arXiv subjects

Hooman Danesh

Publications and source records attributed to Hooman Danesh.

6 recordsLinked to original sources

arXiv2026

Data-efficient Bayesian-guided design selection from large candidate sets: Application to hyperelastic stochastic metamaterials

From a pool of admissible designs, we aim to identify a structure that achieves a target macroscopic stress response. For each candidate, the response is obtained from a high-fidelity oracle, such as expensive computational homogenization or experiments. We consider cases in which (i) the geometry cannot be conveniently parameterized, rendering gradient-based optimization inapplicable, and (ii) brute-force evaluation of all candidates is infeasible due to costly oracle queries. To tackle this challenge, we propose a Bayesian-guided design selection framework. The dimensionality of design variants is reduced through statistical feature engineering, and the resulting low-dimensional descriptors are mapped to effective hyperelastic constitutive parameters using a multi-output Gaussian process surrogate. The surrogate is trained using uncertainty-driven active learning with only a limited number of high-fidelity oracle evaluations. The surrogate shortlists promising candidates, and since its accuracy is inherently limited, the final selection of the optimal design is performed through high-fidelity oracle evaluations within the shortlist. In numerical test cases, we consider a design set of 50,000 candidate structures. Active learning requires labeling less than half a percent of the entire candidate set. Bayesian-guided design selection reaches a prescribed error threshold with only a handful of oracle evaluations in most cases.

cs.CE↗

arXiv2025

Reduced-order structure-property linkages for stochastic metamaterials

The capabilities of additive manufacturing have facilitated the design and production of mechanical metamaterials with diverse unit cell geometries. Establishing linkages between the vast design space of unit cells and their effective mechanical properties is critical for the efficient design and performance evaluation of such metamaterials. However, physics-based simulations of metamaterial unit cells across the entire design space are computationally expensive, necessitating a materials informatics framework to efficiently capture complex structure-property relationships. In this work, principal component analysis of 2-point correlation functions is performed to extract the salient features from a large dataset of randomly generated 2D metamaterials. Physics-based simulations are performed using a fast Fourier transform (FFT)-based homogenization approach to efficiently compute the homogenized effective elastic stiffness across the extensive unit cell designs. Subsequently, Gaussian process regression is used to generate reduced-order surrogates, mapping unit cell designs to their homogenized effective elastic constant. It is demonstrated that the adopted workflow enables a high-value low-dimensional representation of the voluminous stochastic metamaterial dataset, facilitating the construction of robust structure-property maps. Finally, an uncertainty-based active learning framework is utilized to train a surrogate model with a significantly smaller number of data points compared to the original full dataset. It is shown that a dataset as small as $0.61\%$ of the entire dataset is sufficient to generate accurate and robust structure-property maps.

cs.CE↗

arXiv2024

A Spectral-based Physics-informed Finite Operator Learning for Prediction of Mechanical Behavior of Microstructures

A novel physics-informed operator learning technique based on spectral methods is introduced to model the complex behavior of heterogeneous materials. The Lippmann-Schwinger operator in Fourier space is employed to construct physical constraints with minimal computational overhead, effectively eliminating the need for automatic differentiation. The introduced methodology accelerates the training process by enabling gradient construction on a fixed, finite discretization in Fourier space. Later, the spectral physics-informed finite operator learning (SPiFOL) framework is built based on this discretization and trained to map the arbitrary shape of microstructures to their mechanical responses (strain fields) without relying on labeled data. The training is done by minimizing equilibrium in Fourier space concerning the macroscopic loading condition, which also guarantees the periodicity. SPiFOL, as a physics-informed operator learning method, enables rapid predictions through forward inference after training. To ensure accuracy, we incorporate physical constraints and diversify the training data. However, performance may still degrade for out-of-distribution microstructures. SPiFOL is further enhanced by integrating a Fourier Neural Operator (FNO). Compared to the standard data-driven FNO, SPiFOL shows higher accuracy in predicting stress fields and provides nearly resolution-independent results. Additionally, its zero-shot super-resolution capabilities are explored in heterogeneous domains. Finally, SPiFOL is extended to handle 3D problems and further adapted to finite elasticity, demonstrating the robustness of the framework in handling nonlinear mechanical behavior. The framework shows great potential for efficient and scalable prediction of mechanical responses in complex material systems while also reducing the training time required for training physics-informed neural operators.

cond-mat.mtrl-sci↗

arXiv2024

A two-scale computational homogenization approach for elastoplastic truss-based lattice structures

The revolutionary advancements in metal additive manufacturing have enabled the production of alloy-based lattice structures with complex geometrical features and high resolutions. This has encouraged the development of nonlinear material models, including plasticity, damage, etc., for such materials. However, the prohibitive computational cost arising from the high number of degrees of freedom for engineering structures composed of lattice structures highlights the necessity of homogenization techniques, such as the two-scale computational homogenization method. In the present work, a two-scale homogenization approach with on-the-fly exchange of information is adopted to study the elastoplastic behavior of truss-based lattice structures. The macroscopic homogenized structure is represented by a two-dimensional continuum, while the underlying microscale lattices are modeled as a network of one-dimensional truss elements. This helps to significantly reduce the associated computational cost by reducing the microscopic degrees of freedom. The microscale trusses are assumed to exhibit an elastoplastic material behavior characterized by a combination of nonlinear exponential isotropic hardening and linear kinematic hardening. Through multiple numerical examples, the performance of the adopted homogenization approach is examined by comparing forces and displacements with direct numerical simulations of discrete structures for three types of stretching-dominated lattice topologies, including triangular, X-braced and X-Plus-braced unit cells. Furthermore, the principle of scale separation, which emphasizes the need for an adequate separation between the macroscopic and microscopic characteristic lengths, is investigated.

cs.CE↗

arXiv2024

FFT-based surrogate modeling of auxetic metamaterials with real-time prediction of effective elastic properties and swift inverse design

Auxetic structures, known for their negative Poisson's ratio, exhibit effective elastic properties heavily influenced by their underlying structural geometry and base material properties. While periodic homogenization of auxetic unit cells can be used to investigate these properties, it is computationally expensive and limits design space exploration and inverse analysis. In this paper, surrogate models are developed for the real-time prediction of the effective elastic properties of auxetic unit cells with orthogonal voids of different shapes. The unit cells feature orthogonal voids in four distinct shapes, including rectangular, diamond, oval, and peanut-shaped voids, each characterized by specific void diameters. The generated surrogate models accept geometric parameters and the elastic properties of the base material as inputs to predict the effective elastic constants in real-time. This rapid evaluation enables a practical inverse analysis framework for obtaining the optimal design parameters that yield the desired effective response. The fast Fourier transform (FFT)-based homogenization approach is adopted to efficiently generate data for developing the surrogate models, bypassing concerns about periodic mesh generation and boundary conditions typically associated with the finite element method (FEM). The performance of the generated surrogate models is rigorously examined through a train/test split methodology, a parametric study, and an inverse problem. Finally, a graphical user interface (GUI) is developed, offering real-time prediction of the effective tangent stiffness and performing inverse analysis to determine optimal geometric parameters.

cs.CE↗

arXiv2024

Wrinkling instability of 3D auxetic bilayers in tension

Bilayers, soft substrates coated with stiff films, are commonly found in nature with examples including skin tissue, vesicles, and organ membranes. They exhibit different types of instabilities when subjected to compression, depending on the contrast in material properties between the two components. In this work, we unravel the mechanisms behind wrinkling instabilities in auxetic bilayer systems under uniaxial tension. We find that a soft bilayer in tension can experience significant lateral contraction, and with sufficient contrast in Poisson ratios, compressive stresses may induce wrinkles aligned with the tensile direction. We analytically model the onset of wrinkles and validate our predictions using Finite Element simulations in ABAQUS. Our findings reveal that wrinkles occur when the Poisson ratio of the substrate is greater than that of the film. As the two Poisson ratios converge to a common value, the critical stretch for instability shoots up rapidly and the wrinkles disappear. We also confirm these results through asymptotic analysis. Using inverse analysis, we design film microstructures to achieve desired effective Poisson ratios and further validate the effective properties with the Finite Element code FEAP. We show that the critical stretch ratio for buckling in auxetic structures with microstructural patterns is in strong agreement with the homogenized model predictions. The proposed method has significant potential for controlling surface patterns in auxetic skin grafts and hydrogel organ patches under mechanical loads. Moreover, the asymptotic expressions for compressible bilayers developed in this work can also be applied under finite strain for buckling-based metrology.

cond-mat.mtrl-sci↗