arXiv subjects

I. Simonsen

Publications and source records attributed to I. Simonsen.

15 recordsLinked to original sources

arXiv2021

Inversion of simulated and experimental light scattering data for characterization of two-dimensional randomly rough metal surfaces

An approach is presented for the inversion of simulated and experimental in-plane, co-polarized light scattering data in p and s polarization to obtain the normalized surface-height autocorrelation function and the rms-roughness of a two-dimensional randomly rough metal surface. The approach is based on an expression, obtained on the basis of second-order phase perturbation theory, for the contribution to the mean differential reflection coefficient from the light scattered diffusely by the rough surface. The inversion scheme is validated by using several sets of computer generated scattering data for rough silver surfaces defined by Gaussian surface height correlation functions. The reconstructions obtained by this approach are found to be rather accurate for weakly rough surfaces illuminated by p- and s-polarized incident light; this is also true in cases where the contributions to the input data from multiple scattering of surface plasmon polaritons is not insignificant. Finally, the inversion scheme is applied to experimental scattering data obtained for characterized two-dimensional randomly rough gold surfaces, and the results obtained in this way, compare favorably to what is obtained by directly analyzing the surface morphology. Such results testify to the attractiveness of the computationally efficient inversion scheme that we propose.

physics.optics↗

arXiv2020

Single scattering of polarized light by correlated surface and volume disorder

We study light scattering by systems combining randomly rough surface and volume dielectric fluctuations. We introduce a general model including correlations between surface and volume disorders, and we study the scattering properties within a single scattering approach. We identify different regimes of surface and volume dominated scattering depending on length scales characterizing the surface and volume disorders. For uncorrelated disorders, we discuss the polarization response of each source of disorder, and show how polarimetric measurements can be used to separate the surface and volume contributions in the total measured diffusely scattered intensity. For correlated systems, we identify two configurations of volume disorder which, respectively, couple weakly or strongly to surface scattering via surface-volume cross-correlations. We illustrate these effects on different configurations exhibiting interference patterns in the diffusely scattered intensity, which may be of interest for the characterization of complex systems or for the design of optical components by engineering the degree of surface-volume correlations.

physics.optics↗

arXiv2017

Predicting changes in visual appearance of periodic surface from brdf measurements

The present study focuses on the optical properties of functionalized surfaces and how the surface geometry impacts them. Physical measurements of reflected light are required to understand the visual aspect of such surfaces. Bidirectional Reflection Distribution Function (BRDF) is evaluated in order to identify and understand physical effects induced by different surface functionalization. BRDF measurements of high angular resolution allow us to observe diffraction phenomenon at an unusual scale. Experimental results were compared to theoretical calculation, and then diffraction effect was confirmed. This study stresses that diffractive phenomenon could have an impact on visual aspect even for simple pattern geometry. In the same way, if more complex periodic patterns are considered, as multistate periodicity pattern for example, it could rise to important modification of surface visual aspect.

cond-mat.mtrl-sci↗

arXiv2012

Plasmonic resonances at interfaces patterned by nanoparticle lattices

We present theoretical studies of the nature of the collective plasmon resonances of surfaces upon which ordered lattices of spherical metallic particles have been deposited. The collective plasmon modes, excited by light incident on the surface, are explored for both square and rectangular lattices of particles. The particular resonances excited by an incident beam of light depend on the frequency, polarization, and angles of incidence. We show that one can create surfaces for which the polarization of the reflected light is frequency dependent. The form of the polarization dependent spectra can be tuned by choosing materials and the parameters of the nanoparticle array.

physics.optics↗

arXiv2011

Keynesian Economics After All

It is demonstrated that the US economy has on the long-term in reality been governed by the Keynesian approach to economics independent of the current official economical policy. This is done by calculating the two-point correlation function between the fluctuations of the DJIA and the US public debt. We find that the origin of this condition is mainly related to the wars that the USA has fought during the time period investigated. Wars mean a large influx of public money into the economy, thus as a consequence creating a significant economical upturn in the DJIA. A reason for this straight-cut result of our analysis, is that very few wars have been fought on US-territory and those that have, were in the 18th century, when the partial destruction of cities, factories, railways and so on, was more limited and with less effect on the over-all economy.

q-fin.GN↗

arXiv2008

Characterisation of nanostructured GaSb : Comparison between large-area optical and local direct microscopic techniques

Low energy ion-beam sputtering of GaSb results in self-organized nanostructures, with the potential of structuring large surface areas. Characterisation of such nanostructures by optical methods is studied and compared to direct (local) microscopic methods. The samples consist of densely packed GaSb cones on bulk GaSb, approximately 30, 50 and 300 nm in height, prepared by sputtering at normal incidence. The optical properties are studied by spectroscopic ellipsometry, in the range 0.6-6.5 eV, and with Mueller matrix ellipsometry in the visible range, 1.46-2.88 eV. The optical measurements are compared to direct topography measurements obtained by Scanning Electron Microscopy (SEM), High Resolution Transmission Electron Microscopy (HR-TEM), and Atomic Force Microscopy (AFM). Good agreement is achieved between the two classes of methods when the experimental optical response of the short cones (<55 nm) is inverted with respect to topological surface information via a graded anisotropic effective medium model. The main topological parameter measured was the average cone height, but estimates of typical cone shape and density (in terms of volume fractions) were also obtained. The graded anisotropic effective medium model treats the cones as a stack of concentric cylinders (discs) of non-increasing radii. Optical methods are shown to represent a valuable characterization tool for nanostructured surfaces, in particular when large coverage area is desirable. Due to the fast and non-destructive properties of optical techniques, they may readily be adapted to in-situ configurations.

physics.optics↗

arXiv2008

Optical properties of nanostructured GaSb

Optical measurements of nanostructured GaSb prepared by sputtering is presented. The optical response is studied by Mueller Matrix Ellipsometry (MME) in the visible range (430--850nm), and by spectroscopic ellipsometry in the range 0.6--6.5eV. The nano-structured surfaces reported in this work, consist of densely packed GaSb cones approximately 50nm high, on bulk GaSb. The nanostructured surfaces are here shown to considerably modify the optical response of the surface, hence giving a strong sensitivity to the far field spectroscopic (Mueller matrix) ellipsometric measurements. The off-specular scattering and the depolarization is found to be low. The anisotropic response is particularly emphasized by studying nano-structured GaSb cones approximately 45 degrees tilted with respect to the surface normal. In the latter case, one observes upon rotating the sample around the surface normal, that the Mueller matrix elements $m_{13}$ and $m_{14}$ oscillate as a function of the rotation angle. Finally, Mueller matrix techniques have been applied to the measured data, in order to analyze the acquired Mueller matrix in terms of physical realizability and noise.

physics.optics↗

arXiv2006

Optimal Investment Horizons for Stocks and Markets

The inverse statistics is the distribution of waiting times needed to achieve a predefined level of return obtained from (detrended) historic asset prices \cite{optihori,gainloss}. Such a distribution typically goes through a maximum at a time coined the {\em optimal investment horizon}, $τ^*_ρ$, which defines the most likely waiting time for obtaining a given return $ρ$. By considering equal positive and negative levels of return, we reported in \cite{gainloss} on a quantitative gain/loss asymmetry most pronounced for short horizons. In the present paper, the inverse statistics for 2/3 of the individual stocks presently in the DJIA is investigated. We show that this gain/loss asymmetry established for the DJIA surprisingly is {\em not} present in the time series of the individual stocks nor their average. This observation points towards some kind of collective movement of the stocks of the index (synchronization).

physics.soc-ph↗

arXiv2005

Inverse Statistics for Stocks and Markets

In recent publications, the authors have considered inverse statistics of the Dow Jones Industrial Averaged (DJIA) [1-3]. Specifically, we argued that the natural candidate for such statistics is the investment horizons distribution. This is the distribution of waiting times needed to achieve a predefined level of return obtained from detrended historic asset prices. Such a distribution typically goes through a maximum at a time coined the {\em optimal investment horizon}, $τ^*_ρ$, which defines the most likely waiting time for obtaining a given return $ρ$. By considering equal positive and negative levels of return, we reported in [2,3] on a quantitative gain/loss asymmetry most pronounced for short horizons. In the present paper, this gain/loss asymmetry is re-visited for 2/3 of the individual stocks presently in the DJIA. We show that this gain/loss asymmetry established for the DJIA surprisingly is {\em not} present in the time series of the individual stocks. The most reasonable explanation for this fact is that the gain/loss asymmetry observed in the DJIA as well as in the SP500 and Nasdaq are due to movements in the market as a whole, {\it i.e.}, cooperative cascade processes (or ``synchronization'') which disappear in the inverse statistics of the individual stocks.

physics.soc-ph↗

arXiv2004

Inverse Statistics in the Foreign Exchange Market

We investigate intra-day foreign exchange (FX) time series using the inverse statistic analysis developed in [1,2]. Specifically, we study the time-averaged distributions of waiting times needed to obtain a certain increase (decrease) $\rho$ in the price of an investment. The analysis is performed for the Deutsch mark (DM) against the $US for the full year of 1998, but similar results are obtained for the Japanese Yen against the $US. With high statistical significance, the presence of "resonance peaks" in the waiting time distributions is established. Such peaks are a consequence of the trading habits of the markets participants as they are not present in the corresponding tick (business) waiting time distributions. Furthermore, a new {\em stylized fact}, is observed for the waiting time distribution in the form of a power law Pdf. This result is achieved by rescaling of the physical waiting time by the corresponding tick time thereby partially removing scale dependent features of the market activity.

cond-mat.other↗

arXiv2001

Design of one-dimensional Lambertian diffusers of light

We describe a method for designing a one-dimensional random surface that acts as a Lambertian diffuser. The method is tested by means of rigorous computer simulations and is shown to yield the desired scattering pattern.

cond-mat.dis-nn↗

arXiv1999

The Design of Random Surfaces with Specified Scattering Properties: Surfaces that Suppress Leakage

We present a method for generating a one-dimensional random metal surface of finite length L that suppresses leakage, i.e. the roughness-induced conversion of a surface plasmon polariton propagating on it into volume electromagnetic waves in the vacuum above the surface. Perturbative and numerical simulation calculations carried out for surfaces generated in this way show that they indeed suppress leakage.

cond-mat.dis-nn↗

arXiv1999

Random Surfaces that Suppress Single Scattering

We present a method for generating numerically a one-dimensional random surface, defined by the equation $x_3 = \zx$, that suppresses single-scattering processes in the scattering of light from it within a specified range of scattering angles. Rigorous numerical calculations of the scattering of light from surfaces generated by this approach show that the single-scattering contribution to the mean scattered intensity is indeed suppressed within that range of angles.

cond-mat.dis-nn↗

arXiv1998

Numerical simulation of electromagnetic wave scattering from planar dielectric films deposited on rough perfectly conducting substrates

Electromagnetic wave scattering from planar dielectric films deposited on one-dimensional, randomly rough, perfectly conducting substrates is studied by numerical simulations for both p- and s-polarization. The reduced Rayleigh equation, which is the integral equation satisfied by the scattering amplitude after eliminating the fields inside the film, is the starting point for the simulation. This equation is solved numerically by considering a random surface of finite length, and by introducing wave number cut-offs in the evanescent part of the spectrum. Upon discretization, a system of linear equations is obtained, and by solving this matrix system for an ensemble of surface realizations, the contribution to the mean differential reflection coefficient from the incoherently scattered field, $<\partial R_\nu/\partial \theta>_{incoh}$ (\nu=p,s), is obtained nonperturbatively. It is demonstrated that when the scattering geometry supports at least two guided waves, $<\partial R_\nu/\partial \theta>_{incoh}$, has, in addition to the well known enhanced backscattering peak, well-defined satellite peaks in agreement with theory, for most of the parameters considered.

cond-mat↗

arXiv1995

A Review of Minimal Supersymmetric Electro-Weak Theory

In this review article we study the Minimal Supersymmetric Electro-Weak theory (of leptons). The Lagrangian is constructed step by step in great detail, both in the superfield and component field formalism --- both on and off shell. Furthermore the Lagrangian is written in the more familiar four component formalism. Electro weak symmetry breaking is discussed, and the physical chargino- and neutralino states are introduced and discussed.

hep-ph↗