arXiv subjects

Harsh Sharma

Publications and source records attributed to Harsh Sharma.

At least 37 records · Page 2Linked to original sources

arXiv2025

ThematicPlane: Bridging Tacit User Intent and Latent Spaces for Image Generation

Generative AI has made image creation more accessible, yet aligning outputs with nuanced creative intent remains challenging, particularly for non-experts. Existing tools often require users to externalize ideas through prompts or references, limiting fluid exploration. We introduce ThematicPlane, a system that enables users to navigate and manipulate high-level semantic concepts (e.g., mood, style, or narrative tone) within an interactive thematic design plane. This interface bridges the gap between tacit creative intent and system control. In our exploratory study (N=6), participants engaged in divergent and convergent creative modes, often embracing unexpected results as inspiration or iteration cues. While they grounded their exploration in familiar themes, differing expectations of how themes mapped to outputs revealed a need for more explainable controls. Overall, ThematicPlane fosters expressive, iterative workflows and highlights new directions for intuitive, semantics-driven interaction in generative design tools.

cs.HC↗

arXiv2025

Designing High-Performance and Thermally Feasible Multi-Chiplet Architectures enabled by Non-bendable Glass Interposer

Multi-chiplet architectures enabled by glass interposer offer superior electrical performance, enable higher bus widths due to reduced crosstalk, and have lower capacitance in the redistribution layer than current silicon interposer-based systems. These advantages result in lower energy per bit, higher communication frequencies, and extended interconnect range. However, deformation of the package (warpage) in glass interposer-based systems becomes a critical challenge as system size increases, leading to severe mechanical stress and reliability concerns. Beyond a certain size, conventional packaging techniques fail to manage warpage effectively, necessitating new approaches to mitigate warpage induced bending with scalable performance for glass interposer based multi-chiplet systems. To address these inter-twined challenges, we propose a thermal-, warpage-, and performance-aware design framework that employs architecture and packaging co-optimization. The proposed framework disintegrates the surface and embedded chiplets to balance conflicting design objectives, ensuring optimal trade-offs between performance, power, and structural reliability. Our experiments demonstrate that optimized multi-chiplet architectures from our design framework achieve up to 64.7% performance improvement and 40% power reduction compared to traditional 2.5D systems to execute deep neural network workloads with lower fabrication costs.

cs.AR↗

arXiv2025

Beyond Sensor Data: Foundation Models of Behavioral Data from Wearables Improve Health Predictions

Wearable devices record physiological and behavioral signals that can improve health predictions. While foundation models are increasingly used for such predictions, they have been primarily applied to low-level sensor data, despite behavioral data often being more informative due to their alignment with physiologically relevant timescales and quantities. We develop foundation models of such behavioral signals using over 2.5B hours of wearable data from 162K individuals, systematically optimizing architectures and tokenization strategies for this unique dataset. Evaluated on 57 health-related tasks, our model shows strong performance across diverse real-world applications including individual-level classification and time-varying health state prediction. The model excels in behavior-driven tasks like sleep prediction, and improves further when combined with representations of raw sensor data. These results underscore the importance of tailoring foundation model design to wearables and demonstrate the potential to enable new health applications.

cs.LG↗

arXiv2025

Protecting information in a parametrically driven hybrid quantum system

The transfer and storage of quantum information in a hybrid quantum system, consisting of an ensemble of atoms or spins interacting with a cavity, is adversely affected by the inhomogeneity of the spins, which negates the coherent exchange of excitations between the physical components. Using a full quantum treatment based on variational renormalization group, we show how quantum information encoded in the states of a parametrically driven hybrid system is strongly protected against any decoherence that may arise due to the inhomogeneity in the spin-ensemble.

quant-ph↗

arXiv2025

MFIT: Multi-Fidelity Thermal Modeling for 2.5D and 3D Multi-Chiplet Architectures

Rapidly evolving artificial intelligence and machine learning applications require ever-increasing computational capabilities, while monolithic 2D design technologies approach their limits. Heterogeneous integration of smaller chiplets using a 2.5D silicon interposer and 3D packaging has emerged as a promising paradigm to address this limit and meet performance demands. These approaches offer a significant cost reduction and higher manufacturing yield than monolithic 2D integrated circuits. However, the compact arrangement and high compute density exacerbate the thermal management challenges, potentially compromising performance. Addressing these thermal modeling challenges is critical, especially as system sizes grow and different design stages require varying levels of accuracy and speed. Since no single thermal modeling technique meets all these needs, this paper introduces MFIT, a range of multi-fidelity thermal models that effectively balance accuracy and speed. These multi-fidelity models can enable efficient design space exploration and runtime thermal management. Our extensive testing on systems with 16, 36, and 64 2.5D integrated chiplets and 16x3 3D integrated chiplets demonstrates that these models can reduce execution times from days to mere seconds and milliseconds with negligible loss in accuracy.

cs.AR↗

arXiv2025

Team ACK at SemEval-2025 Task 2: Beyond Word-for-Word Machine Translation for English-Korean Pairs

Translating knowledge-intensive and entity-rich text between English and Korean requires transcreation to preserve language-specific and cultural nuances beyond literal, phonetic or word-for-word conversion. We evaluate 13 models (LLMs and MT models) using automatic metrics and human assessment by bilingual annotators. Our findings show LLMs outperform traditional MT systems but struggle with entity translation requiring cultural adaptation. By constructing an error taxonomy, we identify incorrect responses and entity name errors as key issues, with performance varying by entity type and popularity level. This work exposes gaps in automatic evaluation metrics and hope to enable future work in completing culturally-nuanced machine translation.

cs.CL↗

arXiv2025

A Heterogeneous Chiplet Architecture for Accelerating End-to-End Transformer Models

Transformers have revolutionized deep learning and generative modeling, enabling advancements in natural language processing tasks. However, the size of transformer models is increasing continuously, driven by enhanced capabilities across various deep learning tasks. This trend of ever-increasing model size has given rise to new challenges in terms of memory and compute requirements. Conventional computing platforms, including GPUs, suffer from suboptimal performance due to the memory demands imposed by models with millions/billions of parameters. The emerging chiplet-based platforms provide a new avenue for compute- and data-intensive machine learning (ML) applications enabled by a Network-on-Interposer (NoI). However, designing suitable hardware accelerators for executing Transformer inference workloads is challenging due to a wide variety of complex computing kernels in the Transformer architecture. In this paper, we leverage chiplet-based heterogeneous integration (HI) to design a high-performance and energy-efficient multi-chiplet platform to accelerate transformer workloads. We demonstrate that the proposed NoI architecture caters to the data access patterns inherent in a transformer model. The optimized placement of the chiplets and the associated NoI links and routers enable superior performance compared to the state-of-the-art hardware accelerators. The proposed NoI-based architecture demonstrates scalability across varying transformer models and improves latency and energy efficiency by up to 11.8x and 2.36x, respectively when compared with the existing state-of-the-art architecture HAIMA.

cs.AR↗

arXiv2024

Bayesian identification of nonseparable Hamiltonians with multiplicative noise using deep learning and reduced-order modeling

This paper presents a structure-preserving Bayesian approach for learning nonseparable Hamiltonian systems using stochastic dynamic models allowing for statistically-dependent, vector-valued additive and multiplicative measurement noise. The approach is comprised of three main facets. First, we derive a Gaussian filter for a statistically-dependent, vector-valued, additive and multiplicative noise model that is needed to evaluate the likelihood within the Bayesian posterior. Second, we develop a novel algorithm for cost-effective application of Bayesian system identification to high-dimensional systems. Third, we demonstrate how structure-preserving methods can be incorporated into the proposed framework, using nonseparable Hamiltonians as an illustrative system class. We assess the method's performance based on the forecasting accuracy of a model estimated from single-trajectory data. We compare the Bayesian method to a state-of-the-art machine learning method on a canonical nonseparable Hamiltonian model and a chaotic double pendulum model with small, noisy training datasets. The results show that using the Bayesian posterior as a training objective can yield upwards of 724 times improvement in Hamiltonian mean squared error using training data with up to 10% multiplicative noise compared to a standard training objective. Lastly, we demonstrate the utility of the novel algorithm for parameter estimation of a 64-dimensional model of the spatially-discretized nonlinear Schrödinger equation with data corrupted by up to 20% multiplicative noise.

stat.ML↗

arXiv2024

Data-driven Model Reduction for Soft Robots via Lagrangian Operator Inference

Data-driven model reduction methods provide a nonintrusive way of constructing computationally efficient surrogates of high-fidelity models for real-time control of soft robots. This work leverages the Lagrangian nature of the model equations to derive structure-preserving linear reduced-order models via Lagrangian Operator Inference and compares their performance with prominent linear model reduction techniques through an anguilliform swimming soft robot model example with 231,336 degrees of freedom. The case studies demonstrate that preserving the underlying Lagrangian structure leads to learned models with higher predictive accuracy and robustness to unseen inputs.

cs.RO↗

arXiv2024

Improving Performance of Quantum Heat Engines using modified Otto cycle

The efficiency of a quantum heat engine is maximum when the unitary strokes are adiabatic. On the other hand, this may not be always possible due to small energy gaps in the system, especially at the critical point where the gap vanishes. With the aim to achieve this adiabaticity, we modify one of the unitary strokes of the cycle by allowing the system to evolve freely with a particular Hamiltonian till a time so that the system reaches a less excited state. This will help in increasing the magnitude of the heat absorbed from the hot bath so that the work output and efficiency of the engine can be increased. We demonstrate this method using an integrable model and a non-integrable model as the working medium. In the case of a two spin system, the optimal value for the time till which the system needs to be freely evolved is calculated analytically in the adiabatic limit. The results show that implementing this modified stroke significantly improves the work output and efficiency of the engine, especially when it crosses the critical point.

quant-ph↗

arXiv2024

Lagrangian operator inference enhanced with structure-preserving machine learning for nonintrusive model reduction of mechanical systems

Complex mechanical systems often exhibit strongly nonlinear behavior due to the presence of nonlinearities in the energy dissipation mechanisms, material constitutive relationships, or geometric/connectivity mechanics. Numerical modeling of these systems leads to nonlinear full-order models that possess an underlying Lagrangian structure. This work proposes a Lagrangian operator inference method enhanced with structure-preserving machine learning to learn nonlinear reduced-order models (ROMs) of nonlinear mechanical systems. This two-step approach first learns the best-fit linear Lagrangian ROM via Lagrangian operator inference and then presents a structure-preserving machine learning method to learn nonlinearities in the reduced space. The proposed approach can learn a structure-preserving nonlinear ROM purely from data, unlike the existing operator inference approaches that require knowledge about the mathematical form of nonlinear terms. From a machine learning perspective, it accelerates the training of the structure-preserving neural network by providing an informed prior, and it reduces the computational cost of the network training by operating on the reduced space. The method is first demonstrated on two simulated examples: a conservative nonlinear rod model and a two-dimensional nonlinear membrane with nonlinear internal damping. Finally, the method is demonstrated on an experimental dataset consisting of digital image correlation measurements taken from a lap-joint beam structure from which a predictive model is learned that captures amplitude-dependent frequency and damping characteristics accurately. The numerical results demonstrate that the proposed approach yields generalizable nonlinear ROMs that exhibit bounded energy error, capture the nonlinear characteristics reliably, and provide accurate long-time predictions outside the training data regime.

cs.CE↗

arXiv2024

Preserving Lagrangian structure in data-driven reduced-order modeling of large-scale dynamical systems

This work presents a nonintrusive physics-preserving method to learn reduced-order models (ROMs) of Lagrangian systems, which includes nonlinear wave equations. Existing intrusive projection-based model reduction approaches construct structure-preserving Lagrangian ROMs by projecting the Euler-Lagrange equations of the full-order model (FOM) onto a linear subspace. This Galerkin projection step requires complete knowledge about the Lagrangian operators in the FOM and full access to manipulate the computer code. In contrast, the proposed Lagrangian operator inference approach embeds the mechanics into the operator inference framework to develop a data-driven model reduction method that preserves the underlying Lagrangian structure. The proposed approach exploits knowledge of the governing equations (but not their discretization) to define the form and parametrization of a Lagrangian ROM which can then be learned from projected snapshot data. The method does not require access to FOM operators or computer code. The numerical results demonstrate Lagrangian operator inference on an Euler-Bernoulli beam model, the sine-Gordon (nonlinear) wave equation, and a large-scale discretization of a soft robot fishtail with 779,232 degrees of freedom. The learned Lagrangian ROMs generalize well, as they can accurately predict the physical solutions both far outside the training time interval, as well as for unseen initial conditions.

math.NA↗

arXiv2024

Dataflow-Aware PIM-Enabled Manycore Architecture for Deep Learning Workloads

Processing-in-memory (PIM) has emerged as an enabler for the energy-efficient and high-performance acceleration of deep learning (DL) workloads. Resistive random-access memory (ReRAM) is one of the most promising technologies to implement PIM. However, as the complexity of Deep convolutional neural networks (DNNs) grows, we need to design a manycore architecture with multiple ReRAM-based processing elements (PEs) on a single chip. Existing PIM-based architectures mostly focus on computation while ignoring the role of communication. ReRAM-based tiled manycore architectures often involve many Processing Elements (PEs), which need to be interconnected via an efficient on-chip communication infrastructure. Simply allocating more resources (ReRAMs) to speed up only computation is ineffective if the communication infrastructure cannot keep up with it. In this paper, we highlight the design principles of a dataflow-aware PIM-enabled manycore platform tailor-made for various types of DL workloads. We consider the design challenges with both 2.5D interposer- and 3D integration-enabled architectures.

cs.AR↗

arXiv2023

Symplectic model reduction of Hamiltonian systems using data-driven quadratic manifolds

This work presents two novel approaches for the symplectic model reduction of high-dimensional Hamiltonian systems using data-driven quadratic manifolds. Classical symplectic model reduction approaches employ linear symplectic subspaces for representing the high-dimensional system states in a reduced-dimensional coordinate system. While these approximations respect the symplectic nature of Hamiltonian systems, linear basis approximations can suffer from slowly decaying Kolmogorov $N$-width, especially in wave-type problems, which then requires a large basis size. We propose two different model reduction methods based on recently developed quadratic manifolds, each presenting its own advantages and limitations. The addition of quadratic terms to the state approximation, which sits at the heart of the proposed methodologies, enables us to better represent intrinsic low-dimensionality in the problem at hand. Both approaches are effective for issuing predictions in settings well outside the range of their training data while providing more accurate solutions than the linear symplectic reduced-order models.

math.NA↗

arXiv2022

Bayesian Identification of Nonseparable Hamiltonian Systems Using Stochastic Dynamic Models

This paper proposes a probabilistic Bayesian formulation for system identification (ID) and estimation of nonseparable Hamiltonian systems using stochastic dynamic models. Nonseparable Hamiltonian systems arise in models from diverse science and engineering applications such as astrophysics, robotics, vortex dynamics, charged particle dynamics, and quantum mechanics. The numerical experiments demonstrate that the proposed method recovers dynamical systems with higher accuracy and reduced predictive uncertainty compared to state-of-the-art approaches. The results further show that accurate predictions far outside the training time interval in the presence of sparse and noisy measurements are possible, which lends robustness and generalizability to the proposed approach. A quantitative benefit is prediction accuracy with less than 10% relative error for more than 12 times longer than a comparable least-squares-based method on a benchmark problem.

math.DS↗

arXiv2022

Combating high variance in Data-Scarce Implicit Hate Speech Classification

Hate speech classification has been a long-standing problem in natural language processing. However, even though there are numerous hate speech detection methods, they usually overlook a lot of hateful statements due to them being implicit in nature. Developing datasets to aid in the task of implicit hate speech classification comes with its own challenges; difficulties are nuances in language, varying definitions of what constitutes hate speech, and the labor-intensive process of annotating such data. This had led to a scarcity of data available to train and test such systems, which gives rise to high variance problems when parameter-heavy transformer-based models are used to address the problem. In this paper, we explore various optimization and regularization techniques and develop a novel RoBERTa-based model that achieves state-of-the-art performance.

cs.CL↗

arXiv2022

Hermite-based, One-step, Variational and Galerkin Time Integrators for Mechanical Systems

In this paper, we present two Hermite polynomial based approaches to derive one-step numerical integrators for mechanical systems. These methods are based on discretizing the configuration using Hermite polynomials which leads to numerical trajectories continuous in both configuration and velocity. First, we incorporate Hermite polynomials for time-discretization and derive one-step variational methods by discretizing the Lagrange-d'Alembert principle over a single time step. Second, we present the Galerkin approach to derive one-step numerical integrators by setting the weighted average of the residual of the equations of motion over a time step to zero. We consider three numerical examples to understand the numerical performance of the one-step variational and Galerkin methods. We first study a particle in a double-well potential and compare the variational approach results with the corresponding results for the Galerkin approach. We then study the Duffing oscillator to understand the numerical behavior in presence of dissipative forces. Finally, we apply the proposed methods to a nonlinear aeroelastic system with two degrees of freedom. Both variational and Galerkin one-step methods capture conservative and nonconservative dynamics accurately with excellent energy behavior. The one-step Galerkin methods exhibit better trajectory and energy performance than the one-step variational methods and the variational integrators.

math.NA↗

arXiv2022

Performance Assessment of Energy-preserving, Adaptive Time-step Variational Integrators

A fixed time-step variational integrator cannot preserve momentum, energy, and symplectic form simultaneously for nonintegrable systems. This barrier can be overcome by treating time as a discrete dynamic variable and deriving adaptive time-step variational integrators that conserve the energy in addition to being symplectic and momentum-preserving. Their utility, however, is still an open question due to the numerical difficulties associated with solving the discrete governing equations. In this work, we investigate the numerical performance of energy-preserving, adaptive time-step variational integrators. First, we compare the time adaptation and energy performance of the energy-preserving adaptive algorithm with the adaptive variational integrator for Kepler's two-body problem. Second, we apply tools from Lagrangian backward error analysis to investigate numerical stability of the energy-preserving adaptive algorithm. Finally, we consider a simple mechanical system example to illustrate the backward stability of this energy-preserving, adaptive time-step variational integrator.

math.NA↗