arXiv subjects

Hui Zhou

Publications and source records attributed to Hui Zhou.

At least 37 records · Page 2Linked to original sources

arXiv2025

Semantic Communications for Vehicle-Based Mission-Critical Services: Challenges and Solutions

As mission-critical (MC) services such as Unmanned Aerial Vehicles (UAVs) based emergency communication and Internet of Vehicles (IoVs) enabled autonomous driving emerge, the traditional communication framework can not meet the growing demands for higher reliability and lower latency and the increasing transmission loads. Semantic Communication (SemCom), an emerging communication paradigm that shifts the focus from bit-level data to its context and intended task at the receiver (i.e., semantic level), is envisioned to be a key revolution in Sixth Generation (6G) networks. However, an explicit and systematic SemCom framework specifically tailored for Vehicle-based MC (VbMC) services has yet to be proposed, primarily due to the complexity and lack of analysis on their MC characteristics. In this article, we first present the key information-critical and infrastructure-critical vehicle-based services within the SemCom framework. We then analyze the unique characteristics of MC services and the corresponding challenges they present for SemCom. Building on this, we propose a novel SemCom framework designed to address the specific needs of MC services in vehicle systems, offering potential solutions to existing challenges. Finally, we present a case study on UAV-based rapid congestion relief, utilizing eXplainable AI (XAI) to validate the effectiveness of the proposed SemCom framework.

eess.SY↗

arXiv2025

VacuumVLA: Boosting VLA Capabilities via a Unified Suction and Gripping Tool for Complex Robotic Manipulation

Vision Language Action models have significantly advanced general purpose robotic manipulation by harnessing large scale pretrained vision and language representations. Among existing approaches, a majority of current VLA systems employ parallel two finger grippers as their default end effectors. However, such grippers face inherent limitations in handling certain real world tasks such as wiping glass surfaces or opening drawers without handles due to insufficient contact area or lack of adhesion. To overcome these challenges, we present a low cost, integrated hardware design that combines a mechanical two finger gripper with a vacuum suction unit, enabling dual mode manipulation within a single end effector. Our system supports flexible switching or synergistic use of both modalities, expanding the range of feasible tasks. We validate the efficiency and practicality of our design within two state of the art VLA frameworks: DexVLA and Pi0. Experimental results demonstrate that with the proposed hybrid end effector, robots can successfully perform multiple complex tasks that are infeasible for conventional two finger grippers alone. All hardware designs and controlling systems will be released.

cs.RO↗

arXiv2025

Boosting Adversarial Transferability via Ensemble Non-Attention

Ensemble attacks integrate the outputs of surrogate models with diverse architectures, which can be combined with various gradient-based attacks to improve adversarial transferability. However, previous work shows unsatisfactory attack performance when transferring across heterogeneous model architectures. The main reason is that the gradient update directions of heterogeneous surrogate models differ widely, making it hard to reduce the gradient variance of ensemble models while making the best of individual model. To tackle this challenge, we design a novel ensemble attack, NAMEA, which for the first time integrates the gradients from the non-attention areas of ensemble models into the iterative gradient optimization process. Our design is inspired by the observation that the attention areas of heterogeneous models vary sharply, thus the non-attention areas of ViTs are likely to be the focus of CNNs and vice versa. Therefore, we merge the gradients respectively from the attention and non-attention areas of ensemble models so as to fuse the transfer information of CNNs and ViTs. Specifically, we pioneer a new way of decoupling the gradients of non-attention areas from those of attention areas, while merging gradients by meta-learning. Empirical evaluations on ImageNet dataset indicate that NAMEA outperforms AdaEA and SMER, the state-of-the-art ensemble attacks by an average of 15.0% and 9.6%, respectively. This work is the first attempt to explore the power of ensemble non-attention in boosting cross-architecture transferability, providing new insights into launching ensemble attacks.

cs.CV↗

arXiv2025

Distributed Coordination for Heterogeneous Non-Terrestrial Networks

To achieve global coverage and ubiquitous connectivity, the non-terrestrial network (NTN) has been regarded as a key enabler in the sixth generation (6G) network, which includes uncrewed aerial vehicles (UAVs), high-altitude platforms (HAPs), and satellites. Since the unique characteristics of various NTN platforms strongly affect their implementation and lead to a highly dynamic and heterogeneous NTN scenario, achieving distributed coordination remains an important research direction. However, the explicit and systematic analysis of the individual layers' challenges and corresponding distributed coordination solutions in heterogeneous NTNs has not been proposed yet. Therefore, in this paper, we summarize the unique characteristics of each NTN platform, identify communication challenges within individual layers, and propose potential delay-tolerant or delay-sensitive coordinated solutions accordingly. We further analyse the feasibility of leveraging multi-agent deep reinforcement learning (MADRL) algorithms to achieve the proposed coordinated solutions. Finally, we present a case study of the joint scheduling and trajectory optimization problem in heterogeneous NTN, where a two-timescale multi-agent deep deterministic policy gradient (TTS-MADDPG) algorithm is developed to validate the effectiveness of distributed coordination.

eess.SY↗

arXiv2025

Two-Timescale Optimization Framework for IAB-Enabled Heterogeneous UAV Networks

In post-disaster scenarios, the rapid deployment of adequate communication infrastructure is essential to support disaster search, rescue, and recovery operations. To achieve this, uncrewed aerial vehicle (UAV) has emerged as a promising solution for emergency communication due to its low cost and deployment flexibility. However, conventional untethered UAV (U-UAV) is constrained by size, weight, and power (SWaP) limitations, making it incapable of maintaining the operation of a macro base station. To address this limitation, we propose a heterogeneous UAV-based framework that integrates tethered UAV (T-UAV) and U-UAVs, where U-UAVs are utilized to enhance the throughput of cell-edge ground user equipments (G-UEs) and guarantee seamless connectivity during G-UEs' mobility to safe zones. It is noted that the integrated access and backhaul (IAB) technique is adopted to support the wireless backhaul of U-UAVs. Accordingly, we formulate a two-timescale joint user scheduling and trajectory control optimization problem, aiming to maximize the downlink throughput under asymmetric traffic demands and G-UEs' mobility. To solve the formulated problem, we proposed a two-timescale multi-agent deep deterministic policy gradient (TTS-MADDPG) algorithm based on the centralized training and distributed execution paradigm. Numerical results show that the proposed algorithm outperforms other benchmarks, including the two-timescale multi-agent proximal policy optimization (TTS-MAPPO) algorithm and MADDPG scheduling method, with robust and higher throughput. Specifically, the proposed algorithm obtains up to 12.2\% average throughput gain compared to the MADDPG scheduling method.

eess.SY↗

arXiv2025

EmbodiedCoder: Parameterized Embodied Mobile Manipulation via Modern Coding Model

Recent advances in control robot methods, from end-to-end vision-language-action frameworks to modular systems with predefined primitives, have advanced robots' ability to follow natural language instructions. Nonetheless, many approaches still struggle to scale to diverse environments, as they often rely on large annotated datasets and offer limited interpretability.In this work, we introduce EmbodiedCoder, a training-free framework for open-world mobile robot manipulation that leverages coding models to directly generate executable robot trajectories. By grounding high-level instructions in code, EmbodiedCoder enables flexible object geometry parameterization and manipulation trajectory synthesis without additional data collection or fine-tuning.This coding-based paradigm provides a transparent and generalizable way to connect perception with manipulation. Experiments on real mobile robots show that EmbodiedCoder achieves robust performance across diverse long-term tasks and generalizes effectively to novel objects and environments.Our results demonstrate an interpretable approach for bridging high-level reasoning and low-level control, moving beyond fixed primitives toward versatile robot intelligence. See the project page at: https://embodiedcoder.github.io/EmbodiedCoder/

cs.RO↗

arXiv2025

Towards Reflected Object Detection: A Benchmark

Object detection has greatly improved over the past decade thanks to advances in deep learning and large-scale datasets. However, detecting objects reflected in surfaces remains an underexplored area. Reflective surfaces are ubiquitous in daily life, appearing in homes, offices, public spaces, and natural environments. Accurate detection and interpretation of reflected objects are essential for various applications. This paper addresses this gap by introducing a extensive benchmark specifically designed for Reflected Object Detection. Our Reflected Object Detection Dataset (RODD) features a diverse collection of images showcasing reflected objects in various contexts, providing standard annotations for both real and reflected objects. This distinguishes it from traditional object detection benchmarks. RODD encompasses 10 categories and includes 21,059 images of real and reflected objects across different backgrounds, complete with standard bounding box annotations and the classification of objects as real or reflected. Additionally, we present baseline results by adapting five state-of-the-art object detection models to address this challenging task. Experimental results underscore the limitations of existing methods when applied to reflected object detection, highlighting the need for specialized approaches. By releasing RODD, we aim to support and advance future research on detecting reflected objects. Dataset and code are available at: https://github.com/jirouvan/ROD.

cs.CV↗

arXiv2025

Exposing the Copycat Problem of Imitation-based Planner: A Novel Closed-Loop Simulator, Causal Benchmark and Joint IL-RL Baseline

Machine learning (ML)-based planners have recently gained significant attention. They offer advantages over traditional optimization-based planning algorithms. These advantages include fewer manually selected parameters and faster development. Within ML-based planning, imitation learning (IL) is a common algorithm. It primarily learns driving policies directly from supervised trajectory data. While IL has demonstrated strong performance on many open-loop benchmarks, it remains challenging to determine if the learned policy truly understands fundamental driving principles, rather than simply extrapolating from the ego-vehicle's initial state. Several studies have identified this limitation and proposed algorithms to address it. However, these methods often use original datasets for evaluation. In these datasets, future trajectories are heavily dependent on initial conditions. Furthermore, IL often overfits to the most common scenarios. It struggles to generalize to rare or unseen situations. To address these challenges, this work proposes: 1) a novel closed-loop simulator supporting both imitation and reinforcement learning, 2) a causal benchmark derived from the Waymo Open Dataset to rigorously assess the impact of the copycat problem, and 3) a novel framework integrating imitation learning and reinforcement learning to overcome the limitations of purely imitative approaches. The code for this work will be released soon.

cs.CV↗

arXiv2025

Homogeneous linear recurrence relations of the determinants of distance matrices of trees

In 1971, by induction on $n$ and using a two-term linear recurrence relation, Graham and Pollak got a beautiful formula $$\det(D_n)=-(n-1)(-2)^{n-2}$$ on the determinant of distance matrix $D_n$ of a tree $T_n$ on $n$ vertices. The recurrence relations are very crucial when proving this formula by inductive method: in 2006, Yan and Yeh used two-term and three-term recurrence relations; in 2020, Du and Yeh used a homogeneous linear three-term recurrence relation. In this paper, we analyze the subtree structure of the tree and find four-term, five-term, six-term and seven-term homogeneous linear recurrence relations on $\det(D_n)$, as a corollary new proofs of Graham and Pollak's formula can be given.

math.CO↗

arXiv2025

A General Sensing-assisted Channel Estimation Framework in Distributed MIMO Network

In 6G communications, it is envisioned to equip the traditional access point (AP) with sensing capability to fully benefit the existing wireless communication infrastructures. Thus, sensing-assisted communication has attracted significant attention from both industry and academia. However, most existing works focused on sensing-assisted communication in line-of-sight (LoS) scenarios due to sensing limitations, where the sensing target (ST) and communication user equipment (UE) remain the same. In this paper, we propose a general sensing-assisted channel estimation framework in the distributed multiple-input and multiple-output (DMIMO) network and consider a scenario where the ST and UE are different entities. In addition, ST is a moving target (e.g. a robot) which causes channels between APs and UEs to vary due to changes in the reflection paths of the indoor environment. Therefore, we let multiple APs to jointly sense the position of the ST, which will be incorporated in a Ray tracing model to obtain a more accurate estimate of the channels from APs to UEs for both the LoS and non-line-of-sight (NLoS) scenarios. Simulation results demonstrate that our proposed sensing-assisted communication framework achieves a much higher channel estimation accuracy and downlink throughput compared to the traditional least-square (LS) channel estimation. More importantly, the feasibility of the proposed framework has been validated to guarantee the stringent channel estimation accuracy requirement in the DMIMO network.

eess.SP↗

arXiv2025

Variational Quantum Metrology with Loschmidt Echo

By utilizing quantum mechanical effects, such as superposition and entanglement, quantum metrology promises higher precision than the classical strategies. It is, however, practically challenging to realize the quantum advantages. This is mainly due to the difficulties in engineering non-classical probe state and performing nontrivial measurement in practise, particularly with a large number of particles. Here we propose a scalable scheme with a symmetrical variational quantum circuit which, same as the Loschmidt echo, consists of a forward and a backward evolution. We show that in this scheme the quantum Fisher information, which quantifies the precision limit, can be efficiently obtained from a measurement signal of the Loschmidt echo. We experimentally implement the scheme on an ensemble of 10-spin quantum processor and successfully achieves a precision near the theoretical limit which outperforms the standard quantum limit with 12.4 dB. The scheme can be efficiently implemented on various noisy intermediate-scale quantum devices which provides a promising routine to demonstrate quantum advantages.

quant-ph↗

arXiv2025

Flat bands and temperature-driven phase transition in quasi-one-dimensional zigzag chains

Flat-band materials have garnered extensive attention due to their captivating properties associated with strong correlation effects. While flat bands have been discovered in several types of 2D materials, their existence in 1D systems remains elusive. Here, we propose a 1D frustrated lattice, specifically the 1D zigzag lattice, as a platform for hosting flat bands. This lattice can be experimentally realized by growing CuTe chains on Cu(111). The presence of flat bands was confirmed by tight-binding model analysis, first-principles calculations, and angle-resolved photoemission spectroscopy measurements. In addition, we discovered a temperature-driven phase transition at approximately 250 K. Detailed analyses demonstrate that the system has a Tomonaga-Luttinger liquid behavior, accompanied by spin-charge separation effects. Our work unveils new prospects for investigating strongly correlated electron behaviors and topological properties in the 1D limit.

cond-mat.str-el↗

arXiv2025

ZCCL: Significantly Improving Collective Communication With Error-Bounded Lossy Compression

With the ever-increasing computing power of supercomputers and the growing scale of scientific applications, the efficiency of MPI collective communication turns out to be a critical bottleneck in large-scale distributed and parallel processing. The large message size in MPI collectives is particularly concerning because it can significantly degrade overall parallel performance. To address this issue, prior research simply applies off-the-shelf fixed-rate lossy compressors in the MPI collectives, leading to suboptimal performance, limited generalizability, and unbounded errors. In this paper, we propose a novel solution, called ZCCL, which leverages error-bounded lossy compression to significantly reduce the message size, resulting in a substantial reduction in communication costs. The key contributions are three-fold. (1) We develop two general, optimized lossy-compression-based frameworks for both types of MPI collectives (collective data movement as well as collective computation), based on their particular characteristics. Our framework not only reduces communication costs but also preserves data accuracy. (2) We customize fZ-light, an ultra-fast error-bounded lossy compressor, to meet the specific needs of collective communication. (3) We integrate ZCCL into multiple collectives, such as Allgather, Allreduce, Scatter, and Broadcast, and perform a comprehensive evaluation based on real-world scientific application datasets. Experiments show that our solution outperforms the original MPI collectives as well as multiple baselines by 1.9--8.9X.

cs.DC↗

arXiv2025

Oriented diameter of the complete tripartite graph (III)

Given a bridgeless graph $G$, let $\mathbb{D}(G)$ be the set of all strong orientations of $G$, and define the oriented diameter $f(G)$ of $G$ to be the minimum of diameters $diam(D)$ among all the strong orientations $D\in \mathbb{D}(G)$, i.e., $f(G)=\min\{diam(D)\mid D\in \mathbb{D}(G)\}$. In this paper, we determine the oriented diameter of complete tripartite graph $K(3,p,q)$ for $p\geqslant 5$. Combining with the previous results, the oriented diameter of complete tripartite graph $K(3,p,q)$ are known.

math.CO↗

arXiv2025

Oriented diameter of the complete tripartite graph (II)

For a graph $G$, let $\mathbb{D}(G)$ denote the set of all strong orientations of $G$, and the oriented diameter of $G$ is $f(G)=\min \{diam(D) \mid D \in \mathbb{D}(G)\}$, which is the minimum value of the diameters $diam(D)$ where $D \in \mathbb{D}(G)$. In this paper, we determine the oriented diameter of complete tripartite graphs $K(3,3, q)$ and $K(3,4, q)$, these are special cases that arise in determining the oriented diameter of $K(3, p, q)$.

math.CO↗

arXiv2025

Breaking Through the Spike: Spike Window Decoding for Accelerated and Precise Automatic Speech Recognition

Recently, end-to-end automatic speech recognition has become the mainstream approach in both industry and academia. To optimize system performance in specific scenarios, the Weighted Finite-State Transducer (WFST) is extensively used to integrate acoustic and language models, leveraging its capacity to implicitly fuse language models within static graphs, thereby ensuring robust recognition while also facilitating rapid error correction. However, WFST necessitates a frame-by-frame search of CTC posterior probabilities through autoregression, which significantly hampers inference speed. In this work, we thoroughly investigate the spike property of CTC outputs and further propose the conjecture that adjacent frames to non-blank spikes carry semantic information beneficial to the model. Building on this, we propose the Spike Window Decoding algorithm, which greatly improves the inference speed by making the number of frames decoded in WFST linearly related to the number of spiking frames in the CTC output, while guaranteeing the recognition performance. Our method achieves SOTA recognition accuracy with significantly accelerates decoding speed, proven across both AISHELL-1 and large-scale In-House datasets, establishing a pioneering approach for integrating CTC output with WFST.

eess.AS↗

arXiv2024

Global convergence for time-periodic systems with negative feedback and applications

For the discrete-time dynamical system generated by the Poincare map T of a time-periodic closed-loop negative feedback system, we present an amenable condition which enables us to obtain the global convergence of the orbits. This yields the global convergence to the harmonic periodic solutions of the corresponding time-periodic systems with negative feedback. Our approach is motivated by embedding the negative feedback system into a larger time-periodic monotone dynamical systems. We further utilize the theoretical results to obtain the global convergence to periodic solutions for the time periodically-forced gene regulatory models. Numerical simulations are exhibited to illustrate the feasibility of our theoretical results for this model.

math.DS↗

arXiv2024

Deploying Multi-task Online Server with Large Language Model

In the industry, numerous tasks are deployed online. Traditional approaches often tackle each task separately by its own network, which leads to excessive costs for developing and scaling models, especially in the context of large language models. Although multi-task methods can save costs through parameter sharing, they often struggle to outperform single-task methods in real-world applications. To tackle these challenges, we present a three-stage multi-task learning framework for large language models. It involves task filtering, followed by fine-tuning on high-resource tasks, and finally fine-tuning on all tasks. We conducted comprehensive experiments in single-task and multi-task settings. Our approach, exemplified on different benchmarks, demonstrates that it is able to achieve performance comparable to the single-task method while reducing up to 90.9\% of its overhead.

cs.CL↗