arXiv subjects

Heike Ebendorff-Heidepriem

Publications and source records attributed to Heike Ebendorff-Heidepriem.

14 recordsLinked to original sources

arXiv2026

A robust laser cavity platform for NV-diamond singlet infrared absorption magnetometry

The negatively charged nitrogen-vacancy center (NV$^-$) in diamond is a versatile platform for quantum magnetometry under ambient conditions. Recently, laser threshold magnetometry (LTM) has been proposed as a means to significantly enhance the sensitivity of NV-based magnetometers by incorporating a diamond hosting NV$^-$ centers within a laser cavity and operating near threshold. While demonstrations have validated the concept, practical implementations remain technically demanding, requiring high pump powers and precise alignment of free-space cavities. It remains unclear whether the benefits of operating near threshold will outpace increased laser noise. In this work, we integrate an NV-diamond with a high NV$^-$ content into a compact external cavity diode laser and demonstrate singlet infrared absorption optically detected magnetic resonance (ODMR). The system exhibits exceptional threshold current stability, enabling ODMR using the threshold current as the read-out parameter. We report a five-fold enhancement in the ODMR contrast by operating near threshold. The best magnetic field sensitivity of $7.6~\mathrm{nT/\sqrt{Hz}}$ (DC-500 Hz) is achieved well above threshold, while near threshold sensitivity is limited by increased probe laser noise. These results establish a compact and mechanically robust platform for singlet absorption-based NV$^-$ magnetometry and highlight key trade-offs between contrast enhancement and laser noise near threshold.

quant-ph↗

arXiv2025

All-optical electric field sensing with nanodiamond-doped polymer thin films

The nitrogen-vacancy (NV) center is a photoluminescent defect in diamond that exists in different charge states, NV$^-$ and NV$^0$, that are sensitive to the NV's nanoscale environment. Here, we show that photoluminescence (PL) from NV centers in fluorescent nanodiamonds (FNDs) can be employed for all-optical voltage sensing based on electric field-induced NV charge state modulation. More than 95% of FNDs integrated into a capacitor device show a transient increase in NV$^-$ PL intensity of up to 31% within 0.1 ms after application of an external voltage, accompanied by a simultaneous decrease in NV$^0$ PL. The change in NV$^-$ PL increases with increasing applied voltage from 0 to 100 V, corresponding to an electric field of 0 to 625 kV cm$^ {-1}$ in our devices. The electric field sensitivity of a single FND is 19 V cm$^{-1}$ Hz$^ {-1/2}$. We investigate the NV charge state photodynamics on the millisecond timescale and find that the change in NV PL strongly depends on the rate of photoexcitation. We propose a model that qualitatively explains the observed changes in NV PL based on an electric field-induced redistribution of photoexcited electrons from substitutional nitrogen defects to NV centers, leading to a transient conversion of NV$^0$ to NV$^-$ centers upon application of an external voltage. Our results contribute to the development of FNDs as reliable, all-optical, nanoscale electric field sensors in solid-state systems.

cond-mat.mes-hall↗

arXiv2023

Mitigating stimulated Brillouin scattering in multimode fibers with focused output via wavefront shaping

The key challenge for high-power delivery through optical fibers is overcoming nonlinear optical effects. To keep a smooth output beam, most techniques for mitigating optical nonlinearities are restricted to single-mode fibers. Moving out of the single-mode paradigm, we show experimentally that wavefront-shaping of coherent input light that is incident on a highly multimode fiber can increase the power threshold for stimulated Brillouin scattering (SBS) by an order of magnitude, whilst simultaneously controlling the output beam profile. The theory reveals that the suppression of SBS is due to the relative weakness of intermodal scattering compared to intramodal scattering, and to an effective broadening of the Brillouin spectrum under multimode excitation. Our method is efficient, robust, and applicable to continuous waves and pulses. This work points toward a promising route for suppressing detrimental nonlinear effects in optical fibers, which will enable further power scaling of high-power fiber systems for applications to directed energy, remote sensing, and gravitational-wave detection.

physics.optics↗

arXiv2021

In-fiber second-harmonic generation with embedded two-dimensional materials

Silica-based optical fibers are a workhorse of nonlinear optics. They have been used to demonstrate nonlinear phenomena such as solitons and self-phase modulation. Since the introduction of the photonic crystal fiber, they have found many exciting applications, such as supercontinuum white light sources and third-harmonic generation, among others. They stand out by their low loss, large interaction length, and the ability to engineer its dispersive properties, which compensate for the small chi(3) nonlinear coefficient. However, they have one fundamental limitation: due to the amorphous nature of silica, they do not exhibit second-order nonlinearity, except for minor contributions from surfaces. Here, we demonstrate significant second-harmonic generation in functionalized optical fibers with a monolayer of highly nonlinear MoS2 deposited on the fiber guiding core. The demonstration is carried out in a 3.5 mm short piece of exposed core fiber, which was functionalized in a scalable process CVD-based process, without a manual transfer step. This approach is scalable and can be generalized to other transition metal dichalcogenides and other waveguide systems. We achieve an enhancement of more than 1000x over a reference sample of equal length. Our simple proof-of-principle demonstration does not rely on either phase matching to fundamental modes, or ordered growth of monolayer crystals, suggesting that pathways for further improvement are within reach. Our results do not just demonstrate a new path towards efficient in-fiber SHG-sources, instead, they establish a platform with a new route to chi(2)-based nonlinear fiber optics, optoelectronics, and photonics platforms, integrated optical architectures, and active fiber networks.

physics.optics↗

arXiv2020

Scalable functionalization of optical fibers using atomically thin semiconductors

Atomically thin transition metal dichalcogenides are highly promising for integrated optoelectronic and photonic systems due to their exciton-driven linear and nonlinear interaction with light. Integrating them into optical fibers yields novel opportunities in optical communication, remote sensing, and all-fiber optoelectronics. However, scalable and reproducible deposition of high quality monolayers on optical fibers is a challenge. Here, we report the chemical vapor deposition of monolayer MoS2 and WS2 crystals on the core of microstructured exposed core optical fibers and their interaction with the fibers' guided modes. We demonstrate two distinct application possibilities of 2D-functionalized waveguides to exemplify their potential. First, we simultaneously excite and collect excitonic 2D material photoluminescence with the fiber modes, opening a novel route to remote sensing. Then we show that third harmonic generation is modified by the highly localized nonlinear polarization of the monolayers, yielding a new avenue to tailor nonlinear optical processes in fibers. We anticipate that our results may lead to significant advances in optical fiber based technologies.

physics.app-ph↗

arXiv2020

Fluorescent diamond microparticles doped glass fiber for magnetic field sensing

Diamond containing the negatively charged nitrogen-vacancy (NV) center is emerging as a significant new system for magnetometry. However, most NV sensors require microscopes to collect the fluorescence signals and are therefore limited to laboratory settings. By incorporating micron-scale diamond particles at an annular interface within the cross section of a silicate glass fiber, a high-sensitivity and robust fiber platform for magnetic field sensing is demonstrated here. The fluorescence and spin properties of NV centers embedded in the diamond crystals are well preserved during the fiber drawing process, leading to enhanced continuous-wave diamond-magnetometry in fiber-transmitted sensing configurations. The interface doping of diamond particles also leads to reduced fiber propagation loss and benefits the guidance of NV-fluorescence in the hybrid fiber. Using the diamond-fiber system, magnetic field readout through 50 cm of fiber is achieved. This study paves the way for novel fiber-based diamond sensors for field-deployable quantum metrology applications.

physics.app-ph↗

arXiv2020

Continuous spatial field confocal thermometry using lanthanide doped tellurite glass

Quantifying temperature variations at the micron scale can provide new opportunities in optical sensing. In this paper, we present a novel approach using the temperature-dependent variations in fluorescence of rare-earth doped tellurite glass to provide a micron-scale image of temperature variations over a 200 micrometre field of view. We demonstrate the system by monitoring the evaporation of a water droplet and report a net temperature change of 7.04 K with a sensitivity of at least 0.12 K. These results establish the practicality of this confocal-based approach to provide high-resolution marker-free optical temperature sensing.

physics.app-ph↗

arXiv2019

A carbon-nanofiber glass composite with high electrical conductivity

The use of oxide glasses is pervasive throughout everyday amenities and commodities. Such glasses are typically electrical insulators, and endowing them with electrical conductivity without changing their salutary mechanical properties, weight, or thermoformability enables new applications in multifunctional utensils, smart windows, and automotive parts. Previous strategies to impart electrical conductivity include modifying the glass composition or forming a solid-in-solid composite of the glass and a conductive phase. Here we demonstrate using the latter strategy the highest reported room-temperature electrical conductivity in a bulk oxide glass 1800 S/m corresponding to the theoretical limit for the loading fraction of the conductive phase. This is achieved through glass-sintering of a mixture of carbon nanofibers and oxide flint F2 or soda lime glasses, with the bulk conductivity further enhanced by a polyethylene-block-poly(ethylene glycol) additive. A theoretical model provides predictions that are in excellent agreement with the dependence of conductivity of these composites on the carbon-loading fraction. Moreover, nanoscale electrical characterization of the composite samples provides evidence for the existence of a connected network of carbon nanofibers throughout the bulk. Our results establish a potentially low-cost approach for producing large volumes of highly conductive glass independently of the glass composition.

cond-mat.mtrl-sci↗

arXiv2019

Modal interferometric refractive index sensing in microstructured exposed core fibres

Optical fibre-based sensors measuring refractive index shift in bodily fluids and tissues are versatile and accurate probes of physiological processes. Here, we suggest a refractive index sensor based on a microstructured exposed-core fibre (ECF). By considering a high refractive index coating of the exposed core, our modelling demonstrates the splitting of the guided mode into a surface sensing mode and a mode that is isolated from the surface. With the isolated mode acting as a reference arm, this two-mode one-fibre solution provides for robust interferometric sensing with a sensitivity of up to 60,000 rad/RIU-cm, which is suitable for sensing subtle physiological processes within hard-to-reach places inside living organisms, such as the spinal cord, ovarian tract and blood vessels.

physics.optics↗

arXiv2019

Quantum noise limited nanoparticle detection with exposed-core fiber

Label-free biosensors are important tools for clinical diagnostics and for studying biology at the single molecule level. The development of optical label-free sensors has allowed extreme sensitivity, but can expose the biological sample to photodamage. Moreover, the fragility and complexity of these sensors can be prohibitive to applications. To overcome these problems, we develop a quantum noise limited exposed-core fiber sensor providing robust platform for label-free biosensing with a natural path toward microfluidic integration. We demonstrate the detection of single nanoparticles down to 25 nm in radius with optical intensities beneath known biophysical damage thresholds.

quant-ph↗

arXiv2016

Analysis of 3D-printed metal for rapid-prototyped reflective terahertz optics

We explore the potential of 3D metal printing to realize complex conductive terahertz devices. Factors impacting performance such as printing resolution, surface roughness, oxidation, and material loss are investigated via analytical, numerical, and experimental approaches. The high degree of control offered by a 3D-printed topology is exploited to realize a zone plate operating at 530 GHz. Reflection efficiency at this frequency is found to be over 90%. The high-performance of this preliminary device suggest that 3D metal printing can play a strong role in guided-wave and general beam control devices in the terahertz range.

physics.optics↗

arXiv2016

Remote Nanodiamond Magnetometry

Optical fibres have transformed the way people interact with the world and now permeate many areas of science. Optical fibres are traditionally thought of as insensitive to magnetic fields, however many application areas from mining to biomedicine would benefit from fibre-based remote magnetometry devices. In this work, we realise such a device by embedding nanoscale magnetic sensors into tellurite glass fibres. Remote magnetometry is performed on magnetically active defect centres in nanodiamonds embedded into the glass matrix. Standard optical magnetometry techniques are applied to initialize and detect local magnetic field changes with a measured sensitivity of 26 micron Tesla/square root(Hz). Our approach utilizes straight-forward optical excitation, simple focusing elements, and low power components. We demonstrate remote magnetometry by direct reporting of the magnetic ground states of nitrogen-vacancy defect centres in the optical fibres. In addition, we present and describe theoretically an all-optical technique that is ideally suited to remote fibre-based sensing. The implications of our results broaden the applications of optical fibres, which now have the potential to underpin a new generation of medical magneto-endoscopes and remote mining sensors.

physics.optics↗

arXiv2014

Nanodiamond in tellurite glass Part II: practical nanodiamond-doped fibers

Tellurite glass fibers with embedded nanodiamond are attractive materials for quantum photonics applications. Reducing the loss of these fibers in the 600-800 nm wavelength range of nanodiamond fluorescence is essential to exploit the unique properties of nanodiamond in the new hybrid material. The first part of this study reported the origin of loss in nanodiamond-doped glass and impact of glass fabrication conditions. Here, we report the fabrication of nanodiamond-doped tellurite fibers with significantly reduced loss in the visible through further understanding of the impact of glass fabrication conditions on the interaction of the glass melt with the embedded nanodiamond. We fabricated tellurite fibers containing nanodiamond in concentrations up to 0.7 ppm-weight, while reducing the loss by more than an order of magnitude down to 10 dB/m at 600-800 nm.

physics.optics↗

arXiv2014

Nanodiamond in tellurite glass Part I: origin of loss in nanodiamond-doped glass

Tellurite glass fibers with embedded nanodiamond are attractive materials for quantum photonic applications. Reducing the loss of these fibers in the 600-800 nm wavelength range of nanodiamond fluorescence is essential to exploit the unique properties of nanodiamond in the new hybrid material. In the first part of this study, we report the effect of interaction of the tellurite glass melt with the embedded nanodiamond on the loss of the glasses. The glass fabrication conditions such as melting temperature and concentration of NDs added to the melt were found to have critical influence on the interaction. Based on this understanding, we identified promising fabrication conditions for decreasing the loss to levels required for practical applications.

physics.optics↗