arXiv subjects

Hartmut Kaiser

Publications and source records attributed to Hartmut Kaiser.

At least 19 recordsLinked to original sources

arXiv2026

StormNet: Improving storm surge predictions with a GNN-based spatio-temporal offset forecasting model

Storm surge forecasting remains a critical challenge in mitigating the impacts of tropical cyclones on coastal regions, particularly given recent trends of rapid intensification and increasing nearshore storm activity. Traditional high fidelity numerical models such as ADCIRC, while robust, are often hindered by inevitable uncertainties arising from various sources. To address these challenges, this study introduces StormNet, a spatio-temporal graph neural network (GNN) designed for bias correction of storm surge forecasts. StormNet integrates graph convolutional (GCN) and graph attention (GAT) mechanisms with long short-term memory (LSTM) components to capture complex spatial and temporal dependencies among water-level gauge stations. The model was trained using historical hurricane data from the U.S. Gulf Coast and evaluated on Hurricane Idalia (2023). Results demonstrate that StormNet can effectively reduce the root mean square error (RMSE) in water-level predictions by more than 70\% for 48-hour forecasts and above 50\% for 72-hour forecasts, as well as outperform a sequential LSTM baseline, particularly for longer prediction horizons. The model also exhibits low training time, enhancing its applicability in real-time operational forecasting systems. Overall, StormNet provides a computationally efficient and physically meaningful framework for improving storm surge prediction accuracy and reliability during extreme weather events.

cs.LG↗

arXiv2026

Radiation Hydrodynamics at Scale: Comparing MPI and Asynchronous Many-Task Runtimes with FleCSI

Writing efficient distributed code remains a labor-intensive and complex endeavor. To simplify application development, the Flexible Computational Science Infrastructure (FleCSI) framework offers a user-oriented, high-level programming interface that is built upon a task-based runtime model. Internally, FleCSI integrates state-of-the-art parallelization backends, including MPI and the asynchronous many-task runtimes (AMTRs) Legion and HPX, enabling applications to fully leverage asynchronous parallelism. In this work, we benchmark two applications using FleCSI's three backends on up to 1024 nodes, intending to quantify the advantages and overheads introduced by the AMTR backends. As representative applications, we select a simple Poisson solver and the multidimensional radiation hydrodynamics code HARD. In the communication-focused Poisson solver benchmark, FleCSI achieves over 97% parallel efficiency using the MPI backend under weak scaling on up to 131072 cores, indicating that only minimal overhead is introduced by its abstraction layer. While the Legion backend exhibits notable overheads and scaling limitations, the HPX backend introduces only marginal overhead compared to MPI+Kokkos. However, the scalability of the HPX backend is currently limited due to the usage of non-optimized HPX collective operations. In the computation-focused radiation hydrodynamics benchmarks, the performance gap between the MPI and HPX backends fades. On fewer than 64 nodes, the HPX backend outperforms MPI+Kokkos, achieving an average speedup of 1.31 under weak scaling and up to 1.27 under strong scaling. For the hydrodynamics-only HARD benchmark, the HPX backend demonstrates superior performance on fewer than 32 nodes, achieving speedups of up to 1.20 relative to MPI and up to 1.64 relative to MPI+Kokkos.

cs.DC↗

arXiv2026

Overcoming Latency-bound Limitations of Distributed Graph Algorithms using the HPX Runtime System

Graph processing at scale presents many challenges, including the irregular structure of graphs, the latency-bound nature of graph algorithms, and the overhead associated with distributed execution. While existing frameworks such as Spark GraphX and the Parallel Boost Graph Library (PBGL) have introduced abstractions for distributed graph processing, they continue to struggle with inherent issues like load imbalance and synchronization overhead. In this work, we present a distributed library prototype and a distributed implementation of three key graph algorithms - Breadth-First Search (BFS), PageRank, and Triangle Counting, using C++ mechanisms from the NWgraph library and leveraging HPX's distributed containers and asynchronous constructs. These algorithms span the categories of Traversal, centrality, and Pattern matching, and are selected to represent diverse computational characteristics. We evaluate our HPX-based implementations against GraphX, and PBGL, showing that a high-performance runtime such as HPX enables the construction of algorithms that significantly outperform conventional frameworks by exploiting asynchronous execution, latency hiding, and fine-grained parallelism in shared memory. All algorithms in our prototype follow a unified execution model in which local and remote computations are expressed using the same programming abstractions, with asynchrony managed transparently by the runtime. This design explicitly leverages shared-memory parallelism within each locality while overlapping communication and computation across localities, providing a practical foundation for extending this approach to a broader class of distributed graph algorithms.

cs.DC↗

arXiv2026

HURRI-GAN: A Novel Approach for Hurricane Bias-Correction Beyond Gauge Stations using Generative Adversarial Networks

The coastal regions of the eastern and southern United States are impacted by severe storm events, leading to significant loss of life and properties. Accurately forecasting storm surge and wind impacts from hurricanes is essential for mitigating some of the impacts, e.g., timely preparation of evacuations and other countermeasures. Physical simulation models like the ADCIRC hydrodynamics model, which run on high-performance computing resources, are sophisticated tools that produce increasingly accurate forecasts as the resolution of the computational meshes improves. However, a major drawback of these models is the significant time required to generate results at very high resolutions, which may not meet the near real-time demands of emergency responders. The presented work introduces HURRI-GAN, a novel AI-driven approach that augments the results produced by physical simulation models using time series generative adversarial networks (TimeGAN) to compensate for systemic errors of the physical model, thus reducing the necessary mesh size and runtime without loss in forecasting accuracy. We present first results in extrapolating model bias corrections for the spatial regions beyond the positions of the water level gauge stations. The presented results show that our methodology can accurately generate bias corrections at target locations spatially beyond gauge stations locations. The model's performance, as indicated by low root mean squared error (RMSE) values, highlights its capability to generate accurate extrapolated data. Applying the corrections generated by HURRI-GAN on the ADCIRC modeled water levels resulted in improving the overall prediction on the majority of the testing gauge stations.

cs.LG↗

arXiv2026

An Initial Evaluation of Distributed Graph Algorithms using NWGraph and HPX

Graphs are central to modeling relationships in scientific computing, data analysis, and AI/ML, but their growing scale can exceed the memory and compute capacity of single nodes, requiring distributed solutions. Existing distributed graph framework, however, face fundamental challenges: graph algorithms are latency-bound, suffer from irregular memory access, and often impose synchronization costs that limit scalability and efficiency. In this work, we present a distributed implementation of the NWGraph library integrated with the HPX runtime system. By leveraging HPX's asynchronous many-task model, our approach aims to reduce synchronization overhead, improve load balance, and provide a foundation for distributed graph analytics. We evaluate this approach using two representative algorithms: Breadth-First-Search (BFS) and (PageRank). Our initial results show that BFS achieves better performance than the distributed Boost Graph Library (BGL), while PageRank remains more challenging, with current implementation not yet outperforming BGL. These findings highlight both the promise and the open challenges of applying asynchronous task-based runtimes to graph processing, and point to opportunities for future optimizations and extensions.

cs.DC↗

arXiv2025

A New Execution Model and Executor for Adaptively Optimizing the Performance of Parallel Algorithms Using HPX Runtime System

Developing parallel algorithms efficiently requires careful management of concurrency across diverse hardware architectures. C++ executors provide a standardized interface that simplifies the development process, allowing developers to write portable and uniform code. However, in some cases, they may not fully leverage hardware capabilities or optimally allocate resources for specific workloads, leading to potential performance inefficiencies. Building on our earlier conference paper [ Adaptively Optimizing the Performance of HPX's Parallel algorithms], which introduces a preliminary strategy based on cores and chunking (workload), and integrated it into HPX's executor API, that dynamically optimizes for workload distribution and resource allocation, based on runtime metrics and overheads, this paper, introduces a more detailed model of that strategy. It evaluates the efficiency of this implementation (as an HPX executor) across a wide range of compute-bound and memory-bound workloads on different architectures and with different algorithms. The results show consistent speedups across all tests, configurations, and workloads studied, offering improved performance through a familiar and user-friendly c++ executors API. Additionally, the paper highlights how runtime-driven executor adaptation can simplify performance optimization without increasing the complexity of algorithm development.

cs.DC↗

arXiv2025

Understanding the Communication Needs of Asynchronous Many-Task Systems -- A Case Study of HPX+LCI

Asynchronous Many-Task (AMT) systems offer a potential solution for efficiently programming complicated scientific applications on extreme-scale heterogeneous architectures. However, they exhibit different communication needs from traditional bulk-synchronous parallel (BSP) applications, posing new challenges for underlying communication libraries. This work systematically studies the communication needs of AMTs and explores how communication libraries can be structured to better satisfy them through a case study of a real-world AMT system, HPX. We first examine its communication stack layout and formalize the communication abstraction that underlying communication libraries need to support. We then analyze its current MPI backend (parcelport) and identify four categories of needs that are not typical in the BSP model and are not well covered by the MPI standard. To bridge these gaps, we design from the native network layer and incorporate various techniques, including one-sided communication, queue-based completion notification, explicit progressing, and different ways of resource contention mitigation, in a new parcelport with an experimental communication library, LCI. Overall, the resulting LCI parcelport outperforms the existing MPI parcelport with up to 50x in microbenchmarks and 2x in a real-world application. Using it as a testbed, we design LCI parcelport variants to quantify the performance contributions of each technique. This work combines conceptual analysis and experiment results to offer a practical guideline for the future development of communication libraries and AMT communication layers.

cs.DC↗

arXiv2025

LLM & HPC:Benchmarking DeepSeek's Performance in High-Performance Computing Tasks

Large Language Models (LLMs), such as GPT-4 and DeepSeek, have been applied to a wide range of domains in software engineering. However, their potential in the context of High-Performance Computing (HPC) much remains to be explored. This paper evaluates how well DeepSeek, a recent LLM, performs in generating a set of HPC benchmark codes: a conjugate gradient solver, the parallel heat equation, parallel matrix multiplication, DGEMM, and the STREAM triad operation. We analyze DeepSeek's code generation capabilities for traditional HPC languages like Cpp, Fortran, Julia and Python. The evaluation includes testing for code correctness, performance, and scaling across different configurations and matrix sizes. We also provide a detailed comparison between DeepSeek and another widely used tool: GPT-4. Our results demonstrate that while DeepSeek generates functional code for HPC tasks, it lags behind GPT-4, in terms of scalability and execution efficiency of the generated code.

cs.DC↗

arXiv2025

Closing a Source Complexity Gap between Chapel and HPX

A previous case study measured performance vs source-code complexity across multiple languages. The case study identified Chapel and HPX provide similar performance and code complexity. This paper is the result of initial steps toward closing the source-code complexity gap between Chapel and HPX by using a source-to-source compiler. The investigation assesses the single-machine performance of both Chapel and Chplx applications across Arm and x86.

cs.DC↗

arXiv2024

Asynchronous-Many-Task Systems: Challenges and Opportunities -- Scaling an AMR Astrophysics Code on Exascale machines using Kokkos and HPX

Dynamic and adaptive mesh refinement is pivotal in high-resolution, multi-physics, multi-model simulations, necessitating precise physics resolution in localized areas across expansive domains. Today's supercomputers' extreme heterogeneity presents a significant challenge for dynamically adaptive codes, highlighting the importance of achieving performance portability at scale. Our research focuses on astrophysical simulations, particularly stellar mergers, to elucidate early universe dynamics. We present Octo-Tiger, leveraging Kokkos, HPX, and SIMD for portable performance at scale in complex, massively parallel adaptive multi-physics simulations. Octo-Tiger supports diverse processors, accelerators, and network backends. Experiments demonstrate exceptional scalability across several heterogeneous supercomputers including Perlmutter, Frontier, and Fugaku, encompassing major GPU architectures and x86, ARM, and RISC-V CPUs. Parallel efficiency of 47.59% (110,080 cores and 6880 hybrid A100 GPUs) on a full-system run on Perlmutter (26% HPCG peak performance) and 51.37% (using 32,768 cores and 2,048 MI250X) on Frontier are achieved.

cs.DC↗

arXiv2024

Evaluating AI-generated code for C++, Fortran, Go, Java, Julia, Matlab, Python, R, and Rust

This study evaluates the capabilities of ChatGPT versions 3.5 and 4 in generating code across a diverse range of programming languages. Our objective is to assess the effectiveness of these AI models for generating scientific programs. To this end, we asked ChatGPT to generate three distinct codes: a simple numerical integration, a conjugate gradient solver, and a parallel 1D stencil-based heat equation solver. The focus of our analysis was on the compilation, runtime performance, and accuracy of the codes. While both versions of ChatGPT successfully created codes that compiled and ran (with some help), some languages were easier for the AI to use than others (possibly because of the size of the training sets used). Parallel codes -- even the simple example we chose to study here -- also difficult for the AI to generate correctly.

cs.SE↗

arXiv2024

Preparing for HPC on RISC-V: Examining Vectorization and Distributed Performance of an Astrophyiscs Application with HPX and Kokkos

In recent years, interest in RISC-V computing architectures has moved from academic to mainstream, especially in the field of High Performance Computing where energy limitations are increasingly a concern. As of this year, the first single board RISC-V CPUs implementing the finalized ratified vector specification are being released. The RISC-V vector specification follows in the tradition of vector processors found in the CDC STAR-100, the Cray-1, the Convex C-Series, and the NEC SX machines and accelerators. The family of vector processors offers support for variable-length array processing as opposed to the fixed-length processing functionality offered by SIMD. Vector processors offer opportunities to perform vector-chaining which allows temporary results to be used without the need to resolve memory references. In this work, we use the Octo-Tiger multi-physics, multi-scale, 3D adaptive mesh refinement astrophysics application to study these early RISC-V chips with vector machine support. We report on our experience in porting this modern C++ code (which is built upon several open-source libraries such as HPX and Kokkos) to RISC-V. In addition, we show the impact of the RISC-V Vector extension on a RISC-V single board computer by implementing the std::experimental:simd interface and integrating it with our code. We also compare the application's performance, scalability, and power consumption on desktop-grade RISC-V computer to an A64FX system.

cs.DC↗

arXiv2024

Hydrodynamic simulations of WD-WD mergers and the origin of RCB stars

We study the properties of double white dwarf (DWD) mergers by performing hydrodynamic simulations using the new and improved adaptive mesh refinement code Octo-Tiger. We follow the orbital evolution of DWD systems of mass ratio q=0.7 for tens of orbits until and after the merger to investigate them as a possible origin for R Coronae Borealis (RCB) type stars. We reproduce previous results, finding that during the merger, the Helium WD donor star is tidally disrupted within 20-80 minutes since the beginning of the simulation onto the accretor Carbon-Oxygen WD, creating a high temperature shell around the accretor. We investigate the possible Helium burning in this shell and the merged object's general structure. Specifically, we are interested in the amount of Oxygen-16 dredged-up to the hot shell and the amount of Oxygen-18 produced. This is critical as the discovery of very low Oxygen-16 to Oxygen-18 ratios in RCB stars pointed out the merger scenario as a favorable explanation for their origin. A small amount of hydrogen in the donor may help keep the Oxygen-16 to Oxygen-18 ratios within observational bounds, even if moderate dredge-up from the accretor occurs. In addition, we perform a resolution study to reconcile the difference found in the amount of Oxygen-16 dredge-up between smoothed-particle hydrodynamics and grid-based simulations.

astro-ph.SR↗

arXiv2024

Storm Surge Modeling in the AI ERA: Using LSTM-based Machine Learning for Enhancing Forecasting Accuracy

Physics simulation results of natural processes usually do not fully capture the real world. This is caused for instance by limits in what physical processes are simulated and to what accuracy. In this work we propose and analyze the use of an LSTM-based deep learning network machine learning (ML) architecture for capturing and predicting the behavior of the systemic error for storm surge forecast models with respect to real-world water height observations from gauge stations during hurricane events. The overall goal of this work is to predict the systemic error of the physics model and use it to improve the accuracy of the simulation results post factum. We trained our proposed ML model on a dataset of 61 historical storms in the coastal regions of the U.S. and we tested its performance in bias correcting modeled water level data predictions from hurricane Ian (2022). We show that our model can consistently improve the forecasting accuracy for hurricane Ian -- unknown to the ML model -- at all gauge station coordinates used for the initial data. Moreover, by examining the impact of using different subsets of the initial training dataset, containing a number of relatively similar or different hurricanes in terms of hurricane track, we found that we can obtain similar quality of bias correction by only using a subset of six hurricanes. This is an important result that implies the possibility to apply a pre-trained ML model to real-time hurricane forecasting results with the goal of bias correcting and improving the produced simulation accuracy. The presented work is an important first step in creating a bias correction system for real-time storm surge forecasting applicable to the full simulation area. It also presents a highly transferable and operationally applicable methodology for improving the accuracy in a wide range of physics simulation scenarios beyond storm surge forecasting.

cs.LG↗

arXiv2024

HPX with Spack and Singularity Containers: Evaluating Overheads for HPX/Kokkos using an astrophysics application

Cloud computing for high performance computing resources is an emerging topic. This service is of interest to researchers who care about reproducible computing, for software packages with complex installations, and for companies or researchers who need the compute resources only occasionally or do not want to run and maintain a supercomputer on their own. The connection between HPC and containers is exemplified by the fact that Microsoft Azure's Eagle cloud service machine is number three on the November 23 Top 500 list. For cloud services, the HPC application and dependencies are installed in containers, e.g. Docker, Singularity, or something else, and these containers are executed on the physical hardware. Although containerization leverages the existing Linux kernel and should not impose overheads on the computation, there is the possibility that machine-specific optimizations might be lost, particularly machine-specific installs of commonly used packages. In this paper, we will use an astrophysics application using HPX-Kokkos and measure overheads on homogeneous resources, e.g. Supercomputer Fugaku, using CPUs only and on heterogenous resources, e.g. LSU's hybrid CPU and GPU system. We will report on challenges in compiling, running, and using the containers as well as performance performance differences.

cs.DC↗

arXiv2023

Evaluating HPX and Kokkos on RISC-V using an Astrophysics Application Octo-Tiger

In recent years, computers based on the RISC-V architecture have raised broad interest in the high-performance computing (HPC) community. As the RISC-V community develops the core instruction set architecture (ISA) along with ISA extensions, the HPC community has been actively ensuring HPC applications and environments are supported. In this context, assessing the performance of asynchronous many-task runtime systems (AMT) is essential. In this paper, we describe our experience with porting of a full 3D adaptive mesh-refinement, multi-scale, multi-model, and multi-physics application, Octo-Tiger, that is based on the HPX AMT, and we explore its performance characteristics on different RISC-V systems. Considering the (limited) capabilities of the RISC-V test systems we used, Octo-Tiger already shows promising results and good scaling. We, however, expect that exceptional hardware support based on dedicated ISA extensions (such as single-cycle context switches, extended atomic operations, and direct support for HPX's global address space) would allow for even better performance results.

cs.DC↗

arXiv2023

HPX -- An open source C++ Standard Library for Parallelism and Concurrency

To achieve scalability with today's heterogeneous HPC resources, we need a dramatic shift in our thinking; MPI+X is not enough. Asynchronous Many Task (AMT) runtime systems break down the global barriers imposed by the Bulk Synchronous Programming model. HPX is an open-source, C++ Standards compliant AMT runtime system that is developed by a diverse international community of collaborators called The Ste||ar Group. HPX provides features which allow application developers to naturally use key design patterns, such as overlapping communication and computation, decentralizing of control flow, oversubscribing execution resources and sending work to data instead of data to work. The Ste||ar Group comprises physicists, engineers, and computer scientists; men and women from many different institutions and affiliations, and over a dozen different countries. We are committed to advancing the development of scalable parallel applications by providing a platform for collaborating and exchanging ideas. In this paper, we give a detailed description of the features HPX provides and how they help achieve scalability and programmability, a list of applications of HPX including two large NSF funded collaborations (STORM, for storm surge forecasting; and STAR (OctoTiger) an astro-physics project which runs at 96.8% parallel efficiency on 643,280 cores), and we end with a description of how HPX and the Ste||ar Group fit into the open source community.

cs.DC↗

arXiv2023

Benchmarking the Parallel 1D Heat Equation Solver in Chapel, Charm++, C++, HPX, Go, Julia, Python, Rust, Swift, and Java

Many scientific high performance codes that simulate e.g. black holes, coastal waves, climate and weather, etc. rely on block-structured meshes and use finite differencing methods to iteratively solve the appropriate systems of differential equations. In this paper we investigate implementations of an extremely simple simulation of this type using various programming systems and languages. We focus on a shared memory, parallelized algorithm that simulates a 1D heat diffusion using asynchronous queues for the ghost zone exchange. We discuss the advantages of the various platforms and explore the performance of this model code on different computing architectures: Intel, AMD, and ARM64FX. As a result, Python was the slowest of the set we compared. Java, Go, Swift, and Julia were the intermediate performers. The higher performing platforms were C++, Rust, Chapel, Charm++, and HPX.

cs.DC↗