arXiv ScienceSearch

arXiv subjects

Hitoshi Hayano

Publications and source records attributed to Hitoshi Hayano.

6 recordsLinked to original sources

Two-stage Convolutional Neural Network for pseudo six-dimensional phase space reconstruction

In particle accelerators, broad characterization of the six-dimensional (6D) beam phase space is crucial but difficult to obtain with conventional beam diagnostics. We develop a two-stage convolutional neural network (CNN) that reconstructs the 6D phase space from only sixteen transverse $x-y$ screen images taken at a place with dispersion by different phase space rotation angles. The model is trained with simulation data of KEK-Accelerator Test Facility (ATF) injector with ASTRA. The real-space images in the chicane orbit at the KEK-ATF injector were acquired by varying the RF phase of the RF electron gun and the solenoid magnetic field. From these data, we reconstructed a pseudo 6D phase space distribution at the cathode surface, expressed through 15 two-dimensional (2D) distributions covering all pairwise coordinate combinations. The time width and spatial spread of the electron beam at the cathode showed values consistent with the measured values at KEK-ATF. Compared to existing 6D beam imaging measurement techniques such as tomography, it significantly reduces measurement time and required computational resources, enabling the provision of a more practical 6D phase space measurement method.

hep-ex

Lower Critical Field Measurement System based on Third-Harmonic Method for Superconducting RF Materials

We develop a lower critical field (Hc1) measurement system using the third-harmonic response of an applied AC magnetic field from a solenoid coil positioned above a superconducting sample. Parameter Hc1 is measured via detection of the third-harmonic component, which drastically changes when a vortex begins to penetrate the superconductor with temperature increase. The magnetic field locally applied to one side of the sample mimics the magnetic field within superconducting radio-frequency (SRF) cavities and prevents edge effects of the superconducting sample. With this approach, our measurement system can potentially characterize surface-engineered SRF materials such as Superconductor-Insulator-Superconductor multilayer structure (S-I-S structure). As a validation test, we measure the temperature dependence of Hc1 of two high-RRR bulk Nb samples and obtain results consistent with the literature. We also confirm that our system can apply magnetic fields of at least 120 mT at 4-5 K without any problem of heat generation of the coil. This field value is higher than those reported in previous works and makes it possible to more accurately estimate Hc1 at lower temperatures.

physics.acc-ph

The International Linear Collider Technical Design Report - Volume 3.II: Accelerator Baseline Design

The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe.

physics.acc-ph

The International Linear Collider Technical Design Report - Volume 3.I: Accelerator R&D in the Technical Design Phase

The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe.

physics.acc-ph

A Survey of Pressure Vessel Code Compliance for Superconducting RF Cryomodules

Superconducting radio frequency (SRF) cavities made from niobium and cooled with liquid helium are becoming key components of many particle accelerators. The helium vessels surrounding the RF cavities, portions of the niobium cavities themselves, and also possibly the vacuum vessels containing these assemblies, generally fall under the scope of local and national pressure vessel codes. In the U.S., Department of Energy rules require national laboratories to follow national consensus pressure vessel standards or to show "a level of safety greater than or equal to" that of the applicable standard. Thus, while used for its superconducting properties, niobium ends up being treated as a low-temperature pressure vessel material. Niobium material is not a code listed material and therefore requires the designer to understand the mechanical properties for material used in each pressure vessel fabrication; compliance with pressure vessel codes therefore becomes a problem. This report summarizes the approaches that various institutions have taken in order to bring superconducting RF cryomodules into compliance with pressure vessel codes.

physics.acc-ph

New 357 MHz Sub Harmonic Buncher

KEK-ATF is doing R&D establishing high-current and low-emittance electron beam for the future linear colliders. In ATF, 15 ps length electron beam is generated by combination of a thermionic gun, a couple of 357 MHz SHBs, and a S-band TW buncher. In the linac, beam instability caused by the fluctuated amplitude and phase of SHBs has been observed. The reason of the fluctuation is considered to be the multi-pacting in the SHB cavity. In addition, Q value of the cavity is almost half of the designed value, then SHBs are not operated in an optimum condition. We have fabricated new SHBs with considerations avoiding the multi-pacting and recovering Q value. A simulation shows that bunching quality is improved with the new SHB cavity.

physics.acc-ph