arXiv subjects

Hui Yang

Publications and source records attributed to Hui Yang.

At least 73 records · Page 4Linked to original sources

arXiv2025

Magnetism and superconductivity in bilayer nickelate

The discovery of high-temperature superconductivity in bilayer nickelate La$_{3}$Ni$_{2}$O$_{7}$ necessitates a minimal theoretical model that unifies the superconducting phase with the spin-density-wave (SDW) phase without external pressure or strain. We propose a model where half-filled $d_{z^{2}}$ local moments interact with itinerant $d_{x^{2}-y^{2}}$ electrons via strong Hund's coupling $J_H$, which reduces to a bilayer type-II t-J model in the large $J_H$ limit. Using iDMRG calculations on an $L_y=4, L_z=2$ cylinder, we demonstrate that the competition between double-exchange ferromagnetism and in-plane superexchange generates period-4 stripe-like SDW order-a feature absent in one-orbital t-J model with only $d_{x^2-y^2}$ orbital. Furthermore, increasing the interlayer exchange coupling suppresses magnetic order and stabilizes interlayer s-wave superconductivity. These results identify the type-II t-J model as a minimal framework for capturing the interplay of magnetism and superconductivity in bilayer nickelates.

cond-mat.str-el↗

arXiv2025

The nature of UHE source 1LHAASO J1740+0948u and its connection to PSR J1740+1000

We present multi-wavelength analysis of 1LHAASO J1740+0948u and its surroundings including the pulsar wind nebula of middle-aged pulsar PSR J1740+1000. Although a dozen X-ray sources are found within the UHE emission site, careful analysis shows that they are unlikely to produce the observed UHE emission. The most likely particle accelerator is pulsar J1740+1000 which if offset by 13' north of the UHE source but appears to be connected to it by an extended feature seen in X-rays. For a plausible pulsar distance of 1.2 kpc, 1LHAASO J1740+0948u must be located about 5 pc away which requires rapid transport of electrons along the feature to avoid radiative losses. This poses several challenges for standard pulsar theory. Firstly, being produced $\lesssim$ 10 kyrs ago, particles must have been accelerated to the energy corresponding to a large fraction of the pulsar's full potential drop across the polar cap. Secondly, due to the lack of TeV emission extension toward the pulsar, particles must be accumulating in the UHE region. In this context, we discuss two possible scenarios: a tail filled with pulsar wind and confined by the bow-shock due to the fast pulsar's motion and an ISM filament filled by the most energetic pulsar wind particles escaping from the apex of the bow-shock.

astro-ph.HE↗

arXiv2025

Unbiased Platform-Level Causal Estimation for Search Systems: A Competitive Isolation PSM-DID Framework

Evaluating platform-level interventions in search-based two-sided marketplaces is fundamentally challenged by systemic effects such as spillovers and network interference. While widely used for causal inference, the PSM (Propensity Score Matching) - DID (Difference-in-Differences) framework remains susceptible to selection bias and cross-unit interference from unaccounted spillovers. In this paper, we introduced Competitive Isolation PSM-DID, a novel causal framework that integrates propensity score matching with competitive isolation to enable platform-level effect measurement (e.g., order volume, GMV) instead of item-level metrics in search systems. Our approach provides theoretically guaranteed unbiased estimation under mutual exclusion conditions, with an open dataset released to support reproducible research on marketplace interference (github.com/xxxx). Extensive experiments demonstrate significant reductions in interference effects and estimation variance compared to baseline methods. Successful deployment in a large-scale marketplace confirms the framework's practical utility for platform-level causal inference.

cs.AI↗

arXiv2025

Towards Smart Manufacturing Metaverse via Digital Twinning in Extended Reality

The rapid evolution of modern manufacturing systems is driven by the integration of emerging metaverse technologies such as artificial intelligence (AI), digital twin (DT) with different forms of extended reality (XR) like virtual reality (VR), augmented reality (AR), and mixed reality (MR). These advances confront manufacturing workers with complex and evolving environments that demand digital literacy for problem solving in the future workplace. However, manufacturing industry faces a critical shortage of skilled workforce with digital literacy in the world. Further, global pandemic has significantly changed how people work and collaborate digitally and remotely. There is an urgent need to rethink digital platformization and leverage emerging technologies to propel industrial evolution toward human-centered manufacturing metaverse (MfgVerse). This paper presents a forward-looking perspective on the development of smart MfgVerse, highlighting current efforts in learning factory, cognitive digital twinning, and the new sharing economy of manufacturing-as-a-service (MaaS). MfgVerse is converging into multiplex networks, including a social network of human stakeholders, an interconnected network of manufacturing things or agents (e.g., machines, robots, facilities, material handling systems), a network of digital twins of physical things, as well as auxiliary networks of sales, supply chain, logistics, and remanufacturing systems. We also showcase the design and development of a learning factory for workforce training in extended reality. Finally, future directions, challenges, and opportunities are discussed for human-centered manufacturing metaverse. We hope this work helps stimulate more comprehensive studies and in-depth research efforts to advance MfgVerse technologies.

eess.SY↗

arXiv2025

RiskPO: Risk-based Policy Optimization via Verifiable Reward for LLM Post-Training

Reinforcement learning with verifiable reward has recently emerged as a central paradigm for post-training large language models (LLMs); however, prevailing mean-based methods, such as Group Relative Policy Optimization (GRPO), suffer from entropy collapse and limited reasoning gains. We argue that these issues stem from overemphasizing high-probability output sequences while neglecting rare but informative reasoning paths. To address these challenges, we propose Risk-based Policy Optimization (RiskPO), which substitutes classical mean-based objectives with principled risk measures. Specifically, we introduce a Mixed Value-at-Risk objective that integrates weighted attention over multiple regions of the reward distribution, thereby amplifying gradient signals on challenging instances and preventing overconfident convergence. We further design a bundling scheme that aggregates multiple questions into bundles, thus enriching the feedback signal and yielding more stable and informative training dynamics. Theoretically, we prove that the risk-averse update alleviates entropy collapse and promotes exploration. Numerically, RiskPO achieves consistent and significant improvements in mathematical reasoning, multi-modal reasoning, and code generation benchmarks, surpassing GRPO and its variants on both Pass@1 and Pass@k metrics. Our results demonstrate that risk-based optimization provides a rigorous and effective paradigm for enhancing LLM reasoning capabilities.

cs.LG↗

arXiv2025

Doping a spin-one Mott insulator: possible application to bilayer nickelate

In this article, we review some recent theoretical developments on potential high-temperature superconductors and unconventional metallic states that can arise from doping a spin-one Mott insulator in the $d^{8}$ valence. These studies are particularly relevant-though not limited-to the recently discovered bilayer nickelate superconductor La$_3$Ni$_2$O$_7$. We focus on a ferromagnetic (FM) Kondo lattice model with mobile electrons in the $d_{x^2-y^2}$ orbital coupled to the localized spin moments in $d_{z^2}$ orbital through a large Hund's coupling $J_H$. In the large $J_H$ limit, the model reduces to the type II t-J model with a mixture of spin-half singlon states and spin-one doublon states. We summarize DMRG results on the Luther-Emery liquid in one dimensional chain and two-leg ladder. Then we mainly focus on bilayer square lattice and show that a large inter-layer coupling $J_\perp$ of $d_{z^2}$ orbital can induce strong inter-layer pairing of $d_{x^2-y^2}$ orbital. In the strong $J_\perp$ limit, a kinetic-energy driven high $T_c$ superconductivity is demonstrated in an ideal model with only a single hopping term. Furthermore, the model predicts a symmetric pseudogap metal-dubbed `second Fermi liquid"-in the underdoped regime, yielding a phase diagram analogous to that of hole-doped cuprates. The bilayer Kondo model therefore, presents a promising platform for both realizing higher-Tc superconductors and exploring non-Fermi liquid physics. We also comment on the possible limitations of the current models for the bilayer nickelate material and point out some future directions.

cond-mat.str-el↗

arXiv2025

Language Models as Ontology Encoders

OWL (Web Ontology Language) ontologies which are able to formally represent complex knowledge and support semantic reasoning have been widely adopted across various domains such as healthcare and bioinformatics. Recently, ontology embeddings have gained wide attention due to its potential to infer plausible new knowledge and approximate complex reasoning. However, existing methods face notable limitations: geometric model-based embeddings typically overlook valuable textual information, resulting in suboptimal performance, while the approaches that incorporate text, which are often based on language models, fail to preserve the logical structure. In this work, we propose a new ontology embedding method OnT, which tunes a Pretrained Language Model (PLM) via geometric modeling in a hyperbolic space for effectively incorporating textual labels and simultaneously preserving class hierarchies and other logical relationships of Description Logic EL. Extensive experiments on four real-world ontologies show that OnT consistently outperforms the baselines including the state-of-the-art across both tasks of prediction and inference of axioms. OnT also demonstrates strong potential in real-world applications, indicated by its robust transfer learning abilities and effectiveness in real cases of constructing a new ontology from SNOMED CT. Data and code are available at https://github.com/HuiYang1997/OnT.

cs.AI↗

arXiv2025

xbench: Tracking Agents Productivity Scaling with Profession-Aligned Real-World Evaluations

We introduce xbench, a dynamic, profession-aligned evaluation suite designed to bridge the gap between AI agent capabilities and real-world productivity. While existing benchmarks often focus on isolated technical skills, they may not accurately reflect the economic value agents deliver in professional settings. To address this, xbench targets commercially significant domains with evaluation tasks defined by industry professionals. Our framework creates metrics that strongly correlate with productivity value, enables prediction of Technology-Market Fit (TMF), and facilitates tracking of product capabilities over time. As our initial implementations, we present two benchmarks: Recruitment and Marketing. For Recruitment, we collect 50 tasks from real-world headhunting business scenarios to evaluate agents' abilities in company mapping, information retrieval, and talent sourcing. For Marketing, we assess agents' ability to match influencers with advertiser needs, evaluating their performance across 50 advertiser requirements using a curated pool of 836 candidate influencers. We present initial evaluation results for leading contemporary agents, establishing a baseline for these professional domains. Our continuously updated evalsets and evaluations are available at https://xbench.org.

cs.LG↗

arXiv2025

High-temperature superconductivity from kinetic energy

Superconductivity is usually assumed to arise from attractive interaction. In this work we show that strong pairing is possible soley from kinetic energy even without a net attraction. We demonstrate a high-temperature kinetic superconductor in a simple lattice model with nearest-neighbor hopping ($t$) projected onto a constrained Hilbert space, analogous to the $t$-$J$ model with $J=0$, where kinetic magnetism has been previously studied. Using density matrix renormalization group (DMRG) on cylinders up to width $L_y=8$, we find a superconducting ground state exhibiting a key difference from high-$T_c$ cuprates: both the pairing gap and phase stiffness \textit{increase} with doping ($x$). We find pairing gaps, determined from spin and single-electron charge gaps, exceeding $1.5t$. This model can be realized within the double Kondo lattice model, relevant to bilayer nickelates, in the limit of strong inter-layer spin coupling ($J_\perp/t \rightarrow +\infty$) and a balancing inter-layer repulsion ($V$). Importantly, the double Kondo model does not fundamentally restrict $J_\perp/t$, suggesting the potential for high critical temperatures ($T_c$) approaching $0.5t$. While this idealized limit predicts large pairing gaps, we show a smooth connection to the more realistic regime with $J_\perp \sim t$, albeit with a reduced pairing gap of approximately $0.1t$. Assuming $t \sim 10^3$ K in typical solid state systems, our model suggests the exciting possibility of achieving $T_c$ of hundreds of Kelvin. We propose searching for bilayer materials with reduced out-of-plane lattice constants to better approximate the conditions of our ideal model.

cond-mat.str-el↗

arXiv2025

Enhanced nonlinear Hall effect by Cooper pairs near superconductor criticality

Unlike the linear Hall effect that requires broken time-reversal symmetry, the nonlinear Hall effect may occur in time-reversal symmetric systems as long as there exists a non-zero Berry curvature dipole in the absence of inversion symmetry. Interestingly, the presence of time-reversal symmetry is consistent with and thus allows a direct transition into a superconducting phase. Indeed, superconductivity has been established in various nonlinear Hall materials, such as WTe$_2$ and MoTe$_2$, at sufficiently low temperatures. We find that the nonlinear Hall response should be significantly enhanced near the superconducting criticality, dominated by the Aslamazov-Larkin (AL) contributions augmented by superconducting fluctuations, which we attribute to the Berry curvature dipole and a divergent lifetime $τ\sim (T-T_c)^{-1}$ of the Cooper pairs, instead of the single electrons. Such a controlled enhancement brings the nonlinear Hall effect into various simple experimental observations and practical applicational potentials.

cond-mat.mes-hall↗

arXiv2025

MonoDiff9D: Monocular Category-Level 9D Object Pose Estimation via Diffusion Model

Object pose estimation is a core means for robots to understand and interact with their environment. For this task, monocular category-level methods are attractive as they require only a single RGB camera. However, current methods rely on shape priors or CAD models of the intra-class known objects. We propose a diffusion-based monocular category-level 9D object pose generation method, MonoDiff9D. Our motivation is to leverage the probabilistic nature of diffusion models to alleviate the need for shape priors, CAD models, or depth sensors for intra-class unknown object pose estimation. We first estimate coarse depth via DINOv2 from the monocular image in a zero-shot manner and convert it into a point cloud. We then fuse the global features of the point cloud with the input image and use the fused features along with the encoded time step to condition MonoDiff9D. Finally, we design a transformer-based denoiser to recover the object pose from Gaussian noise. Extensive experiments on two popular benchmark datasets show that MonoDiff9D achieves state-of-the-art monocular category-level 9D object pose estimation accuracy without the need for shape priors or CAD models at any stage. Our code will be made public at https://github.com/CNJianLiu/MonoDiff9D.

cs.CV↗

arXiv2025

Power Spectra of Velocity Fluctuations in Granular Heap Flow

This study used Speckle Visibility Spectroscopy to examine velocity fluctuations in a three-dimensional granular heap flow, where the mean velocity profile consists of a fast-flow surface layer and a creep layer beneath. The velocity spectra follow power-law scalings, $E(f) \propto f^α$, with $α\approx -0.85$ in the surface flow layer -- matching the Self-Organized Criticality (SOC) model with open boundaries ($α\approx -0.95$). In the creep layer, $α$ decreases with depth, reaching $α\approx -1.5$ at approximately 55 mean particle diameters, consistent with the SOC model with closed boundaries ($α\approx -1.58$). Analysis of the fluctuation velocity distributions offers additional insights into the microscopic origins of the spectrum's characteristics. These findings help resolve the long-standing puzzle of flow localization in gravity-driven granular flows despite a constant shear stress-to-pressure ratio throughout the material.

cond-mat.soft↗

arXiv2025

On isolated singularities of the conformal Gaussian curvature equation and $Q$-curvature equation

In this paper, we study the isolated singularities of the conformal Gaussian curvature equation \[ -Δu = K(x) e^{u} \quad ~ in ~ B_{1} \setminus \{ 0 \}, \] where $B_1 \setminus \{ 0 \} \subset \mathbb{R}^2$ is the punctured unit disc. Under the assumption that the Gaussian curvature $K \in L^\infty(B_1)$ is nonnegative, we establish the asymptotic behavior of solutions near the singularity. When $K \equiv 1$, a similar result has been obtained by Chou and Wan (Pacific J. Math. 1994) using the method of complex analysis. Our proof is entirely based on the PDE method and applies to the general Gaussian curvature $K(x)$. Furthermore, our approach is also available for characterizing isolated singularities of the conformal $Q$-curvature equation $(-Δ)^{\frac{n}{2}} u = K(x) e^{u}$ in any dimension $n\geq 3$. This equation arises from the prescribing $Q$-curvature problem.

math.AP↗

arXiv2025

TransBox: EL++-closed Ontology Embedding

OWL (Web Ontology Language) ontologies, which are able to represent both relational and type facts as standard knowledge graphs and complex domain knowledge in Description Logic (DL) axioms, are widely adopted in domains such as healthcare and bioinformatics. Inspired by the success of knowledge graph embeddings, embedding OWL ontologies has gained significant attention in recent years. Current methods primarily focus on learning embeddings for atomic concepts and roles, enabling the evaluation based on normalized axioms through specially designed score functions. However, they often neglect the embedding of complex concepts, making it difficult to infer with more intricate axioms. This limitation reduces their effectiveness in advanced reasoning tasks, such as Ontology Learning and ontology-mediated Query Answering. In this paper, we propose EL++-closed ontology embeddings which are able to represent any logical expressions in DL via composition. Furthermore, we develop TransBox, an effective EL++-closed ontology embedding method that can handle many-to-one, one-to-many and many-to-many relations. Our extensive experiments demonstrate that TransBox often achieves state-of-the-art performance across various real-world datasets for predicting complex axioms.

cs.AI↗

arXiv2025

Diff9D: Diffusion-Based Domain-Generalized Category-Level 9-DoF Object Pose Estimation

Nine-degrees-of-freedom (9-DoF) object pose and size estimation is crucial for enabling augmented reality and robotic manipulation. Category-level methods have received extensive research attention due to their potential for generalization to intra-class unknown objects. However, these methods require manual collection and labeling of large-scale real-world training data. To address this problem, we introduce a diffusion-based paradigm for domain-generalized category-level 9-DoF object pose estimation. Our motivation is to leverage the latent generalization ability of the diffusion model to address the domain generalization challenge in object pose estimation. This entails training the model exclusively on rendered synthetic data to achieve generalization to real-world scenes. We propose an effective diffusion model to redefine 9-DoF object pose estimation from a generative perspective. Our model does not require any 3D shape priors during training or inference. By employing the Denoising Diffusion Implicit Model, we demonstrate that the reverse diffusion process can be executed in as few as 3 steps, achieving near real-time performance. Finally, we design a robotic grasping system comprising both hardware and software components. Through comprehensive experiments on two benchmark datasets and the real-world robotic system, we show that our method achieves state-of-the-art domain generalization performance. Our code will be made public at https://github.com/CNJianLiu/Diff9D.

cs.CV↗

arXiv2025

An Efficient Diffusion-based Non-Autoregressive Solver for Traveling Salesman Problem

Recent advances in neural models have shown considerable promise in solving Traveling Salesman Problems (TSPs) without relying on much hand-crafted engineering. However, while non-autoregressive (NAR) approaches benefit from faster inference through parallelism, they typically deliver solutions of inferior quality compared to autoregressive ones. To enhance the solution quality while maintaining fast inference, we propose DEITSP, a diffusion model with efficient iterations tailored for TSP that operates in a NAR manner. Firstly, we introduce a one-step diffusion model that integrates the controlled discrete noise addition process with self-consistency enhancement, enabling optimal solution prediction through simultaneous denoising of multiple solutions. Secondly, we design a dual-modality graph transformer to bolster the extraction and fusion of features from node and edge modalities, while further accelerating the inference with fewer layers. Thirdly, we develop an efficient iterative strategy that alternates between adding and removing noise to improve exploration compared to previous diffusion methods. Additionally, we devise a scheduling framework to progressively refine the solution space by adjusting noise levels, facilitating a smooth search for optimal solutions. Extensive experiments on real-world and large-scale TSP instances demonstrate that DEITSP performs favorably against existing neural approaches in terms of solution quality, inference latency, and generalization ability. Our code is available at $\href{https://github.com/DEITSP/DEITSP}{https://github.com/DEITSP/DEITSP}$.

cs.LG↗

arXiv2025

On the Converse of Prékopa's Theorem and Berndtsson's Theorem

Given a continuous function $ϕ$ defined on a domain $Ω\subset\mathbb{R}^m\times\mathbb{R}^n$, we show that if a Prékopa-type result holds for $ϕ+ψ$ for any non-negative convex function $ψ$ on $Ω$, then $ϕ$ must be a convex function. Additionally, if the projection of $Ω$ onto $\mathbb{R}^m$ is convex, then $\overlineΩ$ is also convex. This provides a converse of Prékopa's theorem from convex analysis. We also establish analogous results for Berndtsson's theorem on the plurisubharmonic variation of Bergman kernels, showing that the plurisubharmonicity of weight functions and the pseudoconvexity of domains are necessary conditions in some sense.

math.CV↗

arXiv2024

StableMoFusion: Towards Robust and Efficient Diffusion-based Motion Generation Framework

Thanks to the powerful generative capacity of diffusion models, recent years have witnessed rapid progress in human motion generation. Existing diffusion-based methods employ disparate network architectures and training strategies. The effect of the design of each component is still unclear. In addition, the iterative denoising process consumes considerable computational overhead, which is prohibitive for real-time scenarios such as virtual characters and humanoid robots. For this reason, we first conduct a comprehensive investigation into network architectures, training strategies, and inference processs. Based on the profound analysis, we tailor each component for efficient high-quality human motion generation. Despite the promising performance, the tailored model still suffers from foot skating which is an ubiquitous issue in diffusion-based solutions. To eliminate footskate, we identify foot-ground contact and correct foot motions along the denoising process. By organically combining these well-designed components together, we present StableMoFusion, a robust and efficient framework for human motion generation. Extensive experimental results show that our StableMoFusion performs favorably against current state-of-the-art methods. Project page: https://h-y1heng.github.io/StableMoFusion-page/

cs.CV↗