arXiv Science⌕ Search

arXiv subjects

Hugo Parlier

Publications and source records attributed to Hugo Parlier.

At least 55 records · Page 3Linked to original sources

Flip graphs for infinite type surfaces

We associate to triangulations of infinite type surface a type of flip graph where simultaneous flips are allowed. Our main focus is on understanding exactly when two triangulations can be related by a sequence of flips. A consequence of our results is that flip graphs for infinite type surfaces have uncountably many connected components.

math.GT↗

Prime orthogeodesics, concave cores and families of identities on hyperbolic surfaces

We prove and explore a family of identities relating lengths of curves and orthogeodesics of hyperbolic surfaces. These identities hold over a large space of metrics including ones with hyperbolic cone points, and in particular, show how to extend a result of the first author to surfaces with cusps. One of the main ingredients in the approach is a partition of the set of orthogeodesics into sets depending on their dynamical behavior, which can be understood geometrically by relating them to geodesics on orbifold surfaces. These orbifold surfaces turn out to be exactly on the boundary of the space in which the underlying identity holds.

math.GT↗

Geodesic and orthogeodesic identities on hyperbolic surfaces

The lengths of geodesics on hyperbolic surfaces satisfy intriguing equations, known as identities, relating these lengths to geometric quantities of the surface. This paper is about a large family of identities that relate lengths of closed geodesics and orthogeodesics to boundary lengths or number of cusps. These include, as particular cases, identities due to Basmajian, to McShane and to Mirzakhani and Tan-Wong-Zhang. In stark contrast to previous identities, the identities presented here include the lengths taken among all closed geodesics.

math.GT↗

Measuring pants

We investigate the terms arising in an identity for hyperbolic surfaces proved by Luo and Tan, namely showing that they vary monotonically in terms of lengths and that they verify certain convexity properties. Using these properties, we deduce two results. As a first application, we show how to deduce a theorem of Thurston which states, in particular for closed hyperbolic surfaces, that if a simple length spectrum "dominates" another, then in fact the two surfaces are isometric. As a second application, we show how to find upper bounds on the number of pairs of pants of bounded length that only depend on the boundary length and the topology of the surface.

math.GT↗

The maximum number of systoles for genus two Riemann surfaces with abelian differentials

In this article, we provide bounds on systoles associated to a holomorphic $1$-form $ω$ on a Riemann surface $X$. In particular, we show that if $X$ has genus two, then, up to homotopy, there are at most $10$ systolic loops on $(X,ω)$ and, moreover, that this bound is realized by a unique translation surface up to homothety. For general genus $g$ and a holomorphic 1-form $ω$ with one zero, we provide the optimal upper bound, $6g-3$, on the number of homotopy classes of systoles. If, in addition, $X$ is hyperelliptic, then we prove that the optimal upper bound is $6g-5$.

math.GT↗

Geometric simplicial embeddings of arc-type graphs

In this paper, we investigate a family of graphs associated to collections of arcs on surfaces. These {\it multiarc graphs} naturally interpolate between arc graphs and flip graphs, both well studied objects in low dimensional geometry and topology. We show a number of rigidity results, namely showing that, under certain complexity conditions, that simplicial maps between them only arise in the "obvious way". We also observe that, again under necessary complexity conditions, subsurface strata are convex. Put together, these results imply that certain simplicial maps always give rise to convex images.

math.GT↗

Minimal length product over homology bases of manifolds

Minkowski's second theorem can be stated as an inequality for $n$-dimensional flat Finsler tori relating the volume and the minimal product of the lengths of closed geodesics which form a homology basis. In this paper we show how this fundamental result can be promoted to a principle holding for a larger class of Finsler manifolds. This includes manifolds for which first Betti number and dimension do no necessarily coincide, a prime example being the case of surfaces. This class of manifolds is described by a non-vanishing condition for the hyperdeterminant reduced modulo $2$ of the multilinear map induced by the fundamental class of the manifold on its first ${\mathbb Z}_2$-cohomology group using the cup product.

math.GT↗

Quantifying the sparseness of simple geodesics on hyperbolic surfaces

The goal of the article is to provide different explicit quantifications of the non density of simple closed geodesics on hyperbolic surfaces. In particular, we show that within any embedded metric disk on a surface, lies a disk of radius only depending on the topology of the surface (and the size of the first embedded disk), which is disjoint from any simple closed geodesic.

math.GT↗

Delaunay Triangulations of Points on Circles

Delaunay triangulations of a point set in the Euclidean plane are ubiquitous in a number of computational sciences, including computational geometry. Delaunay triangulations are not well defined as soon as 4 or more points are concyclic but since it is not a generic situation, this difficulty is usually handled by using a (symbolic or explicit) perturbation. As an alternative, we propose to define a canonical triangulation for a set of concyclic points by using a max-min angle characterization of Delaunay triangulations. This point of view leads to a well defined and unique triangulation as long as there are no symmetric quadruples of points. This unique triangulation can be computed in quasi-linear time by a very simple algorithm.

cs.CG↗

Chromatic numbers for the hyperbolic plane and discrete analogs

We study colorings of the hyperbolic plane, analogously to the Hadwiger-Nelson problem for the Euclidean plane. The idea is to color points using the minimum number of colors such that no two points at distance exactly $d$ are of the same color. The problem depends on $d$ and, following a strategy of Kloeckner, we show linear upper bounds on the necessary number of colors. In parallel, we study the same problem on $q$-regular trees and show analogous results. For both settings, we also consider a variant which consists in replacing $d$ with an interval of distances.

math.CO↗

Counting curves, and the stable length of currents

Let $γ_0$ be a curve on a surface $Σ$ of genus $g$ and with $r$ boundary components and let $π_1(Σ)\curvearrowright X$ be a discrete and cocompact action on some metric space. We study the asymptotic behavior of the number of curves $γ$ of type $γ_0$ with translation length at most $L$ on $X$. For example, as an application, we derive that for any finite generating set $S$ of $π_1(Σ)$ the limit $$\lim_{L\to\infty}\frac 1{L^{6g-6+2r}}\{γ\text{ of type }γ_0\text{ with }S\text{-translation length}\le L\}$$ exists and is positive. The main new technical tool is that the function which associates to each curve its stable length with respect to the action on $X$ extends to a (unique) continuous and homogenous function on the space of currents. We prove that this is indeed the case for any action of a torsion free hyperbolic group.

math.GT↗

Interrogating surface length spectra and quantifying isospectrality

This article is about inverse spectral problems for hyperbolic surfaces and in particular how length spectra relate to the geometry of the underlying surface. A quantitative answer is given to the following: how many questions do you need to ask a length spectrum to determine it completely? In answering this, a quantitative upper bound is given on the number of isospectral but non-isometric surfaces of a given genus.

math.DG↗

Geometric filling curves on surfaces

This note is about a type of quantitative density of closed geodesics on closed hyperbolic surfaces. The main results are upper bounds on the length of the shortest closed geodesic that $\varepsilon$-fills the surface.

math.GT↗

Short closed geodesics with self-intersections

Our main point of focus is the set of closed geodesics on hyperbolic surfaces. For any fixed integer $k$, we are interested in the set of all closed geodesics with at least $k$ (but possibly more) self-intersections. Among these, we consider those of minimal length and investigate their self-intersection numbers. We prove that their intersection numbers are upper bounded by a universal linear function in $k$ (which holds for any hyperbolic surface). Moreover, in the presence of cusps, we get bounds which imply that the self-intersection numbers behave asymptotically like $k$ for growing $k$.

math.GT↗

Distances in domino flip graphs

This article is about measuring and visualizing distances between domino tilings. Given two tilings of a simply connected square tiled surface, we're interested in the minimum number of flips between two tilings. Given a certain shape, we're interested in computing the diameters of the flip graphs, meaning the maximal distance between any two of its tilings. Building on work of Thurston and others, we give geometric interpretations of distances which result in formulas for the diameters of the flip graphs of rectangles or Aztec diamonds.

math.CO↗

Once punctured disks, non-convex polygons, and pointihedra

We explore several families of flip-graphs, all related to polygons or punctured polygons. In particular, we consider the topological flip-graphs of once-punctured polygons which, in turn, contain all possible geometric flip-graphs of polygons with a marked point as embedded sub-graphs. Our main focus is on the geometric properties of these graphs and how they relate to one another. In particular, we show that the embeddings between them are strongly convex (or, said otherwise, totally geodesic). We also find bounds on the diameters of these graphs, sometimes using the strongly convex embeddings. Finally, we show how these graphs relate to different polytopes, namely type D associahedra and a family of secondary polytopes which we call pointihedra.

math.CO↗

Arc and curve graphs for infinite-type surfaces

We study arc graphs and curve graphs for surfaces of infinite topological type. First, we define an arc graph relative to a finite number of (isolated) punctures and prove that it is a connected, uniformly hyperbolic graph of infinite diameter; this extends a recent result of J. Bavard to a large class of punctured surfaces. Second, we study the subgraph of the curve graph spanned by those elements which intersect a fixed separating curve on the surface. We show that this graph has infinite diameter and geometric rank 3, and thus is not hyperbolic.

math.GT↗

Modular flip-graphs of one holed surfaces

We study flip-graphs of triangulations on topological surfaces where distance is measured by counting the number of necessary flip operations between two triangulations. We focus on surfaces of positive genus $g$ with a single boundary curve and $n$ marked points on this curve; we consider triangulations up to homeomorphism with the marked points as their vertices. Our main results are upper and lower bounds on the maximal distance between triangulations depending on $n$ and can be thought of as bounds on the diameter of flip-graphs up to the quotient of underlying homeomorphism groups. The main results assert that the diameter of these quotient graphs grows at least like $5n/2$ for all $g\geq 1$. Our upper bounds grow at most like $[4 -1/(4g)]n$ for $g\geq 2$, and at most like $23n/8 $ for the torus.

math.GT↗