arXiv subjects

Hong-fei Zhang

Publications and source records attributed to Hong-fei Zhang.

13 recordsLinked to original sources

arXiv2025

TTC: Transformer-based TDE Classifier for the Wide Field Survey Telescope (WFST)

We propose the Transformer-based Tidal disruption events (TDE) Classifier (\texttt{TTC}), specifically designed to operate effectively with both real-time alert streams and archival data of the Wide Field Survey Telescope (WFST). It aims to minimize the reliance on external catalogs and find TDE candidates from pure light curves, which is more suitable for finding TDEs in faint and distant galaxies. \texttt{TTC} consists of two key modules that can work independently: (1) A light curve parametric fitting module and (2) a Transformer (\texttt{Mgformer})-based classification network. The training of the latter module and evaluation for each module utilize a light curve dataset of 7413 spectroscopically classified transients from the Zwicky Transient Facility (ZTF). The \texttt{Mgformer}-based module is superior in performance and flexibility. Its representative recall and precision values are 0.79 and 0.76, respectively, and can be modified by adjusting the threshold. It can also efficiently find TDE candidates within 30 days from the first detection. For comparison, the parametric fitting module yields values of 0.72 and 0.40, respectively, while it is $>$10 times faster in average speed. Hence, the setup of modules allows a trade-off between performance and time, as well as precision and recall. \texttt{TTC} has successfully picked out all spectroscopically identified TDEs among ZTF transients in a real-time classification test, and selected $\sim$20 TDE candidates in the deep field survey data of WFST. The discovery rate will greatly increase once the differential database for the wide field survey is ready.

astro-ph.IM↗

arXiv2022

RACS2: A Framework of Remote Autonomous Control System for Telescope Observation and its application

As the demand of astronomical observation rising, the telescope systems are becoming more and more complex. Thus, the observatory control software needs to be more intelligent, they have to control each instrument inside the observatory, finish the observation tasks autonomously, and report the information to users if needed. We developed a distributed autonomous observatory control framework named Remote Autonomous Control System 2nd, RACS2 to meet these requirements. The RACS2 framework uses decentralized distributed architecture, instrument control software and system service such as observation control service are implemented as different components. The communication between components is implemented based on a high-performance serialization library and a light-weighted messaging library.The interfaces towards python and Experimental Physics and Industrial Control System (EPICS) are implemented, so the RACS2 framework can communicate with EPICS based device control software and python-based software. Several system components including log, executor, scheduler and other modules are developed to help observation. Observation tasks can be programmed with python language, and the plans are scheduled by the scheduler component to achieve autonomous observation.A set of web service is implemented based on the FastAPI framework, with which user can control and manage the framework remotely.Based on the RACS2 framework, we have implemented the DATs telescope's observation system and the space object observation system.We performed remote autonomous observation and received many data with these systems.

astro-ph.IM↗

arXiv2018

Design of Near Infrared Sky Brightness Monitor and Test Running at Ngari Observatory in Tibet

Tibet is known as the third pole of the earth, as high as the South Pole and North Pole. The Ngari (Ali) observatory in Tibet has the advantage of plenty of photometric night, low precipitable water vapor, high transmittance, good seeing. It is a good site, and promising to be one of the best place for infrared and submillimeter observations in the world. However, there is no data available for sky background brightness in such place, which restrict the astronomical development of the sites. In the near infrared band of J, H, Ks, a NIR sky brightness monitor (NISBM) is designed based on InGaAs photoelectric diode. By using the method of chopper modulation and digital lock-in amplifier processing, the SNR (Signal Noise Ratio), detectivity and the data acquisition speed of the device is greatly improved. For each band of J, H, Ks, an independent instrument is designed and calibrated in laboratory. The NISBM has been installed in Ngari observatory in July of 2017 and obtained the first data of NIR sky brightness at Ngari observatory.

astro-ph.IM↗

arXiv2018

The operational and control software of Multi-channel Antarctic Solar Telescope

MARST (Multi-channel Antarctic Solar Telescope) aims to observe the Sun in multiple wavebands in Antarctica and will be China's first solar telescope in Antarctica. The telescope has two tubes, corresponding to Photosphere observation which uses 11 filters and Chromosphere observation in H{\alpha} waveband. The two tubes need to be coordinated to observe at the same time. The telescope will observe the Sun for a long time, so a self-guiding module is needed to improve sun tracking. Besides, performing solar specific flat-field exposure is necessary for analyzing. EPICS is introduced to control each hardware and an autonomous observation system based on RTS2 is designed under such demands. EPICS application modules are implemented for each device: telescope mount & focuser, filter wheel, H{\alpha} filter, dome with webcams, Andor CCD and PI CCD. We also integrate EPICS modules into RTS2 framework with an XML format configuration. To control these applications autonomously we have developed a RTS2 executor module where two plan classes are instantiated to control two sets of filters and CCDs, and to ensure only one could control the mount at the same time. Different types of observation plans are designed to describe different series of processes with different priorities. To improve sun tracking, we calculate the centroid of each image to get the offset, then apply the correction to the telescope during observation process. For frontend users, a GUI based on PyQt5 and QML is implemented and connects to rts2-httpd and rts2-proxy modules so that users can control devices, check images and get logs.

astro-ph.IM↗

arXiv2018

Design of remote control software of near infrared Sky Brightness Monitor in Antarctica

The Near-infrared Sky Brightness Monitor (NIRBM) aims to measure the middle infrared sky background in Antarctica. The NIRBM mainly consists of an InGaAs detector, a chopper, a reflector, a cooler and a black body. The reflector can rotate to scan the sky with a field of view ranging from 0{\deg} to 180{\deg}. Electromechanical control and weak signal readout functions are accomplished by the same circuit, whose core chip is a STM32F407VG microcontroller. Considering the environment is harsh for humans in Antarctica, a multi-level remote control software system is designed and implemented. A set of EPICS IOCs are developed to control each hardware module independently via serial port communication with the STM32 microcontroller. The tornado web framework and PyEpics are introduced as a combination where PyEpics is used to monitor or change the EPICS Process Variables, functioning as a client for the EPICS framework. Tornado is responsible for the specific operation process of inter-device collaboration, and expose a set of interfaces to users to make calls. Considering the high delay and low bandwidth of the network environment, the tornado back-end is designed as a master-and-agent architecture to improve domestic user experience. The master node is deployed in Antarctic while multiple agent nodes can be deployed domestic. The master and agent nodes communicate with each other through the WebSocket protocol to exchange latest information so that bandwidth is saved. The GUI is implemented in the form of single-page application based on the Vue framework which communicates with tornado through WebSocket and AJAX requests. The web page integrates device control, data curve drawing, alarm display, auto observation and other functions together.

astro-ph.IM↗

arXiv2018

A Driver ASIC for Scientific CCD Detectors Using 180nm Technology

In order to achieve the driver function for several types of scientific CCD detector from E2V Co Ltd, and decreasing the size of electronics of CCD detector system, an Application-specified Integrated Circuit (ASIC) was designed. It provides multi-channel clocks and bias voltage for CCD driver. In the ASIC, the clock drivers are made of a clock switch circuit and high voltage amplifier. Two 8-bit current-steering DACs are used to adjust the driver capability and high-level voltage of clocks. The bias drivers are generated by 8-bit current-steering DACs and off-chip operation amplifiers. The Global Foundry 180 nm BCDlite technology is selected to implement this design. The first version of design has been finished and the tests have been done.

physics.ins-det↗

arXiv2018

Design of a Non-vacuum-cooling Compact Scientific CCD Camera

CCD was born in Bell Laboratories in 1969 and has been widely used in various fields. Its ultra-low noise and high quantum efficiency make it work well in particle physics, high energy physics, nuclear physics and astrophysics. Nowadays, more and more CCD cameras have been developed for medical diagnosis, scientific experiments, aerospace, military exploration and other fields. For the wide range of CCD cameras, a Non-vacuum-cooling compact (NVCC) scientific CCD camera has been developed, including FPGA-based low noise clock and bias driver circuit, data acquisition circuit, STM32-based temperature control design. At the same time, the readout noise of the imaging system is studied emphatically. The scheme to generate the CCD clock and the bias driving circuit through ultralow noise LDOs is proposed. The camera was tested in a variety of environments, and the test results show that the system can run at a maximum rate of 5M pixels/s and readout noise is as low as 9.29e^- when the CCD readout speed is 500K pixels/s. Finally, a series of stability tests were carried out on the camera system.

physics.ins-det↗

arXiv2018

Design of a general scientific CCD simulation and test system

In this paper, we introduce a general scientific CCD simulation and test system which can meet the test requirements of different types of CCD chips from E2V company, such as measuring different signals output from modules of a CCD controller including power supply, fan, temperature control module, crystal oscillator, shutter and clock-bias generator. Furthermore, the video signal of the CCD detector can be simulated and superimposed with random noise to verify the performance of the video sampling circuit of the CCD controller. The simulation and test system was successful used for the CCD controller which was designed for E2V CCD47-20 detector.

physics.ins-det↗

arXiv2018

Detection of Weak Near-Infrared Signal Based on Digital Orthogonal Vector Lock-in Amplifier

A near-infrared (NIR) measurement based on digital orthogonal vector lock-in amplifier (LIA) is present in this paper. NIR sky background radiation is very weak. To detect the signals obscured by noise, the best way achieved is to use a chopper to modulate the detected signal and using a LIA to demodulate. The effect of 1/f noise of detector, dark current and other noises can be reduced to get sufficient signal-to-noise ratio (SNR). The orthogonal vector LIA can avoid the phase shift on the accuracy of measurement by two orthogonal components. In order to simplify the system, a digital algorithm is adopted to realize the LIA which is operated in a microcontroller with ARM cortex-M4. Data is obtained through ADC and the signal of detector is amplified and filtered. Then the phase sensitive detection (PSD), low-pass filter (LPF) and amplitude phase calculation are performed. The digital method can greatly simplify the circuit, and conveniently adjust the time constant of the LPF to realize the different equivalent noise bandwidth (ENB). The algorithm has the specification of high precision, flexible usage, simple implementation and low computation resource. By using this method, the weak infrared signal submerged by the noise can be obtained, which extremely improves the detection capability of the system.

astro-ph.IM↗

arXiv2016

$\bar{K}$ -induced formation of the $f_2(1270)$ and $f_2^{'}(1525)$ resonances on proton targets

We investigate the productiong of $f_2(1270)$ and $f_2^{'}(1525)$ mesons in the $K^{-}p\to\Lambda{}f_2(1270)$,$K^{-}p\to\Lambda{}f^{'}_2(1525)$ and $K^{-}p\to{}K^{+}K^{-}\Lambda$ reactions within an effective Lagrangian approach. For $K^{-}p\to{}f_2\Lambda$ reaction, by considering the contributions from the $t$-channel $K^{+}$ exchange and $u$-channel nucleon pole, we get a fairly good description of the experimental measurements about the total and differential cross sections. Based on the studies of the $K^{-}p\to{}f_2\Lambda$ reaction, we investigate $K^{-}p\to{}K^{+}K^{-}\Lambda$ reaction including the contributions from the $f_2(1270)$ and $f'_2(1525)$ mesons decaying into $K^+K^-$ pair. The total cross sections and invariant mass distribution of the $K p \to K^+K^- \Lambda$ reaction are predicted. The results can be tested in future experiments and therefore offer new clues on the nature of these tensor states.

hep-ph↗

arXiv2014

A bias-free quantum random number generation using photon arrival time selectively

We present a high-quality, bias-free quantum random number generator (QRNG) using photon arrival time selectively in accordance with the number of photon detection events within a sampling time interval in attenuated light. It is well showed in both theoretical analysis and experiments verification that this random number production method eliminates both bias and correlation perfectly without more post processing and the random number can clearly pass the standard randomness tests. We fulfill theoretical analysis and experimental verification of the method whose rate can reach up to 45Mbps.

quant-ph↗

arXiv2013

A real-time QKD system based on FPGA

A real-time Quantum Key Distribution System is developed in this paper. In the system, based on the feature of Field Programmable Gate Array (FPGA), secure key extraction control and algorithm have been optimally designed to perform sifting, error correction and privacy amplification altogether in real-time. In the QKD experiment information synchronization mechanism and high-speed classic data channel are designed to ensure the steady operation of the system. Decoy state and synchronous laser light source are used in the system, while the length of optical fiber between Alice and Bob is 20 km. With photons repetition frequency of 20 MHz, the final key rate could reach 17 kbps. Smooth and robust operation is verified with 6-hour continuous test and associated with encrypted voice communication test.

quant-ph↗

arXiv2013

A real-time design based on FPGA for Expeditious Error Reconciliation in QKD system

For high-speed quantum key distribution systems, error reconciliation is often the bottleneck affecting system performance. By exchanging common information through a public channel, the identical key can be generated on both communicating sides. However, the necessity to eliminate disclosed bits for security reasons lowers the final key rate. To improve this key rate, the amount of disclosed bits should be minimized. In addition, decreasing the time spent on error reconciliation also improves the key rate. In this paper we introduce a practical method for expeditious error reconciliation implemented in a Field Programmable Gate Array for a discrete variable quantum key distribution system, and illustrate the superiority of this method to other similar algorithms running on a PC. Experimental results demonstrate the rapidity of the proposed protocol.

quant-ph↗