arXiv subjects

He Wang

Publications and source records attributed to He Wang.

At least 325 records · Page 18Linked to original sources

arXiv2022

VFLens: Co-design the Modeling Process for Efficient Vertical Federated Learning via Visualization

As a decentralized training approach, federated learning enables multiple organizations to jointly train a model without exposing their private data. This work investigates vertical federated learning (VFL) to address scenarios where collaborating organizations have the same set of users but with different features, and only one party holds the labels. While VFL shows good performance, practitioners often face uncertainty when preparing non-transparent, internal/external features and samples for the VFL training phase. Moreover, to balance the prediction accuracy and the resource consumption of model inference, practitioners require to know which subset of prediction instances is genuinely needed to invoke the VFL model for inference. To this end, we co-design the VFL modeling process by proposing an interactive real-time visualization system, VFLens, to help practitioners with feature engineering, sample selection, and inference. A usage scenario, a quantitative experiment, and expert feedback suggest that VFLens helps practitioners boost VFL efficiency at a lower cost with sufficient confidence.

cs.HC↗

arXiv2022

Spatio-temporal Keyframe Control of Traffic Simulation using Coarse-to-Fine Optimization

We present a novel traffic trajectory editing method which uses spatio-temporal keyframes to control vehicles during the simulation to generate desired traffic trajectories. By taking self-motivation, path following and collision avoidance into account, the proposed force-based traffic simulation framework updates vehicle's motions in both the Frenet coordinates and the Cartesian coordinates. With the way-points from users, lane-level navigation can be generated by reference path planning. With a given keyframe, the coarse-to-fine optimization is proposed to efficiently generate the plausible trajectory which can satisfy the spatio-temporal constraints. At first, a directed state-time graph constructed along the reference path is used to search for a coarse-grained trajectory by mapping the keyframe as the goal. Then, using the information extracted from the coarse trajectory as initialization, adjoint-based optimization is applied to generate a finer trajectory with smooth motions based on our force-based simulation. We validate our method with extensive experiments.

cs.GR↗

arXiv2022

Tracking and Reconstructing Hand Object Interactions from Point Cloud Sequences in the Wild

In this work, we tackle the challenging task of jointly tracking hand object pose and reconstructing their shapes from depth point cloud sequences in the wild, given the initial poses at frame 0. We for the first time propose a point cloud based hand joint tracking network, HandTrackNet, to estimate the inter-frame hand joint motion. Our HandTrackNet proposes a novel hand pose canonicalization module to ease the tracking task, yielding accurate and robust hand joint tracking. Our pipeline then reconstructs the full hand via converting the predicted hand joints into a template-based parametric hand model MANO. For object tracking, we devise a simple yet effective module that estimates the object SDF from the first frame and performs optimization-based tracking. Finally, a joint optimization step is adopted to perform joint hand and object reasoning, which alleviates the occlusion-induced ambiguity and further refines the hand pose. During training, the whole pipeline only sees purely synthetic data, which are synthesized with sufficient variations and by depth simulation for the ease of generalization. The whole pipeline is pertinent to the generalization gaps and thus directly transferable to real in-the-wild data. We evaluate our method on two real hand object interaction datasets, e.g. HO3D and DexYCB, without any finetuning. Our experiments demonstrate that the proposed method significantly outperforms the previous state-of-the-art depth-based hand and object pose estimation and tracking methods, running at a frame rate of 9 FPS.

cs.CV↗

arXiv2022

Quantum correlations of a two-qubit system and the Aubry-André chain in bosonic environments

In this research, we analyze two models using the tensor network algorithm. The quantum correlations of a two-qubit system are first studied in different bosonic reservoirs. Both equilibrium and nonequilibrium scenarios are discussed. Non-Markovian effects can improve the survival time of the quantum correlations significantly and weaken the decoherence effect. Non-Markovian dynamics with existing memory can lead to entanglement rebirth in specific scenarios instead of the eventual entanglement decay or death seen in memoryless Markovian cases. The system reaches a steady state quickest in sub-Ohmic reservoirs and shows the most apparent non-Markovian behavior in super-Ohmic reservoirs. We not only study the impact of the environment on quantum correlations but also how to protect quantum correlations. Starting from a state in which the two ends are maximally entangled, a one-dimensional AA chain model is also studied. We identify distinct phases by monitoring the imbalance dynamics. When the chain is closed, the imbalance dynamics behave differently in various phases, and so does the entanglement evolution between the chain's ends. When the first site couples to a bath, we found the imbalance dynamics can still be an effective indicator to differentiate various phases in an early evolution stage since the imbalance dynamics is only remarkably affected at relatively high temperatures. The distribution of the eigenenergy of the system can account for it. The entanglement of the chain ends decays rapidly in all phases due to one of the ends being coupled to the bath directly. However, the entanglement of the chain ends will persist for a perceptible amount of time in the localization phase if the bath is coupled to the middle site of the chain. Our research shows that one can utilize the disordered environment as a buffer to protect quantum correlations.

quant-ph↗

arXiv2022

MLGWSC-1: The first Machine Learning Gravitational-Wave Search Mock Data Challenge

We present the results of the first Machine Learning Gravitational-Wave Search Mock Data Challenge (MLGWSC-1). For this challenge, participating groups had to identify gravitational-wave signals from binary black hole mergers of increasing complexity and duration embedded in progressively more realistic noise. The final of the 4 provided datasets contained real noise from the O3a observing run and signals up to a duration of 20 seconds with the inclusion of precession effects and higher order modes. We present the average sensitivity distance and runtime for the 6 entered algorithms derived from 1 month of test data unknown to the participants prior to submission. Of these, 4 are machine learning algorithms. We find that the best machine learning based algorithms are able to achieve up to 95% of the sensitive distance of matched-filtering based production analyses for simulated Gaussian noise at a false-alarm rate (FAR) of one per month. In contrast, for real noise, the leading machine learning search achieved 70%. For higher FARs the differences in sensitive distance shrink to the point where select machine learning submissions outperform traditional search algorithms at FARs $\geq 200$ per month on some datasets. Our results show that current machine learning search algorithms may already be sensitive enough in limited parameter regions to be useful for some production settings. To improve the state-of-the-art, machine learning algorithms need to reduce the false-alarm rates at which they are capable of detecting signals and extend their validity to regions of parameter space where modeled searches are computationally expensive to run. Based on our findings we compile a list of research areas that we believe are the most important to elevate machine learning searches to an invaluable tool in gravitational-wave signal detection.

astro-ph.IM↗

arXiv2022

Learning Category-Level Generalizable Object Manipulation Policy via Generative Adversarial Self-Imitation Learning from Demonstrations

Generalizable object manipulation skills are critical for intelligent and multi-functional robots to work in real-world complex scenes. Despite the recent progress in reinforcement learning, it is still very challenging to learn a generalizable manipulation policy that can handle a category of geometrically diverse articulated objects. In this work, we tackle this category-level object manipulation policy learning problem via imitation learning in a task-agnostic manner, where we assume no handcrafted dense rewards but only a terminal reward. Given this novel and challenging generalizable policy learning problem, we identify several key issues that can fail the previous imitation learning algorithms and hinder the generalization to unseen instances. We then propose several general but critical techniques, including generative adversarial self-imitation learning from demonstrations, progressive growing of discriminator, and instance-balancing for expert buffer, that accurately pinpoints and tackles these issues and can benefit category-level manipulation policy learning regardless of the tasks. Our experiments on ManiSkill benchmarks demonstrate a remarkable improvement on all tasks and our ablation studies further validate the contribution of each proposed technique.

cs.RO↗

arXiv2022

Talking Head from Speech Audio using a Pre-trained Image Generator

We propose a novel method for generating high-resolution videos of talking-heads from speech audio and a single 'identity' image. Our method is based on a convolutional neural network model that incorporates a pre-trained StyleGAN generator. We model each frame as a point in the latent space of StyleGAN so that a video corresponds to a trajectory through the latent space. Training the network is in two stages. The first stage is to model trajectories in the latent space conditioned on speech utterances. To do this, we use an existing encoder to invert the generator, mapping from each video frame into the latent space. We train a recurrent neural network to map from speech utterances to displacements in the latent space of the image generator. These displacements are relative to the back-projection into the latent space of an identity image chosen from the individuals depicted in the training dataset. In the second stage, we improve the visual quality of the generated videos by tuning the image generator on a single image or a short video of any chosen identity. We evaluate our model on standard measures (PSNR, SSIM, FID and LMD) and show that it significantly outperforms recent state-of-the-art methods on one of two commonly used datasets and gives comparable performance on the other. Finally, we report on ablation experiments that validate the components of the model. The code and videos from experiments can be found at https://mohammedalghamdi.github.io/talking-heads-acm-mm

cs.CV↗

arXiv2022

Functionally Reconfigurable Integrated Structure of Fabry-Perot Antenna and Wideband Liquid Absorber

This paper proposes a functionally reconfigurable integrated structure of a Fabry-Perot (FP) antenna and wideband liquid absorber. The partial reflecting surface (PRS) is elaborately tailored to serve as both a component of the FP antenna and the metal ground of the broadband liquid absorber. Then the integrated structure is realized by combining the FP antenna with the liquid absorber. The PRS is composed of patches on the top layer of the substrate and the square loop on the bottom and the microstrip patch antenna is used as a source. The liquid absorber is composed of a 3-D printed container, 45% ethanol layer, and a metal ground. By this design, the structure can serve as the FP antenna when the ethanol is extracted or the liquid absorber when the ethanol is injected. This can be used to switch between detection and stealth mode which can better adapt to the complex electromagnetic environment. The simulation results show that the gain of the antenna reaches to 19.7 dBi and the operating band is 100 MHz when the ethanol is extracted. When the ethanol is injected, the absorption band of the absorber ranges from 4 GHz to 20 GHz and the absorption bandwidth is over 133%. The monostatic RCS reduction bands of the structure with ethanol range from 4 GHz to 20GHz and the average RCS reduction is 28.4 dB. The measured and simulated results agree well.

physics.app-ph↗

arXiv2022

Design of Switchable Frequency-Selective Rasorber with A-R-A-T or A-T-A-R Operating Modes

This work presents a switchable frequency-selective rasorber (SFSR) with two operating modes. Switching from transmission to reflection can be achieved by appropriately adding feeders and PIN diodes based on cascaded two-dimensional lossy and lossless frequency-selective surface (FSS) screens. The proposed SFSR can realize out-of-band absorption. Analysis of the equivalent circuit model (ECM) can be useful for achieving a switchable rasorber. As the state of the PIN diodes changes, the working state of the SFSR can be switched from low-frequency reflection and high-frequency transmission to low-frequency transmission and high-frequency reflection, respectively. In the final-revision simulation of the working band of the SFSR, in the ON state, reflection and transmission peaks of -0.55 dB at 4.06 GHz and -0.52 dB at 5.97 GHz, respectively, are achieved; in the OFF state, the transmission and reflection peaks of -0.31 dB at 4.04GHz and -0.26 dB at 6.01 GHz, respectively, are obtained. A prototype sample is developed and validated. The results are in good agreement with those of the full-wave simulation. The proposed design can be used in intelligent anti-jamming communication.

physics.app-ph↗

arXiv2022

Efficient characterization of quantum nondemolition qubit readout

We study the quantitative characterization of the performance of qubit measurements in this paper. In particular, the back-action evading nature of quantum nondemolition (QND) readout of qubits is fully quantified by quantum trace distance. Only computational basis states are necessary to be taken into consideration. Most importantly, we propose an experimentally efficient method to evaluate the QND fidelity based on the classical trace distance, which uses an experimental scheme with two consecutive measurements. The three key quantifiers of a measurement, i.e., QND fidelity, readout fidelity, and projectivity, can be derived directly from the same experimental scheme. Besides, we present the relationships among these three factors. Theoretical simulation results for the dispersive readout of superconducting qubits show the validity of the proposed QND fidelity. Efficient quantification of measurement performance is of practical significance for the diagnosis, performance improvement, and design of measurement apparatuses.

quant-ph↗

arXiv2022

FishFuzz: Throwing Larger Nets to Catch Deeper Bugs

Greybox fuzzing is the de-facto standard to discover bugs during development. Fuzzers execute many inputs to maximize the amount of reached code. Recently, Directed Greybox Fuzzers (DGFs) propose an alternative strategy that goes beyond "just" coverage: driving testing toward specific code targets by selecting "closer" seeds. DGFs go through different phases: exploration (i.e., reaching interesting locations) and exploitation (i.e., triggering bugs). In practice, DGFs leverage coverage to directly measure exploration, while exploitation is, at best, measured indirectly by alternating between different targets. Specifically, we observe two limitations in existing DGFs: (i) they lack precision in their distance metric, i.e., averaging multiple paths and targets into a single score (to decide which seeds to prioritize), and (ii) they assign energy to seeds in a round-robin fashion without adjusting the priority of the targets (exhaustively explored targets should be dropped). We propose FishFuzz, which draws inspiration from trawl fishing: first casting a wide net, scraping for high coverage, then slowly pulling it in to maximize the harvest. The core of our fuzzer is a novel seed selection strategy that builds on two concepts: (i) a novel multi-distance metric whose precision is independent of the number of targets, and (ii) a dynamic target ranking to automatically discard exhausted targets. This strategy allows FishFuzz to seamlessly scale to tens of thousands of targets and dynamically alternate between exploration and exploitation phases. We evaluate FishFuzz by leveraging all sanitizer labels as targets. Extensively comparing FishFuzz against modern DGFs and coverage-guided fuzzers shows that FishFuzz reached higher coverage compared to the direct competitors, reproduces existing bugs (70.2% faster), and finally discovers 25 new bugs (18 CVEs) in 44 programs.

cs.CR↗

arXiv2022

Laguerre BV spaces, Laguerre perimeter and their applications

In this paper, we introduce the Laguerre bounded variation space and the Laguerre perimeter, thereby investigating their properties. Moreover, we prove the isoperimetric inequality and the Sobolev inequality in the Laguerre setting. As applications, we derive the mean curvature for the Laguerre perimeter.

math.FA↗

arXiv2022

Stable and Efficient Shapley Value-Based Reward Reallocation for Multi-Agent Reinforcement Learning of Autonomous Vehicles

With the development of sensing and communication technologies in networked cyber-physical systems (CPSs), multi-agent reinforcement learning (MARL)-based methodologies are integrated into the control process of physical systems and demonstrate prominent performance in a wide array of CPS domains, such as connected autonomous vehicles (CAVs). However, it remains challenging to mathematically characterize the improvement of the performance of CAVs with communication and cooperation capability. When each individual autonomous vehicle is originally self-interest, we can not assume that all agents would cooperate naturally during the training process. In this work, we propose to reallocate the system's total reward efficiently to motivate stable cooperation among autonomous vehicles. We formally define and quantify how to reallocate the system's total reward to each agent under the proposed transferable utility game, such that communication-based cooperation among multi-agents increases the system's total reward. We prove that Shapley value-based reward reallocation of MARL locates in the core if the transferable utility game is a convex game. Hence, the cooperation is stable and efficient and the agents should stay in the coalition or the cooperating group. We then propose a cooperative policy learning algorithm with Shapley value reward reallocation. In experiments, compared with several literature algorithms, we show the improvement of the mean episode system reward of CAV systems using our proposed algorithm.

cs.GT↗

arXiv2022

iPLAN: Interactive and Procedural Layout Planning

Layout design is ubiquitous in many applications, e.g. architecture/urban planning, etc, which involves a lengthy iterative design process. Recently, deep learning has been leveraged to automatically generate layouts via image generation, showing a huge potential to free designers from laborious routines. While automatic generation can greatly boost productivity, designer input is undoubtedly crucial. An ideal AI-aided design tool should automate repetitive routines, and meanwhile accept human guidance and provide smart/proactive suggestions. However, the capability of involving humans into the loop has been largely ignored in existing methods which are mostly end-to-end approaches. To this end, we propose a new human-in-the-loop generative model, iPLAN, which is capable of automatically generating layouts, but also interacting with designers throughout the whole procedure, enabling humans and AI to co-evolve a sketchy idea gradually into the final design. iPLAN is evaluated on diverse datasets and compared with existing methods. The results show that iPLAN has high fidelity in producing similar layouts to those from human designers, great flexibility in accepting designer inputs and providing design suggestions accordingly, and strong generalizability when facing unseen design tasks and limited training data.

cs.CV↗

arXiv2022

Underdetermined 2D-DOD and 2D-DOA Estimation for Bistatic Coprime EMVS-MIMO Radar: From the Difference Coarray Perspective

In this paper, the underdetermined 2D-DOD and 2D-DOA estimation for bistatic coprime EMVS-MIMO radar is considered. Firstly, a 5-D tensor model was constructed by using the multi-dimensional space-time characteristics of the received data. Then, an 8-D tensor has been obtained by using the auto-correlation calculation. To obtain the difference coarrays of transmit and receive EMVS, the de-coupling process between the spatial response of EMVS and the steering vector is inevitable. Thus, a new 6-D tensor can be constructed via the tensor permutation and the generalized tensorization of the canonical polyadic decomposition. {According} to the theory of the Tensor-Matrix Product operation, the duplicated elements in the difference coarrays can be removed by the utilization of two designed selection matrices. Due to the centrosymmetric geometry of the difference coarrays, two DFT beamspace matrices were subsequently designed to convert the complex steering matrices into the real-valued ones, whose advantage is to improve the estimation accuracy of the 2D-DODs and 2D-DOAs. Afterwards, a third-order tensor with the third-way fixed at 36 was constructed and the Parallel Factor algorithm was deployed, which can yield the closed-form automatically paired 2D-DOD and 2D-DOA estimation. The simulation results show that the proposed algorithm can exhibit superior estimation performance for the underdetermined 2D-DOD and 2D-DOA estimation.

eess.SP↗

arXiv2022

8D Parameters Estimation for Bistatic EMVS-MIMO Radar via the nested PARAFAC

In this letter, a novel nested PARAFAC algorithm was proposed to improve the 8D parameters estimation performance for the bistatic EMVS-MIMO radar. Firstly, the outer part PARAFAC algorithm was carried out to estimate the receive spatial response matrix and its first way factor matrix. For the estimated first way factor matrix, a theory is given to rearrange its data into an new matrix, which is the mode-1 unfolding matrix of a three-way tensor. Then, the inner part PARAFAC algorithm was used to estimate the transmit steering vector matrix, the transmit spatial response matrix and the receive steering vector matrix. Thus, the transmit 4D parameters and receive 4D parameters can be accurately located via the abovementioned process. Compared with the original PARAFAC algorithm, the proposed nested PARAFAC algorithm can avoid additional reconstruction process when estimating the transmit/receive spatial response matrix. Moreover, the proposed algorithm can offer a highly-accurate 8D parameters estimaiton than that of the original PARAFAC algorithm. Simulated results verify the effectiveness of the proposed algorithm.

eess.SP↗

arXiv2022

Formation Control for UAVs Using a Flux Guided Approach

Existing studies on formation control for unmanned aerial vehicles (UAV) have not considered encircling targets where an optimum coverage of the target is required at all times. Such coverage plays a critical role in many real-world applications such as tracking hostile UAVs. This paper proposes a new path planning approach called the Flux Guided (FG) method, which generates collision-free trajectories for multiple UAVs while maximising the coverage of target(s). Our method enables UAVs to track directly toward a target whilst maintaining maximum coverage. Furthermore, multiple scattered targets can be tracked by scaling the formation during flight. FG is highly scalable since it only requires communication between sub-set of UAVs on the open boundary of the formation's surface. Experimental results further validate that FG generates UAV trajectories $1.5 \times$ shorter than previous work and that trajectory planning for 9 leader/follower UAVs to surround a target in two different scenarios only requires 0.52 seconds and 0.88 seconds, respectively. The resulting trajectories are suitable for robotic controls after time-optimal parameterisation; we demonstrate this using a 3d dynamic particle system that tracks the desired trajectories using a PID controller.

cs.RO↗

arXiv2022

Deep Reinforcement Learning Coordinated Receiver Beamforming for Millimeter-Wave Train-ground Communications

As more and more people choose high-speed rail (HSR) as a means of transportation for short trips, there is ever growing demand of high quality of multimedia services. With its rich spectrum resources, millimeter wave (mm-wave) communications can satisfy the high network capacity requirements for HSR. Also, it is possible for receivers (RXs) to be equipped with antenna arrays in mm-wave communication systems due to its short wavelength. However, as HSRs run with high speed, the received signal power (RSP) varies rapidly over a cell and it is the lowest at the edge of the cell compared to other locations. Consequently, it is necessary to conduct research on RX beamforming for HSR in mm-wave band to improve the quality of the received signal. In this paper, we focus on RX beamforming for a mm-wave train-ground communication system. To improve the RSP, we propose an effective RX beamforming scheme based on deep reinforcement learning (DRL), and develop a deep Q-network (DQN) algorithm to train and determine the optimal RX beam direction with the purpose of maximizing average RSP. Through extensive simulations, we demonstrate that the proposed scheme has better performance than the four baseline schemes in terms of average RSP at most positions on the railway.

cs.IT↗