arXiv subjects

Hyun Myung

Publications and source records attributed to Hyun Myung.

At least 19 recordsLinked to original sources

arXiv2026

Reflection-Robust Stereo Visual-Inertial Odometry via Kalman-Filtered Ground-Height Estimation

Visual-inertial odometry relies on visual features that correspond to 3D points with consistent projections across sequential frames. In reflective indoor-floor environments, however, specular floor patterns can be detected and triangulated as virtual features below the physical ground plane, producing unreliable feature associations and inconsistent visual residuals. This paper proposes a lightweight reflection-aware front-end for feature-based stereo VIO. Rather than suppressing all floor-region features, the proposed method estimates the ground height in real time and rejects only feature candidates whose inferred 3D positions are below the estimated ground height. A floor-region mask restricts the validation process to reflection-prone regions, while stereo height uncertainty and pose uncertainty are used to construct frame-level ground-height measurements. A scalar Kalman filter with Normalized Innovation Squared (NIS) gating then provides a stable ground-height estimate, and an uncertainty-aware safety margin is used for selective below-ground virtual feature rejection. Experiments on real reflective-floor indoor sequences show that the proposed front-end generally improves trajectory accuracy in reflection-dominant environments while maintaining accurate ground-height estimates and recovering from actual ground-height changes.

cs.RO↗

arXiv2026

MAPO: Mixture of Experts with Alternating Policy Optimization for Universal Humanoid Motion Tracking

Universal humanoid motion tracking is essential for enabling humanoid robots to perform diverse tasks in human environments. To capture the wide diversity of human motions, mixture-of-experts (MoE) policies have been widely adopted, leveraging dynamic routing to enhance policy expressiveness. However, we identify that divergence between old and updated policies can be misestimated during policy-gradient updates of MoE policies, due to their dynamic routing. Because most policy-gradient algorithms regulate policy updates based on the divergence, this misestimation can lead to either overly conservative or excessively large updates, which can yield a suboptimal policy. In this paper, we propose Mixture of Experts with Alternating Policy Optimization (MAPO), which alternately optimizes the router and the experts to avoid the divergence misestimation. MAPO consistently tracks 182 motions that PPO with MoE fails to track, whereas PPO with MoE tracks only one motion that MAPO fails to track. MAPO also attains the highest tracking success rate among the compared methods and the lowest tracking error across most error metrics, demonstrating its superior performance. Videos can be found on the project website: https://mapo-corl2026.github.io/MAPO/

cs.RO↗

arXiv2026

2DGS-Planner: Rasterization-based Path Planning in 2D Gaussian Splatting Map

Gaussian splatting provides an explicit and efficiently rasterizable scene representation for robot navigation. However, individual Gaussian primitives may not reliably represent obstacles as they are jointly optimized through alpha-composited rendering from a finite set of reconstruction views. We propose 2DGS-Planner, a path planner for ground robots that reads planning-relevant geometry from a 2D Gaussian splatting (2DGS) map through rasterization, rather than treating individual Gaussian primitives as obstacles. During offline roadmap construction, multi-view attribution converts rendered normal dispersion into structural scores for non-ground disks supported by the reconstruction views. These scores guide adaptive node sampling on the ground. Path-aligned orthographic queries validate candidate edges, while cylindrical queries estimate local clearance fields that are cached on the edges. During online planning, graph search initializes a route, and path refinement reuses the cached fields while accounting for the robot's dimensions and ground constraints. Experiments demonstrate improved roadmap connectivity, more accurate clearance estimation, and higher planning success compared with the tested baselines. These results support rasterization as an effective geometric query interface for planning directly on Gaussian maps. Code and data are available at https://2dgs-planner.github.io/

cs.RO↗

arXiv2026

NM-LIO: Multiple LiDAR-Inertial Odometry Addressing LiDAR Measurement Noise Discrepancy

Multiple LiDAR-inertial odometry methods have been widely applied in robotic applications owing to their enhanced accuracy and reliability. However, adopting multiple LiDAR systems can be challenging due to the discrepancies in measurement noise across different LiDARs. Existing methods have typically overlooked the noise discrepancies, which can significantly affect accuracy. In this paper, we propose Noise-aware Multiple LiDAR-Inertial Odometry (NM-LIO) that addresses the noise discrepancies. We integrate a noise model to quantify the measurement noise of each LiDAR. Additionally, we estimate the uncertainty of the residuals based on the measurement noise, allowing the measurement model to capture the noise discrepancies. Our proposed method is evaluated on a public multiple LiDAR dataset and compared with state-of-the-art methods. The experimental results demonstrate that the proposed method can accurately estimate the odometry in various environments by accounting for the noise discrepancies.

cs.RO↗

arXiv2026

Online Target-less Radar-LiDAR-Camera Extrinsic Calibration via Joint Optimization

Fusing radar, LiDAR, and camera enables robust perception in diverse and adverse conditions, but the fusion performance critically depends on accurate extrinsic calibration among the three sensors. In this paper, we address the problem of online target-less extrinsic calibration for the radar-LiDAR-camera system. Existing target-less methods are mostly designed for a single sensor pair, and composing the pairwise results does not guarantee consistency across the three sensors. Moreover, the sparse and noisy radar measurements make the radar-involving pairs unreliable. To tackle these challenges, we propose a joint calibration framework that constructs residuals for each sensor pair and optimizes the extrinsics of all pairs together to minimize the overall residual. Furthermore, we introduce an adaptive radar noise filter that rejects spurious radar returns using a range-dependent margin, and a correspondence accumulation strategy that aggregates sparse radar correspondences over frames. We validate our method on an in-house radar-LiDAR-camera dataset covering diverse urban environments, where it reduces calibration errors across all sensor pairs over a state-of-the-art camera-LiDAR baseline.

cs.RO↗

arXiv2026

VIGOR: Zero-Shot Visual Generalization via Latent-Space Consistency in Model-Based Reinforcement Learning

Model-based reinforcement learning (MBRL) achieves strong sample efficiency by planning within learned latent dynamics, yet its performance degrades substantially under unseen visual distractions such as background variations, lighting changes, or camera shifts. Unlike model-free RL, where encoder perturbations affect only single-step predictions, MBRL suffers from a two-level vulnerability: visual distractions first push encoder outputs out of distribution, and these errors then compound through recursive latent rollouts over the planning horizon. We propose visual generalization via latent-space consistency in model-based RL (VIGOR), a framework that enables zero-shot generalization to unseen visual distractions while retaining the sample efficiency of its MBRL backbone. VIGOR integrates three interdependent components: (i) asymmetric weak-to-strong augmentation, which pairs weak-only and weak-to-strong latent views within a single batch; (ii) dynamics-level consistency, which enforces augmentation-invariant transition predictions through direct latent regression; and (iii) encoder-level stabilization, which prevents encoder drift under the cross-augmentation supervision imposed by dynamics-level consistency. Evaluations on the DeepMind Control Suite (DMC) and Robosuite show that VIGOR outperforms state-of-the-art model-free and model-based baselines, surpassing the second-best baseline by 3.4% on DMC and 43.6% on Robosuite. Ablations further show that VIGOR's robustness is augmentation-agnostic: replacing the default augmentation with alternatives from distinct perturbation families preserves strong generalization, confirming that latent-space consistency, not the augmentation choice, drives robustness.

cs.AI↗

arXiv2026

Robust Structureless Monocular Visual Inertial Initialization Exploiting Line Features and Vanishing Points

Accurate initialization is essential for reliable visual-inertial odometry (VIO), but it is often ill-conditioned under degenerate motions. Existing methods typically require restrictive excitation motions to ensure sufficient observability or rely on computationally expensive 3D structure reconstruction, limiting efficient and practical deployment. To address these limitations, we propose SLIM-init, a structureless monocular VIO initializer that directly exploits geometric constraints from tracked 2D line features without explicit 3D landmark reconstruction. Specifically, SLIM-init leverages line-derived vanishing points (VPs) as translation-invariant orientation cues to provide robust rotation-only constraints under degenerate scenarios such as low-parallax or translation-dominant motions. It further incorporates a line epipolar residual to constrain translation and a line-normal projection residual to improve the conditioning of linear alignment, enhancing the accuracy and robustness of initial state estimation. Extensive experiments on a public benchmark and challenging custom degenerate-motion sequences demonstrate improved accuracy and robustness over state-of-the-art initialization methods. The source code is available at: https://github.com/cjunwan/SLIM-init.

cs.RO↗

arXiv2026

NeuDonatello: Uncertainty-Aware Framework for Accurate Neural SDF Learning

Neural surface reconstruction has emerged as a powerful paradigm for recovering high-quality 3D surfaces from multi-view images. However, recovering accurate geometry solely from RGB images remains challenging due to uncertainties arising from textureless regions, occlusions, and inherent scene ambiguities. Existing methods often overlook such uncertainties, leading to inaccurate estimates of the signed distance function (SDF). We introduce NeuDonatello, a novel framework that models and leverages SDF uncertainty to improve surface reconstruction. Central to our approach is to model spatially varying uncertainty using a Monte Carlo sampling strategy. Using this uncertainty, we develop an adaptive regularization that selectively strengthens geometric constraints where RGB supervision is unreliable, avoiding incorrect surface reconstruction. We further introduce an uncertainty-aware scale parameter for the SDF-to-density conversion. Conditioned on uncertainty, this design enables more accurate modeling of spatially varying densities. Extensive experiments demonstrate that NeuDonatello achieves state-of-the-art reconstruction accuracy, with robust performance across diverse scenes using only posed RGB images.

cs.CV↗

arXiv2026

Contextrast++: Robust Multi-Scale Contextual Contrastive Learning for Semantic Segmentation

Semantic segmentation has rapidly advanced with deep learning; however, challenges remain in effectively capturing local and global contexts as well as addressing the long-tailed distribution problem. To tackle these issues, we present Contextrast++, a robust contrastive learning method for semantic segmentation that improves multi-scale feature integration and mitigates class imbalance issues. Our method consists of two key components: 1) contextual contrastive learning (CCL) and 2) boundary-aware negative (BANE) sampling. CCL includes three subcomponents: adaptive fusion module, pixel-to-anchor (PA) loss, and anchor-to-anchor (AA) loss. The adaptive fusion module dynamically balances local and global feature integration, resulting in a more context-aware representation. While the PA loss leverages the fused multi-scale features to improve feature representation learning, the AA loss focuses on addressing the long-tailed distribution problem by utilizing a memory bank that stores a fixed number of class-balanced representative anchors. Meanwhile, BANE sampling enhances segmentation precision by selecting hard negatives from misclassified boundary regions, which refines fine-grained details during contrastive learning. As verified in extensive experiments using public datasets, we demonstrate that Contextrast++ substantially improves semantic segmentation performance over existing contrastive learning-based state-of-the-art approaches, while introducing no additional computational overhead during inference.

cs.CV↗

arXiv2026

ASPIRE-VINS: Adaptive Spline-based Visual-inertial Navigation System With Robust 3D Measurement Residuals

Visual-inertial navigation systems estimate six-degree-of-freedom motion by fusing visual and inertial data. Modern discrete-time methods with IMU preintegration provide strong accuracy and efficiency, but keyframe-based representations can be less flexible when residuals must be evaluated at arbitrary timestamps or when motion-dependent temporal resolution is needed. Continuous-time splines address this issue by representing the trajectory as a smooth temporal function, but uniformly spaced knots can under-represent rapid dynamics or over-parameterize static intervals. This letter proposes ASPIRE-VINS, a continuous-time VINS framework that combines adaptive knot placement (AKP), multi-resolution splines (MRS), and 3D measurement-space residuals (3D-MSR). AKP allocates knots according to local motion variation, MRS adds bounded local refinement in tangent space, and 3D-MSR provides bearing consistency by aligning transformed features with calibrated observation rays in 3D measurement space. Experiments show that ASPIRE-VINS achieves competitive or lower trajectory errors than the compared baselines, demonstrating the effectiveness of motion-adaptive continuous-time trajectory modeling under diverse motion and sensing conditions.

cs.RO↗

arXiv2026

PLED-VINS: A Point-Line Event-Based Visual Inertial SLAM for Dynamic Environments

Dynamic environments remain a fundamental challenge for visual SLAM, where unreliable observations from moving objects and rapid motion degrade state estimation accuracy. Although event cameras preserve fine-grained spatio-temporal information, most existing event-based SLAM frameworks still assume static scenes and lack approaches to estimate the reliability of features. To this end, we propose PLED-VINS, a monocular event camera-based visual-inertial SLAM framework that enables robust state estimation in dynamic environments. We propose an entropy-recency score map to characterize the temporal reliability of both point and line features based on event temporal statistics. Concurrently, geometric reliability is estimated via a unified point-line robust bundle adjustment. Building upon these, we design an adaptive weighting strategy that fuses temporal and geometric reliability, including motion-conditioned reliability modeling for line features, to suppress unreliable observations. Experimental results demonstrate that PLED-VINS improves state estimation on the evaluated dynamic sequences with moving objects.

cs.RO↗

arXiv2026

LQ-rPPG: A Label-Quantized Coarse-to-Fine Learning Framework for Remote Physiological Measurement

Remote photoplethysmography (rPPG) enables non-contact measurement of physiological signals from facial videos, offering strong potential for remote healthcare and daily health monitoring. Driven by this potential, various deep learning-based rPPG methods have been proposed to improve rPPG estimation. However, previous deep learning-based rPPG methods have paid little attention to the quality of training labels and their impact on model learning. Contact-based PPG signals used as training labels often contain noise and variability caused by motion artifacts, inconsistent sensor contact, and morphological distortions. Such label inconsistency can lead models to overfit to the label noise and variability and consequently degrade generalization performance. To address this issue, we propose LQ-rPPG, a label-quantized coarse-to-fine learning framework for robust rPPG estimation. LQ-rPPG consists of a label quantization module and a coarse-to-fine rPPG estimation model. The label quantization module transforms continuous PPG signals into multi-bit quantized pseudo labels with reduced noise and variability. The coarse-to-fine estimation model progressively refines rPPG signals under hierarchical supervision guided by the multi-bit pseudo labels. This design alleviates overfitting to label-specific variations and enables the model to learn structured and consistent representations. As a result, LQ-rPPG achieves robust and generalizable rPPG estimation even under challenging conditions. Experiments on multiple benchmark datasets demonstrate that LQ-rPPG achieves strong performance in both intra- and cross-dataset evaluations, while reducing parameters and multiply-accumulate operations by 88% and 29%, respectively, and increasing throughput by 191%. The code is available at https://github.com/Anonymous-repo-code/LQ-rPPG.

cs.CV↗

arXiv2026

CLUE: Adaptively Prioritized Contextual Cues by Leveraging a Unified Semantic Map for Effective Zero-Shot Object-Goal Navigation

Zero-shot object-goal navigation (ZSON) is a challenging problem in robotics that requires a comprehensive understanding of both language and visual observations. Contextual cues from rooms and objects are critical, but their relative importance depends on the target: some objects are strongly tied to specific room types, while others are better predicted by nearby co-located objects. Existing methods overlook this distinction, leading to inefficient and inaccurate exploration. We present CLUE, a novel navigation framework that adaptively balances the use of contextual rooms and objects by leveraging commonsense knowledge extracted from an offline large language model (LLM). By estimating a target's association with room types using LLM, the agent prioritizes room cues for predictable objects and object cues for those with weak room associations. Our framework constructs a unified semantic value map that integrates both types of contextual information, adaptively weighted by the target's ambiguity to guide exploration. Combined with multi-viewpoint verification and an exploration strategy informed by contextual cues, CLUE achieves robust and efficient navigation. Extensive experiments in simulation and real-world deployments show that our method consistently outperforms state-of-the-art baselines in both success rate (SR) and success weighted by path length (SPL), demonstrating its effectiveness and practicality for real-world navigation tasks.

cs.RO↗

arXiv2026

Raymoval: Raycasting-based Dynamic Object Removal for Static 3D Mapping

Static mapping is fundamental to robot navigation, providing a persistent geometric prior and a consistent reference for long-term autonomy. However, dynamic objects leave residual traces and cause surface loss, which reduces map consistency. We propose a raycasting-based module for dynamic object removal in static 3D mapping. Each scan is projected onto an azimuth-elevation grid, and for every viewing direction we compare the bin-wise minimum range with the map's first-hit distance computed by raycasting. Furthermore, we apply a raycast consistency test that separates dynamic from static points. Finally, a spatial consistency validation step refines labels, producing static maps with lower residual dynamics and reduced over-removal. We evaluate our approach quantitatively and qualitatively on SemanticKITTI and a challenging custom dataset, and show consistent static mapping results.

cs.RO↗

arXiv2026

GaussianFlow SLAM: Monocular Gaussian Splatting SLAM Guided by GaussianFlow

Gaussian splatting has recently gained traction as a compelling map representation for SLAM systems, enabling dense and photo-realistic scene modeling. However, its application to monocular SLAM remains challenging due to the lack of reliable geometric cues from monocular input. Without geometric supervision, mapping or tracking could fall in local-minima, resulting in structural degeneracies and inaccuracies. To address this challenge, we propose GaussianFlow SLAM, a monocular 3DGS-SLAM that leverages optical flow as a geometry-aware cue to guide the optimization of both the scene structure and camera poses. By encouraging the projected motion of Gaussians, termed GaussianFlow, to align with the optical flow, our method introduces consistent structural cues to regularize both map reconstruction and pose estimation. Furthermore, we introduce normalized error-based densification and pruning modules to refine inactive and unstable Gaussians, thereby contributing to improved map quality and pose accuracy. Experiments conducted on public datasets demonstrate that our method achieves superior rendering quality and tracking accuracy compared with state-of-the-art algorithms. The source code is available at: https://github.com/url-kaist/gaussianflow-slam.

cs.RO↗

arXiv2026

AIM-SLAM: Dense Monocular SLAM via Adaptive and Informative Multi-View Keyframe Prioritization with Foundation Model

Recent advances in geometric foundation models have emerged as a promising alternative for addressing the challenge of dense reconstruction in monocular visual simultaneous localization and mapping (SLAM). Although geometric foundation models enable SLAM to leverage variable input views, the previous methods remain confined to two-view pairs or fixed-length inputs without sufficient deliberation of geometric context for view selection. To tackle this problem, we propose AIM-SLAM, a dense monocular SLAM framework that exploits an adaptive and informative multi-view keyframe prioritization with dense pointmap predictions from visual geometry grounded transformer (VGGT). Specifically, we introduce the selective information- and geometric-aware multi-view adaptation (SIGMA) module, which employs voxel overlap and information gain to retrieve a candidate set of keyframes and adaptively determine its size. Furthermore, we formulate a joint multi-view Sim(3) optimization that enforces consistent alignment across selected views, substantially improving pose estimation accuracy. The effectiveness of AIM-SLAM is demonstrated on real-world datasets, where it achieves state-of-the-art pose estimation performance and accurate dense reconstruction results. Our system supports ROS integration, with code is available at https://aimslam.github.io/.

cs.RO↗

arXiv2026

VIRD: View-Invariant Representation through Dual-Axis Transformation for Cross-View Pose Estimation

Accurate global localization is critical for autonomous driving and robotics, but GNSS-based approaches often degrade due to occlusion and multipath effects. As an emerging alternative, cross-view pose estimation predicts the 3-DoF camera pose corresponding to a ground-view image with respect to a geo-referenced satellite image. However, existing methods struggle to bridge the significant viewpoint gap between the ground and satellite views mainly due to limited spatial correspondences. We propose a novel cross-view pose estimation method that constructs view-invariant representations through dual-axis transformation (VIRD). VIRD first applies a polar transformation to the satellite view to facilitate horizontal correspondence, then uses context-enhanced positional attention on the ground and polar-transformed satellite features to mitigate vertical misalignment, explicitly bridging the viewpoint gap. To further strengthen view invariance, we introduce a view-reconstruction loss that encourages the derived representations to reconstruct the original and cross-view images. Experiments on the KITTI and VIGOR datasets demonstrate that VIRD outperforms the state-of-the-art methods without orientation priors, reducing median position and orientation errors by 50.7% and 76.5% on KITTI, and 18.0% and 46.8% on VIGOR, respectively.

cs.CV↗

arXiv2026

DreamFlow: Local Navigation Beyond Observation via Conditional Flow Matching in the Latent Space

Local navigation in cluttered environments often suffers from dense obstacles and frequent local minima. Conventional local planners rely on heuristics and are prone to failure, while deep reinforcement learning(DRL)based approaches provide adaptability but are constrained by limited onboard sensing. These limitations lead to navigation failures because the robot cannot perceive structures outside its field of view. In this paper, we propose DreamFlow, a DRL-based local navigation framework that extends the robot's perceptual horizon through conditional flow matching(CFM). The proposed CFM based prediction module learns probabilistic mapping between local height map latent representation and broader spatial representation conditioned on navigation context. This enables the navigation policy to predict unobserved environmental features and proactively avoid potential local minima. Experimental results demonstrate that DreamFlow outperforms existing methods in terms of latent prediction accuracy and navigation performance in simulation. The proposed method was further validated in cluttered real world environments with a quadrupedal robot. The project page is available at https://dreamflow-icra.github.io.

cs.RO↗