arXiv Science⌕ Search

arXiv subjects

Hui Chen

Publications and source records attributed to Hui Chen.

At least 217 records · Page 12Linked to original sources

Modeling and Analysis of OFDM-based 5G/6G Localization under Hardware Impairments

Localization is envisioned as a key enabler to satisfy the requirements of communication and context-aware services in the fifth/sixth generation (5G/6G) communication systems. User localization can be achieved based on delay and angle estimation using uplink/downlink pilot signals. However, hardware impairments (HWIs) (such as phase noise and mutual coupling) distort the signals at both the transmitter and receiver sides and thus affect the localization performance. While this impact can be ignored at lower frequencies with less severe HWIs, and less stringent localization requirements, modeling and analysis efforts are needed for high-frequency bands to assess degradation in localization accuracy due to HWIs. In this work, we model various types of impairments for a mmWave multiple-input-multiple-output communication system and conduct a misspecified Cramér-Rao bound analysis to evaluate HWI-induced performance losses in terms of angle/delay estimation and the resulting 3D position/orientation estimation error. We also investigate the effect of individual and overall HWIs on communication in terms of symbol error rate (SER). Our extensive simulation results demonstrate that each type of HWI leads to a different level of degradation in angle and delay estimation performance, and the prominent impairment factors on delay estimation will have a dominant negative effect on SER.

eess.SP↗

6G Localization and Sensing in the Near Field: Features, Opportunities, and Challenges

The far-field channel model has historically been used in wireless communications due to the simplicity of mathematical modeling and convenience for algorithm design. With the need for high data rates, low latency, and ubiquitous connectivity in the sixth generation (6G) of communication systems, new technology enablers such as extremely large antenna arrays (ELAAs), reconfigurable intelligent surfaces (RISs), and distributed multiple-input-multiple-output (D-MIMO) systems will be adopted. These enablers not only aim to improve communication services but also have an impact on localization and sensing (L&S), which are expected to be fundamentally built-in functionalities in future wireless systems. Despite appearing in different scenarios and supporting different frequency bands, such enablers share the so-called near-field (NF) features, which will provide extra geometric information conducive to L&S. In this work, we describe the NF features, namely, the spherical wave model, spatial non-stationarity, and beam squint effect. After discussing how L&S see NF differently from communication, the opportunities and open research challenges are provided.

cs.IT↗

DiffusionTalker: Personalization and Acceleration for Speech-Driven 3D Face Diffuser

Speech-driven 3D facial animation has been an attractive task in both academia and industry. Traditional methods mostly focus on learning a deterministic mapping from speech to animation. Recent approaches start to consider the non-deterministic fact of speech-driven 3D face animation and employ the diffusion model for the task. However, personalizing facial animation and accelerating animation generation are still two major limitations of existing diffusion-based methods. To address the above limitations, we propose DiffusionTalker, a diffusion-based method that utilizes contrastive learning to personalize 3D facial animation and knowledge distillation to accelerate 3D animation generation. Specifically, to enable personalization, we introduce a learnable talking identity to aggregate knowledge in audio sequences. The proposed identity embeddings extract customized facial cues across different people in a contrastive learning manner. During inference, users can obtain personalized facial animation based on input audio, reflecting a specific talking style. With a trained diffusion model with hundreds of steps, we distill it into a lightweight model with 8 steps for acceleration. Extensive experiments are conducted to demonstrate that our method outperforms state-of-the-art methods. The code will be released.

cs.CV↗

RIS Position and Orientation Estimation via Multi-Carrier Transmissions and Multiple Receivers

Reconfigurable intelligent surfaces (RISs) are considered as an enabling technology for the upcoming sixth generation of wireless systems, exhibiting significant potential for radio localization and sensing. An RIS is usually treated as an anchor point with known position and orientation when deployed to offer user localization. However, it can also be attached to a user to enable its localization in a semi-passive manner. In this paper, we consider a static user equipped with an RIS and study the RIS localization problem (i.e., joint three-dimensional position and orientation estimation), when operating in a system comprising a single-antenna transmitter and multiple synchronized single-antenna receivers with known locations. We present a multi-stage estimator using time-of-arrival and spatial frequency measurements, and derive the Cramér-Rao lower bounds for the estimated parameters to validate the estimator's performance. Our simulation results demonstrate the efficiency of the proposed RIS state estimation approach under various system operation parameters.

eess.SP↗

Multi-RIS-Enabled 3D Sidelink Positioning

Positioning is expected to be a core function in intelligent transportation systems (ITSs) to support communication and location-based services, such as autonomous driving, traffic control, etc. With the advent of low-cost reflective reconfigurable intelligent surfaces (RISs) to be deployed in beyond 5G/6G networks, extra anchors with high angular resolutions can boost signal quality and makes high-precision positioning with extended coverage possible in ITS scenarios. However, the passive nature of the RIS requires a signal source such as a base station (BS), which limits the positioning service in extreme situations, such as tunnels or dense urban areas, where 5G/6G BSs are not accessible. In this work, we show that with the assistance of (at least) two RISs and sidelink communication between two user equipments (UEs), these UEs can be localized even without any BSs involvement. A two-stage 3D sidelink positioning algorithm is proposed, benchmarked by the derived Cramér-Rao bounds. The effects of multipath and RIS profile designs on positioning performance are evaluated, and several scenarios with different RIS and UE locations are discussed for localizability analysis. Simulation results demonstrate the promising positioning accuracy of the proposed BS-free sidelink communication system in challenging ITS scenarios. Additionally, we propose and evaluate several solutions to eliminate potential blind areas where positioning performance is poor, such as removing clock offset via round-trip communication, adding geometrical prior or constraints, as well as introducing more RISs.

eess.SP↗

RIS-Aided Monostatic Sensing and Object Detection with Single and Double Bounce Multipath

We propose a framework for monostatic sensing by a user equipment (UE), aided by a reconfigurable intelligent surface (RIS) in environments with single- and double-bounce signal propagation. We design appropriate UE-side precoding and combining, to facilitate signal separation. We derive the adaptive detection probabilities of the resolvable signals, based on the geometric channel parameters of the links. Then, we estimate the passive objects using both the double-bounce signals via passive RIS (i.e., RIS-sensing) and the single-bounce multipath direct to the objects (i.e., non-RIS-sensing), based on a mapping filter. Finally, we provide numerical results to demonstrate that effective sensing can be achieved through the proposed framework.

eess.SP↗

Deep Incremental Learning of Imbalanced Data for Just-In-Time Software Defect Prediction

This work stems from three observations on prior Just-In-Time Software Defect Prediction (JIT-SDP) models. First, prior studies treat the JIT-SDP problem solely as a classification problem. Second, prior JIT-SDP studies do not consider that class balancing processing may change the underlying characteristics of software changeset data. Third, only a single source of concept drift, the class imbalance evolution is addressed in prior JIT-SDP incremental learning models. We propose an incremental learning framework called CPI-JIT for JIT-SDP. First, in addition to a classification modeling component, the framework includes a time-series forecast modeling component in order to learn temporal interdependent relationship in the changesets. Second, the framework features a purposefully designed over-sampling balancing technique based on SMOTE and Principal Curves called SMOTE-PC. SMOTE-PC preserves the underlying distribution of software changeset data. In this framework, we propose an incremental deep neural network model called DeepICP. Via an evaluation using \numprojs software projects, we show that: 1) SMOTE-PC improves the model's predictive performance; 2) to some software projects it can be beneficial for defect prediction to harness temporal interdependent relationship of software changesets; and 3) principal curves summarize the underlying distribution of changeset data and reveals a new source of concept drift that the DeepICP model is proposed to adapt to.

cs.SE↗

Bayesian Personalized Federated Learning with Shared and Personalized Uncertainty Representations

Bayesian personalized federated learning (BPFL) addresses challenges in existing personalized FL (PFL). BPFL aims to quantify the uncertainty and heterogeneity within and across clients towards uncertainty representations by addressing the statistical heterogeneity of client data. In PFL, some recent preliminary work proposes to decompose hidden neural representations into shared and local components and demonstrates interesting results. However, most of them do not address client uncertainty and heterogeneity in FL systems, while appropriately decoupling neural representations is challenging and often ad hoc. In this paper, we make the first attempt to introduce a general BPFL framework to decompose and jointly learn shared and personalized uncertainty representations on statistically heterogeneous client data over time. A Bayesian federated neural network BPFed instantiates BPFL by jointly learning cross-client shared uncertainty and client-specific personalized uncertainty over statistically heterogeneous and randomly participating clients. We further involve continual updating of prior distribution in BPFed to speed up the convergence and avoid catastrophic forgetting. Theoretical analysis and guarantees are provided in addition to the experimental evaluation of BPFed against the diversified baselines.

cs.LG↗

Atomically-precise engineering of spin-orbit polarons in a kagome magnetic Weyl semimetal

Atomically-precise engineering of defects in topological quantum materials, which is essential for constructing new artificial quantum materials with exotic properties and appealing for practical quantum applications, remains challenging due to the hindrances in modifying complex lattice with atomic precision. Here, we report the atomically-precise engineering of the vacancy-localized spin-orbital polarons (SOP) in a kagome magnetic Weyl semimetal Co3Sn2S2, using scanning tunneling microscope. We achieve the step-by-step repairing of the selected vacancies, which results in the formation of artificial sulfur vacancy with elaborate geometry. We find that that the bound states localized around the vacancies experience a symmetry-dependent energy shift towards Fermi level with increasing vacancy size. Strikingly, as vacancy size increases, the localized magnetic moments of SOPs are tunable and ultimately extended to the negative magnetic moments resulting from spin-orbit coupling in the kagome flat band. These findings establish a new platform for engineering atomic quantum states in topological quantum materials, offering potential for kagome-lattice-based spintronics and quantum technologies.

cond-mat.mes-hall↗

Confidence-based Visual Dispersal for Few-shot Unsupervised Domain Adaptation

Unsupervised domain adaptation aims to transfer knowledge from a fully-labeled source domain to an unlabeled target domain. However, in real-world scenarios, providing abundant labeled data even in the source domain can be infeasible due to the difficulty and high expense of annotation. To address this issue, recent works consider the Few-shot Unsupervised Domain Adaptation (FUDA) where only a few source samples are labeled, and conduct knowledge transfer via self-supervised learning methods. Yet existing methods generally overlook that the sparse label setting hinders learning reliable source knowledge for transfer. Additionally, the learning difficulty difference in target samples is different but ignored, leaving hard target samples poorly classified. To tackle both deficiencies, in this paper, we propose a novel Confidence-based Visual Dispersal Transfer learning method (C-VisDiT) for FUDA. Specifically, C-VisDiT consists of a cross-domain visual dispersal strategy that transfers only high-confidence source knowledge for model adaptation and an intra-domain visual dispersal strategy that guides the learning of hard target samples with easy ones. We conduct extensive experiments on Office-31, Office-Home, VisDA-C, and DomainNet benchmark datasets and the results demonstrate that the proposed C-VisDiT significantly outperforms state-of-the-art FUDA methods. Our code is available at https://github.com/Bostoncake/C-VisDiT.

cs.CV↗

Missing-modality Enabled Multi-modal Fusion Architecture for Medical Data

Fusing multi-modal data can improve the performance of deep learning models. However, missing modalities are common for medical data due to patients' specificity, which is detrimental to the performance of multi-modal models in applications. Therefore, it is critical to adapt the models to missing modalities. This study aimed to develop an efficient multi-modal fusion architecture for medical data that was robust to missing modalities and further improved the performance on disease diagnosis.X-ray chest radiographs for the image modality, radiology reports for the text modality, and structured value data for the tabular data modality were fused in this study. Each modality pair was fused with a Transformer-based bi-modal fusion module, and the three bi-modal fusion modules were then combined into a tri-modal fusion framework. Additionally, multivariate loss functions were introduced into the training process to improve model's robustness to missing modalities in the inference process. Finally, we designed comparison and ablation experiments for validating the effectiveness of the fusion, the robustness to missing modalities and the enhancements from each key component. Experiments were conducted on MIMIC-IV, MIMIC-CXR with the 14-label disease diagnosis task. Areas under the receiver operating characteristic curve (AUROC), the area under the precision-recall curve (AUPRC) were used to evaluate models' performance. The experimental results demonstrated that our proposed multi-modal fusion architecture effectively fused three modalities and showed strong robustness to missing modalities. This method is hopeful to be scaled to more modalities to enhance the clinical practicality of the model.

eess.IV↗

Generative Knowledge Graph Construction: A Review

Generative Knowledge Graph Construction (KGC) refers to those methods that leverage the sequence-to-sequence framework for building knowledge graphs, which is flexible and can be adapted to widespread tasks. In this study, we summarize the recent compelling progress in generative knowledge graph construction. We present the advantages and weaknesses of each paradigm in terms of different generation targets and provide theoretical insight and empirical analysis. Based on the review, we suggest promising research directions for the future. Our contributions are threefold: (1) We present a detailed, complete taxonomy for the generative KGC methods; (2) We provide a theoretical and empirical analysis of the generative KGC methods; (3) We propose several research directions that can be developed in the future.

cs.CL↗

Exploring Structured Semantic Prior for Multi Label Recognition with Incomplete Labels

Multi-label recognition (MLR) with incomplete labels is very challenging. Recent works strive to explore the image-to-label correspondence in the vision-language model, \ie, CLIP, to compensate for insufficient annotations. In spite of promising performance, they generally overlook the valuable prior about the label-to-label correspondence. In this paper, we advocate remedying the deficiency of label supervision for the MLR with incomplete labels by deriving a structured semantic prior about the label-to-label correspondence via a semantic prior prompter. We then present a novel Semantic Correspondence Prompt Network (SCPNet), which can thoroughly explore the structured semantic prior. A Prior-Enhanced Self-Supervised Learning method is further introduced to enhance the use of the prior. Comprehensive experiments and analyses on several widely used benchmark datasets show that our method significantly outperforms existing methods on all datasets, well demonstrating the effectiveness and the superiority of our method. Our code will be available at https://github.com/jameslahm/SCPNet.

cs.CV↗

Gradient estimates for the non-stationary Stokes system with the Navier boundary condition

For the non-stationary Stokes system, it is well-known that one can improve spatial regularity in the interior, but not near the boundary if it is coupled with the no-slip boundary condition. In this note we show that, to the contrary, spatial regularity can be improved near a flat boundary if it is coupled with the Navier boundary condition, with either infinite or finite slip length. The case with finite slip length is more difficult than the case with infinite slip length.

math.AP↗

A unique van Hove singularity in kagome superconductor CsV$_{3-x}$Ta$_x$Sb$_5$ with enhanced superconductivity

Van Hove singularity (VHS) has been considered as a driving source for unconventional superconductivity. A VHS in two-dimensional (2D) materials consists of a saddle point connecting electron-like and hole-like bands. In a rare case, when a VHS appears at Fermi level, both electron-like and hole-like conduction can coexist, giving rise to an enhanced density of states as well as an attractive component of Coulomb interaction for unconventional electronic pairing. However, this van Hove scenario is often destroyed by an incorrect chemical potential or competing instabilities. Here, by using angle-resolved photoemission measurements, we report the observation of a VHS perfectly aligned with the Fermi level in a kagome superconductor CsV$_{3-x}$Ta$_x$Sb$_5$ (x~0.4), in which a record-high superconducting transition temperature is achieved among all the current variants of AV$_3$Sb$_5$ (A=Cs, Rb, K) at ambient pressure. Doping dependent measurements reveal the important role of van Hove scenario in boosting superconductivity, and spectroscopic-imaging scanning tunneling microscopy measurements indicate a distinct superconducting state in this system.

cond-mat.supr-con↗

Reconstructing human activities via coupling mobile phone data with location-based social networks

In the era of big data, the ubiquity of location-aware portable devices provides an unprecedented opportunity to understand inhabitants' behavior and their interactions with the built environments. Among the widely used data resources, mobile phone data is the one passively collected and has the largest coverage in the population. However, mobile operators cannot pinpoint one user within meters, leading to the difficulties in activity inference. To that end, we propose a data analysis framework to identify user's activity via coupling the mobile phone data with location-based social networks (LBSN) data. The two datasets are integrated into a Bayesian inference module, considering people's circadian rhythms in both time and space. Specifically, the framework considers the pattern of arrival time to each type of facility and the spatial distribution of facilities. The former can be observed from the LBSN Data and the latter is provided by the points of interest (POIs) dataset. Taking Shanghai as an example, we reconstruct the activity chains of 1,000,000 active mobile phone users and analyze the temporal and spatial characteristics of each activity type. We assess the results with some official surveys and a real-world check-in dataset collected in Shanghai, indicating that the proposed method can capture and analyze human activities effectively. Next, we cluster users' inferred activity chains with a topic model to understand the behavior of different groups of users. This data analysis framework provides an example of reconstructing and understanding the activity of the population at an urban scale with big data fusion.

cs.SI↗

Zero Access Points 3D Cooperative Positioning via RIS and Sidelink Communications

Reconfigurable intelligent surfaces (RISs) are expected to be a main component of future 6G networks, due to their capability to create a controllable wireless environment, and achieve extended coverage and improved localization accuracy. In this paper, we present a novel cooperative positioning use case of the RIS in mmWave frequencies, and show that in the presence of RIS, together with sidelink communications, localization with zero access points (APs) is possible. We show that multiple (at least three) half-duplex single-antenna user equipments (UEs) can cooperatively estimate their positions through device-to-device communications with a single RIS as an anchor without the need for any APs. We start by formulating a three-dimensional positioning problem with Cramér-Rao lower bound (CRLB) derived for performance analysis. After that, we discuss the RIS profile design and the power allocation strategy between the UEs. Then, we propose low-complexity estimators for estimating the channel parameters and UEs' positions. Finally, we evaluate the performance of the proposed estimators and RIS profiles in the considered scenario via extensive simulations and show that sub-meter level positioning accuracy can be achieved under multi-path propagation.

eess.SP↗

Discovery and construction of surface kagome electronic states induced by p-d electronic hybridization

Kagome-lattice materials possess attractive properties for quantum computing applications, but their synthesis remains challenging. Herein, we show surface kagome electronic states (SKESs) on a Sn-terminated triangular Co3Sn2S2 surface, which are imprinted by vertical p-d electronic hybridization between the surface Sn (subsurface S) atoms and the buried Co kagome lattice network in the Co3Sn layer under the surface. Owing to the subsequent lateral hybridization of the Sn and S atoms in a corner-sharing manner, the kagome symmetry and topological electronic properties of the Co3Sn layer is proximate to the Sn surface. The SKESs and both hybridizations were verified via qPlus non-contact atomic force microscopy (nc-AFM) and density functional theory calculations. The construction of SKESs with tunable properties can be achieved by the atomic substitution of surface Sn (subsurface S) with other group III-V elements (Se or Te), which was demonstrated theoretically. This work exhibits the powerful capacity of nc-AFM in characterizing localized topological states and reveals the strategy for synthesis of large-area transition-metal-based kagome lattice materials using conventional surface deposition techniques.

cond-mat.mtrl-sci↗