arXiv subjects

Hui Li

Publications and source records attributed to Hui Li.

At least 703 records · Page 39Linked to original sources

arXiv2019

On the Dust Signatures Induced by Eccentric Super-Earths in Protoplanetary Disks

We investigate the impact of a highly eccentric 10 $M_{\rm \oplus}$ (where $M_{\rm \oplus}$ is the Earth mass) planet embedded in a dusty protoplanetary disk on the dust dynamics and its observational implications. By carrying out high-resolution 2D gas and dust two-fluid hydrodynamical simulations, we find that the planet's orbit can be circularized at large radii. After the planet's orbit is circularized, partial gap opening and dust ring formation happen close to the planet's circularization radius, which can explain the observed gaps/rings at the outer region of disks. When the disk mass and viscosity become low, we find that an eccentric planet can even open gaps and produce dust rings close to the pericenter and apocenter radii before its circularization. This offers alternative scenarios for explaining the observed dust rings and gaps in protoplanetary disks. A lower disk viscosity is favored to produce brighter rings in observations. An eccentric planet can also potentially slow down the dust radial drift in the outer region of the disk when the disk viscosity is low ($α\lesssim2\times10^{-4}$) and the circularization is faster than the dust radial drift.

astro-ph.EP↗

arXiv2019

Rotation Measure synthesis applied on synthetic SKA images of galaxy clusters

Future observations with next generation radio telescopes will help us to understand the presence and the evolution of magnetic fields in galaxy clusters through the determination of the so-called Rotation Measure (RM). In this work, we applied the RM-synthesis technique on synthetic SKA1-MID radio images of a pair of merging galaxy clusters, measured between 950 and 1750 MHz with a resolution of 10 arcsec and a thermal noise of 0.1$μ$Jy/beam. The results of our RM-synthesis analysis are compared to the simulations' input parameters. We study two cases: one with radio haloes at the cluster centres, and another without. We found that the information obtained with the RM-synthesis is in general agreement with the input information. Some discrepancies are however present. We characterise them in this work, with the final goal of determining the potential impact of SKA1-MID on the study of cluster magnetic fields.

astro-ph.CO↗

arXiv2019

Heating of Heavy Ions in Low-beta Compressible Turbulence

Enhancement of minor ions such as $^3$He and heavy ions in flare-associated solar energetic particle (SEP) events remains one of the major puzzles in heliophysics. In this work, we use 3D hybrid simulations (kinetic protons and fluid electrons) to investigate particle energization in a turbulent low-beta environment similar to solar flares. It is shown that in this regime the injected large-amplitude Alfvén waves develop into compressible and anisotropic turbulence, which efficiently heats thermal ions of different species. We find that temperature increase of heavy ions is inversely proportional to the charge to mass ratio, which is consistent with observations of impulsive SEP events. Further analysis reveals that ions are energized by interacting with nearly perpendicular magnetosonic waves near proton inertial scale.

physics.space-ph↗

arXiv2019

Including Dust Coagulation in Hydrodynamic Models of Protoplanetary Disks: Dust Evolution in the Vicinity of a Jupiter-mass Planet

Dust growth is often neglected when building models of protoplanetary disks due to its complexity and computational expense. However, it does play a major role in shaping the evolution of protoplanetary dust and planet formation. In this paper, we present a numerical model coupling 2-D hydrodynamic evolution of a protoplanetary disk, including a Jupiter-mass planet, and dust coagulation. This is obtained by including multiple dust fluids in a single grid-based hydrodynamic simulation and solving the Smoluchowski equation for dust coagulation on top of solving for the hydrodynamic evolution. We find that fragmentation of dust aggregates trapped in a pressure bump outside of the planetary gap leads to an enhancement in density of small grains. We compare the results obtained from the full coagulation treatment to the commonly used, fixed dust size approach and to previously applied, less computationally intensive methods for including dust coagulation. We find that the full coagulation results cannot be reproduced using the fixed-size treatment, but some can be mimicked using a relatively simple method for estimating the characteristic dust size in every grid cell.

astro-ph.EP↗

arXiv2019

Infrared and Visible Image Fusion with ResNet and zero-phase component analysis

Feature extraction and processing tasks play a key role in Image Fusion, and the fusion performance is directly affected by the different features and processing methods undertaken. By contrast, most of deep learning-based methods use deep features directly without feature extraction or processing. This leads to the fusion performance degradation in some cases. To solve these drawbacks, we propose a deep features and zero-phase component analysis (ZCA) based novel fusion framework is this paper. Firstly, the residual network (ResNet) is used to extract deep features from source images. Then ZCA is utilized to normalize the deep features and obtain initial weight maps. The final weight maps are obtained by employing a soft-max operation in association with the initial weight maps. Finally, the fused image is reconstructed using a weighted-averaging strategy. Compared with the existing fusion methods, experimental results demonstrate that the proposed framework achieves better performance in both objective assessment and visual quality. The code of our fusion algorithm is available at https://github.com/hli1221/imagefusion_resnet50

cs.CV↗

arXiv2019

Single-shot 3D shape reconstruction using deep convolutional neural networks

A robust single-shot 3D shape reconstruction technique integrating the fringe projection profilometry (FPP) technique with the deep convolutional neural networks (CNNs) is proposed in this letter. The input of the proposed technique is a single FPP image, and the training and validation data sets are prepared by using the conventional multi-frequency FPP technique. Unlike the conventional 3D shape reconstruction methods which involve complex algorithms and intensive computation, the proposed approach uses an end-to-end network architecture to directly carry out the transformation of a 2D images to its corresponding 3D shape. Experiments have been conducted to demonstrate the validity and robustness of the proposed technique. It is capable of satisfying various 3D shape reconstruction demands in scientific research and engineering applications.

eess.IV↗

arXiv2019

Hyper-Resistive Model of Ultra High Energy Cosmic Ray Acceleration by Magnetically Collimated Jets Created by Active Galactic Nuclei

This is the fourth in a series of companion papers showing that, when an efficient dynamo can be maintained by accretion disks around supermassive black holes in Active Galactic Nuclei (AGNs), it will lead to the formation of a powerful, magnetically-collimated helix that could explain both the observed jet/radiolobe structures on very large scales and ultimately the enormous power inferred from the observed ultra high energy cosmic rays (UHECRs) with energies > 10^19 eV. Many timescales are involved in this process. Our hyper-resistive magnetohydrodynamic (MHD) model provides a bridge between General Relativistic MHD simulations of dynamo formation, on the short accretion timescale, and observational evidence of magnetic collimation of large-scale jets on astrophysical timescales. Given the final magnetic structure, we apply hyper-resistive kinetic theory to show how instability causes slowly-evolving magnetically-collimated jets to become the most powerful relativistic accelerators in the Universe. The model yields nine observables in reasonable agreement with observations: the jet length, radiolobe radius and apparent opening angle as observed by synchrotron radiation; the synchrotron total power, synchrotron wavelengths and maximum electron energy (TeVs); and the maximum UHECR energy, the cosmic ray energy spectrum and the cosmic ray intensity on Earth.

astro-ph.HE↗

arXiv2019

Formation of Power-law Electron Energy Spectra in Three-dimensional Low-$β$ Magnetic Reconnection

While observations have suggested that power-law electron energy spectra are a common outcome of strong energy release during magnetic reconnection, e.g., in solar flares, kinetic simulations have not been able to provide definite evidence of power-laws in energy spectra of non-relativistic reconnection. By means of 3D large-scale fully kinetic simulations, we study the formation of power-law electron energy spectra in non-relativistic low-$β$ reconnection. We find that both the global spectrum integrated over the entire domain and local spectra within individual regions of the reconnection layer have power-law tails with a spectral index $p \sim 4$ in the 3D simulation, which persist throughout the non-linear reconnection phase until saturation. In contrast, the spectrum in the 2D simulation rapidly evolves and quickly becomes soft. We show that 3D effects such as self-generated turbulence and chaotic magnetic field lines enable the transport of high-energy electrons across the reconnection layer and allow them to access several main acceleration regions. This leads to a sustained and nearly constant acceleration rate for electrons at different energies. We construct a model that explains the observed power-law spectral index in terms of the dynamical balance between particle acceleration and escape from main acceleration regions, which are defined based upon a threshold for the curvature drift acceleration term. This result could be important for explaining the formation of power-law energy spectrum in solar flares.

astro-ph.SR↗

arXiv2019

The Observability Of Vortex-Driven Spiral Arms In Protoplanetary Disk: Basic Spiral Properties

Some circumstellar disks are observed to show prominent spiral arms in infrared scattered light or (sub-)millimeter dust continuum. The spirals might be formed from self-gravity, shadows, or planet-disk interactions. Recently, it was hypothesized that massive vortices can drive spiral arms in protoplanetary disks in a way analogous to planets. In this paper, we study the basic properties of vortex-driven spirals by the Rossby Wave Instability in 2D hydrodynamics simulations. We study how the surface density contrast, the number, and the shape of vortex-driven spirals depend on the properties of the vortex. We also compare vortex-driven spirals with those induced by planets. The surface density contrast of vortex-driven spirals in our simulations are comparable to those driven by a sub-thermal mass planet, typically a few to a few tens of Earth masses. In addition, different from the latter, the former is not sensitive to the mass of the vortex. Vortex-driven spiral arms are not expected to be detectable in current scattered light observations, and the prominent spirals observed in scattered light in a few protoplanetary disks, such as SAO 206462 (HD 135344B), MWC 758, and LkHa 330, are unlikely to be induced by the candidate vortices in them.

astro-ph.EP↗

arXiv2019

Studies on the origin of the interfacial superconductivity of Sb2Te3/Fe1+yTe heterostructures

The recent discovery of the interfacial superconductivity (SC) of the Bi2Te3/Fe1+yTe heterostructure has attracted extensive studies due to its potential as a novel platform for trapping and controlling Majorana fermions. Here we present studies of another topological insulator (TI)/Fe1+yTe heterostructure, Sb2Te3/Fe1+yTe, which also enjoys an interfacial two-dimensional SC. The results of transport measurements support that the reduction of excess Fe concentration of the Fe1+yTe layer not only increases the fluctuation of its antiferromagnetic (AFM) order but also enhances the quality of the SC of this heterostructure system. On the other hand, the interfacial SC of this heterostructure was found to have a wider-ranging TI-layer thickness dependence than that of the Bi2Te3/Fe1+yTe heterostructure, which is believed to be attributed to the much higher bulk conductivity of Sb2Te3 that enhances indirect coupling between its top and bottom topological surface states (TSSs). Our results provide the evidence of the interplay among the AFM order, itinerant carries from the TSSs and the induced interfacial SC of the TI/Fe1+yTe heterostructure system.

cond-mat.supr-con↗

arXiv2019

Machine Learning Approach for Solar Wind Categorization

Solar wind classification is conducive to understand the physical processes ongoing at the Sun and solar wind evolution in the interplanetary space, and furthermore, it is helpful for early warning of space weather events. With rapid developments in the field of artificial intelligence, machine learning approaches are increasingly being used for pattern recognition. In this study, an approach from machine learning perspectives is developed to automatically classify the solar wind at 1 AU into four types: coronal-hole-origin, streamer-belt-origin, sector-reversal-region-origin, and ejecta. By exhaustive enumeration, an eight-dimensional scheme ($B_T$, $N_P$, $T_P$, $V_P$, $N_{αp}$, $T_{exp}/T_P$, $S_p$, and $M_f$) is found to perform the best among 8191 combinations of 13 solar wind parameters. 10 popular supervised machine learning models, namely $k$ Nearest Neighbors (KNN), Support Vector Machines with linear and Radial Basic Function kernels, Decision Tree, Random Forest, Adaptive Boosting, Neural Network, Gaussian Naive Bayes, Quadratic Discriminant Analysis, and Extreme Gradient Boosting, are applied to the labeled solar wind data sets. Among them, KNN classifier obtains the highest overall classification accuracy, 92.8%. It significantly improves the accuracy by 9.6% over existing manual schemes. No solar wind composition measurements are needed, permitting our classification scheme to be applied to most solar wind spacecraft data. Besides, two application examples indicate that solar wind classification is helpful for the risk evaluation of predicted magnetic storms and surface charging of geosynchronous spacecrafts.

physics.space-ph↗

arXiv2019

Kinetic simulations of fusion ignition with hot-spot ablator mix

Inertial confinement fusion fuel suffers increased X-ray radiation losses when carbon from the capsule ablator mixes into the hot-spot. Here we present one and two-dimensional ion Vlasov-Fokker-Planck simulations that resolve hot-spot self heating in the presence of a localized spike of carbon mix, totalling 1.9% of the hot-spot mass. The mix region cools and contracts over tens of picoseconds, increasing its alpha particle stopping power and radiative losses. This makes a localized mix region more severe than an equal amount of uniformly distributed mix. There is also a purely kinetic effect that reduces fusion reactivity by several percent, since faster ions in the tail of the distribution are absorbed by the mix region. Radiative cooling and contraction of the spike induces fluid motion, causing neutron spectrum broadening. This artificially increases the inferred experimental ion temperatures and gives line of sight variations.

physics.plasm-ph↗

arXiv2019

An \mathcal{O}(N) Maxwell solver with improved numerical dispersion properties

A Maxwell solver derived from finite element method with \mathcal{O}(N) computing cost is developed to improve the numerical dispersion properties in relativistic particle-in-cell (PIC) simulations. The correction of the dispersion relation of the electromagnetic wave is achieved using the neighboring cells via an iteration scheme without decomposing into Fourier modes. The local nature of the communication is ideally suited to massively parallel computer architectures. This Maxwell solver constrains the Numerical Cherenkov instability (NCI) for the ultra-relativistic drifting pair plasma in x direction to large wave vectors for two dimensional grid. The growth rate of NCI is suppressed by using the low pass filtering.

physics.plasm-ph↗

arXiv2019

Formation and evolution of globular clusters in cosmological simulations

In a series of three papers, we introduced a novel cluster formation model that describes the formation, growth, and disruption of star clusters in high-resolution cosmological simulations. We tested this model on a Milky Way-sized galaxy and found that various properties of young massive clusters, such as the mass function and formation efficiency, are consistent with observations in the local universe. Interestingly, most massive clusters -- globular cluster candidates -- are preferentially formed during major merger events. We follow the dynamical evolution of clusters in the galactic tidal field. Due to tidal disruption, the cluster mass function evolves from initial power law to a peaked shape. The surviving clusters at $z=0$ show a broad range of metallicity [Fe/H] from -3 to -0.5. A robust prediction of the model is the age--metallicity relation, in which metal-rich clusters are systematically younger than metal-poor clusters by up to 3 Gyr.

astro-ph.GA↗

arXiv2019

MIN: Co-Governing Multi-Identifier Network Architecture and its Prototype on Operator's Network

IP protocol is the core of TCP/IP network layer. However, since IP address and its Domain Name are allocated and managed by a single agency, there are risks of centralization. The semantic overload of IP address also reduces its scalability and mobility, which further hinders the security. This paper proposes a co-governing Multi-Identifier Network (MIN) architecture that constructs a network layer with parallel coexistence of multiple identifiers, including identity, content, geographic information, and IP address. On the management plane, we develop an efficient management system using consortium blockchain with voting consensus, so the network can simultaneously manage and support by hundreds or thousands of nodes with high throughput. On the data plane, we propose an algorithm merging hash table and prefix tree (HTP) for FIB, which avoids the false-negative error and can inter-translate different identifiers with tens of billions of entries. Further, we propose a scheme to transport IP packets using CCN as a tunnel for supporting progressive deployment. We deployed the prototype of MIN to the largest operators' network in Mainland China, Hongkong and Macao, and demonstrated that the network can register identifier under co-governing consensus algorithm, support VoD service very well.

cs.NI↗

arXiv2019

Feed-down effect on $Λ$ spin polarization

We develop a theoretical framework to study the feed-down effect of higher-lying strange baryons on the spin polarization of the $Λ$ hyperon. In this framework, we consider two-body decays through strong, electromagnetic, and weak processes and derive general formulas for the angular distribution and spin polarization of the daughter particle by adopting the helicity formalism. Using the realistic experimental data as input, we explore the feed-down contribution to the global and the local $Λ$ polarizations and find that such a contribution suppresses the primordial $Λ$ polarization, which is not strong enough to resolve the discrepancy between the current theoretical and the experimental results on the azimuthal-angle dependence of $Λ$ polarization. Our paper may also be useful for the measurement of spin polarization of baryons heavier than $Λ$ (e.g., $Ξ^-$) in future experiments.

nucl-th↗

arXiv2019

Epitaxial growth and characterization of high quality Bi2O2Se thin films on SrTiO3 substrates by pulsed laser deposition

Recently, Bi2O2Se is discovered as a promising two-dimensional (2D) semiconductor for next generation electronics, due to its moderate bandgap size, high electron mobility and pronounced ambient stability. Meanwhile, it has been predicted that high quality Bi2O2Se-related heterostructures may possess exotic physical phenomena, such as piezoelectricity and topological superconductivity. Herein, we report the first successful heteroepitaxial growth of Bi2O2Se films on SrTiO3 substrates via pulsed laser deposition (PLD) method. Films obtained under optimal conditions show an epitaxial growth with the c axis perpendicular to the film surface and the a and b axes parallel to the substrate. The growth mode transition to three dimensional (3D) island from quasi-2D layer of the heteroepitaxial Bi2O2Se films on SrTiO3 (001) substrates is observed as prolonging deposition time of films. The maximum value of electron mobility reaches 160 cm2/V-1s-1 at room temperature in a 70nm-thick film. The thickness dependent mobility provides evidence that interface-scattering is likely to be the limiting factor for the relatively low electron mobility at low temperature, implying that the interface engineering as an effective method to tune the low temperature electron mobility. Our work suggests the epitaxial Bi2O2Se films grown by PLD are promising for both fundamental study and practical applications.

cond-mat.mtrl-sci↗

arXiv2019

A New Automatic Tool for CME Detection and Tracking with Machine Learning Techniques

With the accumulation of big data of CME observations by coronagraphs, automatic detection and tracking of CMEs has proven to be crucial. The excellent performance of convolutional neural network in image classification, object detection and other computer vision tasks motivates us to apply it to CME detection and tracking as well. We have developed a new tool for CME Automatic detection and tracking with MachinE Learning (CAMEL) techniques. The system is a three-module pipeline. It is first a supervised image classification problem. We solve it by training a neural network LeNet with training labels obtained from an existing CME catalog. Those images containing CME structures are flagged as CME images. Next, to identify the CME region in each CME-flagged image, we use deep descriptor transforming to localize the common object in an image set. A following step is to apply the graph cut technique to finely tune the detected CME region. To track the CME in an image sequence, the binary images with detected CME pixels are converted from cartesian to polar coordinate. A CME event is labeled if it can move in at least two frames and reach the edge of coronagraph field of view. For each event, a few fundamental parameters are derived. The results of four representative CMEs with various characteristics are presented and compared with those from four existing automatic and manual catalogs. We find that CAMEL can detect more complete and weaker structures, and has better performance to catch a CME as early as possible.

astro-ph.SR↗