arXiv subjects

Haoran Yang

Publications and source records attributed to Haoran Yang.

At least 19 recordsLinked to original sources

arXiv2026

Six-Degree-of-Freedom Rotor-Load Cross-Spectral Density from Rotor-Plane Turbulence Cross-Spectra

A frequency-domain response analysis of a wind turbine rotor requires the complete hub-load spectrum, but the customary scalar thrust and torque spectra retain neither the four in-plane components nor the coupling between them. This paper derives the full six-degree-of-freedom (6-DOF) rotor-load cross-spectral-density (CSD) matrix from the IEC Kaimal turbulence model. By decoupling the spatial order of inflow coherence from the temporal Doppler shift, the formulation introduces a two-index rotational-sampling kernel. Rotor symmetry and azimuthal averaging constrain the observed Doppler carrier strictly to blade-passing harmonics $pBf_{\mathrm{rot}}$, while the azimuthal aerodynamic transfer shifts the spatial coherence order to $pB+s$. A convergence study of the retained azimuthal order $s$ shows that $\lvert s\rvert\le4$ suffices, the assembled CSD then deviating from the full-band result by less than $10^{-5}$ in relative norm. The formulation is compared with OpenFAST simulations of a rigid floating wind turbine over nine wind speeds: the six auto-spectral densities agree closely below 1~Hz, and the present theory over-predicts the spectra near the 6P and 9P rotational harmonics.

physics.flu-dyn↗

arXiv2026

MDMR-Bench: A Multi-Dimensional Benchmark for Multi-Reference Image Generation

Image generation models have rapidly advanced, with many models now supporting generation conditioned on multiple reference images and textual instructions. Such models enable a wide range of applications, including entity fusion and attribute transfer across images. However, existing benchmarks for multi-reference image generation rely on limited evaluation dimensions and fail to capture the diverse challenges of the task. To address this limitation, we propose MDMR-Bench, a Multi-Dimensional benchmark for Multi-Reference image generation. MDMR-Bench is organized around representative capability settings and consists of multiple evaluation subsets spanning diverse dimensions of multi-reference image generation, including (1) common entity fusion and attribute transfer, (2) multi-element extraction from a single image, (3) infographic manipulation, and (4) visual reasoning-intensive generation. This design enables systematic analysis of model capabilities and failure modes across different challenge dimensions. Furthermore, to achieve more reliable and interpretable evaluation, we introduce a checklist-based evaluation protocol that decomposes generation quality into fine-grained evaluation aspects. Instead of relying solely on holistic scoring, our framework uses structured checklists composed of both global-level and atomic-level queries, enabling more diagnostic assessment of model performance. By benchmarking both open-source and proprietary models, we demonstrate that MDMR-Bench provides fine-grained insights into model performance across different dimensions. The dataset and code are publicly available.

cs.CV↗

arXiv2026

Physical AI: Concepts, Techniques, and Challenges

In recent years, physical artificial intelligence (physical AI) has experienced rapid development, capturing significant attention in academia and industry. However, the field has yet to reach consensus on its definition, technical landscape, and core challenges. To address this gap, this monograph seeks to define physical AI, present its technical landscape, and examine each key technical subfield in depth. In doing so, it establishes a unified framework for Physical AI: artificial systems that perceive, model, and act upon the physical world through continuous feedback under real-world constraints. Further, this monograph distinguishes physical AI from conventional digital AI, embodied AI, cyber-physical systems, and digital twins. It develops the foundations of physical AI across physics, control, cognition, learning, and reasoning. It reviews key methodologies, including multimodal perception, physical data and simulation, world models, embodied foundation models, motor-control systems, multi-agent coordination, and hardware-software co-design. Furthermore, it examines applications spanning robotics, manufacturing, infrastructure, scientific experimentation, and autonomous services. Particular attention is given to sim-to-real transfer, reliability, real-time execution, evaluation, safety, governance, and long-term deployment. By connecting perception, prediction, decision-making, action, and adaptation in a closed loop, this monograph identifies the technical challenges and research directions required to advance from narrow automation toward more generalizable physical AI and, ultimately, physical artificial general intelligence (Physical AGI).

cs.AI↗

arXiv2026

EgoExplorer: A Vision-Motion-Touch Observatory for Human Loco-Manipulation In Situ

Learning humanoid loco-manipulation from human demonstrations rests on observing how locomotion, posture, and object interaction evolve together as tasks unfold. Scaling collection across diverse environments, in turn, favors lightweight, portable capture systems. Yet, existing datasets provide only partial views of this coordination. Thus, we introduce EgoExplorer, a 100-hour vision-motion-touch observatory of human loco-manipulation built with a wearable system. With an emphasis on professional activities, its continuous recordings align egocentric video with reconstructed whole-body motion, fine-grained finger articulation, and tactile observations, accompanied by step-level descriptions. To achieve this coverage with sparse body sensing, we develop the Calibrate-Complete-Constrain pipeline. Concretely, reusable calibration fixes participant geometry and sensor attachments before motion inference to disentangle mounting offsets from articulation. A temporal prior then completes unobserved joint motion, while layered constraints promote measurement agreement, temporal continuity, and geometric consistency, properties that motion plausibility alone does not guarantee. Against tracker-fitted references, the method reduces body-point error by 71.9% relative to the strongest baseline; matched evaluations also show gains in hand stability and contact estimation. Preliminary studies explore multimodal generation and conditioning alongside humanoid retargeting with whole-body control in simulation.

cs.RO↗

arXiv2026

IronLLM: Forging Compact Edge-Native Language Models for Real-Time Embodied Intelligence

We present IronLLM-0.6B, a 654M-parameter language model designed for efficient on-device inference. IronLLM-0.6B combines a hybrid attention architecture with X-MTP, a lightweight shared-KV multi-token prediction design that eliminates per-depth KV-cache replay and employs a lightweight verification head for rollback-free drafting, achieving a 1.48x decoding speedup. The model is pretrained on approximately 6.2 trillion tokens using a quality-oriented data pipeline and is further post-trained with Multi-Domain On-Policy Distillation to integrate capabilities from domain-specialized teachers. To better meet the low-latency requirements of on-device scenarios, IronLLM-0.6B adopts an Instruct-Only design. Evaluations show that IronLLM-0.6B achieves competitive performance relative to larger models such as Qwen3.5-0.8B and MiniCPM5-1B, while producing more concise responses on many tasks. We further present IronLLM-0.6B-Light, which replaces RMSNorm with Dynamic Tanh and simplifies several computationally expensive components to improve inference and quantization efficiency. Together, the IronLLM models provide an effective performance-efficiency trade-off for resource-constrained deployment.

cs.AI↗

arXiv2026

WOLF: World Model Guided LiDAR Exploration with Predictive Frontiers

LiDAR-based unmanned aerial vehicle (UAV) exploration builds maps by continually selecting where to observe next. However, decisions based on the measured map provide limited foresight into spatial continuations behind occlusions, leaving potentially informative directions unrecognized. We present WOLF, a world-model-guided framework that predicts future observations to enhance autonomous exploration. In the training stage, a recurrent world model learns observation dynamics from exploration trajectories, with recurrent memory retaining the spatial context needed to interpret partial observations across successive views. Building on this context, the model combines observation history with candidate motions during exploration to predict local occupancy and visibility. To guide further sensing, a predictive frontier generation mechanism then aligns and fuses these predictions using confidence, branch agreement, and observation quality to identify promising regions. The resulting predictive frontiers join measured ones to guide geometric viewpoint selection and trajectory generation, while new scans update subsequent predictions. In simulations, our method reduces mean terminal time by 10.9% relative to EPIC in Garage at comparable coverage and increases mean coverage from 42.12% to 98.35% in Tunnel. Real-world experiments further demonstrate onboard deployment of the learned model for online inference during physical flight.

cs.RO↗

arXiv2026

DeepSeek-V4.1-Flash: Pushing the Limits of KV Cache Compression

The widespread adoption of long-horizon agents has made model workloads increasingly input-heavy. Although prior work has substantially reduced the cost of long-context computation, prefill remains computationally expensive, and large KV caches continue to strain HBM and SSD capacity and data-transfer bandwidth. Together, these compute, storage, and bandwidth demands constitute the primary bottleneck to further lowering deployment costs. To address this challenge, we introduce DeepSeek-V4.1-Flash, a multimodal Mixture-of-Experts (MoE) model with 552B backbone parameters and support for contexts of up to one million tokens. With its Causal Encoder-Decoder (CED) architecture, the model activates 16B parameters per token during decode but only 8B parameters during prefill, substantially improving cost efficiency for agentic workloads. To push the limits of KV cache compression, DeepSeek-V4.1-Flash combines cross-layer KV cache reuse in Compressed Sparse Attention 2 (CSA2) with FP4 KV caching. These designs reduce its global KV cache footprint (always in HBM) to 890 bytes per token, roughly 1/4 of the corresponding footprint of DeepSeek-V4-Flash. Further, through a dedicated deployment optimization known as SWA Bounded Replay, DeepSeek-V4.1-Flash reduces its persistent KV cache footprint (always on SSD or in host memory) to roughly 1/8 of that of DeepSeek-V4-Flash. Despite its much smaller KV cache footprint, the model delivers substantially better performance than the baseline. In addition, we streamline the DeepSeek-V4 architecture and introduce several efficient architectural extensions. We pretrain DeepSeek-V4.1-Flash on a multimodal corpus comprising 45T tokens and conduct comprehensive post-training, yielding strong performance across diverse text-based and multimodal agentic scenarios. Model checkpoints are available at https://huggingface.co/deepseek-ai/DeepSeek-V4.1-Flash.

cs.CL↗

arXiv2026

ReliGRec: Reliability-Oriented LLM-Based Generative Recommendation via User-Risk-Aware Prompt Routing

User behavior in real-world recommender systems is heterogeneous. While some users exhibit coherent preferences, others show abrupt interest shifts, bursty interactions, excessive repetition, or inconsistency with collaborative neighborhoods. Such deviations may arise from benign variation or manipulation, including shilling attacks, but do not alone establish malicious intent. Existing robust recommenders exploit user-risk signals through training-time reweighting or graph aggregation, whereas adapting generation to estimated user-level weak risk remains underexplored in LLM-based generative recommendation. We propose ReliGRec (Reliability-oriented Generative Recommendation), a weakly supervised framework whose name denotes its design goal rather than a supervised reliability variable. ReliGRec derives user-level weak-risk proxy labels from review-feedback signals for a subset of users and represents sequential behavior and collaborative context using a Behavior Token and temporal Graph Tokens, respectively. A Dual-View Weak-Risk Estimator fuses the representations to produce a user-level weak-risk score that selects a Simple or Cautious Prompt at inference. The Cautious Prompt is designed to encourage attention to stable, collaboratively supported evidence while reducing overreliance on isolated, short-term, or repeated interactions. The Behavior Token affects generation through weak-risk estimation and routing, whereas the aggregated Graph Token provides collaborative context for next-item Semantic ID generation. ReliGRec thus turns weak-risk estimation from an auxiliary prediction into a generation-time control signal. Experiments report competitive recommendation and weak-risk proxy-label prediction, while routing analyses characterize the recommendation-quality and inference-cost behavior of weak-risk-guided prompting.

cs.IR↗

arXiv2026

QMClaw: A Scalable General-purpose Framework for Quantum Measurement and Control

As quantum computing continues to scale, quantum measurement and control (QMC) are increasingly constrained by calibration workflow complexity and by requirements for low-latency execution, robust exception handling, and traceable workflow governance. Existing frameworks for QMC are specialized and task-specific, while language-model-based agents for QMC suffer from excessive latency and cannot satisfy the strict timing and control-density demands of large-scale quantum systems. Here we propose QMClaw, a general, workflow-oriented framework for QMC built, featuring a local-first, tool-governed, robust architecture. At its core is a RuleEngine-centered control layer that processes structured context, performs rule-based state transitions, and generates execution plans for typical calibration workflows. Language models are used only for natural-language interaction, high-level task understanding, and exception support, keeping the critical fast path efficient. We implement a single qubit tune-up workflow as a demonstration and validation using real quantum device dataset. We also prove that the framework achieves quantitatively acceptable levels in terms of resource cost, LLM calling times and decision latency, enabling its practical deployment in large-scale quantum qubit measurement and control scenarios. This work presents a general workflow-oriented framework for QMC and provides evidence that rule-centered architectures are a promising design choice for scalable quantum-system calibration.

quant-ph↗

arXiv2026

PhyGile: Physics-Prefix Guided Motion Generation for Agile General Humanoid Motion Tracking

Humanoid robots are expected to execute agile and expressive whole-body motions in real-world settings. Existing text-to-motion generation models are predominantly trained on captured human motion datasets, whose priors assume human biomechanics, actuation, mass distribution, and contact strategies. When such motions are directly retargeted to humanoid robots, the resulting trajectories may satisfy geometric constraints (e.g., joint limits and pose continuity) and appear kinematically reasonable. However, they frequently violate the physical feasibility required for real-world execution. To address these issues, we present PhyGile, a unified framework that closes the loop between robot-native motion generation and General Motion Tracking (GMT). PhyGile performs physics-prefix-guided robot-native motion generation at inference time, directly generating robot-native motions in a 262-dimensional skeletal space with physics-guided prefixes, thereby eliminating inference-time retargeting artifacts and reducing generation-execution discrepancies. Before physics-prefix adaptation, we train the GMT controller with a curriculum-based mixture-of-experts scheme, followed by post-training on unlabeled motion data to improve robustness over large-scale robot motions. During physics-prefix adaptation, the GMT controller is further fine-tuned with generated objectives under physics-derived prefixes, enabling agile and stable execution of complex motions on real robots. Extensive offline and real-robot experiments demonstrate that PhyGile expands the frontier of text-driven humanoid control, enabling stable tracking of agile, highly difficult whole-body motions that go well beyond walking and low-dynamic motions typically achieved by prior methods.

cs.RO↗

arXiv2026

POLYFLOW: A Neuro-Symbolic Framework for Static Cross-Language Information Flow Analysis

Modern software systems are commonly constructed in multiple, interacting programming languages. This construction leads to additional, often stealthy vulnerabilities buried in complex information flow due to language interactions. Existing static analyzers are impeded by the heterogeneous semantics of different languages, whereas dynamic approaches suffer from the limited coverage of (available and/or generated) test inputs. In this paper, we develop PolyFlow, a neural-symbolic framework for statically reasoning about information flow across language boundaries, combining large language models (LLMs) and static analysis synergistically. Governed by the control-flow representation of a given multi-language system, PolyFlow leverages LLMs to identify implicit flow facts due to challenging language features, hence augmenting the base representation and then propagating data flow through the system. It tackles inherent barriers (e.g., token limit and hallucination) of LLMs by putting them under careful guidance (e.g., static-analysis-guided scoping, context management, and fact checking), along with a multi-LLM expert panel for negotiated validation. Our experiments on real-world Python-C and Java-C systems show that PolyFlow is cost-effective and superior to various kinds of state-of-the-art baselines, revealing previously unknown cross-language vulnerabilities that are missed by all the baselines.

cs.CR↗

arXiv2026

A Comprehensive Study of Native Code Bugs in Python Applications

The impact of Python applications has been evidenced by their widespread presence in some of the most impactful software domains, such as machine learning frameworks and scientific computing platforms. These applications often integrate native code components written in a lower-level programming language like C. This multilingual construction brings various benefits such as greater performance efficiency and easier interoperability with diverse runtime environments. However, bugs in the native code (i.e., native code bugs), which are usually stealthy, also constitute a major additional challenge to the quality of the Python applications as a whole. Yet despite existing relevant studies, there remains a lack of comprehensive understanding of native code bugs in Python applications. In this paper, we aim to mitigate this knowledge gap through the first in-depth study of such bugs, dissecting their common symptoms, introducing locations, manifestation characteristics, root causes, and fixes. Based on our extensive automated and manual analyses of 216 native code bugs in real-world Python projects on GitHub, we obtained novel findings about and new insights into the occurrence mechanisms and resolution strategies of those bugs.

cs.SE↗

arXiv2026

Development of A Novel Compton Camera for MeV Gamma-Ray Measurement in Space

The astrophysical gamma rays in the MeV energy region have not yet been well-explored due to the limitation of detection technology in the past decades, and the famous gamma-ray "MeV gap" exists. Opening the window of MeV gamma-ray is not only critical for the gamma astronomy but also essential for rich frontier researches in astro-particle physics, such as detecting light dark matter, probing the primordial black hole and better understanding of nucleosynthesis. As a pilot experiment of the project for dark matter detection in space at Shanghai Jiao Tong University, a three-layer Compton camera with the energy resolution better than 4% and position resolution of ~2 mm is developed utilizing the novel scintillators. Here we show the design, detailed calibration and validation results of the novel Compton camera, and demonstrate its good ability of MeV gamma-ray source imaging for the upcoming in-orbit mission.

hep-ex↗

arXiv2026

ServerlessT2I: Efficient Text-to-Image Workflow Serving on a Serverless Platform

Text-to-image (T2I) workflows are increasingly deployed on serverless platforms because users often compose customized workflows and invoke them intermittently. Existing platforms typically deploy each workflow as an opaque GPU function, provisioning, placing, and scaling all constituent models in the workflow together. This monolithic design obscures workflow structure, inflates scaling overhead, forces users to manage low-level GPU coordination, and limits fine-grained fairness in multi-tenant clusters. In this paper, we present ServerlessT2I, a serverless-native system that decomposes a T2I workflow into loosely coupled model functions that can be independently managed and scheduled. By explicitly managing individual model execution, ServerlessT2I enables per-model scaling, declarative workflow composition, transparent GPU-resident communication, and fairness-aware scheduling. To make this decomposition efficient, ServerlessT2I harvests slack GPU memory left idle by compute-bound T2I inference to build a data plane that reduces model loading and data communication overheads. \sys{} further introduces a fair scheduler for multi-tenant serving. Using production traces, ServerlessT2I sustains up to 2$\times$ higher request rates than existing T2I workflow serving systems with the same GPU budget; for a fixed request rate, it saves up to 3$\times$ GPU resources while satisfying service level objectives (SLOs).

cs.DC↗

arXiv2026

Boogu-Image-0.1: Boosting Open Agentic Multimodal Generation via Understanding under a Minimal Budget

We introduce Boogu-Image-0.1, an open-source unified multimodal understanding and generation model family, comprising Base, Turbo, Edit, and Edit-Turbo variants. It delivers competitive performance in high-quality text-to-image generation, fast inference, instruction-based editing, and bilingual (Chinese-English) text rendering. Closed-source multimodal systems like Nano-Banana-Pro and GPT-Image-2 achieve strong performance through system-level integration rather than a single model, yet their internal practices remain largely undisclosed. In this work, we demonstrate that strengthening the understanding capability of the system, through a stronger multimodal encoder, agentic prompt rewriting, and related techniques, together with improvements in data quality, training pipelines, and agentic inference-time scaling, can substantially enhance generation and editing performance even under highly constrained compute budgets. Comprehensive evaluations show that Boogu-Image-0.1 consistently matches or surpasses other open-source models across standard benchmarks, and achieves results approaching leading closed-source systems. Notably, this is accomplished with only 208.62 million unique images. The base model's theoretical training cost is only approximately \$400K. We share practical discussions that we believe are valuable to the broader research community, and release weights, code, and recipes under Apache 2.0 to advance the open ecosystem for unified multimodal understanding and generation. Our code is available here: https://github.com/Boogu-Project/Boogu-Image.

cs.CV↗

arXiv2026

Separate Control of Transient Leakage Exposure and Endpoint Leakage in Fast Transmon Gates

Leakage to noncomputational states limits the speed of single-qubit gates in weakly anharmonic transmons. Conventional pulse-shaping methods, including derivative removal by adiabatic gate (DRAG), primarily suppress the leakage remaining at the end of a gate. Here we demonstrate that endpoint leakage and the transient leakage population that accumulates during the gate represent distinct control objectives. Endpoint leakage is associated with the drive spectrum at the anharmonicity, whereas transient exposure depends on spectral weight over a finite frequency band and governs the additional leakage induced by dephasing. A spectral null at the leakage transition therefore suppresses the endpoint amplitude without necessarily reducing transient exposure. Based on this distinction, we introduce a path--endpoint separation pulse that combines transient-path shaping with a two-tone endpoint correction. For a $10$ ns $R_X(π/2)$ gate with an anharmonicity magnitude of $0.2$ GHz, numerical simulations show a $21\%$ reduction in transient exposure relative to cosine DRAG and a corresponding $20\%$ reduction in dephasing-induced excess leakage. The two correction tones further suppress residual leakage through the $|2\rangle$ and $|3\rangle$ channels, lowering the coherent endpoint leakage from approximately $7\times10^{-7}$ to $3\times10^{-8}$ without increasing transient exposure. These results establish transient exposure and endpoint leakage as complementary targets for the design of fast transmon gates.

quant-ph↗

arXiv2026

TRACE: State-Aware Query Processing over Temporal Evidence Graphs for Conversational Data

Conversational data is increasingly used as a persistent source of user state for long-running assistants and AI agents. However, querying this data remains challenging because conversations naturally evolve: plans are revised, preferences change, and later messages frequently supersede or contradict earlier information. Existing long-memory pipelines largely treat memories as independent text or vector objects. This approach often retrieves semantically similar but stale evidence, offering limited support for state-aware reasoning. To address this problem, we present TRACE, a query processing framework over temporal evidence graphs for evolving conversational data. TRACE models conversations as a hierarchical graph spanning events, sessions, and topics, enriched with typed temporal, causal, update, and contradiction relations. Crucially, the framework maintains validity annotations so obsolete facts remain accessible for historical queries but are discounted for current-state answers. At query time, TRACE combines vector-based note retrieval with graph-guided evidence search, generating validity-aware support paths and a hybrid context for answer generation. This design separates lexical recall from evidence reconstruction, enabling bounded query-time reasoning over long conversational histories. Experiments on long-conversation query-answering (QA) benchmarks show that TRACE improves temporal and multi-hop reasoning, with ablations highlighting the importance of hierarchy, update-aware seeding, and path-grounded evidence.

cs.CL↗

arXiv2026

Learn Weightlessness: Imitate Non-Self-Stabilizing Motions on Humanoid Robot

The integration of imitation and reinforcement learning has enabled remarkable advances in humanoid whole-body control, facilitating diverse human-like behaviors. However, research on environment-dependent motions remains limited. Existing methods typically enforce rigid trajectory tracking while neglecting physical interactions with the environment. We observe that humans naturally exploit a "weightless" state during non-self-stabilizing (NSS) motions--selectively relaxing specific joints to allow passive body--environment contact, thereby stabilizing the body and completing the motion. Inspired by this biological mechanism, we design a weightlessness-state auto-labeling strategy for dataset annotation; and we propose the Weightlessness Mechanism (WM), a method that dynamically determines which joints to relax and to what level, together enabling effective environmental interaction while executing target motions. We evaluate our approach on 3 representative NSS tasks: sitting on chairs of varying heights, lying down on beds with different inclinations, and leaning against walls via shoulder or elbow. Extensive experiments in simulation and on the Unitree G1 robot demonstrate that our WM method, trained on single-action demonstrations without any task-specific tuning, achieves strong generalization across diverse environmental configurations while maintaining motion stability. Our work bridges the gap between precise trajectory tracking and adaptive environmental interaction, offering a biologically-inspired solution for contact-rich humanoid control.

cs.RO↗