arXiv subjects

Hugo Aramberri

Publications and source records attributed to Hugo Aramberri.

At least 19 recordsLinked to original sources

arXiv2026

A family tree for hafnia

Several candidate reference phases have been proposed to discuss phase transitions and ferroelectricity in hafnia in recent years. Although these proposals comply with crystallographic requirements, a physically compelling rationale connecting parent and daughter phases is often lacking. This problem is aggravated by the absence of clearly dominant polarization switching pathways, making it difficult to formulate a robust physical criterion for identifying the relevant high-symmetry states. Here we use first-principles calculations to show that pressure provides a simple and robust criterion for establishing physically meaningful family relationships among many hafnia polymorphs, including the monoclinic ground state and the technologically relevant ferroelectric phase, and their respective parent structures. Our simulations also reveal several previously unreported phases, including higher-energy structures that act as common ancestors of the widely discussed cubic and orthorhombic reference phases.

cond-mat.mtrl-sci↗

arXiv2025

Minimalist machine-learned interatomic potentials can predict complex structural behaviors accurately

The past decade has witnessed a spectacular development of machine-learned interatomic potentials (MLIPs), to the extent that they are already the approach of choice for most atomistic simulation studies not requiring an explicit treatment of electrons. Typical MLIP usage guidelines emphasize the need for exhaustive training sets and warn against applying the models to situations not considered in the corresponding training space. This restricts the scope of MLIPs to interpolative calculations, essentially denying the possibility of using them to discover new phenomena in a serendipitous way. While there are reasons to be cautious, here we adopt a more sanguine view and challenge the predictive power of two representative and widely available MLIP approaches. We work with minimalist training sets that rely on little prior knowledge of the investigated materials. We show that the resulting models -- for which we adopt modest/default choices of the defining hyperparameters -- are very successful in predicting non-trivial structural effects (competing polymorphs, energy barriers for structural transformations, occurrence of non-trivial topologies) in a way that is qualitatively and quasi-quantitatively correct. Our results thus suggest an expanded scope of modern MLIP approaches, evidencing that somewhat trivial -- and easy to compute -- models can be an effective tool for the discovery of novel and complex physical phenomena.

cond-mat.mtrl-sci↗

arXiv2025

Chiral soft mode transition driven by strain in ferroelectric bubble domains

Chirality in solids is attracting growing attention as a potential ferroic order, yet virtually no paradigmatic example of a soft-mode achiral-to-chiral phase transition has been firmly established to date. Here we identify ferroelectric bubble domains as a model system that undergoes a strain-driven achiral-to-chiral transition exhibiting the hallmarks of spontaneous symmetry breaking. Using second-principles atomistic simulations, we uncover chiral phonon modes in ferroelectric/dielectric superlattices that soften under epitaxial strain following textbook soft-mode behaviour. The transition is accompanied by a change in topological character, highlighting an interplay between chirality and topology in these systems. This work provides a concrete step towards establishing chirality as a genuine ferroic order in solids.

cond-mat.mtrl-sci↗

arXiv2025

Machine learning Landau free energy potentials

We show how to construct Landau-like free energy potentials using a machine-learning approach. For concreteness, we focus on perovskite oxide PbTiO$_{3}$. We work with a training set obtained from Monte Carlo simulations based on an atomistic ''second-principles'' potential for PbTiO$_{3}$. We rely exclusively on data that would be experimentally accessible -- i.e., temperature-dependent polarization and strain, both with and without external electric fields and stresses applied --, to explore scenarios where the training set could be obtained from laboratory measurements. We introduce a scheme that allows us to identify optimal polynomial models of the temperature-dependent free energy surface, mapped as a function of the homogeneous electric polarization and homogeneous strain. Our results for PbTiO$_{3}$ show that a very simple polynomial -- where only two parameters depend linearly on temperature -- is sufficient to yield a correct description of the material's behavior. Remarkably, the obtained models also capture the subtle couplings by which elastic strain controls key features of ferroelectricity in PbTiO$_{3}$ -- i.e., the symmetry of the polar phase and the discontinuous character of the transition --, despite the fact that no effort was made to include such information in the training set. We emphasize the distinctive aspects of our methodology (which relies on an original form of validation step) by comparing it with the usual machine-learning approach for model construction. Our results illustrate how physically motivated models can have remarkable predictive power, even if they are derived from a limited amount of data. We argue that such ''third-principles'' models can be the basis for predictive macroscopic or mesoscopic simulations of ferroelectrics and other materials undergoing non-reconstructive structural transitions.

cond-mat.mtrl-sci↗

arXiv2024

Creating currents of electric bubbles

The experimental demonstration of electric skyrmion bubbles and the recent prediction of their Brownian motion have brought topological ferroelectrics close to their magnetic counterparts. Electric bubbles (e-bubbles) could potentially be leveraged in applications for which magnetic skyrmions have been proposed (e.g., neuromorphic computing). Yet, we still lack a strategy to create currents of e-bubbles. Here, using predictive atomistic simulations, we illustrate two approaches to induce e-bubble currents by application of suitable electric fields, static or dynamic. We focus on regimes where e-bubbles display spontaneous diffusion, which allows us to generate a current by simply biasing their Brownian motion. Our calculations indicate that e-bubble velocities over 25 m/s can be achieved at room temperature, suggesting that these electric quasiparticles could rival the speeds of magnetic skyrmions upon further optimization.

cond-mat.mtrl-sci↗

arXiv2024

Elastic amplification from negative capacitance

Ferroelectrics under suitable electric boundary conditions can present a negative capacitance response, whereby the total voltage drop across the ferroelectric opposes the externally applied bias. When the ferroelectric is in a heterostructure, this behavior yields a voltage amplification in the other elements, an effect that could be leveraged in low-power electronic devices. Interestingly, the mentioned voltage amplification should have an accompanying elastic effect. Specifically, in the typical case that the materials in contact with the ferroelectric are non-polar dielectrics, those should present an enhanced electrostrictive response. Here we use atomistic simulations - of model PbTiO$_{3}$/SrTiO$_{3}$ ferroelectric/dielectric superlattices displaying negative capacitance - to show that this is indeed the case: we reveal the enhanced elastic response of the dielectric layer and show that it is clearly linked to the voltage amplification. We argue that this "elastic amplification" could serve as a convenient experimental fingerprint for negative capacitance. Further, we propose that it may have interest on its own, e.g. for the development of low-power electromechanical actuators.

cond-mat.mtrl-sci↗

arXiv2024

Liquid-crystal-like dynamic transition in ferroelectric/dielectric superlattices

Nanostructured ferroelectrics display exotic multidomain configurations resulting from the electrostatic and elastic boundary conditions they are subject to. While the ferroelectric domains appear frozen in experimental images, atomistic second-principles studies suggest that they may become spontaneously mobile upon heating, with the polar order {\sl melting} in a liquid-like fashion. Here we run molecular dynamics simulations of model systems (PbTiO$_3$/SrTiO$_3$ superlattices) to study the unique features of this transformation. Most notably, we find that the multidomain state looses its translational and orientational orders at different temperatures, resembling the behavior of liquid crystals and yielding an intermediate hexatic-like phase. Our simulations reveal the mechanism responsible for the melting and allow us to characterize the stochastic dynamics in the hexatic-like phase: we find evidence that it is thermally activated, with domain reorientation rates that grow from tens of gigahertzs to terahertzs in a narrow temperature window.

cond-mat.mtrl-sci↗

arXiv2023

Brownian electric bubble quasiparticles

Recent works on electric bubbles (including the experimental demonstration of electric skyrmions) constitute a breakthrough akin to the discovery of magnetic skyrmions some 15 years ago. So far research has focused on obtaining and visualizing these objects, which often appear to be immobile (pinned) in experiments. Thus, critical aspects of magnetic skyrmions - e.g., their quasiparticle nature, Brownian motion - remain unexplored (unproven) for electric bubbles. Here we use predictive atomistic simulations to investigate the basic dynamical properties of these objects in pinning-free model systems. We show that it is possible to find regimes where the electric bubbles can present long lifetimes ($\sim$ ns) despite being relatively small ($\varnothing <$ 2 nm). Additionally, we find that they can display stochastic dynamics with large and highly tunable diffusion constants. We thus establish the quasiparticle nature of electric bubbles and put them forward for the physical effects and applications (e.g., in token-based Probabilistic Computing) considered for magnetic skyrmions.

cond-mat.mtrl-sci↗

arXiv2023

Kittel law and domain formation mechanism in PbTiO$_3$/SrTiO$_3$ superlattices

We report second-principles simulations on the structural and energetic properties of domains in (PbTiO$_{3}$)$_{n}$/(SrTiO$_{3}$)$_{n}$ superlattices. For the explored layer thickness ($n$ ranging between 8 and 16 unit cells) and lateral sizes of the domains, the most stable configuration corresponds to polar domains separated by a sequence of counter-rotating vortices (clockwise/counterclockwise) perpendicular to the stacking direction and acting as domain walls. The balance between the domain wall energy and the electrostatic energy yields to an optimal domain period $\omega$ that is proportional to the square-root of the thickness of the PbTiO$_{3}$ layer, following the Kittel law. For a given lateral size of the simulation box, suboptimal domain structures (with a width larger than the one predicted by the Kittel law) can be obtained in a metastable form. However, at finite temperature, molecular dynamics simulations show the spontaneous change of periodicity, which implies the formation of new domains whose generation is initiated by the nucleation of vortices and antivortices at the interface between the SrTiO$_{3}$ and the PbTiO$_{3}$ layers. The vortices progressively elongate and eventually annihilate with the antivortices yielding the formation of new domains to comply the Kittel law via a topological phase transition.

cond-mat.mtrl-sci↗

arXiv2023

Theoretical approach to ferroelectricity in hafnia and related materials

Hafnia ferroelectrics combine technological promise and unprecedented behaviors. Their peculiarity stems from the many active extrinsic mechanisms that contribute to their properties and from a continuously growing number of novel intrinsic features. Partly because of their unconventional nature, basic questions about these materials remain open and one may wonder about the pertinence of some frequent theoretical assumptions. Aided by first-principles simulations, here we show that, by adopting an original high-symmetry reference phase as the starting point of the analysis, we can develop a mathematically simple and physically transparent treatment of the ferroelectric state of hafnia. The proposed approach describes hafnia as a uniaxial ferroic, as suggested by recent studies of (woken-up) samples with well developed polarization. Also, it is compatible with the occurrence of polar soft modes and proper ferroelectric order. Further, our theory provides a straightforward and unified description of all low-energy polymorphs, shedding light into old questions (e.g., the prevalence of the monoclinic ground state), pointing at exciting possibilities (e.g., an antiferroelastic behavior) and facilitating the future development of perturbative theories (from Landau to second-principles potentials). Our work thus yields a deeper understanding of hafnia ferroelectrics, improving our ability to optimize their properties and induce new ones.

cond-mat.mtrl-sci↗

arXiv2023

A 2D ferroelectric vortex lattice in twisted BaTiO3 freestanding layers

The wealth of complex polar topologies recently found in nanoscale ferroelectrics result from a delicate balance between the materials intrinsic tendency to develop a homogeneous polarization and the electric and mechanic boundary conditions imposed upon them. Ferroelectric dielectric interfaces are model systems where polarization curling originates from open circuit like electric boundary conditions, to avoid the build-up of polarization charges through the formation of flux closure domains that evolve into vortex like structures at the nanoscale. Interestingly, while ferroelectricity is known to couple strongly to strain (both homogeneous and inhomogeneous), the effect of mechanical constraints on thin film nanoscale ferroelectrics has been comparatively less explored because of the relative paucity of strain patterns that can be implemented experimentally. Here we show that the stacking of freestanding ferroelectric perovskite layers with controlled twist angles opens an unprecedented opportunity to tailor these topological nanostructures in a way determined by the lateral strain modulation associated to the twisting. Interestingly, we find that a peculiar pattern of polarization vortices and antivortices emerges from the flexoelectric coupling of polarization to strain gradients. This finding opens exciting opportunities to create two-dimensional high density vortex crystals that would allow us to explore novel physical effects and functionalities.

cond-mat.mes-hall↗

arXiv2022

Investigating the Electromechanical Behavior of Unconventionally Ferroelectric $Hf_{0.5}Zr_{0.5}O_{2}$-based Capacitors Through Operando Nanobeam X-ray Diffraction

Understanding various aspects of ferroelectricity in hafnia-based nanomaterials is of vital importance for the development of future non-volatile memory and logic devices. Here, the unconventional and weak electromechanical response of epitaxial $La_{0.67}Sr_{0.33}MnO_{3}$/$Hf_{0.5}Zr_{0.5}O_{2}$/$La_{0.67}Sr_{0.33}MnO_{3}$ ferroelectric capacitors is investigated, via the sensitivity offered by nanobeam X-ray diffraction experiments during application of electrical bias. It is shown that the pristine rhombohedral phase exhibits a negative linear piezoelectric effect with piezoelectric coefficient ($d_{33}$) ~ -0.5 to -0.8 pm$V^{-1}$. First-principles calculations support an intrinsic negative piezoresponse. In addition, it is found that the piezoelectric response is suppressed above the coercive voltage. For higher voltages, and with the onset of DC conductivity throughout the capacitor, a second-order effect is observed. The electromechanical response observed in this work is clearly different from that of normal ferroelectrics, again underlining the unconventional nature of polarization switching in the samples.

cond-mat.mtrl-sci↗

arXiv2022

High power density energy harvesting devices based on the anomalous Nernst effect of Co/Pt magnetic multilayers

The anomalous Nernst effect (ANE) is a thermomagnetic phenomenon with potential applications in thermal energy harvesting. While many recent works studied the approaches to increase the ANE coefficient of materials, relatively little effort was devoted to increasing the power supplied by the effect. Here we demonstrate a nanofabricated device with record power density generated by the ANE. To accomplish this, we fabricate micrometer-sized devices in which the thermal gradient is three orders of magnitude higher than conventional macroscopic devices. In addition, we use Co/Pt multilayers, a system characterized by a high ANE thermopower (~1 microV/K), low electrical resistivity, and perpendicular magnetic anisotropy. These innovations allow us to obtain power densities of around 13 W/cm3. We believe that this design may find uses in harvesting wasted energy in e.g. electronic devices.

cond-mat.mtrl-sci↗

arXiv2022

Giant voltage amplification from incipient ferroelectric states

Ferroelectrics subject to suitable electric boundary conditions present a steady negative capacitance response. When the ferroelectric is in a heterostructure, this behavior yields a voltage amplification in the other elements, which experience a potential difference larger than the one applied, holding promise for low-power electronics. So far research has focused on verifying this effect and little is known about how to optimize it. Here we describe an electrostatic theory of ferroelectric/dielectric superlattices, convenient model systems, and show the relationship between the negative permittivity of the ferroelectric layers and the voltage amplification in the dielectric ones. Then, we run simulations of PbTiO3/SrTiO3 superlattices to reveal the factors most strongly affecting the amplification. In particular, we find that giant effects (up to 10-fold increases) can be obtained when PbTiO3 is brought close to the so-called "incipient ferroelectric" state.

cond-mat.mtrl-sci↗

arXiv2021

Ferroelectric/paraelectric superlattices for energy storage

The polarization response of antiferroelectrics to electric fields is such that the materials can store large energy densities, which makes them promising candidates for energy storage applications in pulsed-power technologies. However, relatively few materials of this kind are known. Here we consider ferroelectric/paraelectric superlattices as artificial electrostatically-engineered antiferroelectrics. Specifically, using high-throughput second-principles calculations, we engineer PbTiO$_{3}$/SrTiO$_{3}$ superlattices to optimize their energy-storage performance at room temperature (to maximize density and release efficiency) with respect to different design variables (layer thicknesses, epitaxial conditions, stiffness of the dielectric layer). We obtain results competitive with the state-of-the-art antiferroelectric capacitors and reveal the mechanisms responsible for the optimal properties.

cond-mat.mtrl-sci↗

arXiv2021

On the possibility that PbZrO$_3$ not be antiferroelectric

Lead zirconate (PbZrO$_3$) is considered the prototypical antiferroelectric material with an antipolar ground state. Yet, several experimental and theoretical works hint at a partially polar behaviour in this compound, indicating that the polarization may not be completely compensated. In this work we propose a simple ferrielectric structure for lead zirconate. First-principles calculations reveal this state to be more stable than the commonly accepted antiferroelectric phase at low temperatures, possibly up to room temperature, suggesting that PbZrO$_3$ may not be antiferroelectric at ambient conditions. We discuss the implications of our discovery, how it can be reconciled with experimental observations and how the ferrielectric phase could be obtained in practice.

cond-mat.mtrl-sci↗

arXiv2021

Piezoelectricity in hafnia

Because of its compatibility with semiconductor-based technologies, hafnia (HfO$_{2}$) is today's most promising ferroelectric material for applications in electronics. Yet, knowledge on the ferroic and electromechanical response properties of this all-important compound is still lacking. Interestingly, HfO$_2$ has recently been predicted to display a negative longitudinal piezoelectric effect, which sets it apart form classic ferroelectrics (e.g., perovskite oxides like PbTiO$_3$) and is reminiscent of the behavior of some organic compounds. The present work corroborates this behavior, by first-principles calculations and an experimental investigation of HfO$_2$ thin films using piezoresponse force microscopy. Further,the simulations show how the chemical coordination of the active oxygen atoms is responsible for the negative longitudinal piezoelectric effect. Building on these insights, it is predicted that, by controlling the environment of such active oxygens (e.g., by means of an epitaxial strain), it is possible to change the sign of the piezoelectric response of the material.

cond-mat.mtrl-sci↗

arXiv2020

Noncollinear Magnetic Modulation of Weyl Nodes in Ferrimagnetic Mn$_3$Ga

The tetragonal ferrimagnetic Mn$_3$Ga exhibits a wide range of intriguing magnetic properties. Here, we report the emergence of topologically nontrivial nodal lines in the absence of spin orbit coupling (SOC) which are protected by both mirror and $C_{4z}$ rotational symmetries. In the presence of SOC we demonstrate that the doubly degenerate nontrivial crossing points evolve into $C_{4z}$-protected Weyl nodes with chiral charge of $\pm$2. Furthermore, we have considered the experimentally reported noncollinear ferrimagnetic structure, where the magnetic moment of the Mn$_I$ atom (on the Mn-Ga plane) is tilted by an angle $\theta$ with respect to the crystallographic $c$ axis. The evolution of the Weyl nodes with $\theta$ reveals that the double Weyl nodes split into a pair of charge-1 Weyl nodes whose separation can be tuned by the magnetic orientation in the noncollinear ferrimagnetic structure.

cond-mat.mtrl-sci↗