arXiv subjects

Haojie Dong

Publications and source records attributed to Haojie Dong.

9 recordsLinked to original sources

arXiv2026

Long-Delayed Afterpulse Measurement of JUNO 20-inch Photomultiplier Tubes

In large-scale liquid scintillator detectors such as the Jiangmen Underground Neutrino Observatory (JUNO), high-intensity events like cosmic muons induce photomultiplier tube (PMT) afterpulses that can interfere with the analysis of delayed physics signals. To systematically evaluate this instrumental background, we present a dedicated measurement of long-delayed afterpulses in two types of JUNO 20-inch PMTs: a dynode-based PMT and a microchannel-plate (MCP) PMT. The afterpulse time profiles were first characterized within a direct 1.8~ms waveform window and were further extended to 20~ms using a sliding-window readout strategy. Distinct long-delayed components are observed, revealing a strong dependence on the PMT multiplication structure. The dynode PMT exhibits a broad afterpulse component peaking at approximately 260~$\mu$s, whereas the MCP-PMT shows a pronounced peak around 90~$\mu$s, an additional component around 550~$\mu$s, and a much smaller, broadly distributed millisecond-scale component. For the microsecond-scale components, the afterpulse yield per primary photoelectron is at the $10^{-3}$ level in the selected delayed windows and increases approximately linearly with the primary light intensity. The accumulated delayed activity can therefore become non-negligible following high-intensity events. These quantitative findings provide critical inputs for PMT response characterization and for the accurate modeling of delayed correlated backgrounds in high-precision neutrino experiments.

hep-ex↗

arXiv2026

Final assessment of radioactive impurities in the JUNO detector

The Jiangmen Underground Neutrino Observatory (JUNO) collaboration has completed the construction of the 20,000-ton liquid scintillator detector and the associated muon veto detector system. To meet the physics objectives, the materials used in the detector must exhibit low radioactive contamination. The single-event rate in the fiducial volume (R $<$ 17.2 m) of the scintillator is required to be approximately 7 Hz for energies above 0.7 MeV, resulting in an accidental coincidence background of about 1 event per day for reactor neutrino physics analyses. Since the beginning of the construction phase, we have screened the natural radioactivity content of thousands of materials, to select those that meet the design background budget. The radioactive impurity concentrations of the materials ultimately used in the JUNO detector are summarized in this paper. The construction of the entire detector and the subsequent filling of the liquid scintillator were completed in August 2025. From the initial data, the total count rate of natural radioactivity within the detector's fiducial volume has met the requirements and is sufficient to support the reactor antineutrino analysis.

physics.ins-det↗

arXiv2026

A Low-energy Threshold and Multi-messenger Trigger System for the JUNO Experiment

The Jiangmen Underground Neutrino Observatory (JUNO) is a 20-kiloton liquid scintillator neutrino detector, located 650 meters (1800 m.w.e.) underground in Jiangmen, Guangdong, China. JUNO is primarily designed for reactor neutrino measurements and has been taking data since 2025. With the largest mass of its kind and an excellent energy resolution, JUNO is a leading observatory for high-precision measurements of MeV neutrinos. The standard global trigger system serves as the primary trigger for JUNO. We present a newly developed multi-messenger trigger system that extends the capabilities of the global trigger by providing a lower energy threshold and an independent monitoring capability. During the 2025 operation, it achieved an effective energy threshold of approximately 110 +/- 10 keV, providing a lower threshold configuration suitable for low-energy event analysis. The system shows the potential to further reduce the threshold to well below 100 keV. Based on the multi-messenger trigger system, an astrophysical monitor has been developed to receive and process external alerts from other messengers, such as gravitational-wave observations. A Transient Neutrino Burst Monitor is integrated to detect short-time-scale neutrino burst events and enables real-time monitoring of transient astrophysical phenomena. The system is sensitive to neutrino bursts from core-collapse supernovae within a distance of about 250 kpc.

hep-ex↗

arXiv2026

Test of the JUNO 20-inch PMTs during Installation

Photomultiplier tubes (PMTs) are widely used in neutrino experiments. As a new-generation neutrino observatory, JUNO requires an excellent energy resolution of 3% at 1 MeV. This will be realized with a 20 kton liquid scintillator detector instrumented with more than 20000 20-inch PMTs and 25600 3-inch PMTs. These PMTs were successfully installed in JUNO from October 2022 to December 2024. During the installation, seven test campaigns were performed to validate the PMT functionality, including measurements dark count rate, gain, waveform, and charge spectrum. In this paper, we present the implementation of these tests and the corresponding results for the 20-inch PMTs throughout the installation process.

physics.ins-det↗

arXiv2026

Embedded underwater front-end electronics for the 3-inch photomultipliers in the JUNO experiment

The Jiangmen Underground Neutrino Observatory (JUNO) is a 20-kton liquid scintillator-based, low-radioactivity, multi-purpose neutrino detector located 693 meters (1800 m.w.e.) underground in the Guangdong province, China. To detect scintillation light produced in the target, the detector is equipped with 17,612 20-inch photomultipliers (PMTs), forming the Large PMT system (LPMT). In addition, 25,600 3-inch photomultipliers (the Small Photomultiplier System or SPMT) are deployed in the gaps between the LPMTs. This paper presents the design and performance of the underwater front-end electronics developed for the SPMT system. It details the individual electronics boards and their key components, the inter-board interfaces, the system-level design, and the firmware architecture that supports data acquisition and control. It also outlines mechanical and thermal integration, board validation procedures, and system performance metrics. The readout chain includes digitization of 128 PMT channels per unit, synchronized time-stamping, charge measurement, event packaging, and bandwidth management. Comprehensive validation confirms the system's readiness to meet JUNO's stringent physics goals. The underwater electronics achieve noise levels as low as 0.04 photoelectrons with minimal crosstalk (below 0.4%) and a bandwidth of 57 MB/s, ensuring reliable single photo-electron detection and operation under high-rate conditions. The SPMT system has now been fully integrated and installed in JUNO. Its commissioning and physics performance will be reported in a future publication.

physics.ins-det↗

arXiv2025

Prospects for geoneutrino detection with JUNO

Geoneutrinos, which are antineutrinos emitted during the decay of long-lived radioactive elements inside Earth, serve as a unique tool for studying the composition and heat budget of our planet. The Jiangmen Underground Neutrino Observatory (JUNO) experiment in China, which has recently completed construction, is expected to collect a sample comparable in size to the entire existing world geoneutrino dataset in less than a year. This paper presents an updated estimation of sensitivity to geoneutrinos of JUNO using the best knowledge available to date about the experimental site, the surrounding nuclear reactors, the detector response uncertainties, and the constraints expected from the TAO satellite detector. To facilitate comparison with present and future geological models, our results cover a wide range of predicted signal strengths. Despite the significant background from reactor antineutrinos, the experiment will measure the total geoneutrino flux with a precision comparable to that of existing experiments within its first few years, ultimately achieving a world-leading precision of about 8% over ten years. The large statistics of JUNO will also allow separation of the Uranium-238 and Thorium-232 contributions with unprecedented precision, providing crucial constraints on models of formation and composition of Earth. Observation of the mantle signal above the lithospheric flux will be possible but challenging. For models with the highest predicted mantle concentrations of heat-producing elements, a 3-sigma detection over six years requires knowledge of the lithospheric flux to within 15%. Together with complementary measurements from other locations, the geoneutrino results of JUNO will offer cutting-edge, high-precision insights into the interior of Earth, of fundamental importance to both the geoscience and neutrino physics communities.

hep-ex↗

arXiv2025

Design, waterproofing, and mass production of the 3-inch PMT frontend system of JUNO

Over 25,600 3-inch photomultiplier tubes (PMTs) have been instrumented for the central detector of the Jiangmen Underground Neutrino Observatory. Each PMT is equipped with a high-voltage divider and a frontend cable with waterproof sealing. Groups of sixteen PMTs are connected to the underwater frontend readout electronics via specialized multi-channel waterproof connectors. This paper outlines the design and mass production processes for the high-voltage divider, the cable and connector, as well as the waterproof potting of the PMT bases. The results of the acceptance tests of all the integrated PMTs are also presented.

physics.ins-det↗

arXiv2025

Study on the Impact of Radioactive Background on the Dark Count Rate of 20-inch MCP-PMTs

This study systematically investigates the impact of natural radioactive background on the dark count rate (DCR) of 20-inch microchannel plate photomultiplier tubes (MCP-PMTs). Variations in PMT DCR under different radiation conditions were examined via underground tests, lead shielding experiments, and irradiation with $^{55}\mathrm{Fe}$, $^{60}\mathrm{Co}$, and $^{90}\mathrm{Sr}$ sources. The experimental results indicate that natural radioactivity from surrounding air and rock in the underground environment results in a significantly higher DCR compared to laboratory conditions. Further, lead shielding experiments confirmed that effective shielding can markedly reduce the interference from environmental background radiation. Notably, $\beta$ particles from the $^{90}\mathrm{Sr}$ source increased the DCR by approximately 14 kHz, whereas the effects of $\mathrm{X}$-rays from $^{55}\mathrm{Fe}$ and $\gamma$-rays from $^{60}\mathrm{Co}$ were comparatively minor. In addition, Geant4 simulations provided quantitative analysis of Cherenkov radiation induced by $\beta$ particles, with the simulation results closely matching the experimental data and confirming $\beta$ particles as the primary contributor to the DCR increase. These findings offer both theoretical and experimental evidence for a deeper understanding of the influence of radioactive background on 20-inch MCP-PMTs' performance in underground experiments and hold significant implications for improving the energy resolution of large-scale neutrino detection systems

hep-ex↗

arXiv2025

A Test System for the JUNO 20-inch PMTs Prior to Installation

The JUNO experiment requires an excellent energy resolution of 3\% at 1 MeV. To achieve this objective, a total of 20,012 20-inch photomultiplier tubes (PMTs) will be deployed for JUNO, comprising 15,012 multi-channel plate (MCP) PMTs and 5,000 dynode PMTs. Currently, JUNO is in the process of detector installation, with PMTs being installed from the top to the bottom of the stainless-steel structure located in the underground experimental hall. In order to validate the functionality of the PMTs and ensure there are no malfunctions prior to installation, a test system has been established at the JUNO site, and testing is being conducted. This paper presents an overview of the test system and reports on the initial test results.

physics.ins-det↗