arXiv subjects

Harald Minde Hansen

Publications and source records attributed to Harald Minde Hansen.

4 recordsLinked to original sources

arXiv2026

Curvature by Design: A Support Structure for Continuum Robots

Constant- and piecewise-constant-curvature models are widely used to simplify the kinematics of continuum robots, although the assumed curvature profiles are not necessarily inherent mechanical properties of the robot and may therefore be violated during operation. Rather than assuming a prescribed curvature profile in the kinematic model and estimating deviations from it, this paper presents a multi-segment scissor-based support structure that mechanically constrains a continuum robot to exhibit prescribed constant or spatially varying curvature profiles. The design uses Taylor approximations to enable an overconstrained multi-joint linkage to predictably distribute global bending among the small-angle movements of multiple flexures. The geometric coupling is realized using compliant flexure joints, enabling the support structure to be manufactured as a single piece. The structure is integrated with a tendon-actuated continuum robot with a flexible backbone. Experiments show that the structure makes the robot resistant to deformations other than the prescribed curvature, significantly enhancing shape precision compared to classical flexible-backbone designs. This constrains the robot from making S-shapes when external loads are applied in the opposite direction of the bending. By mechanically constraining the admissible deformation, the proposed structure reduces the number of independent shape variables that must be estimated.

cs.RO↗

arXiv2026

Tendon-Actuated Robots with a Tapered, Flexible Polymer Backbone: Design, Fabrication, and Modeling

This paper presents the design, modeling, and fabrication of 3D-printed, tendon-actuated continuum robots featuring a flexible, tapered backbone constructed from thermoplastic polyurethane (TPU). Our scalable design incorporates an integrated electronics base housing that enables direct tendon tension control and sensing via actuators and compression load cells. Unlike many continuum robots that are single-purpose and costly, the proposed design prioritizes customizability, rapid assembly, and low cost while enabling high curvature and enhanced distal compliance through geometric tapering, thereby supporting a broad range of compliant robotic inspection and manipulation tasks. We develop a generalized forward kinetostatic model of the tapered backbone based on Cosserat rod theory using a Newtonian approach, extending existing tendon-actuated Cosserat rod formulations to explicitly account for spatially varying backbone cross-sectional geometry. The model captures the graded stiffness profile induced by the tapering and enables systematic exploration of the configuration space as a function of the geometric design parameters. Specifically, we analyze how the backbone taper angle influences the robot's configuration space and manipulability. The model is validated against motion capture data, achieving centimeter-level shape prediction accuracy after calibrating Young's modulus via a line search that minimizes modeling error. We further demonstrate teleoperated grasping using an endoscopic gripper routed along the continuum robot, mounted on a 6-DoF robotic arm. Parameterized iLogic/CAD scripts are provided for rapid geometry generation and scaling. The presented framework establishes a simple, rapid, and reproducible pathway from parametric design to controlled tendon actuation for tapered, tendon-driven continuum robots manufactured using fused deposition modeling 3D printers.

cs.RO↗

arXiv2026

The Quadruped Soft Tail: Compliant Grasping and Swabbing for Contamination Surveys in Harsh Environments

Beryllium contamination surveys in radioactive areas are challenging for robots in environments cluttered with cables and electronics. To address this problem, we have developed a novel quadruped system augmentation: A lightweight, soft, and compliant tendon-actuated robotic tail mounted on a quadruped robot. The tail features a hollow, flexible backbone and a tendon-actuated soft gripper that enables the robot to pick up sampling tissues, swab contaminated surfaces, and release the tissues at designated collection locations for subsequent beryllium analysis. To enable intuitive teleoperation, a closed-form kinematic model and a singularity-robust task-space controller are developed. Experimental results demonstrate that gripper actuation has a negligible effect on robot shape, while common-mode tendon actuation provides an effective mechanism for stiffness modulation and preload control. Furthermore, experimental validation indicates that the proposed kinematic model provides a suitable basis for real-time task-space control. The proposed system combines the agility of legged locomotion with the compliance of soft robotic manipulation, enabling the complete contamination-survey procedure to be performed without human exposure. While motivated by beryllium contamination surveys at CERN, the proposed quadruped soft-tail concept is broadly applicable to legged robots operating in cluttered, confined, or hazardous environments where conventional rigid-link manipulators are undesirable.

cs.RO↗

arXiv2026

Data-Driven Dynamic Modeling of a Tendon-Actuated Continuum Robot

Developing dynamic models for tendon-driven continuum robots is challenging due to their nonlinear, high-dimensional, and friction-dominated dynamics. This paper presents a comparative study of data-driven system identification methods, including N4SID, ARX, and SINDYc, for modeling a tendon-actuated continuum robot with rolling joints developed at CERN. Despite the high number of joints of the robot, experimental analysis reveals that a two-degree-of-freedom dynamic model can accurately capture the system dynamics, owing to strong kinematic dependencies between the joints. The models are validated against experimental data, and used in the design of a model predictive controller, demonstrating their feasibility for real-time control.

cs.RO↗