Hidden Markov Model-Based Remaining Useful Life Estimation of Rolling Bearings Using Vibration Signals: A feasibility study
This feasibility study presents a Hidden Markov Model (HMM)-based methodology for the Remaining Useful Life (RUL) estimation of rolling element bearings when the training vibration signals differ significantly from those of the target bearing. An AutoRegressive (AR) model is first employed to capture the machinery dynamics using vibration acceleration measurements from an initial operating period where all components including the considered bearing are still under healthy condition. The AR model is subsequently used to filter a newly acquired vibration signal from the faulty machinery, and typical Envelope Analysis is performed on the residual signal to identify fault-related repetition frequencies. The amplitudes of these frequencies, combined with statistical features of the AR residuals are fused through Principal Component Analysis to construct a sensitive to bearing degradation Condition Indicator (CI). Based on training data from the healthy state, a threshold is established, and a fault is declared when the CI exceeds this threshold. Once a fault is detected, its progression is modelled as a sequence of consecutive, distinct states, which are identified using K-Means clustering. A left-right HMM with continuous observation densities is estimated to represent the fault progression and thus predict the RUL. The HMM-based RUL estimation methodology is trained using vibration measurements from a limited number of two run-to-failure experiments with two nominally identical bearings, while RUL estimation performance is assessed on a third bearing of the same type. Despite the significant differences between the vibration data used for training and the life cycles of the training bearings with respect to the target bearing, the RUL estimation results indicate an adequate but conservative performance of the postulated HMM-based methodology.