arXiv subjects
Publications and source records attributed to Ingrid D. Barcelos.
This work presents the near-field super-scattering and the near-field thermal emission from 2D hyperbolic crystals as general optical phenomena that link near-field nanophotonics to far-field photonics.
Single-photon emitters in two-dimensional semiconductors offer a versatile platform for integrated quantum photonics, yet their performance is strongly influenced by local dielectric environments and substrate-induced disorder. Here, we examine SPEs in monolayer WSe$_2$ incorporated into hBN/WSe$_2$/Clinochlore van der Waals heterostructures and assess how interface-mediated dielectric modulation governs their optical and quantum characteristics. Low-temperature micro-photoluminescence reveals narrow emission lines (100 - 300 $μ$eV) and robust non-classical behavior, with $g^{(2)}(0) = 0.13 \pm 0.02$ on SiO$_2$ and $0.54 \pm 0.02$ for emitters directly coupled to Clinochlore. Magneto-optical measurements yield effective g-factors near -8, consistent with defect states hybridized with dark excitons. WSe$_2$ on Clinochlore exhibits up to a fivefold enhancement in emission intensity, attributed to coupling with Fe-related substrate states that introduce resonant absorption near 1.75 eV. Kelvin probe force microscopy confirms strong dielectric contrast across thin and thick Clinochlore regions. Time-resolved photoluminescence shows that emitters on SiO$_2$ display a single $\approx 4$ ns lifetime, whereas those on Clinochlore exhibit biexponential dynamics with sub-nanosecond and tens-of-nanoseconds decay components. A phenomenological model incorporating coupling to bright and dark Fe-related states in Clinochlore accounts for modified excitation pathways. These results establish interface dielectric engineering in vdW heterostructures as an effective strategy for tailoring the radiative dynamics and brightness of quantum emitters in atomically thin materials.
We investigate the air-induced degradation of few-layer hafnium diselenide (HfSe$_2$) through combined experimental and theoretical approaches. AFM and SEM reveal the formation of selenium-rich spherical features upon ambient exposure, while EDS confirms Se segregation. \textit{Ab initio} molecular dynamics simulations show that Se atoms migrate to flake edges and that O/O$_2$ exposure leads to selective Hf oxidation, breaking Se--Hf bonds and expelling Se atoms. No stable Se--O bonds are observed, indicating structural reorganization rather than oxidation. These findings emphasize the material's instability in air and the importance of encapsulation for preserving HfSe$_2$ in practical applications. Scanning tunneling spectroscopy confirms the semiconducting character of the nanoparticles, with an electronic bandgap compatible with that of elemental Se. These results highlight the critical role of lattice defects and oxidation dynamics in the degradation process and underscore the need for encapsulation strategies to preserve the integrity of HfSe$_2$-based devices.
Biotite crystals are phyllosilicate trioctahedral micas with the general chemical formula K(Mg,Fe)3AlSi3O10(OH)2 that form a solid-solution series with iron-poor phlogopite and iron-rich annite endmembers. With a wide band gap energy and a layered structure with free surface charges, biotite nanosheets can be readily obtained by cleavage methods and used as dielectrics in nanodevice fabrication for the next generation of electronics and energy harvesting. Here, a comprehensive study of biotite samples with different iron concentrations and oxidation states is presented. Structural, optical, magneto-optical, and magnetic characterizations were performed using several experimental techniques, including state-of-the-art synchrotron-based techniques, to correlate the iron chemistry (content and oxidation state) with the macroscopic properties of both minerals. The study reveals a nanoscale-homogeneous Fe distribution via synchrotron X-ray fluorescence mapping, defect-mediated optical transitions modulated by Fe3+/Fe2+ ratios, and temperature-dependent magnetic transitions from paramagnetism to competing ferro-/antiferromagnetic interactions. Furthermore, the use of these biotite crystals as substrates for ultrathin heterostructures incorporating monolayer (ML) MoSe2 is explored by magneto photoluminescence at cryogenic temperatures. The results show that the presence of iron impurities in different oxidation states significantly impacts the valley properties for ML-MoSe2. Overall, these findings offer a comprehensive interpretation of the physical properties of bulk biotites in a correlative approach, serving as a robust reference for future studies aiming to explore biotites in their ultrathin form.
Van der Waals heterostructures (vdWHs) composed of transition-metal dichalcogenides (TMDs) and layered magnetic semiconductors offer great opportunities to manipulate exciton and valley properties of TMDs. Here, we present magneto-photoluminescence (PL) studies in a WSe2 monolayer (ML) on a CrSBr crystal, an anisotropic layered antiferromagnetic semiconductor. Our results reveal unique behavior of each of the ML-WSe2 PL peaks under magnetic field that is distinct from the pristine case. An intriguing feature is the clear enhancement of the PL intensity that we observe each time the external magnetic field tunes the energy of an exciton in CrSBr into resonance with one of the optical states of WSe2. This result suggests a magnetic field-controlled resonant energy transfer (RET) beyond other effects reported in similar structures. Our work provides deep insight on the importance of different mechanisms into magnetic vdWHs and underscores its great potential for light harvesting and emission enhancement of two-dimensional materials.
This study demonstrates that two-dimensional talc, a naturally abundant mineral, supports hyperbolic phonon-polaritons (HPhPs) at mid-infrared wavelengths, thus offering a low-cost alternative to synthetic polaritonic materials. Using scattering scanning near-field optical microscopy (s-SNOM) and synchrotron infrared nano spectroscopy (SINS), we reveal tunable HPhP modes in talc flakes of a long lifetime. These results highlight the potential of natural 2D talc crystals to constituting an effective platform for establishing scalable optoelectronic and photonic devices.
Two-dimensional heterostructures have been crucial in advancing optoelectronic devices utilizing van der Waals materials. Semiconducting transition metal dichalcogenide monolayers, known for their unique optical properties, offer extensive possibilities for light-emitting devices. Recently, a memory-driven optical device, termed a Mem-emitter, was proposed using these monolayers atop dielectric substrates. The successful realization of such devices heavily depends on selecting the optimal substrate. Here, we report a pronounced memory effect in a MoSe$_2$/clinochlore device, evidenced by electric hysteresis in the intensity and energy of MoSe$_2$ monolayer emissions. This demonstrates both population-driven and transition-rate-driven Mem-emitter abilities. Our theoretical approach correlates these memory effects with internal state variables of the substrate, emphasizing that clinochlore layered structure is crucial for a robust and rich memory response. This work introduces a novel two-dimensional device with promising applications in memory functionalities, highlighting the importance of alternative insulators in fabricating van der Waals heterostructures.
Naturally occurring van der Waals (vdW) materials are currently attracting significant interest due to their potential as low-cost sources of two-dimensional materials. Valuable information on vdW materials' interlayer interactions is present in their low-frequency rigid-layer phonon spectra, which are experimentally accessible by terahertz spectroscopy techniques. In this work, we have used polarization-sensitive terahertz time-domain spectroscopy to investigate a bulk sample of the naturally abundant, large bandgap vdW mineral clinochlore. We observed a strong and sharp anisotropic resonance in the complex refractive index spectrum near 1.13 THz, consistent with our density functional theory predictions for shear modes. Polarimetry analysis revealed that the shear phonon anisotropy reshapes the polarization state of transmitted THz waves, inducing Faraday rotation and ellipticity. Furthermore, we used Jones formalism to discuss clinochlore phononic symmetries and describe our observations in terms of its eigenstates of polarization. These results highlight the potential of exploring vdW minerals as central building blocks for vdW heterostructures with compelling technological applications.
Biotite, an iron-rich mineral belonging to the trioctahedral mica group, is a naturally abundant layered material (LM) exhibiting attractive electronic properties for application in nanodevices. Biotite stands out as a non-degradable LM under ambient conditions, featuring high-quality basal cleavage, a significant advantage for van der Waals heterostructure (vdWH) applications. In this work, we present the micro-mechanical exfoliation of biotite down to monolayers (1Ls), yielding ultrathin flakes with large areas and atomically flat surfaces. To identify and characterize the mineral, we conducted a multi-elemental analysis of biotite using energy-dispersive spectroscopy mapping. Additionally, synchrotron infrared nano-spectroscopy was employed to probe its vibrational signature in few-layer form, with sensitivity to the layer number. We have also observed good morphological and structural stability in time (up to 12 months) and no important changes in their physical properties after thermal annealing processes in ultrathin biotite flakes. Conductive atomic force microscopy evaluated its electrical capacity, revealing an electrical breakdown strength of approximately 1 V/nm. Finally, we explore the use of biotite as a substrate and encapsulating LM in vdWH applications. We have performed optical and magneto-optical measurements at low temperatures. We find that ultrathin biotite flakes work as a good substrate for 1L-MoSe2, comparable to hexagonal boron nitride flakes, but it induces a small change of the 1L-MoSe2 g-factor values, most likely due to natural impurities on its crystal structure. Furthermore, our results show that biotite flakes are useful systems to protect sensitive LMs such as black phosphorus from degradation for up to 60 days in ambient air. Our study introduces biotite as a promising, cost-effective LM for the advancement of future ultrathin nanotechnologies.
Phyllosilicate minerals are an emerging class of naturally occurring layered insulators with large bandgap energy that have gained attention from the scientific community. This class of lamellar materials has been recently explored at the ultrathin two-dimensional level due to their specific mechanical, electrical, magnetic, and optoelectronic properties, which are crucial for engineering novel devices (including heterostructures). Due to these properties, phyllosilicates minerals can be considered promising low-cost nanomaterials for future applications. In this Perspective article, we will present relevant features of these materials for their use in potential 2D-based electronic and optoelectronic applications, also discussing some of the major challenges in working with them.
Phyllosilicates emerge as a promising class of large bandgap lamellar insulators. Their applications have been explored from fabrication of graphene-based devices to 2D heterostructures based on transition metal dicalcogenides with enhanced optical and polaritonics properties. In this review, we provide an overview on the use of IR s-SNOM for studying nano-optics and local chemistry of a variety of 2D natural phyllosilicates. Finally, we bring a brief update on applications that combine natural lamellar minerals into multifunctional nanophotonic devices driven by electrical control.
Single layers of transition metal dichalcogenides, such as WSe$_2$ have gathered increasing attention due to their intense electron-hole interactions, being considered promising candidates for developing novel optical applications. Within the few-layer regime, these systems become highly sensitive to the surrounding environment, enabling the possibility of using a proper substrate to tune desired aspects of these atomically-thin semiconductors. In this scenario, the dielectric environment provided by the substrates exerts significant influence on electronic and optical properties of these layered materials, affecting the electronic band-gap and the exciton binding energy. However, the corresponding effect on the luminescence of transition metal dichalcogenides is still under discussion. To elucidate these impacts, we used a broad set of materials as substrates for single-layers of WSe$_2$, enabling the observation of these effects over a wide range of electrical permittivities. Our results demonstrate that an increasing permittivity induces a systematic red-shift of the optical band-gap of WSe$_2$, intrinsically related to a considerable reduction of the luminescence intensity. Moreover, we annealed the samples to ensure a tight coupling between WSe$_2$and its substrates, reducing the effect of undesired adsorbates trapped in the interface. Ultimately, our findings reveal how critical the annealing temperature can be, indicating that above a certain threshold, the heating treatment can induce adverse impacts on the luminescence. Furthermore, our conclusions highlight the influence the dielectric properties of the substrate have on the luminescence of WSe$_2$, showing that a low electrical permittivity favours preserving the native properties of the adjacent monolayer
Talc is an insulating layered material that is stable at ambient conditions and has high-quality basal cleavage, which is a major advantage for its use in van der Waals heterostructures. Here, we use near-field synchrotron infrared nanospectroscopy, Raman spectroscopy, and first-principles calculations to investigate the structural and vibrational properties of talc crystals, ranging from monolayer to bulk, in the 300-750 cm-1 and <60 cm-1 spectral windows. We observe a symmetry crossover from mono to bilayer talc samples, attributed to the stacking of adjacent layers. The in-plane lattice parameters and frequencies of intralayer modes of talc display weak dependence with the number of layers, consistent with a weak interlayer interaction. On the other hand, the low-frequency (<60 cm-1) rigid-layer (interlayer) modes of talc are suitable to identify the number of layers in ultrathin talc samples, besides revealing strong in-plane and out-of-plane anisotropy in the interlayer force constants and related elastic stiffnesses of single crystals. The shear and breathing force constants of talc are found to be 66% and 28%, respectively, lower than those of graphite, making talc an excellent lubricant that can be easily exfoliated. Our results broaden the understanding of the structural and vibrational properties of talc at the nanoscale regime and serve as a guide for future ultrathin heterostructures applications.
Phyllosilicate minerals, which form a class of naturally occurring layered materials (LMs), have been recently considered as a low-cost source of two-dimensional (2D) materials. Clinochlore [Mg5Al(AlSi3)O10(OH)8] is one of the most abundant phyllosilicate minerals in nature, exhibiting the capability to be mechanically exfoliated down to a few layers. An important characteristic clinochlore is the natural occurrence of defects and impurities which can strongly affect their optoelectronic properties, possibly in technologically interesting ways. In the present work, we carry out a thorough investigation of the clinochlore structure on both bulk and 2D exfoliated forms, discussing its optical features and the influence of the insertion of impurities on its macroscopic properties. Several experimental techniques are employed, followed by theoretical first-principles calculations considering several types of naturally-ocurring transition metal impurities in the mineral lattice and their effect on electronic and optical properties. We demonstrate the existence of requirements concerning surface quality and insulating properties of clinochlore that are mandatory for its suitable application in nanoelectronic devices. The results presented in this work provide important informations for clinochlore potential applications and establish a basis for further works that intend to optimize its properties to relevant 2D technological applications through defect engineering.
Naturally occurring van der Waals crystals have brought unprecedented interest to nanomaterial researchers in recent years. So far, more than 1800 layered materials (LMs) have been identified but only a few insulating and naturally occurring LMs were deeply investigated. Phyllosilicate minerals, which are a class of natural and abundant LMs, have been recently considered as a low-cost source of insulating nanomaterials. Within this family an almost barely explored material emerges: phlogopite [KMg3(AlSi3)O10(OH)2]. Here we carry out a high throughput characterization of this LM by employing several experimental techniques, corroborating the major findings with first-principles calculations. We show that monolayers (1L) and few-layers of this material are air and temperature stable, as well as easily obtained by the standard mechanical exfoliation technique, have an atomically flat surface, and lower bandgap than its bulk counterpart, an unusual trend in LMs. We also systematically study the basic properties of ultrathin phlogopite and demonstrate that natural phlogopite presents iron impurities in its crystal lattice, which decreases its bandgap from about 7 eV to 3.6 eV. Finally, we combine phlogopite crystals with 1L-WS2 in ultrathin van der Waals heterostructures and present a photoluminescence study, revealing a significant enhancement on the 1L-WS2 optical quality (i.e., higher recombination efficiency through neutral excitons) similarly to that obtained on 1L-WS2/hBN heterostructures. Our proof-of-concept study shows that phlogopite should be regarded as a good and promising candidate for LM-based applications as a low-cost layered nanomaterial.
We investigated experimentally the valley Zeeman splitting of excitonic peaks in the photoluminescence (PL) spectra of high-quality hBN/WS2/MoSe2/hBN heterostructures at near-zero twist angles under perpendicular magnetic fields up to 20 T. We identify two neutral exciton peaks in the PL spectra: the lower energy one exhibits a reduced g-factor relative to that of the higher energy peak, and much lower than the recently reported values for interlayer excitons in other van der Waals (vdW) heterostructures. We provide evidence that such a discernible g-factor stems from the spatial confinement of the exciton in the potential landscape created by the moire pattern, due tolattice mismatch and/or inter-layer twist in heterobilayers. This renders magneto-PL an important tool to reach deeper understanding of the effect of moire patterns on excitonic confinement in vdW heterostructures.
The exploitation of phonon-polaritons in nanostructured materials offers a pathway to manipulate infrared (IR) light for nanophotonic applications. Notably, hyperbolic phonons polaritons (HP2) in polar bidimensional crystals have been used to demonstrate strong electromagnetic field confinement, ultraslow group velocities, and long lifetimes (~ up to 8 ps). Here we present nanobelts of α-phase molybdenum trioxide (α-MoO3) as a low-dimensional medium supporting HP2 modes in the mid- and far-IR ranges. By real-space nanoimaging, with IR illuminations provided by synchrotron and tunable lasers, we observe that such HP2 response happens via formation of Fabry-Perot resonances. We remark an anisotropic propagation which critically depends on the frequency range. Our findings are supported by the convergence of experiment, theory, and numerical simulations. Our work shows that the low dimensionality of natural nanostructured crystals, like α-MoO3 nanobelts, provides an attractive platform to study polaritonic light-matter interactions and offer appealing cavity properties that could be harnessed in future designs of compact nanophotonic devices.
In analogy to the observed for single plasmon-polaritons, we show that subdiffractional hyperbolic phonon-polariton (HP2) modes confined in hexagonal boron nitride (hBN) nanocrystals feature wave-particle duality. First, we use Synchrotron Infrared Nanospectroscopy to demonstrate modulation of the HP2 frequency-momentum dispersion relation and group velocity by varying the thickness of the SiO2 layer in the heterostructure hBN/SiO2/Au. These modulations are, then, exploited for the hBN crystal lying on a SiO2 wedge, with a gradient of thickness of such a dielectric medium, built into the Au substrate. Simulations show that a phonon-polariton pulse accelerates as the thickness of the wedge increases. This is explained by a parameter-free semi-classical approach considering the pulse as free quantum particle. Within this picture, an estimated average acceleration value of ~ 1.45 10^18 m.s^(-2) is determined using experimental inputs. This estimation is in good agreement with the value of 2.0 10^18 m.s^(-2) obtained from the theory directly.