arXiv subjects

Hiroshi Abe

Publications and source records attributed to Hiroshi Abe.

At least 19 recordsLinked to original sources

arXiv2026

Persistence and emergence of quantum defects through pressure-induced phase changes

Extreme pressures can transform materials and their properties, but probing these in-situ is made challenging by the small sample volumes and access requirements demanded by diamond anvil cells. Quantum defects offer a route to local measurements under such conditions, yet their sensing performance can be dictated by pressure-induced changes in their own host material. On the other hand, pressure may also be harnessed as a tool to engineer and stabilize new quantum defects with emergent functionalities. Here, we demonstrate both aspects within a unified platform based on optically active spin-pair defects in hexagonal boron nitride (hBN). As robust quantum sensors under pressure, these spin-1/2 systems retain pressure-independent spin resonances up to 20 GPa while maintaining or even enhancing their optical emission, in stark contrast to the spin-1 boron-vacancy centre in the same material. Simultaneously, we show that compression acts as a means of quantum defect engineering: the starting hBN undergoes an irreversible transformation into wurtzite boron nitride (wBN), during which the defect landscape is reconfigured. Spin-pair sensors are seen to persist across this structural transition, however, depending on the starting material we also observe new, highly fluorescent defects in the wBN phase. These results establish spin-pair defects in boron nitride as pressure-resilient quantum sensors while highlighting high pressure itself as a versatile pathway for creating and tuning quantum emitters.

cond-mat.mes-hall↗

arXiv2026

A robust laser cavity platform for NV-diamond singlet infrared absorption magnetometry

The negatively charged nitrogen-vacancy center (NV$^-$) in diamond is a versatile platform for quantum magnetometry under ambient conditions. Recently, laser threshold magnetometry (LTM) has been proposed as a means to significantly enhance the sensitivity of NV-based magnetometers by incorporating a diamond hosting NV$^-$ centers within a laser cavity and operating near threshold. While demonstrations have validated the concept, practical implementations remain technically demanding, requiring high pump powers and precise alignment of free-space cavities. It remains unclear whether the benefits of operating near threshold will outpace increased laser noise. In this work, we integrate an NV-diamond with a high NV$^-$ content into a compact external cavity diode laser and demonstrate singlet infrared absorption optically detected magnetic resonance (ODMR). The system exhibits exceptional threshold current stability, enabling ODMR using the threshold current as the read-out parameter. We report a five-fold enhancement in the ODMR contrast by operating near threshold. The best magnetic field sensitivity of $7.6~\mathrm{nT/\sqrt{Hz}}$ (DC-500 Hz) is achieved well above threshold, while near threshold sensitivity is limited by increased probe laser noise. These results establish a compact and mechanically robust platform for singlet absorption-based NV$^-$ magnetometry and highlight key trade-offs between contrast enhancement and laser noise near threshold.

quant-ph↗

arXiv2026

A Highly Sensitive Diamond NV Magnetometer Using Ramsey Interferometry with a Short Sensor-to-Sample Distance

In this study, we developed a diamond quantum magnetometer based on Ramsey interferometry with a short sensor-to-sample distance. Conventional biomagnetic sensors with ensemble nitrogen-vacancy centers using continuous-wave optically detected magnetic resonance and Ramsey methods typically rely on watt-level lasers to achieve high sensitivity, resulting in thermal issues. In contrast, by employing the light-trapping diamond waveguide technique in a high-pressure and high-temperature diamond sample treated with electron beam irradiation, we obtained a high photon conversion efficiency of 9.5%, enabling us to simultaneously achieve a high sensitivity of 2.93(7) pT/Hz^1/2 in the 100-400 Hz frequency range and a minimal temperature increase of only approximately 13 K at a low laser power of 210 mW. Using a dry phantom designed to mimic magnetoencephalography signals, we measured a weak magnetic field of 77.7(2) pT without signal averaging at a sensor-to-sample distance of 2.5 mm. This short-distance measurement prevents severe spatial signal attenuation, yielding a high signal-to-noise ratio. The development here is crucial for practical biomagnetic applications based on Ramsey interferometry.

quant-ph↗

arXiv2026

Ion Concentration and Voltage Imaging with Fluorescent Nanodiamonds

The nitrogen-vacancy (NV) center in diamond exists in different charge states with distinct photoluminescence properties, which are sensitive to the nanoscale electrochemical environment. Hence, the NV charge state is emerging as a powerful all-optical platform for nanoscale sensing and imaging. Although significant progress has been made in engineering near-surface NV centers in bulk diamond, controlling the NV charge state in fluorescent nanodiamonds (FNDs) has proven challenging, limiting the sensitivity and reliability of FND-based charge state sensing. Here, we demonstrate reliable, reversible switching between the fluorescent NV$^0$ and non-fluorescent NV$^+$ charge states in sub-30 nm FNDs via surface oxidation and hydrogenation, respectively, for single particles and particle powder. In aqueous electrochemical cells, we demonstrate voltage and ion concentration imaging based on the NV charge state in self-assembled FND layers on transparent substrates. Applied voltages reliably modulate the FND PL with a sensitivity of up to 16 mV Hz$^{-1/2}$. Importantly, FND PL is also modulated by local changes in salt concentration with a sensitivity of up to 1.8% per millimolar NaCl, enabling all-optical imaging of ion concentration gradients at the microscale. Our results represent a significant step toward realizing fast, stable, and scalable nanoscale charge- and voltage-imaging technologies with sub-micrometer spatial resolution.

cond-mat.mes-hall↗

arXiv2026

Spectator-transition crosstalk in a spin-3/2 silicon vacancy qudit in silicon carbide revealed by broadband Ramsey interferometry

Color center spins in 4H-SiC offer a rare combination of wafer-scale materials maturity with long spin coherence and chip-level photonics, making them promising building blocks for scalable quantum technologies. In particular, the silicon vacancy hosts an S=3/2 ground state, a native qudit that enables compact encodings and subspace-selective control, but also introduces spectator transitions: short, detuned pulses can coherently drive non-addressed level pairs and create crosstalk. Here we use broadband Ramsey interferometry to reveal and quantify such spectator-transition crosstalk. Experimentally, the Ramsey Fourier spectra display multiple lines beyond the addressed single-quantum transition. Analytically, we map each line to a pairwise energy difference between qudit levels of the rotating-frame Hamiltonian and assign its weight via compact amplitudes set by the prepared state and the microwave pulse parameters, predicting a deterministic six-branch structure. Numerical time-domain propagation with the experimental sampling reproduces the detuning map, and the measured peak positions coincide with the analytic branch lines without frequency fitting. Together these results provide a practical, spectator-aware framework for multilevel control in the silicon vacancy qudit. The approach offers clear guidance to suppress crosstalk or, conversely, to exploit spectator lines, for example as additional constraints for in situ pulse calibration and for phase-sensitive quantum state and process estimation.

quant-ph↗

arXiv2025

Photoelectrical detection and characterization of divacancy and PL5-PL7 spins in silicon carbide

Photoelectrical detection of magnetic resonance (PDMR) offers a scalable alternative to optical readout of spin defects in semiconductors and is particularly promising for near-infrared (NIR) emitters, where photodetection is often challenging. Here, we demonstrate room-temperature coherent PDMR of PL3 (divacancy), PL5, PL6, and PL7 spins. PL7 and PL5 exhibit notably stronger PDMR than PL6 as opposed to optical detection, indicating higher ionization efficiency and suitability for electrical readout. Rabi oscillation and two-frequency spectroscopy reveal a previously undiscovered secondary resonance of PL7. We determine the zero-field splitting parameters of PL7 and assign the recently reported PL3a defect to PL7. The demonstrated PDMR of these NIR defects constitutes a key advancement toward quantum electronic devices. Also, the clarified spin parameters and ionization characteristics provide a solid foundation for advancing quantum technologies utilizing these defects regardless of the detection schemes.

quant-ph↗

arXiv2025

Photoionization current spectroscopy of individual silicon vacancies in silicon carbide

Defect charge-state dynamics are central to both spin-photon interfaces and photoelectrical spin readout. Despite the significance of silicon vacancies (V1/V2) in silicon carbide (4H-SiC) for both applications, their ionization behavior has remained unclear because their lack of optical blinking prevents conventional charge-state analysis. Here, we employ photocurrent spectroscopy of individual defects to measure the wavelength dependence of their excitation and ionization cross-sections. We reveal that V1 and V2 exhibit similar ionization cross-sections that increase toward shorter wavelengths, while carbon vacancies dominate the more steeply increasing background photocurrent. These results indicate that V2 and its surrounding environment appear more robust than V1 under resonant excitation. We also identify wavelength regimes that optimize defect-origin photocurrent for photoelectrical spin readout relative to background contributions, which differ between single-defect and ensemble measurements. Our results establish photocurrent spectroscopy as a powerful complement to optical methods, advancing the development of defect-based quantum devices.

cond-mat.mes-hall↗

arXiv2025

Multichannel highly sensitive diamond quantum magnetometer

We demonstrate a highly sensitive real-time magnetometry method at two measurement points. This magnetometry method is based on the frequency-division multiplexing of continuous-wave optically detected magnetic resonance. We use two ensembles of nitrogen-vacancy (NV) centers separated by 3.6 mm to measure a magnetic field. A different bias field is applied to the two NV ensembles to resolve the resonance peak for each ensemble in the frequency space and enables the multiplexed magnetometry at the two points. The sensitivities achieved at the measurement points are $21~\mathrm{pT/\sqrt{Hz}}$ and $22~\mathrm{pT/\sqrt{Hz}}$. The proposed magnetometry method can be expanded to include more measurement points and shorter spacing. The capability of real-time measurement at numerous points with short spacing and high sensitivity is beneficial for various applications, including biomagnetic sensing, geophysical research, and material science.

quant-ph↗

arXiv2025

Coupling 4H-Silicon Carbide spins to a microwave resonator at milli-Kelvin temperature

Coupling microwave cavity modes with spin qubit transitions is crucial for enabling efficient qubit readout and control, long-distance qubit coupling, quantum memory implementation, and entanglement generation. We experimentally observe the coupling of different spin qubit transitions in Silicon Carbide (SiC) material to a 3D microwave (MW resonator mode around 12.6~GHz at a temperature of 10~mK. Tuning the spin resonances across the cavity resonance via magnetic-field sweeps, we perform MW cavity transmission measurements. We observe spin transitions of different spin defects that are detuned from each other by around 60-70~MHz. By optically exciting the SiC sample placed in the MW cavity with an 810~nm laser, we observe the coupling of an additional spin resonance to the MW cavity, also detuned by around 60-70 MHz from the centre resonance. We perform complementary confocal optical spectroscopy as a function of temperature from 4~K to 200~K. Combining the confocal spectroscopy results and a detailed analysis of the MW-resonator-based experiments, we attribute the spin resonances to three different paramagnetic defects: positively-charged carbon antisite vacancy pair (CAV$^+$), and the negatively-charged silicon vacancy spins located at two different lattice sites, namely V$_1$ and V$_2$ spins. The V$_1$ and V$_2$ lines in SiC are interesting qubit transitions since they are known to be robust to decoherence. Additionally, the CAV$^+$-transition is known to be a bright single-photon source. Consequently, the demonstration of the joint coupling of these spin qubits to a MW cavity mode could lead to interesting new modalities: The microwave cavity could act as an information bus and mediate long-range coupling between the spins, with potential applications in quantum computing and quantum communication, which is an attractive proposition in a CMOS-compatible material such as SiC.

quant-ph↗

arXiv2025

The properties of the nitrogen-vacancy center in milled chemical vapor deposition nanodiamonds

Fluorescent nanodiamonds (FNDs) containing negatively charged nitrogen-vacancy (NV-) centers are vital for many emerging quantum sensing applications from magnetometry to intracellular sensing in biology. However, developing a scalable fabrication method for FNDs hosting color centers with consistent bulk-like photoluminescence (PL) and spin coherence properties remains a highly desired but unrealized goal. Here, we investigate optimized ball milling of single-crystal diamonds produced via chemical vapor deposition (CVD) and containing 2 ppm of substitutional nitrogen and 0.3 ppm of NV- to achieve this goal. The NV charge state, PL lifetime, and spin properties of bulk CVD diamond samples are directly compared to milled CVD FNDs and commercial high-pressure high-temperature (HPHT) FNDs. We find that on average, the relative contribution of the NV- charge state to the total NV PL is lower and the NV PL lifetime is longer in CVD FNDs compared to HPHT FNDs, both likely due to the lower Ns0 concentration in CVD FNDs. The CVD bulk and CVD FNDs on average show similar average T1 spin relaxation times of 3.2 $\pm$ 0.7 ms and 4.7 $\pm$ 1.6 ms, respectively, compared to 0.17 $\pm$ 0.01 ms for commercial HPHT FNDs. Our results demonstrate that ball milling of CVD diamonds enables the large-scale fabrication of NV ensembles in FNDs with bulk-like T1 spin relaxation properties.

cond-mat.mes-hall↗

arXiv2025

Current comparator for both AC and DC ratio measurements with 10-8-level accuracy

Accurate measurements of alternating current (AC) and direct current(DC) ratios are fundamental to electric power metrology. However, conventional current comparators for AC and DC typically rely on distinct technologies-electromagnetic induction for AC and superconducting quantum interference devices for DC. This technological divide leads to a fragmented and complex traceability system. Bridging this gap is critical for developing unified current standards that meet the demands of emerging power technologies. In this work, we present a compact, room-temperature AC/DC current comparator that integrates a diamond-based magnetometer using nitrogen-vacancy centers. The device achieves an accuracy of 10-8 for both AC and DC signals and supports a system bandwidth up to 300 Hz, without the need for cryogenics. It surpasses the performance of typical AC comparators, offering ten-fold higher accuracy, and matches that of state-of-the-art DC comparators. This unified, cryogenics-free solution not only enhances precision and versatility but also expands the applicability of the system to DC resistance bridges in quantum electrical standards.

quant-ph↗

arXiv2025

Self-assembled fluorescent nanodiamond layers for quantum imaging

The nitrogen-vacancy (NV) center in diamond is emerging as a powerful tool for imaging magnetic and electric signals at the microscale and below. However, most imaging demonstrations thus far have relied on costly, millimeter-sized bulk diamond substrates, which cannot be easily scaled or integrated with other materials. Here, we report a scalable method for fabricating NV-containing dense and homogenous fluorescent nanodiamond (FND) layers through electrostatic self-assembly and demonstrate the utility of the FND layers for magnetic imaging. We investigate the effect of FND concentration in suspension, substrate immersion time, and solvent pH on the FND density on the substrate. We identify optimized self-assembly conditions that maximize the FND density while minimizing aggregation. Using FND layers on a quartz substrate, we demonstrate magnetic field and magnetic noise imaging at the microscale, based on NV optically detected magnetic resonance magnetometry and T$_1$ relaxometry, respectively. Our results provide a direction for the development of cost-effective and scalable FND layers and surface coatings. This paves the way for on-demand quantum sensing and imaging on a broad range of surfaces based on NV centers and other diamond quantum emitters.

cond-mat.mes-hall↗

arXiv2025

Nitrogen-vacancy centre formation via local femto-second laser annealing of diamond

Emerging quantum technologies based on the nitrogen-vacancy (NV) centre in diamond require carefully engineered material with controlled defect density, optimised NV formation processes, and minimal crystal strain. The choice of NV generation technique plays a crucial role in determining the quality and performance of these centres. In this work, we investigate NV centre formation in nitrogen-doped diamond using femtosecond (fs) laser processing. We systematically examine the effect of laser pulse energy on NV production and quality using photoluminescence and optically detected magnetic resonance measurements. We also probe the role of pre-existing lattice defects formed by electron irradiation and consider defect evolution over extended dwell times. Finally, we are able to identify a regime where the main action of the fs-laser is to diffuse rather than create vacancies. This local annealing capability expands the toolkit for tailored NV production and presents opportunities for fine tuning defect populations.

cond-mat.mtrl-sci↗

arXiv2025

Broadband Fourier transform spectroscopy of quantum emitters photoluminescence with sub-nanosecond temporal resolution

The spectral characterization of quantum emitter luminescence over broad wavelength ranges and fast timescales is important for applications ranging from biophysics to quantum technologies. Here we present the application of time-domain Fourier transform spectroscopy, based on a compact and stable birefringent interferometer coupled to low-dark-count superconducting single-photon detectors, to the study of quantum emitters. We experimentally demonstrate that the system enables spectroscopy of quantum emitters over a broad wavelength interval from the near-infrared to the telecom range, where grating-based spectrometers coupled to InGaAs cameras are typically noisy and inefficient. We further show that the high temporal resolution of single-photon detectors, which can be on the order of tens of picoseconds, enables the monitoring of spin-dependent spectral changes on sub-nanosecond timescales.

quant-ph↗

arXiv2025

Minute-long quantum coherence enabled by electrical depletion of magnetic noise

Integrating solid-state spin defects into classical electronic devices can enable new opportunities for quantum information processing that benefit from existing semiconductor technology. Here, we investigate the impact of bias control of an isotopically purified silicon carbide (SiC) p-i-n diode on the coherence of embedded spins. We show that the diode allows for the depletion of not only the electrical, but also the magnetic noise sources. This results in extended relaxation and coherence times of individual electronic and nuclear spins, with Hahn echo times exceeding values reported for single spins in any platform (> 100 seconds). These results demonstrate the importance of materials control and electronic device integration to create highly coherent solid-state quantum technology.

quant-ph↗

arXiv2025

Mesoscopic cavity quantum electrodynamics with phase-disordered emitters in a Kerr nonlinear resonator

The field of cavity quantum electrodynamics (QED) has seen a recent resurgence of interest in few- and many-body physics owing to the realization that the breaking of symmetries and the presence of disorder can give rise to entirely new phenomena. Here we demonstrate a few-emitter cavity QED system capable of realizing new Hamiltonians in quantum optics based on breaking of symmetries and the realization of an in situ Kerr nonlinearity. Our experiment relies on a high-finesse silicon carbide whispering gallery mode resonator hosting an ensemble of silicon vacancy color centers. The simultaneous presence of spectral and spatial disorder of the mesoscopic atom system gives rise to emergent chirality, and the optical nonlinearity of the silicon carbide host crystal enables the observation of atom-photon correlations induced by a four-photon nonlinear process. This work demonstrates the potential for solid state defect systems to realize emerging proposals and to study fundamental physics in quantum electrodynamics.

quant-ph↗

arXiv2024

Performance Evaluation of a Diamond Quantum Magnetometer for Biomagnetic Sensing: A Phantom Study

We employ a dry-type phantom to evaluate the performance of a diamond quantum magnetometer with a high sensitivity of about $6~\mathrm{pT/\sqrt{Hz}}$ from the viewpoint of practical measurement in biomagnetic sensing. The dry phantom is supposed to represent an equivalent current dipole (ECD) generated by brain activity, emulating an encephalomagnetic field. The spatial resolution of the magnetometer is evaluated to be sufficiently higher than the length of the variation in the encephalomagnetic field distribution. The minimum detectable ECD moment is evaluated to be 0.2 nA m by averaging about 8000 measurements for a standoff distance of 2.4 mm from the ECD. We also discuss the feasibility of detecting an ECD in the measurement of an encephalomagnetic field in humans. We conclude that it is feasible to detect an encephalomagnetic field from a shallow cortex area such as the primary somatosensory cortex.

physics.ins-det↗

arXiv2024

Violet to near-infrared optical addressing of spin pairs in hexagonal boron nitride

Optically addressable solid-state spins are an important platform for practical quantum technologies. Van der Waals material hexagonal boron nitride (hBN) is a promising host as it contains a wide variety of optical emitters, but thus far observations of addressable spins have been sparse, and most of them lacked a demonstration of coherent spin control. Here we demonstrate robust optical readout of spin pairs in hBN with emission wavelengths spanning from violet to the near-infrared. We find these broadband spin pairs exist naturally in a variety of hBN samples from bulk crystals to powders to epitaxial films, and can be coherently controlled across the entire wavelength range. Furthermore, we identify the optimal wavelengths for independent readout of spin pairs and boron vacancy spin defects co-existing in the same sample. Our results establish the ubiquity of the optically addressable spin pair system in hBN across a broad parameter space, making it a versatile playground for spin-based quantum technologies.

cond-mat.mes-hall↗