arXiv subjects

Henry LeDuc

Publications and source records attributed to Henry LeDuc.

6 recordsLinked to original sources

arXiv2026

Near-Quantum-Limited Readout for the Princeton Axion Search using a sub-GHz Kinetic Inductance Traveling Wave Parametric Amplifier

Parametric amplifiers are a workhorse for near-quantum-limited measurements above 1 GHz. However, amplifier development has been more limited below 1 GHz. We present a kinetic inductance traveling-wave parametric amplifier (KI-TWPA) operating over 300-700 MHz, with gain exceeding 30 dB and pump powers of a few hundred nanowatts. The system noise performance, as measured by a variable-temperature noise source, is 2.5-3.5 quanta. This device is a versatile new tool for precision measurements of sub-GHz signals, with applications including readout of semiconductor spin qubits, superconducting detector arrays, and searches for new physics beyond the Standard Model. We characterize aspects of the amplifier performance relevant to axion searches, including gain drift, compression point, amplifier noise at various operating temperatures, readout with an input circulator, and magnetic field insensitivity.

quant-ph↗

arXiv2026

In Situ Interferometric Spatial Mapping Of A Microwave Kinetic Inductance Detector Array

We present a method of spatially mapping microwave kinetic inductance detector (MKID) arrays, in a dark setup. MKIDs are superconducting natively multiplexed resonators which enable kilopixel arrays, such as for the proposed Probe far-Infrared Mission for Astrophysics (PRIMA). In such telescope applications one must map the spatial location of each MKID with their individual resonance frequencies. Traditional LED arrays or beam-mapping methods become increasingly difficult as pixel spacing decreases, e.g., 900 μm separated MKIDs in the spectrometer module of PRIMA. Our new mapping technique uses a cryogenic interferometer in reflection mode. As on-resonance signals reflect from an MKID, they accrue a phase proportional to the path-length, exactly corresponding to their physical distance on the feedline. Specifically, we use a superconducting transmission line that has nonlinear kinetic inductance. The slow-wave structure of this nonlinear device is designed to have a signal speed of 0.64% the speed of light, enabling a compact system. Current biasing this line allows for varying the wave speed and ensuring that the phase measured is periodic within a nulling interferometric mode. Using this setup, we measure a length ordering that reflects the bimodal MKID distribution of a 44 pixel array of MKIDs designed for PRIMA which contains the same spacing as the final kilopixel array design.

astro-ph.IM↗

arXiv2024

A 4-8 GHz Kinetic Inductance Travelling-Wave Parametric Amplifier Using Four-Wave Mixing with Near Quantum-Limit Noise Performance

Kinetic inductance traveling-wave parametric amplifiers (KI-TWPA) have a wide instantaneous bandwidth with near quantum-limited performance and a relatively high dynamic range. Because of this, they are suitable readout devices for cryogenic detectors and superconducting qubits and have a variety of applications in quantum sensing. This work discusses the design, fabrication, and performance of a KI-TWPA based on four-wave mixing in a NbTiN microstrip transmission line. This device amplifies a signal band from 4 to 8~GHz without contamination from image tones, which are produced in a separate higher frequency band. The 4 - 8~GHz band is commonly used to read out cryogenic detectors, such as microwave kinetic inductance detectors (MKIDs) and Josephson junction-based qubits. We report a measured maximum gain of over 20 dB using four-wave mixing with a 1-dB gain compression point of -58 dBm at 15 dB of gain over that band. The bandwidth and peak gain are tunable by adjusting the pump-tone frequency and power. Using a Y-factor method, we measure an amplifier-added noise of $ 0.5 \leq N_{added} \leq 1.5$ photons from 4.5 - 8 GHz.

quant-ph↗

arXiv2023

Plasma-enhanced atomic layer deposition of titanium nitride for superconducting devices

This study presents a comprehensive investigation into the exceptional superconducting attributes of titanium nitride (TiN) achieved through plasma-enhanced atomic layer deposition (PEALD) on both planar and intricate three-dimensional (3D) structures. We introduced an additional substrate biasing cycle to densify the film and remove ligand residues, augmenting the properties while minimizing impurities. While reactive-sputtered TiN films exhibit high quality, our technique ensures superior uniformity by consistently maintaining a desired sheet resistance greater than 95 percent across a 6inch wafer, a critical aspect for fabricating extensive arrays of superconducting devices and optimizing wafer yield. Moreover, our films demonstrate exceptional similarity to conventional reactive-sputtered films, consistently reaching a critical temperature (Tc) of 4.35 K with a thickness of around 40 nm. This marks a notable achievement compared to previously reported ALD-based superconducting TiN. Using the same process as for planar films, we obtained Tc for aspect ratios (ARs) ranging from 2 to 40, observing a Tc of approximately 2 K for ARs between 2 and 10.5. We elucidate the mechanisms contributing to the limitations and degradation of superconducting properties over these aggressive 3D structures. Our results seamlessly align with both current and next-generation superconducting technologies, meeting stringent criteria for thin-film constraints, large-scale deposition, conformality, 3D integration schemes, and yield optimization.

cond-mat.supr-con↗

arXiv2023

Parallel Plate Capacitor Aluminum KIDs for Future Far-Infrared Space-Based Observatories

Future space-based far-infrared astrophysical observatories will require exquis-itely sensitive detectors consistent with the low optical backgrounds. The PRobe far-Infrared Mission for Astrophysics (PRIMA) will deploy arrays of thousands of superconducting kinetic inductance detectors (KIDs) sensitive to radiation between 25 and 265 $μ$m. Here, we present laboratory characterization of prototype, 25 -- 80 $μ$m wavelength, low-volume, aluminum KIDs designed for the low-background environment expected with PRIMA. A compact parallel plate capacitor is used to minimize the detector footprint and suppress TLS noise. A novel resonant absorber is designed to enhance response in the band of interest. We present noise and optical efficiency measurements of these detectors taken with a low-background cryostat and a cryogenic blackbody. A microlens-hybridized KID array is found to be photon noise limited down to about 50 aW with a limiting detector NEP of about $6.5 \times 10^{-19}~\textrm{W/Hz}^{1/2}$. A fit to an NEP model shows that our optical system is well characterized and understood down to 50 aW. We discuss future plans for low-volume aluminum KID array development as well as the testbeds used for these measurements.

astro-ph.IM↗

arXiv2008

Experimental evidence for a surface distribution of two-level systems in superconducting lithographed microwave resonators

We present measurements of the temperature-dependent frequency shift of five niobium superconducting coplanar waveguide microresonators with center strip widths ranging from 3 $μ$m to 50 $μ$m, taken at temperatures in the range 100-800 mK, far below the 9.2 K transition temperature of niobium. These data agree well with the two-level system (TLS) theory. Fits to this theory provide information on the number of TLS that interact with each resonator geometry. The geometrical scaling indicates a surface distribution of TLS, and the data are consistent with a TLS surface layer thickness of order a few nm, as might be expected for a native oxide layer.

cond-mat.supr-con↗