arXiv subjects

Ivan C. Christov

Publications and source records attributed to Ivan C. Christov.

At least 55 records · Page 3Linked to original sources

arXiv2021

Profiling a soft solid layer to passively control the conduit shape in a compliant microchannel during flow

The shape of a microchannel during flow through it is instrumental to understanding the physics that govern various phenomena ranging from rheological measurements of fluids to separation of particles and cells. Two commonly used approaches for obtaining a desired channel shape (for a given application) are (i) fabricating the microchannel in the requisite shape and (ii) actuating the microchannel walls during flow to obtain the requisite shape. However, these approaches are not always viable. We propose an alternative, passive approach to {\it a priori} tune the elastohydrodynamics in a microsystem, towards achieving a pre-determined (but not pre-fabricated) flow geometry when the microchannel is subjected to flow. That is to say, we use the interaction between a soft solid layer, the viscous flow beneath it and the shaped rigid wall above it, to tune the fluid domain's shape. Specifically, we study a parallel-wall microchannel whose top wall is a slender soft coating of arbitrary thickness attached to a rigid platform. We derive a nonlinear differential equation for the soft coating's fluid--solid interface, which we use to infer how to achieve specific conduit shapes during flow. Using this theory, we demonstrate the tuning of four categories of microchannel geometries, which establishes, via a proof-of-concept, the viability of our modeling framework. We also explore slip length patterning on the rigid bottom wall of the microchannel, a common technique in microfluidics, as an addition `handle' for microchannel shape control. However, we show that this effect is much weaker in practice.

cond-mat.soft↗

arXiv2021

Comment on: "Stokes' first problem for heated flat plate with Atangana--Baleanu fractional derivative" [Chaos Solitons Fractals 117 (2018) 68]

In the sense of distributions, the derivative of the Heaviside unit step function $H(t)$ is a generalized Dirac-$δ$ distribution. If the velocity $V(t)$ of a flat plate is impulsive, as $V(t)=H(t)$ (i.e., it is suddenly set into motion with unit velocity at $t=0^+$), then its acceleration is $V'(t)=δ(t)$. The Dirac-$δ$ distribution has no point values. However, when the Dirac-$δ$ is the forcing term of an ODE (in $t$), it contributes to the solution. The recently published paper [Chaos Solitons Fractals 117 (2018) 68] incorrectly treats the Dirac-$δ$ function as being identically 0. This Comment analyzes the source of this error, and provides guidance on how to correct it (based on the established literature). The mathematical error identified is in addition to some issues about rheological models with fractional derivatives, which are also noted. That is to say, whether or not an "Atangana--Baleanu fractional derivative" is used in [Chaos Solitons Fractals 117 (2018) 68], the solution to Stokes' first problem provided therein is not correct.

physics.flu-dyn↗

arXiv2021

Kink-Antikink Collisions and Multi-Bounce Resonance Windows in Higher-Order Field Theories

We study collisions of coherent structures in higher-order field-theoretic models, such as the $ϕ^8$, $ϕ^{10}$ and $ϕ^{12}$ ones. The main distinguishing feature, of the example models considered herein, is that the collision arises due to the long-range interacting algebraic tails of these solitary waves. We extend the approach to suitably initialize the relevant kinks, in the additional presence of finite initial speed, in order to minimize the dispersive wave radiation potentially created by their slow spatial decay. We find that, when suitably initialized, these models still feature the multi-bounce resonance windows earlier found in models in which the kinks bear exponential tails, such as the $ϕ^4$ and $ϕ^6$ field theories among others. Also present is the self-similar structure of the associated windows with three- and more-bounce windows at the edges of two- and lower-bounce ones. Moreover, phenomenological, but highly accurate (and predictive) scaling relations are derived for the dependence of the time between consecutive collisions and, e.g., the difference in kinetic energy between the incoming one and the critical one for one-bounces. Such scalings are traced extensively over two-bounce collision windows throughout the three models, hinting at the possibility of an analytical theory in this direction.

hep-th↗

arXiv2020

Tuning a magnetic field to generate spinning ferrofluid droplets with controllable speed via nonlinear periodic interfacial waves

Two dimensional free surface flows in Hele-Shaw configurations are a fertile ground for exploring nonlinear physics. Since Saffman and Taylor's work on linear instability of fluid--fluid interfaces, significant effort has been expended to determining the physics and forcing that set the linear growth rate. However, linear stability does not always imply nonlinear stability. We demonstrate how the combination of a radial and an azimuthal external magnetic field can manipulate the interfacial shape of a linearly unstable ferrofluid droplet in a Hele-Shaw configuration. We show that weakly nonlinear theory can be used to tune the initial unstable growth. Then, nonlinearity arrests the instability, and leads to a permanent deformed droplet shape. Specifically, we show that the deformed droplet can be set into motion with a predictable rotation speed, demonstrating nonlinear traveling waves on the fluid-fluid interface. The most linearly unstable wavenumber and the combined strength of the applied external magnetic fields determine the traveling wave shape, which can be asymmetric.

nlin.PS↗

arXiv2020

Time-averaged transport in oscillatory squeeze flow of a viscoelastic fluid

Periodically-driven flows are known to generate non-zero, time-averaged fluxes of heat or solute species, due to the interactions of out-of-phase velocity and temperature/concentration fields, respectively. Herein, we investigate such transport (a form of the well-known Taylor--Aris dispersion) in the gap between two parallel plates, one of which oscillates vertically, generating a time-periodic squeeze flow of either a newtonian or Maxwellian fluid. Using the method of multiple time-scale homogenization, the mass/heat balance equation describing transport in this flow is reduced to a one-dimensional advection--diffusion--reaction equation. This result indicates three effective mechanisms in the mass/heat transfer in the system: an effective diffusion that spreads mass/heat along the concentration/temperature gradient, an effective advective flux, and an effective reaction that releases or absorbs mass/heat - in the time-averaged frame. Our results demonstrate that there exist resonant modes under which the velocity peaks when the dimensionless plate oscillation frequency (embodied by the Womersley number, the ratio of the transient inertia to viscous forces) approaches specific values. As a result, transport in this flow is significantly influenced by the dimensionless frequency. On the one hand, the effective, time-averaged dispersion coefficient is always larger than the molecular diffusivity, and is sharply enhanced near resonance. The interaction between fluid elasticity and the oscillatory forcing enhances the efficiency of transport in the system. On the other hand, the identified effective advection and reaction mechanisms may transport mass/heat from regions of high concentration/temperature to those of low concentration/temperature, or vice versa, depending on the value of dimensionless frequency.

physics.flu-dyn↗

arXiv2020

Soft Hydraulics in Channels with Thick Walls: The Finite-Reynolds-Number Base State and Its Stability

We analyze the linear stability of the base state of the problem of coupled flow and deformation in a long and shallow rectangular soft hydraulic conduit with a thick top wall. Specifically, the steady base state is computed at low but finite Reynolds number. Then, we show that with the upstream flux fixed and the outlet pressure set to gauge, the flow is linearly stable to infinitesimal flow-wise perturbations. Multiple oscillatory but stable eigenmodes are computed in a range of the reduced Reynolds number, $\hat{Re}$, and the so-called fluid--structure interaction (FSI) parameter, $λ$, indicating the stiffness of this FSI system. These results provide a framework to address, in future work, the individual effects of various aspects of two-way FSI coupling on instability and flow transition in soft hydraulic conduits.

physics.flu-dyn↗

arXiv2020

Revisiting steady viscous flow of a generalized Newtonian fluid through a slender elastic tube using shell theory

A flow vessel with an elastic wall can deform significantly due to viscous fluid flow within it, even at vanishing Reynolds number (no fluid inertia). Deformation leads to an enhancement of throughput due to the change in cross-sectional area. The latter gives rise to a non-constant pressure gradient in the flow-wise direction and, hence, to a nonlinear flow rate--pressure drop relation (unlike the Hagen--Poiseuille law for a rigid tube). Many biofluids are non-Newtonian, and are well approximated by generalized Newtonian (say, power-law) rheological models. Consequently, we analyze the problem of steady low Reynolds number flow of a generalized Newtonian fluid through a slender elastic tube by coupling fluid lubrication theory to a structural problem posed in terms of Donnell shell theory. A perturbative approach (in the slenderness parameter) yields analytical solutions for both the flow and the deformation. Using matched asymptotics, we obtain a uniformly valid solution for the tube's radial displacement, which features both a boundary layer and a corner layer caused by localized bending near the clamped ends. In doing so, we obtain a ``generalized Hagen--Poiseuille law'' for soft microtubes. We benchmark the mathematical predictions against three-dimensional two-way coupled direct numerical simulations (DNS) of flow and deformation performed using the commercial computational engineering platform by ANSYS. The simulations show good agreement and establish the range of validity of the theory. Finally, we discuss the implications of the theory on the problem of the flow-induced deformation of a blood vessel, which is featured in some textbooks.

physics.flu-dyn↗

arXiv2020

Static response of deformable microchannels: A comparative modelling study

We present a comparative modelling study of fluid-structure interactions in microchannels. Through a mathematical analysis based on plate theory and the lubrication approximation for low-Reynolds-number flow, we derive models for the flow rate-pressure drop relation for long shallow microchannels with both thin and thick deformable top walls. These relations are tested against full three-dimensional two-way-coupled fluid-structure interaction simulations. Three types of microchannels, representing different elasticity regimes and having been experimentally characterized previously, are chosen as benchmarks for our theory and simulations. Good agreement is found in most cases for the predicted, simulated and measured flow rate-pressure drop relationships. The numerical simulations performed allow us to also carefully examine the deformation profile of the top wall of the microchannel in any cross section, showing good agreement with the theory. Specifically, the prediction that span-wise displacement in a long shallow microchannel decouples from the flow-wise deformation is confirmed, and the predicted scaling of the maximum displacement with the hydrodynamic pressure and the various material and geometric parameters is validated.

physics.flu-dyn↗

arXiv2020

Unsteady fluid--structure interactions in a soft-walled microchannel: A one-dimensional lubrication model for finite Reynolds number

We develop a one-dimensional model for the unsteady fluid--structure interaction (FSI) between a soft-walled microchannel and viscous fluid flow within it. A beam equation, which accounts for both transverse bending rigidity and nonlinear axial tension, is coupled to a one-dimensional fluid model obtained from depth-averaging the two-dimensional incompressible Navier--Stokes equations across the channel height. Specifically, the Navier--Stokes equations are scaled in the viscous lubrication limit relevant to microfluidics. The resulting set of coupled nonlinear partial differential equations is solved numerically through a segregated approach employing fully-implicit time stepping. We explore both the static and dynamic FSI behavior of this example microchannel system by varying a reduced Reynolds number $Re$, which necessarily changes the Strouhal number $St$, while we keep the geometry and a modified dimensionless Young's modulus $Σ$ fixed. At steady state, an order-of-magnitude analysis (balancing argument) shows that the axially-averaged pressure in the flow, $\langle P\rangle$, exhibits two different scaling regimes, while the maximum deformation of the top wall of the channel, $H_{\mathrm{max}}$, can fall into four different regimes, depending on the magnitudes of $Re$ and $Σ$. These regimes are physically explained as resulting from the competition between the inertial and viscous forces in the fluid flow as well as the bending resistance and tension in the elastic wall. Finally, the linear stability of the steady inflated microchannel shape is assessed via a modal analysis, showing the existence of many highly oscillatory but stable modes, which further highlights the computational challenge of simulating unsteady FSIs.

physics.flu-dyn↗

arXiv2020

Long-time asymptotics of non-degenerate non-linear diffusion equations

We study the long-time asymptotics of prototypical non-linear diffusion equations. Specifically, we consider the case of a non-degenerate diffusivity function that is a (non-negative) polynomial of the dependent variable of the problem. We motivate these types of equations using Einstein's random walk paradigm, leading to a partial differential equation in non-divergence form. On the other hand, using conservation principles leads to a partial differential equation in divergence form. A transformation is derived to handle both cases. Then, a maximum principle (on both an unbounded and a bounded domain) is proved, in order to obtain bounds above and below for the time-evolution of the solutions to the non-linear diffusion problem. Specifically, these bounds are based on the fundamental solution of the linear problem (the so-called Aronson's Green function). Having thus sandwiched the long-time asymptotics of solutions to the non-linear problems between two fundamental solutions of the linear problem, we prove that, unlike the case of degenerate diffusion, a non-degenerate diffusion equation's solution converges onto the linear diffusion solution at long times. Select numerical examples support the mathematical theorems and illustrate the convergence process. Our results have implications on how to interpret asymptotic scalings of potentially anomalous diffusion processes (such as in the flow of particulate materials) that have been discussed in the applied physics literature.

math.AP↗

arXiv2020

Hydrodynamic Bulge Testing: Materials Characterization without Measuring Deformation

Characterizing the elastic properties of soft materials through bulge testing relies on accurate measurement of deformation, which is experimentally challenging. To avoid measuring deformation, we propose a hydrodynamic bulge test for characterizing the material properties of thick, pre-stressed elastic sheets via their fluid--structure interaction with a steady viscous fluid flow. Specifically, the hydrodynamic bulge test relies on a pressure drop measurement across a rectangular microchannel with a deformable top wall. We develop a mathematical model using first-order shear-deformation theory of plates with stretching, and the lubrication approximation for Newtonian fluid flow. Specifically, a relationship is derived between the imposed flow rate and the total pressure drop. Then, this relationship is inverted numerically to yield estimates of the Young's modulus (given the Poisson ratio), if the pressure drop is measured (given the steady flow rate). Direct numerical simulations of two-way-coupled fluid--structure interaction are carried out in ANSYS to determine the cross-sectional membrane deformation and the hydrodynamic pressure distribution. Taking the simulations as ``ground truth,'' a hydrodynamic bulge test is performed using the simulation data to ascertain the accuracy and validity of the proposed methodology for estimating material properties. An error propagation analysis is performed via Monte Carlo simulation to characterize the susceptibility of the hydrodynamic bulge test estimates to noise. We find that, while a hydrodynamic bulge test is less accurate in characterizing material properties, it is less susceptible to noise, in the input (measured) variable, than a hydrostatic bulge test.

cond-mat.soft↗

arXiv2019

Computational Analysis of Interfacial Dynamics in Angled Hele-Shaw Cells: Instability Regimes

We present a theoretical and numerical study on the (in)stability of the interface between two immiscible liquids, i.e., viscous fingering, in angled Hele-Shaw cells across a range of capillary numbers ($Ca$). We consider two types of angled Hele-Shaw cells: diverging cells with a positive depth gradient and converging cells with a negative depth gradient, and compare those against parallel cells without a depth gradient. A modified linear stability analysis is employed to derive an expression for the growth rate of perturbations on the interface and for the critical capillary number ($Ca_c$) for such tapered Hele-Shaw cells with small gap gradients. Based on this new expression for $Ca_c$, a three-regime theory is formulated to describe the interface (in)stability: (i) in Regime I, the growth rate is always negative, thus the interface is stable; (ii) in Regime II, the growth rate remains zero (parallel cells), changes from negative to positive (converging cells), or from positive to negative (diverging cells), thus the interface (in)stability possibly changes type at some location in the cell; (iii) in Regime III, the growth rate is always positive, thus the interface is unstable. We conduct three-dimensional direct numerical simulations of the full Navier--Stokes equations, using a phase field method to enforce surface tension at the interface, to verify the theory and explore the effect of depth gradient on the interface (in)stability. We demonstrate that the depth gradient has only a slight influence in Regime I, and its effect is most pronounced in Regime III. Finally, we provide a critical discussion of the stability diagram derived from theoretical considerations versus the one obtained from direct numerical simulations.

physics.flu-dyn↗

arXiv2019

Theory of the flow-induced deformation of shallow compliant microchannels with thick walls

Long, shallow microchannels embedded in thick soft materials are widely used in microfluidic devices for lab-on-a-chip applications. However, the bulging effect caused by fluid--structure interactions between the internal viscous flow and the soft walls has not been completely understood. Previous models either contain a fitting parameter or are specialized to channels with plate-like walls. This work is a theoretical study of the steady-state response of a compliant microchannel with a thick wall. Using lubrication theory for low-Reynolds-number flows and the theory for linearly elastic isotropic solids, we obtain perturbative solutions for the flow and deformation. Specifically, only the channel's top wall deformation is considered, and the ratio between its thickness $t$ and width $w$ is assumed to be $(t/w)^2 \gg 1$. We show that the deformation at each stream-wise cross-section can be considered independently, and that the top wall can be regarded as a simply supported rectangle subject to uniform pressure at its bottom. The stress and displacement fields are found using Fourier series, based on which the channel shape and the hydrodynamic resistance are calculated, yielding a new flow rate--pressure drop relation without fitting parameters. Our results agree favorably with, and thus rationalize, previous experiments.

physics.flu-dyn↗

arXiv2019

Comments on "Scattering Cancellation-Based Cloaking for the Maxwell--Cattaneo Heat Waves"

A number of errors, both mathematical and conceptual, are identified, in a recent article by Farhat \textit{et al.}\ [Phys.\ Rev.\ Appl.\ \textbf{11}, 044089 (2019)] on cloaking of thermal waves in solids, and corrected. The differences between the two thermal flux laws considered in the latter article are also critically discussed, specifically showing that the chosen model does not, in fact, correspond to the Maxwell--Cattaneo hyperbolic (wave) theory of heat transfer.

physics.class-ph↗

arXiv2019

A two-fluid model for numerical simulation of shear-dominated suspension flows

Suspension flows are ubiquitous in nature (hemodynamics, subsurface fluid mechanics, etc.) and industrial applications (hydraulic fracturing, CO$_2$ storage, etc.). However, such flows are notoriously difficult to model due to the variety of fluid-particle and particle-particle interactions that can occur. In this work, we focus on non-Brownian shear-dominated suspensions, where kinetic collisions are negligible and frictional effects play a dominant role. Under these circumstances, irreversible phenomena such as particle diffusion and migration arise, requiring anisotropic stress models to describe the suspension rheology. On a continuum level, reduced-order models such as the suspension balance model (SBM) or the diffusive flux model are commonly used to predict particle migration phenomena. We propose a new method based on a two-fluid model (TFM), where both the phases are considered as interpenetrating continua with their own conservation of mass and momentum equations. Without employing the nowadays customary simplifications in applying the SBM, we close the ``full'' TFM instead. Specifically, we show that when an anisotropic stress analogous to that used in the SBM is added to the equilibrium equations for the particle phase, the TFM is able to accurately predict particle migration. Thus, the TFM does not require the assumptions of a steady suspension velocity and a Stokesian (inertialess) fluid, and the TFM can be easily extended to include buoyancy and even kinetic collisional models. We present several benchmark simulations of our TFM implementation in OpenFOAM{\textsuperscript\textregistered}, including in curvilinear coordinates and three-dimensional flow. Good agreement between the TFM solutions and previous experimental and numerical results is found.

physics.flu-dyn↗

arXiv2019

Solving Nonlinear Parabolic Equations by a Strongly Implicit Finite-Difference Scheme

We discuss the numerical solution of nonlinear parabolic partial differential equations, exhibiting finite speed of propagation, via a strongly implicit finite-difference scheme with formal truncation error $\mathcal{O}\left[(Δx)^2 + (Δt)^2 \right]$. Our application of interest is the spreading of viscous gravity currents in the study of which these type of differential equations arise. Viscous gravity currents are low Reynolds number (viscous forces dominate inertial forces) flow phenomena in which a dense, viscous fluid displaces a lighter (usually immiscible) fluid. The fluids may be confined by the sidewalls of a channel or propagate in an unconfined two-dimensional (or axisymmetric three-dimensional) geometry. Under the lubrication approximation, the mathematical description of the spreading of these fluids reduces to solving the so-called thin-film equation for the current's shape $h(x,t)$. To solve such nonlinear parabolic equations we propose a finite-difference scheme based on the Crank--Nicolson idea. We implement the scheme for problems involving a single spatial coordinate (i.e., two-dimensional, axisymmetric or spherically-symmetric three-dimensional currents) on an equispaced but staggered grid. We benchmark the scheme against analytical solutions and highlight its strong numerical stability by specifically considering the spreading of non-Newtonian power-law fluids in a variable-width confined channel-like geometry (a "Hele-Shaw cell") subject to a given mass conservation/balance constraint. We show that this constraint can be implemented by re-expressing it as nonlinear flux boundary conditions on the domain's endpoints. Then, we show numerically that the scheme achieves its full second-order accuracy in space and time. We also highlight through numerical simulations how the proposed scheme accurately respects the mass conservation/balance constraint.

physics.flu-dyn↗

arXiv2019

Kink-kink and kink-antikink interactions with long-range tails

In this Letter, we address the {long-range interaction} between kinks and antikinks, as well as kinks and kinks, in $φ^{2n+4}$ field theories for $n>1$. The kink-antikink interaction is generically attractive, while the kink-kink interaction is generically repulsive. We find that the force of interaction decays with the $(\frac{2n}{n-1})$th power of their separation, and we identify the general prefactor for {\it arbitrary} $n$. Importantly, we test the resulting mathematical prediction with detailed numerical simulations of the dynamic field equation, and obtain good agreement between theory and numerics for the cases of $n=2$ ($φ^8$ model), $n=3$ ($φ^{10}$ model) and $n=4$ ($φ^{12}$ model).

hep-th↗

arXiv2019

On the Deformation of a Hyperelastic Tube Due to Steady Viscous Flow Within

In this chapter, we analyze the steady-state microscale fluid--structure interaction (FSI) between a generalized Newtonian fluid and a hyperelastic tube. Physiological flows, especially in hemodynamics, serve as primary examples of such FSI phenomena. The small scale of the physical system renders the flow field, under the power-law rheological model, amenable to a closed-form solution using the lubrication approximation. On the other hand, negligible shear stresses on the walls of a long vessel allow the structure to be treated as a pressure vessel. The constitutive equation for the microtube is prescribed via the strain energy functional for an incompressible, isotropic Mooney--Rivlin material. We employ both the thin- and thick-walled formulations of the pressure vessel theory, and derive the static relation between the pressure load and the deformation of the structure. We harness the latter to determine the flow rate--pressure drop relationship for non-Newtonian flow in thin- and thick-walled soft hyperelastic microtubes. Through illustrative examples, we discuss how a hyperelastic tube supports the same pressure load as a linearly elastic tube with smaller deformation, thus requiring a higher pressure drop across itself to maintain a fixed flow rate.

physics.flu-dyn↗