and by the fraction of attractive monomeric units at the free ends of the arms. Such self-assembled soft-patchy particles while forming, upon augmenting density, gel-like percolating networks and stable ordered structures, preserve properties as particle size, number and arrangement of patches per particle. In particular, we demonstrate that the flexibility inherent in the soft-patchy particles brings forward a novel mechanism that leads to the stabilisation of diamond and simple cubic crystals over a wide range of densities, and for molecular sizes ranging from about 10 nm up to the micrometer scale.

cond-mat.soft↗

arXiv2012

The configurational space of colloidal patchy polymers with heterogeneous sequences

In this work we characterize the configurational space of a short chain of colloidal particles as function of the range of directional and heterogeneous isotropic interactions. The individual particles forming the chain are colloids decorated with patches that act as interaction sites between them. We show, using computer simulations, that it is possible to sample the relative probability of occurrence of a structure with a sequence in the space of all possible realizations of the chain. The results presented here represent a first attempt to map the space of possible configurations that a chain of colloidal particles may adopt. Knowledge of such a space is crucial for a possible application of colloidal chains as models for designable self-assembling systems.

cond-mat.soft↗

arXiv2012

Controlling the folding and substrate-binding of proteins using polymer brushes

The extent of coupling between the folding of a protein and its binding to a substrate varies from protein to protein. Some proteins have highly structured native states in solution, while others are natively disordered and only fold fully upon binding. In this Letter, we use Monte Carlo simulations to investigate how disordered polymer chains grafted around a binding site affect the folding and binding of three model proteins. The protein that approaches the substrate fully folded is more hindered during the binding process than those whose folding and binding are cooperative. The polymer chains act as localized crowding agents and can select correctly folded and bound configurations in favor of non-specifically adsorbed states. The free energy change for forming all intra-protein and protein-substrate contacts can depend non-monotonically on the polymer length.

cond-mat.soft↗

arXiv2007

The transition from highly to fully stretched polymer brushes in good solvent

The stretching of brushes of long polymers grafted to a planar surface is investigated byMonte Carlo simulations in the limit of very high grafting densities, as achieved in recent experiments. The monomer density profiles are shown to deviate considerably from the parabolic limiting form predicted by self-consistent field theory. A rapid transition is observed from parabolic to fully stretched polymers, characterized by a dramatic change in the end-monomer height distribution and by a clear cross-over in the slope of the brush height versus scaled grafting density.

cond-mat.soft↗