arXiv Science⌕ Search

arXiv subjects

Hsiao-Ping Hsu

Publications and source records attributed to Hsiao-Ping Hsu.

48 records · Page 3Linked to original sources

Monte Carlo Protein Folding: Simulations of Met-Enkephalin with Solvent-Accessible Area Parameterizations

Treating realistically the ambient water is one of the main difficulties in applying Monte Carlo methods to protein folding. The solvent-accessible area method, a popular method for treating water implicitly, is investigated by means of Metropolis simulations of the brain peptide Met-Enkephalin. For the phenomenological energy function ECEPP/2 nine atomic solvation parameter (ASP) sets are studied that had been proposed by previous authors. The simulations are compared with each other, with simulations with a distance dependent electrostatic permittivity $ε(r)$, and with vacuum simulations ($ε=2$). Parallel tempering and a recently proposed biased Metropolis technique are employed and their performances are evaluated. The measured observables include energy and dihedral probability densities (pds), integrated autocorrelation times, and acceptance rates. Two of the ASP sets turn out to be unsuitable for these simulations. For all other sets, selected configurations are minimized in search of the global energy minima. Unique minima are found for the vacuum and the $ε(r)$ system, but for none of the ASP models. Other observables show a remarkable dependence on the ASPs. In particular, autocorrelation times vary dramatically with the ASP parameters. Three ASP sets have much smaller autocorrelations at 300 K than the vacuum simulations, opening the possibility that simulations can be speeded up vastly by judiciously chosing details of the force

cond-mat.soft↗

Scaling of Star Polymers with one to 80 Arms

We present large statistics simulations of 3-dimensional star polymers with up to $f=80$ arms, and with up to 4000 monomers per arm for small values of $f$. They were done for the Domb-Joyce model on the simple cubic lattice. This is a model with soft core exclusion which allows multiple occupancy of sites but punishes each same-site pair of monomers with a Boltzmann factor $v<1$. We use this to allow all arms to be attached at the central site, and we use the `magic' value $v=0.6$ to minimize corrections to scaling. The simulations are made with a very efficient chain growth algorithm with resampling, PERM, modified to allow simultaneous growth of all arms. This allows us to measure not only the swelling (as observed from the center-to-end distances), but also the partition sum. The latter gives very precise estimates of the critical exponents $γ_f$. For completeness we made also extensive simulations of linear (unbranched) polymers which give the best estimates for the exponent $γ$.

cond-mat.soft↗

Effective interactions between star polymers

We study numerically the effective pair potential between star polymers with equal arm lengths and equal number $f$ of arms. The simulations were done for the soft core Domb-Joyce model on the simple cubic lattice, to minimize corrections to scaling and to allow for an unlimited number of arms. For the sampling, we used the pruned-enriched Rosenbluth method (PERM). We find that the potential is much less soft than claimed in previous papers, in particular for $f\gg 1$. While we verify the logarithmic divergence of $V(r)$, with $r$ being the distance between the two cores, predicted by Witten and Pincus, we find for $f>20$ that the Mayer function is hardly distinguishable from that for a Gaussian potential.

cond-mat.soft↗

Polymers Confined between Two Parallel Plane Walls

Single three dimensional polymers confined to a slab, i.e. to the region between two parallel plane walls, are studied by Monte Carlo simulations. They are described by $N$-step walks on a simple cubic lattice confined to the region $1 \le z \le D$. The simulations cover both regions $D << R_F$ and $D >> R_F$ (where $R_F \sim N^ν$ is the Flory radius, with $ν\approx 0.587$), as well as the cross-over region in between. Chain lengths are up to $N=80,000$, slab widths up to D=120. In order to test the analysis program and to check for finite size corrections, we actually studied three different models: (a) Ordinary random walks (mimicking $Θ$-polymers); (b) Self-avoiding walks (SAW); and (c) Domb-Joyce walks with the self-repulsion tuned to the point where finite size corrections for free (unrestricted) chains are minimal. For the simulations we employ the pruned-enriched-Rosenbluth method (PERM) with Markovian anticipation. In addition to the partition sum (which gives us a direct estimate of the forces exerted onto the walls), we measure the density profiles of monomers and of end points transverse to the slab, and the radial extent of the chain parallel to the walls. All scaling laws and some of the universal amplitude ratios are compared to theoretical predictions.

cond-mat.soft↗

2-Dimensional Polymers Confined in a Strip

Single two dimensional polymers confined to a strip are studied by Monte Carlo simulations. They are described by N-step self-avoiding random walks on a square lattice between two parallel hard walls with distance 1 << D << N^ν(ν= 3/4 is the Flory exponent). For the simulations we employ the pruned-enriched-Rosenbluth method (PERM) with Markovian anticipation. We measure the densities of monomers and of end points as functions of the distance from the walls, the longitudinal extent of the chain, and the forces exerted on the walls. Their scaling with D and the universal ratio between force and monomer density at the wall are compared to theoretical predictions.

cond-mat.soft↗

Structure optimization in an off-lattice protein model

We study an off-lattice protein toy model with two species of monomers interacting through modified Lennard-Jones interactions. Low energy configurations are optimized using the pruned-enriched-Rosenbluth method (PERM), hitherto employed to native state searches only for off lattice models. For 2 dimensions we found states with lower energy than previously proposed putative ground states, for all chain lengths $\ge 13$. This indicates that PERM has the potential to produce native states also for more realistic protein models. For $d=3$, where no published ground states exist, we present some putative lowest energy states for future comparison with other methods.

cond-mat.stat-mech↗

Metropolis simulations of Met-Enkephalin with solvent-accessible area parameterizations

We investigate the solvent-accessible area method by means of Metropolis simulations of the brain peptide Met-Enkephalin at 300$ K$. For the energy function ECEPP/2 nine atomic solvation parameter (ASP) sets are studied. The simulations are compared with one another, with simulations with a distance dependent electrostatic permittivity $ε(r)$, and with vacuum simulations ($ε=2$). Parallel tempering and the biased Metropolis techniques RM$_1$ are employed and their performance is evaluated. The measured observables include energy and dihedral probability densities (pds), integrated autocorrelation times, and acceptance rates. Two of the ASP sets turn out to be unsuitable for these simulations. For all other systems selected configurations are minimized in search of the global energy minima, which are found for the vacuum and the $ε(r)$ system, but for none of the ASP models. Other observables show a remarkable dependence on the ASPs. In particular, we find three ASP sets for which the autocorrelations at 300$ $K are considerably smaller than for vacuum simulations.

cond-mat.stat-mech↗

Growth Algorithms for Lattice Heteropolymers at Low Temperatures

Two improved versions of the pruned-enriched-Rosenbluth method (PERM) are proposed and tested on simple models of lattice heteropolymers. Both are found to outperform not only the previous version of PERM, but also all other stochastic algorithms which have been employed on this problem, except for the core directed chain growth method (CG) of Beutler & Dill. In nearly all test cases they are faster in finding low-energy states, and in many cases they found new lowest energy states missed in previous papers. The CG method is superior to our method in some cases, but less efficient in others. On the other hand, the CG method uses heavily heuristics based on presumptions about the hydrophobic core and does not give thermodynamic properties, while the present method is a fully blind general purpose algorithm giving correct Boltzmann-Gibbs weights, and can be applied in principle to any stochastic sampling problem.

cond-mat.stat-mech↗

A Growth-based Optimization Algorithm for Lattice Heteropolymers

An improved version of the pruned-enriched-Rosenbluth method (PERM) is proposed and tested on finding lowest energy states in simple models of lattice heteropolymers. It is found to outperform not only the previous version of PERM, but also all other fully blind general purpose stochastic algorithms which have been employed on this problem. In many cases it found new lowest energy states missed in previous papers. Limitations are discussed.

cond-mat.stat-mech↗

Collapsed 2-Dimensional Polymers on a Cylinder

Single partially confined collapsed polymers are studied in two dimensions. They are described by self-avoiding random walks with nearest-neighbour attractions below the $Θ$-point, on the surface of an infinitely long cylinder. For the simulations we employ the pruned-enriched-Rosenbluth method (PERM). The same model had previously been studied for free polymers (infinite lattice, no boundaries) and for polymers on finite lattices with periodic boundary conditions. We verify the previous estimates of bulk densities, bulk free energies, and surface tensions. We find that the free energy of a polymer with fixed length $N$ has, for $N\to \infty$, a minimum at a finite cylinder radius $R^*$ which diverges as $T\to T_θ$. Furthermore, the surface tension vanishes roughly as $(T_θ-T)^α$ for $T\to T_θ$ with $α\approx 1.7$. The density in the interior of a globule scales as $(T_θ-T)^β$ with $β\approx 0.32$.

cond-mat.stat-mech↗

Stretched Polymers in a Poor Solvent

Stretched polymers with attractive interaction are studied in two and three dimensions. They are described by biased self-avoiding random walks with nearest neighbour attraction. The bias corresponds to opposite forces applied to the first and last monomers. We show that both in $d=2$ and $d=3$ a phase transition occurs as this force is increased beyond a critical value, where the polymer changes from a collapsed globule to a stretched configuration. This transition is second order in $d=2$ and first order in $d=3$. For $d=2$ we predict the transition point quantitatively from properties of the unstretched polymer. This is not possible in $d=3$, but even there we can estimate the transition point precisely, and we can study the scaling at temperatures slightly below the collapse temperature of the unstretched polymer. We find very large finite size corrections which would make very difficult the estimate of the transition point from straightforward simulations.

cond-mat.stat-mech↗

Universal scaling functions for bond percolation on planar random and square lattices with multiple percolating clusters

Percolation models with multiple percolating clusters have attracted much attention in recent years. Here we use Monte Carlo simulations to study bond percolation on $L_{1}\times L_{2}$ planar random lattices, duals of random lattices, and square lattices with free and periodic boundary conditions, in vertical and horizontal directions, respectively, and with various aspect ratio $L_{1}/L_{2}$. We calculate the probability for the appearance of $n$ percolating clusters, $W_{n},$ the percolating probabilities, $P$, the average fraction of lattice bonds (sites) in the percolating clusters, $ _{n}$ ($ _{n}$), and the probability distribution function for the fraction $c$ of lattice bonds (sites), in percolating clusters of subgraphs with $n$ percolating clusters, $f_{n}(c^{b})$ ($f_{n}(c^{s})$). Using a small number of nonuniversal metric factors, we find that $W_{n}$, $P$, $ _{n}$ ($ _{n}$), and $f_{n}(c^{b})$ ($f_{n}(c^{s})$) for random lattices, duals of random lattices, and square lattices have the same universal finite-size scaling functions. We also find that nonuniversal metric factors are independent of boundary conditions and aspect ratios.

cond-mat.stat-mech↗