arXiv subjects

Heiko Lacker

Publications and source records attributed to Heiko Lacker.

18 recordsLinked to original sources

arXiv2025

Simulation of charge transport at the surface of planar silicon sensors

Radiation-hard silicon sensors used in high-energy physics require a high electric field and are susceptible to surface breakdown. This study aims to improve the understanding of the underlying mechanisms by developing new methods to probe the electric field at surface near the sensor's edge. For planar sensors, avalanche breakdown primarily occurs at the Si-SiO2 interface, where localized electric field peaks can form between the guard ring and the edge. Accurate simulations are challenging and it is essential to validate simulation parameters by comparing the simulation results to measurements. In this work, the electrical behavior of the edge region of planar silicon diodes was simulated using Synopsis TCAD. Transient Current Technique (TCT) simulations were performed in both TCAD and Allpix Squared, and compared to measurements. Additionally, laser scans over the edge region were performed in Allpix Squared to evaluate the simulated surface electric field and charge collection efficiency.

physics.ins-det↗

arXiv2024

Design Space Exploration for Particle Detector Read-out Implementations in Matlab and Simulink on the Example of the SHiP SBT

On a very fundamental level, particle detectors share similar requirements for their read-out chain. This is reflected in the way that typical read-out solutions are developed, where a previous design is taken and modified to fit some changes in requirements. One of the two common approaches is the current-based read-out, where the waveform of the sensor output is sampled in order to later extract information from there. This approach is used in many detector applications using scintillation based detectors, including PET. With this contribution, we will introduce how we use Matlab in order to simulate the read-out electronics of particle detectors. We developed this simulation approach as a base for our ongoing development of software-defined read-out ASICs that cover the requirements of a variety of particle detector types. Simulink was chosen as a base for our developments as it allows simulation of mixed-signal systems and comes with built-in toolkits to aid in developments of such systems. With our approach, we want to take a new look at how we approach designing such a read-out, with a focus on digital signal processing close to the sensor, making use of known signal characteristics and modern methods of communications engineering. We are taking into account the time profile of an event, the bandwidth-limiting properties of the sensor and attached electronics, digitization stages and finally the parameterization of approaches for digital processing of the signal. We will show how we are applying the design approach to the development of a read-out for the proposed SHiP SBT detector, which is a scintillation based detector relying on SiPMs sensors, using this as an example for our modelling approach and show preliminary results.

physics.ins-det↗

arXiv2020

Precision Global Determination of the $B\to X_s\gamma$ Decay Rate

We perform the first global fit to inclusive $B\to X_s\gamma$ measurements using a model-independent treatment of the nonperturbative $b$-quark distribution function, with next-to-next-to-leading logarithmic resummation and $\mathcal{O}(\alpha_s^2)$ fixed-order contributions. The normalization of the $B\to X_s\gamma$ decay rate, given by $\lvert C_7^{\rm incl} V_{tb} V_{ts}^*\rvert^2$, is sensitive to physics beyond the Standard Model (SM). We determine $\lvert C_7^{\rm incl} V_{tb} V_{ts}^* \rvert = (14.77 \pm 0.51_{\rm fit} \pm 0.59_{\rm theory} \pm 0.08_{\rm param})\times 10^{-3}$, in good agreement with the SM prediction, and the $b$-quark mass $m_b^{1S} = (4.750 \pm 0.027_{\rm fit} \pm 0.033_{\rm theory} \pm 0.003_{\rm param})\,\mathrm{GeV}$. Our results suggest that the uncertainties in the extracted $B\to X_s\gamma$ rate have been underestimated by up to a factor of two, leaving more room for beyond-SM contributions.

hep-ph↗

arXiv2015

Alternative glues for the production of ATLAS silicon strip modules for the Phase-II upgrade of the ATLAS Inner Detector

The Phase-II upgrade of the ATLAS detector for the High Luminosity Large Hadron Collider (HL-LHC) includes the replacement of the current Inner Detector with an all-silicon tracker consisting of pixel and strip detectors. The current Phase-II detector layout requires the construction of 20,000 strip detector modules consisting of sensor, circuit boards and readout chips, which are connected mechanically using adhesives. The adhesive between readout chips and circuit board is a silver epoxy glue as was used in the current ATLAS SemiConductor Tracker (SCT). This glue has several disadvantages, which motivated the search for an alternative. This paper presents a study concerning the use of six ultra-violet (UV) cure glues and a glue pad for use in the assembly of silicon strip detector modules for the ATLAS upgrade. Trials were carried out to determine the ease of use, the thermal conduction and shear strength, thermal cycling, radiation hardness, corrosion resistance and shear strength tests. These investigations led to the exclusion of three UV cure glues as well as the glue pad. Three UV cure glues were found to be possible better alternatives. Results from electrical tests of first prototype modules constructed using these glues are presented.

physics.ins-det↗

arXiv2014

Constraints on exclusive branching fractions $BF_i(B^+\to X_c^il^+ν)$ from moment measurements in inclusive $B\to X_clν$ decays

As an alternative to direct measurements, we extract exclusive branching fractions of semileptonic B-meson decays to charmed mesons, $BF_i(B\to X_c^ilν)$ with $X_c^i = D, D^*, D_0, D'_1, D_1, D_2, D', D'^*$ and non-resonant final states $(D^{(*)}π)_{nr}$, from a fit to electron energy, hadronic mass and combined hadronic mass-energy moments measured in inclusive $B\to X_clν$ decays. The fit is performed by constraining the sum of exclusive branching fractions to the measured value of $BF(B\to X_clν)$, and with different sets of additional constraining terms for the directly measured branching fractions. There is no fit scenario in which a single branching fraction alone is enhanced to close the gap between $BF(B\to X_clν)$ and the sum of known branching fractions $BF_i(B\to X_c^ilν)$. The fitted $BF(B\to D^*lν)$ is 5% to 10% larger than the direct measurement depending on whether or not $BF(B\to D^*lν)$ is constrained to its direct measurement. $BF(B\to Dlν)$ values are in good agreement with the direct measurement unless $BF(B\to D^*lν)$ is constrained, which results in a higher $BF(B\to Dlν)$ value. Within large uncertainties, $BF(B\to D'_1lν)$ agrees with direct measurements. Depending on the fit scenario, $BF(B\to D_0lν)$ is consistent with or larger than its direct measurement. The fit is not able to easily disentangle $B\to D_1lν$ and $B\to D_2lν$, and tends to increase the sum of these two branching fractions. $BF(B\to (D^{(*)}π)_{nr}lν)$ with non-resonant $(D^{(*)}π)_{nr}$ final states is found to be 0.2-0.4%, consistent with $B\to D^{(*)}πlν$ and $B\to D^{**}(D^{(*)}π)lν$ measurements. No indication is found for significant contributions from so far unmeasured $B\to D'^{(*)}lν$ decays assuming that the $D'$ and $D'^*$ can be identified with the observed $D(2550)$, respectively, $D^*(2600)$ state.

hep-ph↗

arXiv2013

A model independent determination of the B -> Xs gamma decay rate

The goal of the SIMBA collaboration is to provide a global fit to the available measurements of inclusive B -> X_s gamma and B -> X_u l nu decays. By performing a global fit one is able to simultaneously determine the relevant normalizations, i.e. the total B -> X_s gamma rate and the CKM-matrix element |Vub|, together with the required hadronic parameters, most importantly the b-quark mass and the b-quark distribution function in the B-meson, called the shape function. In this talk, the current status on the model-independent determination of the shape function and |C7^\incl Vtb Vts*|, which parametrizes the total B -> Xs gamma rate, from a global fit to the available B -> X_s gamma measurements from Babar and Belle is presented. In particular, the theoretical uncertainties originating from variations of the different factorization scales are evaluated.

hep-ph↗

arXiv2012

Impact of a Higgs boson at a mass of 126 GeV on the standard model with three and four fermion generations

We perform a comprehensive statistical analysis of the standard model (SM) with three and four generations using the latest Higgs search results from LHC and Tevatron, the electroweak precision observables (EWPOs) measured at LEP and SLD and the latest determinations of M_W, m_t and alpha_s. For the three-generation case we analyse the tensions in the electroweak fit by removing individual observables from the fit and comparing their predicted values with the measured ones. In particular, we discuss the impact of the Higgs search results on the deviations of the EWPOs from their best-fit values. Our indirect prediction of the top mass is m_t=175.7(+3.0)(-2.2) GeV at 68.3% CL, in good agreement with the direct measurement. We also plot the preferred area in the M_W - m_t plane. The best-fit Higgs mass is 126.0 GeV. For the case of the SM with a perturbative sequential fourth fermion generation (SM4) we discuss the deviations of the Higgs signal strengths from their best-fit values. The H -> gamma gamma signal strength now disagrees with its best-fit SM4 value at more than 4 sigma. We perform a likelihood-ratio test to compare the SM and SM4 and show that the SM4 is excluded at 5.3 sigma. Without the Tevatron data on H -> b bbar the significance drops to 4.8 sigma.

hep-ph↗

arXiv2012

Joint analysis of Higgs decays and electroweak precision observables in the Standard Model with a sequential fourth generation

We analyse the impact of LHC and Tevatron Higgs data on the viability of the Standard Model with a sequential fourth generation (SM4), assuming Dirac neutrinos and a Higgs mass of 125 GeV. To this end we perform a combined fit to the signal cross sections of pp -> H -> gamma gamma,ZZ*,WW* at the LHC, to p pbar -> VH -> V b bbar (V = W, Z) at the Tevatron and to the electroweak precision observables. Fixing the mass of the fourth generation down-type quark b' to 600 GeV we find best-fit values of m_t' = 632 GeV, m_l4 = 113.6 GeV and m_nu4 = 58.0 GeV for the other fourth-generation fermion masses. We compare the chi-square values and pulls of the different observables in the three and four-generation case and show that the data is better described by the three-generation Standard Model. We also investigate the effects of mixing between the third and fourth-generation quarks and of a future increased lower bound on the fourth-generation charged lepton mass of 250 GeV.

hep-ph↗

arXiv2011

Status of SIMBA

The goal of the SIMBA collaboration is to provide a global fit to the available data in inclusive B -> X_s gamma and B -> X_u l nu decays. By performing a global fit one is able to simultaneously determine the relevant normalizations, i.e. the total B -> X_s gamma rate and the CKM-matrix element |Vub|, together with the required input parameters, most importantly the b-quark mass and the b-quark distribution function in the B-meson, called the shape function. This strategy is analogous to the determination of |Vcb| from global fits to inclusive B -> X_c l nu decays. In this talk, we present preliminary results for the shape function and |C_7^incl Vtb Vts^*|, which parametrizes the total B -> X_s gamma rate, from a global fit to the available B -> X_s gamma measurements from BABAR and Belle.

hep-ph↗

arXiv2010

Towards a global fit to extract the B->Xs gamma decay rate and Vub

The total B->Xs gamma decay rate and the CKM-matrix element Vub play an important role in finding indirect evidence for new physics affecting the flavor sector of the Standard Model, complementary to direct searches at the LHC and Tevatron. Their determination from inclusive B-meson decays requires the precise knowledge of the parton distribution function of the b quark in the B meson, called the shape function. We implement a new model-independent framework for the shape function with reliable uncertainties based on an expansion in a suitable set of basis functions. We present the current status of a global fit to BaBar and Belle data to extract the shape function and the B->Xs gamma decay rate.

hep-ph↗

arXiv2010

A phenomenological model for radiative corrections in exclusive semileptonic B-meson decays to (pseudo)scalar final state mesons

Next-to-leading order corrections are an important aspect in the extraction of the Cabibbo- Kobayashi-Maskawa matrix elements $|V_{\text{cb}}|$ and $|V_{\text{ub}}|$ at $B$-factory experiments: virtual and real photons couple to all charged particles of the decay, alter the resulting decay dynamics and enhance the total decay rate. We present a phenomenologically motivated model and a Monte-Carlo implementation to study electromagnetic radiative corrections to differential and total decay rates for semileptonic $B$-meson decays into exclusive pseudoscalar and scalar final states and apply it to $B \to D \, l \, ν$ and $B \to π\, l \, ν$, and $B \to D_0^* \, l \, ν$ decays, respectively. We study such corrections with a phenomenological picture of point-like mesons (with some structure-dependent corrections), which is valid in the low-energy region of the photons and whose results we extrapolate over the complete phase space. The largest quantifiable uncertainty is due to the approximative matching to the Standard Model. In addition unknown structure-dependent contributions and model dependencies might have an impact on our findings.

hep-ph↗

arXiv2010

New developments in event generator tuning techniques

Data analyses in hadron collider physics depend on background simulations performed by Monte Carlo (MC) event generators. However, calculational limitations and non-perturbative effects require approximate models with adjustable parameters. In fact, we need to simultaneously tune many phenomenological parameters in a high-dimensional parameter-space in order to make the MC generator predictions fit the data. It is desirable to achieve this goal without spending too much time or computing resources iterating parameter settings and comparing the same set of plots over and over again. We present extensions and improvements to the MC tuning system, Professor, which addresses the aforementioned problems by constructing a fast analytic model of a MC generator which can then be easily fitted to data. Using this procedure it is for the first time possible to get a robust estimate of the uncertainty of generator tunings. Furthermore, we can use these uncertainty estimates to study the effect of new (pseudo-) data on the quality of tunings and therefore decide if a measurement is worthwhile in the prospect of generator tuning. The potential of the Professor method outside the MC tuning area is presented as well.

hep-ph↗

arXiv2010

Simultaneous Extraction of the Fermi constant and PMNS matrix elements in the presence of a fourth generation

Several recent studies performed on constraints of a fourth generation of quarks and leptons suffer from the ad-hoc assumption that 3 x 3 unitarity holds for the first three generations in the neutrino sector. Only under this assumption one is able to determine the Fermi constant G_F from the muon lifetime measurement with the claimed precision of G_F = 1.16637 (1) x 10^-5 GeV^-2. We study how well G_F can be extracted within the framework of four generations from leptonic and radiative mu and tau decays, as well as from K_l3 decays and leptonic decays of charged pions, and we discuss the role of lepton universality tests in this context. We emphasize that constraints on a fourth generation from quark and lepton flavour observables and from electroweak precision observables can only be obtained in a consistent way if these three sectors are considered simultaneously. In the combined fit to leptonic and radiative mu and tau decays, K_l3 decays and leptonic decays of charged pions we find a p-value of 2.6% for the fourth generation matrix element |U_{e 4}|=0 of the neutrino mixing matrix.

hep-ph↗

arXiv2010

Limit on a Right-Handed Admixture to the Weak $b \to c$ Current from Semileptonic Decays

We determine an upper bound for a possible right-handed $b{\to}c$ quark current admixture in semileptonic $\bar{B} \to X_{c} \ell^{-} \barν$ decays from a simulateous fit to moments of the lepton-enery and hadronic-mass distribution measured as a function of the lower limit on the lepton energy, using data measured by the \babar\ detector. The right-handed admixture is parametrized by a new parameter $c_R$ as coefficient of computed moments with right-handed quark current. For the standard model part we use the prediction of the heavy-quark expansion (HQE) up to order $1/m_b^3$ and perturbative corrections and for the right-handed contribution only up to order $1/m_b^2$ and perturbative corrections. We find $\cR=0.05\asympm{+0.33}{-0.50}$ in agreement with the standard-model prediction of zero. Additionally, we give a contraint on a possible right-handed admixture from exclusive decays, which is with a value of $\cR =0.01{\pm}0.03$ more restrictive than our value from the inclusive fit. The difference in \Vcb between the inclusive and exclusive extraction is only slightly reduced when allowing for a right-handed admixture in the range of $\cR=0.01 {\pm} 0.03$.

hep-ph↗

arXiv2009

Systematic event generator tuning for the LHC

In this article we describe Professor, a new program for tuning model parameters of Monte Carlo event generators to experimental data by parameterising the per-bin generator response to parameter variations and numerically optimising the parameterised behaviour. Simulated experimental analysis data is obtained using the Rivet analysis toolkit. This paper presents the Professor procedure and implementation, illustrated with the application of the method to tunes of the Pythia 6 event generator to data from the LEP/SLD and Tevatron experiments. These tunes are substantial improvements on existing standard choices, and are recommended as base tunes for LHC experiments, to be themselves systematically improved upon when early LHC data is available.

hep-ph↗

arXiv2009

Monte Carlo tuning and generator validation

We present the Monte Carlo generator tuning strategy followed, and the tools developed, by the MCnet CEDAR project. We also present new tuning results for the Pythia 6.4 event generator which are based on event shape and hadronisation observables from e+e- experiments, and on underlying event and minimum bias data from the Tevatron. Our new tunes are compared to existing tunes and to Peter Skands' new "Perugia" tunes.

hep-ph↗

arXiv2007

Measurement of sin2beta in tree-dominated B0-decays and ambiguity removal

The most recent results from the B-factories on the time-dependent CP asymmetries measured in B0-decays mediated by b --> c c(bar) s quark-transitions are reviewed. The Standard Model interpretation of the results in terms of the parameter sin2beta leads to a four-fold ambiguity on the unitarity triangle beta which can be reduced to a two-fold ambiguity by measuring the sign of the parameter cos2beta. The results on cos2beta obtained so far are reviewed.

hep-ex↗

arXiv2003

Interpreting CP Asymmetries in B->pi+ pi- Decays

We discuss methods used to interpret the measurements of CP-asymmetry in B->pi+pi- within the framework of the Standard Model. Interpretations using various theoretical inputs are given, ranging from the rather general, yet unpredictive, properties based on strong isospin symmetry to highly predictive calculations using QCD Factorization. The calculations are performed using the software package CKMFitter and a frequentist method, Rfit.

hep-ph↗