arXiv subjects

Hiroyuki Takizawa

Publications and source records attributed to Hiroyuki Takizawa.

8 recordsLinked to original sources

arXiv2026

A Smallest-Need-First Job Scheduling Framework with Adaptive Optimization of Idle Node Counts for Energy-Efficient HPC Systems

Power-state management in high-performance computing (HPC) clusters must reduce idle energy without excessive wake-up delays for rigid parallel jobs. This paper presents SNF-ICON, an event-driven controller combining smallest-need-first (SNF) gang scheduling, predictive wake timing, and adaptive warm-spare control. At each scheduler invocation, recent interarrival and completed-service samples are screened for sufficiency, exponential-like variability, low lag-one autocorrelation, and acceptable Kolmogorov-Smirnov distance. Rejected or data-sparse windows use SNF+IPM (Intelligent Power Manager), whereas accepted windows activate release prediction and an exponential next-event model. Warm-spare optimization is applied only when queue, event, and arrival-recency conditions permit, balancing estimated waiting and non-compute energy over a timeout-capped horizon. We evaluate four DAS2 trace segments and a generated Markovian workload on AOBA-derived 64-node models, plus SDSC Blue on an AOBA-derived 1152-node model. SNF-ICON is compared with SNF+IPM and First Come First Served (FCFS) + backfilling with IPM. It reduces average waiting time relative to the FCFS-based baseline in all six cases and remains close to at least one heuristic energy baseline in five. The generated workload spends substantial time in ICON mode, whereas DAS2 workloads operate mainly in fallback. Furthermore, cross-platform results show strong dependence on node-transition and power models. Thus, no single policy or parameter set works best in every case.

cs.DC↗

arXiv2025

SPARS: A Reinforcement Learning-Enabled Simulator for Power Management in HPC Job Scheduling

High-performance computing (HPC) systems consume enormous amounts of energy, with idle nodes as a major source of energy waste. Powering down idle nodes can mitigate this problem, but long boot/shutdown delays can introduce significant queueing penalties if transitions are poorly timed. To address this trade-off, we present SPARS, a reinforcement learning-enabled simulator for power management in HPC job scheduling. SPARS integrates job scheduling and node power-state management within a discrete-event simulation framework. It supports traditional scheduling policies such as First Come First Serve and EASY Backfilling, along with enhanced variants that employ reinforcement learning agents to dynamically decide when nodes should be powered on or off. Users can configure workloads and platforms in JSON format, specifying job arrivals, execution times, node power models, and transition delays. The simulator records comprehensive metrics-including energy usage, wasted power, job waiting times, and node utilization-and provides Gantt chart visualizations to analyze scheduling dynamics and power transitions. Unlike widely used Batsim-based frameworks that rely on heavy inter-process communication, SPARS provides lightweight event handling and consistent simulation results, making experiments easier to reproduce and extend. Its modular design allows new scheduling heuristics or learning algorithms to be integrated with minimal effort. By providing a flexible, reproducible, and extensible platform, SPARS enables researchers and practitioners to systematically evaluate power-aware scheduling strategies, explore the trade-offs between energy efficiency and performance, and accelerate the development of sustainable HPC operations.

cs.DC↗

arXiv2025

Improving the Efficiency of a Deep Reinforcement Learning-Based Power Management System for HPC Clusters Using Curriculum Learning

High energy consumption remains a key challenge in high-performance computing (HPC) systems, which often feature hundreds or thousands of nodes drawing substantial power even in idle or standby modes. Although powering down unused nodes can improve energy efficiency, choosing the wrong time to do so can degrade quality of service by delaying job execution. Machine learning, in particular reinforcement learning (RL), has shown promise in determining optimal times to switch nodes on or off. In this study, we enhance the performance of a deep reinforcement learning (DRL) agent for HPC power management by integrating curriculum learning (CL), a training approach that introduces tasks with gradually increasing difficulty. Using the Batsim-py simulation framework, we compare the proposed CL-based agent to both a baseline DRL method (without CL) and the conventional fixed-time timeout strategy. Experimental results confirm that an easy-to-hard curriculum outperforms other training orders in terms of reducing wasted energy usage. The best agent achieves a 3.73% energy reduction over the baseline DRL method and a 4.66% improvement compared to the best timeout configuration (shutdown every 15 minutes of idle time). In addition, it reduces average job waiting time by 9.24% and maintains a higher job-filling rate, indicating more effective resource utilization. Sensitivity tests across various switch-on durations, power levels, and cluster sizes further reveal the agent's adaptability to changing system parameters without retraining. These findings demonstrate that curriculum learning can significantly improve DRL-based power management in HPC, balancing energy savings, quality of service, and robustness to diverse configurations.

cs.DC↗

arXiv2024

Efficient Classical Computation of Single-Qubit Marginal Measurement Probabilities to Simulate Certain Classes of Quantum Algorithms

Classical simulations of quantum circuits are essential for verifying and benchmarking quantum algorithms, particularly for large circuits, where computational demands increase exponentially with the number of qubits. Among available methods, the classical simulation of quantum circuits inspired by density functional theory -- the so-called QC-DFT method, shows promise for large circuit simulations as it approximates the quantum circuits using single-qubit reduced density matrices to model multi-qubit systems. However, the QC-DFT method performs very poorly when dealing with multi-qubit gates. In this work, we introduce a novel CNOT "functional" that leverages neural networks to generate unitary transformations, effectively mitigating the simulation errors observed in the original QC-DFT method. For random circuit simulations, our modified QC-DFT enables efficient computation of single-qubit marginal measurement probabilities, or single-qubit probability (SQPs), and achieves lower SQP errors and higher fidelities than the original QC-DFT method. Despite some limitations in capturing full entanglement and joint probability distributions, we find potential applications of SQPs in simulating Shor's and Grover's algorithms for specific solution classes. These findings advance the capabilities of classical simulations for some quantum problems and provide insights into managing entanglement and gate errors in practical quantum computing.

quant-ph↗

arXiv2024

Leveraging Hardware Performance Counters for Predicting Workload Interference in Vector Supercomputers

In the rapidly evolving domain of high-performance computing (HPC), heterogeneous architectures such as the SX-Aurora TSUBASA (SX-AT) system architecture, which integrate diverse processor types, present both opportunities and challenges for optimizing resource utilization. This paper investigates workload interference within an SX-AT system, with a specific focus on resource contention between Vector Hosts (VHs) and Vector Engines (VEs). Through comprehensive empirical analysis, the study identifies key factors contributing to performance degradation, such as cache and memory bandwidth contention, when jobs with varying computational demands share resources. To address these issues, we develop a predictive model that leverages hardware performance counters (HCs) and machine learning (ML) algorithms to classify and predict workload interference. Our results demonstrate that the model accurately forecasts performance degradation, offering valuable insights for future research on optimizing job scheduling and resource allocation. This approach highlights the importance of adaptive resource management strategies in maintaining system efficiency and provides a foundation for future enhancements in heterogeneous supercomputing environments.

cs.DC↗

arXiv2024

Modernizing an Operational Real-time Tsunami Simulator to Support Diverse Hardware Platforms

To issue early warnings and rapidly initiate disaster responses after tsunami damage, various tsunami inundation forecast systems have been deployed worldwide. Japan's Cabinet Office operates a forecast system that utilizes supercomputers to perform tsunami propagation and inundation simulation in real time. Although this real-time approach is able to produce significantly more accurate forecasts than the conventional database-driven approach, its wider adoption was hindered because it was specifically developed for vector supercomputers. In this paper, we migrate the simulation code to modern CPUs and GPUs in a minimally invasive manner to reduce the testing and maintenance costs. A directive-based approach is employed to retain the structure of the original code while achieving performance portability, and hardware-specific optimizations including load balance improvement for GPUs are applied. The migrated code runs efficiently on recent CPUs, GPUs and vector processors: a six-hour tsunami simulation using over 47 million cells completes in less than 2.5 minutes on 32 Intel Sapphire Rapids CPUs and 1.5 minutes on 32 NVIDIA H100 GPUs. These results demonstrate that the code enables broader access to accurate tsunami inundation forecasts.

cs.DC↗

arXiv2023

Performance Evaluation of a Next-Generation SX-Aurora TSUBASA Vector Supercomputer

Data movement is a key bottleneck in terms of both performance and energy efficiency in modern HPC systems. The NEC SX-series supercomputers have a long history of accelerating memory-intensive HPC applications by providing sufficient memory bandwidth to applications. In this paper, we analyze the performance of a prototype SX-Aurora TSUBASA supercomputer equipped with the brand-new Vector Engine (VE30) processor. VE30 is the first major update to the Vector Engine processor series, and offers significantly improved memory access performance due to its renewed memory subsystem. Moreover, it introduces new instructions and incorporates architectural advancements tailored for accelerating memory-intensive applications. Using standard benchmarks, we demonstrate that VE30 considerably outperforms other processors in both performance and efficiency of memory-intensive applications. We also evaluate VE30 using applications including SPEChpc, and show that VE30 can run real-world applications with high performance. Finally, we discuss performance tuning techniques to obtain maximum performance from VE30.

cs.DC↗

arXiv2022

mdx: A Cloud Platform for Supporting Data Science and Cross-Disciplinary Research Collaborations

The growing amount of data and advances in data science have created a need for a new kind of cloud platform that provides users with flexibility, strong security, and the ability to couple with supercomputers and edge devices through high-performance networks. We have built such a nation-wide cloud platform, called "mdx" to meet this need. The mdx platform's virtualization service, jointly operated by 9 national universities and 2 national research institutes in Japan, launched in 2021, and more features are in development. Currently mdx is used by researchers in a wide variety of domains, including materials informatics, geo-spatial information science, life science, astronomical science, economics, social science, and computer science. This paper provides an the overview of the mdx platform, details the motivation for its development, reports its current status, and outlines its future plans.

cs.LG↗