arXiv Science⌕ Search

arXiv subjects

Harald Haas

Publications and source records attributed to Harald Haas.

At least 19 recordsLinked to original sources
arXiv2026

Analytical Channel Modeling and Stability Aware Optimization of Optical Inter Satellite Links

Optical inter-satellite links (OISLs) are key enablers for high-capacity space networks and next-generation satellite constellations. However, their extreme directionality makes link reliability highly sensitive to platform-induced pointing jitter, which causes random misalignment between the transmitter and receiver beams. In this paper, we develop a tractable closed-form statistical channel model for point-to-point OISLs subject to independent pointing errors at both terminals. Accurate Gaussian main-lobe approximations are applied to the transmitter far-field pattern and receiver coupling efficiency. This transforms the diffraction-based channel response into closed-form expressions for the channel-gain distribution, outage probability, and ergodic capacity. The analytical results are validated through Monte Carlo simulations and used to study the impact of terminal stability, beam divergence, and link margin on OISL performance. The results show that outage probability is governed by the weaker terminal in terms of pointing stability, while improving only the stronger terminal provides minimal additional benefit. In contrast, the ergodic-capacity penalty depends on the combined stability of both terminals, revealing a fundamental distinction between reliability and throughput metrics. The proposed framework provides practical design guidelines for selecting beam parameters and specifying pointing and tracking requirements under varying levels of platform instability.

cs.IT↗
arXiv2026

Hybrid Time-Frequency Domain Frequency Offset Compensation Under GHz Doppler Shift for LEO Satellite-to-Ground Coherent Free-Space Optical Communication

Coherent free-space optical (FSO) communication is a promising solution for low Earth orbit (LEO) satellite downlink transmission. However, high orbital velocity introduces multi-GHz Doppler shifts that appear as a rapidly time-varying carrier frequency offset (CFO), which is a major challenge for conventional coherent optical receivers. Narrow-range digital loops cannot acquire the initial offset, while wide-range feedforward or optical domain solutions either leave large residual errors or impose substantial implementation cost. In this paper, a Doppler-aware hybrid time-frequency frequency offset compensation (HTF-FOC) receiver architecture is proposed for coherent LEO satellite-to-ground FSO links using a cumulative time-varying random process model for the dynamic Doppler-induced phase shift. The proposed receiver implements a hybrid acquisition and tracking procedure to acquire and compensate for multi-GHz Doppler variations, including 4th-power FFT-based coarse CFO acquisition, residual CFO handover verification, and low-complexity decision-directed (DD) frequency-locked loop (FLL) tracking. The phase-averaged pairwise error probability (PEP) and union-bound symbol error rate (SER) expressions are derived and verified using Monte Carlo simulations. The results demonstrate that the proposed HTF-FOC method tracks Doppler shifts beyond $\pm5$ GHz while keeping the residual CFO below $80$ MHz with a success rate of $100\%$ for typical LEO altitudes of $400{\!-\!}800$ km and orbital speeds of $7.3{\!-\!}7.9$ km/s.

eess.SP↗
arXiv2026

VCSEL-Enhanced Holographic Communication for Next-Generation LiFi: State-of-the-Art, Applications, and Future Directions

Light Fidelity (LiFi) has emerged as a promising wireless technology that exploits the vast unlicensed optical spectrum to complement radio frequency networks. Recent advances in laser-based transmitters, particularly vertical-cavity surface-emitting laser (VCSEL) arrays, enable LiFi systems with multi-gigabit data rates, fine-grained spatial multiplexing, and high energy efficiency. However, the highly directional nature of laser beams introduces new challenges related to user mobility, alignment, and dynamic environments. This article introduces VCSEL-enabled holographic communication as a system-level paradigm that addresses these challenges by tightly integrating communication, sensing, and positioning within a single LiFi architecture. The proposed approach leverages individually addressable VCSEL arrays to form a dense grid of controllable beams, while a real-time digital twin of the environment enables adaptive beam management, environmental mapping through sensing, and user localization through positioning, including non-line-of-sight operation. By tightly integrating high-speed data transmission with environmental perception and user tracking, the LiFi access point evolves from a static transmitter into an intelligent environmental hub. The article also provides a tutorial overview of the underlying hardware, system architecture, and operational principles of holographic LiFi, and discusses key applications, open challenges, and future research directions toward next-generation intelligent optical wireless networks.

physics.optics↗
arXiv2026

Picosecond Wireless Synchronization with Entangled Photons via Grid-Based Quantum Coverage in Indoor Optical Systems

In this paper, we present a robust entanglement-assisted synchronization framework for indoor optical wireless systems that explicitly captures the coupling between spatial beam geometry and temporal synchronization accuracy. Unlike conventional approaches that treat beam steering and timing estimation independently, a unified spatio temporal model is developed that links user position uncertainty to the Cramer Rao lower bound of the synchronization error. The framework incorporates key physical impairments, including multipath dispersion, non Gaussian detector jitter, and spatially correlated localization errors. Through analytical modeling and extensive simulations, we show that the proposed system exhibits graceful performance degradation under heavy tailed positioning uncertainty and remains stable in the presence of multipath induced bias. Using realistic single photon detector parameters, the results indicate that synchronization accuracy below $10$ picoseconds can be maintained across a wide range of operating conditions. This level of precision provides a scalable foundation for quantum enabled indoor wireless networks.

quant-ph↗
arXiv2026

Q-Learning for 3D Coverage in VCSEL-based Optical Wireless Systems

Beam divergence control is a key factor in maintaining reliable coverage in indoor optical wireless communication (OWC) systems as receiver height varies.Conventional systems employ fixed divergence angles, which result in significant coverage degradation due to the non-convex tradeoff between optical power concentration and spatial spread. In this paper, we introduce a reinforcement learning (RL)-based framework for dynamic divergence adaptation in vertical-cavity surface-emitting laser (VCSEL)-based OWC networks. By continuously interacting with the environment, the RL agent autonomously learns a near-optimal mapping between receiver height and beam divergence, thereby eliminating the need for analytical modeling or computationally intensive exhaustive search. Simulation results demonstrate that the proposed approach achieves up to 92% coverage at low receiver heights and maintains robust performance under challenging conditions, enabling scalable, real-time, and energy-efficient beam control for dense VCSEL array deployments in next-generation OWC systems.

math.OC↗
arXiv2026

Performance Scaling Laws for PD Array-based Receivers in IM/DD Optical Wireless Communication Systems

We study the performance scaling laws for electrical-domain combining in photodetector (PD) array-based receivers employing intensity modulation and direct detection, taking into account the inherent square-law relationship between the optical and electrical received powers. The performance of PD array-based systems is compared, in terms of signal-to-noise ratio (SNR) and achievable rate, to that of a reference receiver employing a single PD. Analytical and numerical results show that PD arrays provide performance gains for sufficiently narrow beams and above an SNR threshold. Furthermore, increasing the number of PDs alone does not enhance performance, and joint optimization of beam pattern, transverse electromagnetic mode, received power, and PD positions is necessary. Our model and derived insights provide practical guidelines and highlight the trade-offs for the design of next-generation high-bandwidth PD array receivers.

eess.SP↗
arXiv2026

Modulating Retroreflectors for CubeSat Optical Inter Satellite Links: Modeling, Optimization, and Benchmarking

Modulating retroreflectors (MRRs) offer a promising pathway to low-complexity and energy efficient asymmetric optical inter-satellite link (OISL) for small spacecrafts, such as CubeSats. In this paper, we develop a unified statistical channel model for an on off keying modulated, retroreflector-enabled OISL. The model captures both stochastic and deterministic pointing losses, as well as signal-dependent noise. Stochastic channel distributions are approximated via Monte Carlo simulation, and system optimization is carried out under CubeSat constraints using the achievable information rate as the primary metric. In addition, we derive bit-error ratio and outage probability to evaluate communication reliability. The proposed architecture is benchmarked against three state-of-the-art CubeSat laser terminals, i.e., NASA's Optical Communications and Sensors Demonstration (OCSD), DLR's OSIRIS4CubeSat, and NASA's CLICK BC. Results indicate that an optimized MRR-based transmitter can outperform OCSD and achieve performance comparable to OSIRIS4CubeSat at ranges below 500 km, while consuming only 2.5 W of power during transmission, significantly less than conventional CubeSat optical terminals.

physics.optics↗
arXiv2025

MRR-Based Line-Laser Scanning for Reliable Vehicular Positioning and Optical Communication

High-speed vehicular environments require optical systems capable of joint sensing, positioning, and communication (JSPC) without mechanical tracking. Existing optical and integrated sensing-communication approaches often rely on point-source emitters or camera-based receivers, limiting spatial coverage and update rate under highway dynamics. This work introduces a new class of tracking-free optical JSPC systems that combine structured line-laser illumination with modulating retroreflector (MRR) arrays on vehicles. Two orthogonal line lasers perform synchronized longitudinal and transverse scanning to provide continuous, wide-area coverage across the roadway. A coverage-driven analytical framework models the coupling between beam divergence, scan geometry, and dwell-time allocation, enabling joint evaluation of sensing reliability and communication quality. An optimization scheme is developed to adapt scanning and divergence parameters for uniform coverage and power efficiency. Simulation results demonstrate significant improvements in spatial coverage uniformity, link stability, and reliability within a fixed scan period. These results establish a practical pathway toward scalable, turbulence-resilient optical architectures for next-generation vehicular JSPC networks.

eess.SP↗
arXiv2025

Retroreflective Optical ISAC for 6G: Technologies, Applications and Future Directions

Integrated sensing and communication (ISAC) has emerged as a key technological paradigm for sixth generation (6G) mobile networks, aiming to unify sensing and communication in a spectrally efficient and hardware lightweight manner. Radio frequency ISAC (RF-ISAC) is constrained by spectrum crowding, limited sensing resolution, and susceptibility to electromagnetic interference. In contrast, optical ISAC (O-ISAC) leverages the large bandwidth and short wavelength of optical carriers and is regarded as an important complement to RF-ISAC. However, conventional O-ISAC relies on natural optical reflections from target surfaces, which generate weak echoes that are highly dependent on surface materials, thereby limiting the achievable sensing range and sensing accuracy. This article introduces retroreflective optical ISAC (RO-ISAC), which alleviates these limitations by equipping targets with compact retroreflective modules. These modules return incident light approximately back to the source over a useful range of incidence angles, forming a well controlled double pass optical path with strong and stable echoes, and thereby further unlocking the application potential of O-ISAC. The conceptual architecture of RO-ISAC is presented together with the underlying retroreflection mechanism. Key enabling technologies for RO-ISAC systems are discussed, including channel modeling, waveform design, bidirectional transmission, and multi-target sensing and communication, with representative details and experimental validation. The suitability of RO-ISAC is analyzed in indoor, aerial, underwater, and satellite scenarios, and challenges and research directions related to mobility, cooperative networking, intelligent operation, and sustainable deployment are outlined, pointing toward robust and scalable RO-ISAC deployment in future 6G networks.

eess.SP↗
arXiv2025

Dynamic Power Allocation For NOMA-Based Transmission in 6G Optical Wireless Networks

OWC has been considered as a key enabling technology to unlock unprecedented speeds of communication, supporting high demands of data traffic. In this paper, infrared lasers are used as optical transmitters operating in an indoor environment under eye safety regulations due to their high modulation speed. To provide efficient multiple access service, NOMA-based transmission is implemented to multiplex messages intended to multiple users in the power domain and maximize the spectral efficiency of our laser-based OWC network. In particular, a BIA outer precoder is designed to coordinate the transmission among multiple APs and determine the precoding matrices for groups of users potential formed according to NOMA principles. For effective use of NOMA, an optimization problem is formulated to maximize the sum rate of the network through forming optimum groups under certain joint conditions, efficient power allocation, high quality of service for each weak and strong users, and high overall system performance. Such optimization problems are defined as max-min fractional programs difficult to solve in practice. Therefore, a dynamic application for NOMA is introduced using two algorithms. First, a RF-aided dynamic algorithm is designed to form multiple groups, where users exchange binary variables among them through an RF system to establish distance-based weight edges, which are used as a metric for the grouping process. Second, a dynamic power allocation is proposed to determine the optimum power allocated to each group, while the users belonging to a certain group receive their traffic demands regardless of their classification as weak or strong. The results show the convergence of the proposed dynamic application to the optimum solution, and its high performance in terms of sum rate, fairness, and energy efficiency compared to counterpart schemes.

eess.SY↗
arXiv2025

Multi-Segment Photonic Power Converters for Energy Harvesting and High-Speed Optical Wireless Communication

The demand for energy-efficient high-speed wireless communication, coupled with the rapid rise of IoT devices, requires systems that integrate power harvesting with optical data reception to eliminate the need for charging or battery replacements. Recent advances have explored the use of solar cells as optical receivers for high-speed data detection alongside power harvesting. \acs{GaAs}-based \acp{PPC} provide six times greater electron mobility than silicon- or cadmium telluride-based cells, enabling faster data detection and improved power efficiency. However, their bandwidth is constrained by junction capacitance, which increases with active area, creating a trade-off between power output and data rate. To address this, we propose and test multi-segment \acs{GaAs}-based \Acp{PPC} that serve as both energy harvesters and data detectors. By segmenting the active area into 2, 4, or 6 subcells, forming circular areas with diameters of 1, 1.5, or 2.08~mm, we reduce capacitance and boost bandwidth while preserving light collection. Fabricated on a semi-insulating \ac{GaAs} substrate with etched trenches for electrical isolation, the series-connected subcells optimize absorption and minimize parasitic effects. The \Acp{PPC} were used for an eye-safe 1.5~m optical wireless link, employing \ac{OFDM} with adaptive bit and power loading. The system achieved a world record data rate of 3.8~Gbps, which is four times higher than prior works. The system converts 39.7\% of optical power from a beam of 2.3~mW, although the segmentation increases the sensitivity of the alignment. These findings provide new solutions for off-grid backhaul for future communication networks, such as 6th generation (6G) cellular.

eess.SY↗
arXiv2025

Achieving 70 Gb/s Over A VCSEL-Based Optical Wireless Link Using A Multi-Mode Fiber-Coupled Receiver

In this paper, we demonstrate a laser-based optical wireless communication (OWC) system employing a 940 nm single-mode (SM) vertical cavity surface emitting laser (VCSEL) and a multi-mode (MM) fiber-coupled receiver, achieving a record data rate beyond 70 Gb/s, while the optical transmit power is below 5 mW. The use of a high speed fiber-optic photoreceiver avoids limiting the communication bandwidth by the receiver, enabling ultra-high capacity and energy-efficient light fidelity (LiFi) links to unlock new applications. This work experimentally validates the feasibility of ultra-high speed indoor OWC systems using a single low-power and low-cost VCSEL for next-generation LiFi connectivity.

eess.SP↗
arXiv2025

Energy-Efficient Precoding for Dense VCSEL-Based OWC Systems Under a Cooperative Broadcast Model

As 6G and beyond aim for sustainable, high-capacity wireless connectivity, optical wireless communication (OWC) has emerged as a compelling solution.Recent advances in vertical-cavity surface-emitting laser (VCSEL) arrays have significantly enhanced OWC performance, enabling high-speed, low-power data transmission. However, dense VCSEL deployments introduce challenges related to interference and energy efficiency (EE). This paper proposes a scalable precoding framework for EE maximization in fully cooperative VCSEL-based OWC broadcast systems. We formulate a non-convex optimization problem to design the precoding matrix under practical optical constraints while guaranteeing minimum user rates. To solve this, we apply Dinkelbach's method to handle the fractional objective and the inner approximation technique to iteratively convexify and solve the problem. Simulation results show that our approach consistently outperforms regularized zero-forcing in terms of EE, particularly in large-scale deployments, demonstrating its potential for next-generation sustainable dense OWC networks.

physics.optics↗
arXiv2025

Real-Time Transmission of Uncompressed High-Definition Video Via A VCSEL-Based Optical Wireless Link With Ultra-Low Latency

Real-time transmission of high-resolution video signals in an uncompressed and unencrypted format requires an ultra-reliable and low-latency communications (URLLC) medium with high bandwidth to maintain the quality of experience (QoE) for users. We put forward the design and experimental demonstration of a high-performance laser-based optical wireless communication (OWC) system that enables high-definition (HD) video transmission with submillisecond latencies. The serial digital interface (SDI) output of a camera is used to transmit the live video stream over an optical wireless link by directly modulating the SDI signal on the intensity of a 940 nm vertical cavity surface emitting laser (VCSEL). The proposed SDI over light fidelity (LiFi) system corroborates error-free transmission of full HD (FHD) and 4K ultra-high-definition (UHD) resolutions at data rates of 2.97 Gb/s and 5.94 Gb/s, respectively, with a measured end-to-end latency of under 35 ns. Since SDI standards support various video formats and VCSELs are high-bandwidth and low-power devices, this presents a scalable and inexpensive solution for wireless connectivity between professional broadcast equipment using off-the-shelf SDI components.

eess.SP↗
arXiv2025

Safety Analysis for Distributed Coupled-Cavity Laser based Wireless Power Transfer

Intracavity laser-based systems are emerging as key enablers for next-generation wireless communications, positioning, and wireless power transfer (WPT). Distributed coupled-cavity laser (DCCL) systems, as a representative configuration, have been proposed to expand the field of view (FoV) and enhance safety. This paper investigates the safety assessment of DCCL-WPT systems through three case studies: skin safety, eye safety, and small-object intrusion sensitivity. First, we establish a safety analysis model to quantify irradiation levels on intruding objects in the beam path, which simulates intracavity beam propagation using diffraction modeling and gain-loss dynamics under case-specific boundary conditions. Next, we formulate an eye safety evaluation tailored for DCCL-WPT systems using a human head model to identify potential exposure angles and distances. Ray tracing confirms that intracavity beams are not focused onto the retina, making cornea exposure the primary consideration (irradiance is below 0.1 W/cm2). Numerical results demonstrate that DCCL-WPT achieves: i) over 600 mW charging power under skin-safe conditions at 5 m distance (100 mW over 16° FoV), and nearly 50% lower irradiance on intruding objects compared to single-cavity systems; ii) 150 mW charging power under eye-safe conditions with 650 mW 1064 nm output beam power, far beyond the typical ~10 mW eye-safe threshold; iii) high sensitivity to small-object intrusion, enabling hazard mitigation. These findings underscore the practicality of DCCL-WPT systems for mobile, long-distance, and safe energy transfer, and lay the groundwork for future safety-aware optimizations in real-world deployments.

physics.optics↗
arXiv2025

Underwater Multi-Wavelength Optical Links With Blue Targets and Constraints: Opportunities and Challenges

Underwater optical wireless technologies offer multiple advantages over the acoustic technology. Acoustic signals, for instance, are susceptible to noise from marine sources due to marine life and human activities. This is not the case with optical signals. However, absorption and scattering significantly attenuate optical signals. This limits the communication range and requires higher transmission power or more sensitive receivers to detect transmitted light. Therefore, it is necessary to design underwater optical systems with a higher transmission rate and reduced attenuation. To this end, we introduce a framework for designing optical signaling constellations employing multi-wavelength light sources to account for the transmission distance and achievable rate. In particular, we redefine the color-shift keying (CSK) constraint region to target blue light and adapt to marine environments. We discuss an example of 4-point underwater CSK. The corresponding analytical results demonstrate the trade-offs between the symbol error probability, achievable rate, and transmission range of the proposed scheme.

eess.SP↗
arXiv2025

Optical Wireless Communications: Enabling the Next Generation Network of Networks

Optical wireless communication (OWC) is a promising technology anticipated to play a key role in the next-generation network of networks, especially as a complementary technology to traditional radio frequency communications, for enhancing networking capabilities beyond conventional terrestrial networks. OWC is already a mature technology with diverse usage scenarios, and can enable integrated applications via wireless access and backhaul networks, dynamic drone and satellite networks, underwater networks, inter- and intra-system interconnecting networks, and vehicular communication networks. Furthermore, novel and emerging technological opportunities such as photovoltaic cells, orbital angular momentum-based modulation, optical reconfigurable intelligent surfaces, organic light-emitting and photo diodes, and recent advances in ultraviolet communications can help enhance future OWC capabilities even further. Moreover, OWC networks can also support value-added services such as enhanced positioning and gesture recognition. Hence, OWC provides unique functionalities that can play a crucial role in building convergent and resilient future network of networks alongside radio frequency and optical fiber technologies.

eess.SP↗