arXiv subjects

Henning Helmers

Publications and source records attributed to Henning Helmers.

4 recordsLinked to original sources

arXiv2026

Light Coils: MRI with Fully Optical Data and Power Transmission

In MRI, dense receiver coil arrays with a high number of coil elements are used to efficiently detect and encode the signal. Further increasing the number of coils is hampered by electrical cabling and massive electronics that introduce electromagnetic coupling, integration complexity and even safety constraints. Here we introduce the novel Light Coils concept, a fully optical MRI receive architecture in which data transmission, front-end power delivery, and coil detuning are all implemented optically, thereby reducing the massive galvanic cabling to a few optical fibers. For signal encoding, Mach-Zehnder modulators (MZM) are used to convert the MR signal from each coil onto a C-band optical carrier. The preamplifiers are driven via a power-over-fiber (PoF) system that uses a high-efficiency photovoltaic (PV) cell for optical-to-electrical power conversion. A pulse-sequence-triggered optical path controls active detuning. Jointly optimizing modulator bias, optical power and front-end gain under realistic receiver chain conditions, Light Coils can match the signal-to-noise ratio (SNR) of conventional RF coil systems with galvanic cables at MZM input powers of 5-10mW and photonic power converter inputs of 80-100mW. At a clinical 3T MRI system, we show in vivo human brain imaging with a single-channel Light Coil element with an image quality and SNR comparable to a conventional coaxial readout using the identical coil element. Extending the concept to a four-channel array using dense wavelength-division multiplexing over a single fiber, we demonstrate wavelength-selective routing with inter-channel optical isolation exceeding 28dB, reduced noise correlation compared with the galvanic reference, and parallel imaging. These results establish a scalable route towards lightweight, modular, and potentially ultra-dense MRI receive arrays based on integrated photonics and power-over-fiber.

eess.SP↗

arXiv2025

Multi-Segment Photonic Power Converters for Energy Harvesting and High-Speed Optical Wireless Communication

The demand for energy-efficient high-speed wireless communication, coupled with the rapid rise of IoT devices, requires systems that integrate power harvesting with optical data reception to eliminate the need for charging or battery replacements. Recent advances have explored the use of solar cells as optical receivers for high-speed data detection alongside power harvesting. \acs{GaAs}-based \acp{PPC} provide six times greater electron mobility than silicon- or cadmium telluride-based cells, enabling faster data detection and improved power efficiency. However, their bandwidth is constrained by junction capacitance, which increases with active area, creating a trade-off between power output and data rate. To address this, we propose and test multi-segment \acs{GaAs}-based \Acp{PPC} that serve as both energy harvesters and data detectors. By segmenting the active area into 2, 4, or 6 subcells, forming circular areas with diameters of 1, 1.5, or 2.08~mm, we reduce capacitance and boost bandwidth while preserving light collection. Fabricated on a semi-insulating \ac{GaAs} substrate with etched trenches for electrical isolation, the series-connected subcells optimize absorption and minimize parasitic effects. The \Acp{PPC} were used for an eye-safe 1.5~m optical wireless link, employing \ac{OFDM} with adaptive bit and power loading. The system achieved a world record data rate of 3.8~Gbps, which is four times higher than prior works. The system converts 39.7\% of optical power from a beam of 2.3~mW, although the segmentation increases the sensitivity of the alignment. These findings provide new solutions for off-grid backhaul for future communication networks, such as 6th generation (6G) cellular.

eess.SY↗

arXiv2024

Optical Wireless Communications: Enabling the Next Generation Network of Networks

Optical wireless communication (OWC) is a promising technology anticipated to play a key role in the next-generation network of networks, especially as a complementary technology to traditional radio frequency communications, for enhancing networking capabilities beyond conventional terrestrial networks. OWC is already a mature technology with diverse usage scenarios, and can enable integrated applications via wireless access and backhaul networks, dynamic drone and satellite networks, underwater networks, inter- and intra-system interconnecting networks, and vehicular communication networks. Furthermore, novel and emerging technological opportunities such as photovoltaic cells, orbital angular momentum-based modulation, optical reconfigurable intelligent surfaces, organic light-emitting and photo diodes, and recent advances in ultraviolet communications can help enhance future OWC capabilities even further. Moreover, OWC networks can also support value-added services such as enhanced positioning and gesture recognition. Hence, OWC provides unique functionalities that can play a crucial role in building convergent and resilient future network of networks alongside radio frequency and optical fiber technologies.

eess.SP↗

arXiv2022

Worldwide Energy Harvesting Potential of Hybrid CPV/PV Technology

Hybridization of multi-junction concentrator photovoltaics with single-junction flat plate solar cells (CPV/PV) can deliver the highest power output per module area of any PV technology. Conversion efficiencies up to 34.2% have been published under the AM1.5g spectrum at standard test conditions for the EyeCon module which combines Fresnel lenses and III-V four-junction solar cells with bifacial c-Si. We investigate here its energy yield and compare it to conventional CPV as well as flat plate PV. The advantage of the hybrid CPV/PV module is that it converts direct sunlight with the most advanced multi-junction cell technology, while accessing diffuse, lens-scattered and back side irradiance with a Si cell that also serves as the heat distributor for the concentrator cells. This article quantifies that hybrid bifacial CPV/PV modules are expected to generate a 25 - 35% higher energy yield with respect to their closest competitor in regions with a diffuse irradiance fraction around 50%. Additionally, the relative cost of electricity generated by hybrid CPV/PV technology was calculated worldwide under certain economic assumptions. Therefore, this article gives clear guidance towards establishing competitive business cases for the technology.

eess.SY↗