arXiv subjects

Hao Su

Publications and source records attributed to Hao Su.

At least 19 recordsLinked to original sources

arXiv2026

Quantum lattice Boltzmann method via density-matrix encoding for fluid simulation with wall boundary conditions

The quantum lattice Boltzmann method (QLBM) holds promise for efficient fluid simulations, yet the treatment of realistic boundary conditions, particularly solid wall boundary with arbitrary geometry, remains a critical open challenge. We propose a QLBM algorithm that incorporates wall boundaries as well as inlet/outlet velocity conditions. Building upon the existing QLBM with ensemble transformations, we adopt a density-matrix encoding that offers greater flexibility in circuit design and enables the implementation of non-unitary operations through Kraus operators. For boundary enforcement, we design a quantum implementation of the half-way bounce-back scheme and introduce a component exchange step prior to the streaming step, which naturally enforces the no-slip condition without modifying the transport operation. Inlet and outlet conditions are imposed via controlled SWAP operations combined with ancilla registers prepared in the prescribed velocity states. Our QLBM is quantitatively validated through simulations of two-dimensional flows past a backward-facing step, a cylinder, and an obstacle with complex geometry, demonstrating both accuracy and extensibility of our boundary algorithm.

quant-ph↗

arXiv2026

Rapid Embodiment Adaptation for Quadrupedal Locomotion

Humans readily adapt their movements as their bodies change through aging, injury, or load carrying, but learning-based robot policies often break when hardware properties shift. We introduce an online embodiment adaptation framework for quadrupedal locomotion that infers embodiment parameters from short interaction histories and conditions control on the inferred hardware state. Our method pairs a generalist policy trained under embodiment randomization with a lightweight adaptation module that identifies physical changes within half a second. We evaluate two representative forms of embodiment variation: joint-range constraints and trunk-mass changes, corresponding to joint-level kinematic degradation and body-level dynamic variation. In simulation, the module accurately estimates these changes and enables closed-loop control that substantially outperforms policies conditioned directly on interaction history. On a real Unitree Go2 robot, our system maintains stable locomotion under severe instances of the evaluated changes, including a fully locked leg and a 5 kg payload, where non-adaptive methods fail. These results demonstrate the practicality of explicit online embodiment identification for rapid adaptation to joint-limit and payload-mass changes, and provide a step toward handling broader forms of uncertain, degraded, or changing robot hardware.

cs.RO↗

arXiv2026

MM-IssueLoc: A Controlled Benchmark for Evaluating Visual Evidence in Multimodal Repository-Level Issue Localization

Real repository issues routinely include visual evidence such as screenshots, error dialogs, rendered UI states, and logs, yet repository-level issue localization is evaluated mostly as a text-only task. Existing multimodal SE benchmarks evaluate end-to-end repair, entangling localization with patch synthesis and obscuring whether visual input helped, hurt, or was ignored. We introduce \textbf{MM-IssueLoc}, a controlled benchmark and evaluation protocol for repository-level localization with visual evidence. MM-IssueLoc contains 652 issue-PR instances across 23 languages, with annotations for 7 image categories and 4 relevance levels. It provides file-level and function-level gold labels, paired text-only and with-image evaluation, and VCE-based diagnostics that convert images into structured textual evidence. We evaluate LLM-based and retrieval-based systems, including MM-IssueLoc-VL-Emb as a controlled multimodal retriever. Results show that existing systems remain far from reliable multimodal repository localization: the strongest agent reaches 38.96 file Acc@5 and 22.45 function Acc@10, while the strongest retriever reaches 33.86 function Acc@10. Cross-benchmark comparisons show that high localization scores on text-dominant SWE benchmarks do not transfer cleanly to multimodal issue localization. MM-IssueLoc turns visual evidence into an explicit evaluation variable, enabling future work to test whether systems improve by using visual evidence for localization, rather than by relying on text-only cues or downstream patch-generation effects.

cs.SE↗

arXiv2026

Risk-Aware Selective Multimodal Driver Monitoring with Driver-State World Modeling

Continuous driver monitoring in automated vehicles requires low-latency inference while avoiding unsafe decisions under uncertain driver states. Large vision-language models provide broad multimodal priors, but their latency and limited reliability in this setting make them unsuitable as always-on in-cabin monitors. We propose a cost-aware selective inference framework for deployable multimodal driver monitoring. The core system is a lightweight RGB-physiological student that combines in-cabin visual observations with window-level HR/EDA signals, and a learned gate that decides when to accept the fast prediction or abstain for safety intervention. Additional controls show that the learned scores contain sample-level information beyond scenario priors, while exact physiological synchronization remains a limitation. To incorporate predictive evidence, we further study a compact driver-state world modeling module that rolls out latent driver-state features and estimates future fast-model errors and counterfactual system-level action costs. On scenario-induced driver-demand recognition, the RGB-physiological student improves over RGB-only and physiology-only baselines, reaching 0.7440 Macro-F1 and 0.9099 balanced accuracy with 11.39M parameters and 3.08ms inference latency. Cost-aware selective inference reduces unsafe false negatives from 17.37% under always-fast inference to approximately 5% across seeds, while maintaining deployment-level latency. While driver-state world modeling offers valuable predictive signals, worst-group evaluations highlight persistent operating-point calibration drift. Ultimately, reliable edge driver monitoring requires advancing not only perception backbones, but also risk-aware selective control and group-robust calibration.

cs.RO↗

arXiv2026

SAGE-Nav: Leveraging LLM Planning and Alignment Fusion for Hierarchical Scene Graph-Guided Navigation

Object-Goal Navigation (ObjNav) requires embodied agents to autonomously locate specified targets using only egocentric visual observations. Existing monolithic methods struggle with long-horizon reasoning and generalize poorly to novel environments. To address these limitations, we propose SAGE-Nav, a novel hierarchical framework that integrates the reasoning capabilities of Large Language Models (LLMs) with dynamic scene graphs. Crucially, it decouples asynchronous global semantic planning from the high-frequency reactive control loop. The LLM serves as a global planner, decomposing abstract instructions into a sequence of semantically grounded waypoints. To translate these plans into dense multi-modal guidance, we design a Hierarchical Scene Graph Encoder (HSGE) that leverages relational graph convolutions to produce structure-aware embeddings preserving both semantic and spatial topology. Furthermore, we develop the Goal-aware Alignment-Fusion Network (GAFN) to dynamically fuse real-time perception with these structural priors. Using an adaptive gating mechanism with an explicit inductive bias, GAFN ensures robust visual-topological alignment for the low-level policy. Extensive evaluations in the i-THOR and RoboTHOR environments demonstrate that SAGE-Nav achieves state-of-the-art performance, delivering substantial gains in navigation efficiency and zero-shot generalization while maintaining the low control latency required for physical robotic deployment.

cs.RO↗

arXiv2026

DriveStack-VLA: Render-Teacher Alignment for BEV-Based DeepStack Vision-Language-Action Model

Vision-Language-Action driving models convert a pretrained Vision-Language Model into a driving policy, allowing them to use world knowledge and follow language guidances. However, existing VLA driving models still lack driving-oriented spatial intelligence: their policies are mainly grounded on perspective image tokens and language priors, while precise motion planning requires metric geometry, top-down scene structure, and attention to safety-critical perceptual cues. This limitation makes current models vulnerable to weak visual geometry modeling and perceptual coverage in expert demonstrations. In this paper, we present DriveStack-VLA, a framework built upon a large VLM backbone. To strengthen the spatial grounding of VLA driving, we develop dual visual modeling components. We inject a Bird-Eye-View representation into the Large Language Model decoder through a DeepStack-style connection, and propose Render-Teacher Alignment to align the perceptual focus of real images with that of rasterized images. Furthermore, to bridge the gap in multimodal trajectory selection, we introduce a head-based self-critique module that ranks sampled trajectories and conditionally refines the best one. DriveStack-VLA achieves 91.6 PDMS on NAVSIMv1, 91.0 EPDMS on NAVSIMv2 (with the human penalty filter enabled), and a driving score of 79.49 with a success rate of 56.36\% on the closed-loop Bench2Drive. More visualizations are available on our project page: https://anonymous.4open.science/w/drivestack-vla/.

cs.CV↗

arXiv2026

TacCoRL: Integrating Tactile Feedback into VLA via Simulation

Vision-language-action (VLA) models provide strong visual, language, and action priors for robot manipulation, but visual observations alone often miss the local contact state required for contact-rich tasks. We present TacCoRL, a scalable framework that injects Tactile feedback into VLA policies and improves them through sim-real Co-training and simulation-based reinforcement learning (RL), without requiring large-scale tactile pretraining or extensive real-world contact exploration. The key idea is not only adding touch as an input, but learning how contact readings should modulate action responses in near-failure states that are rare in demonstrations and risky to collect on hardware. We use a real-aligned simulator as a closed-loop training environment for contact interaction. Mixed simulated and real trajectories first warm-start tactile-conditioned actions in the pretrained policy. Reinforcement learning with verifiable task rewards then optimizes the policy using simulated contact rollouts. It reinforces tactile-conditioned actions that lead to task completion, while a supervised objective on real trajectories keeps the refined policy anchored to deployment visual, tactile, and action distributions. The resulting policy transfers directly to the real robot without privileged simulation state or online real-world RL. Across four bimanual contact-rich tasks, the final visuo-tactile policy achieves an average success rate of 72.5%, compared to baseline of 50.0%. Result videos and more details are available at https://tac-corl.github.io/

cs.RO↗

arXiv2026

Driver-WM: A Driver-Centric Traffic-Conditioned Latent World Model for In-Cabin Dynamics Rollout

Safe L2/L3 driving automation requires anticipating human-in-the-loop reactions during shared-control transitions. While most driving world models forecast the external environment, in-cabin intelligence remains strictly recognition-oriented and lacks multi-step rollout capabilities for driver dynamics. We introduce Driver-WM, a driver-centric latent world model that rolls out in-cabin dynamics causally conditioned on out-cabin traffic context. This formulation unifies physical kinematics forecasting with auxiliary behavioral and emotional semantic recognition. Operating in a compact latent space constructed from frozen vision-language features, Driver-WM adopts a dual-stream architecture to separately encode external traffic and internal driver states. These streams are directionally coupled via a gated causal injection mechanism, which uses a learned vector gate to modulate external contextual perturbations while strictly enforcing temporal causality. Experiments on AIDE show robust long-horizon forecasting on reactive high-motion clips, improved driver/traffic semantic alignment, and controlled interventions that expose the external-to-internal mechanism.

cs.RO↗

arXiv2026

AnyHand: A Large-Scale Synthetic Dataset for RGB(-D) Hand Pose Estimation

We present AnyHand, a large-scale synthetic dataset designed to advance the state of the art in 3D hand pose estimation. While recent works with foundation approaches have shown that scaling training data markedly improves hand pose estimation, existing real-world datasets are limited in coverage, and prior synthetic datasets rarely provide occlusions, arm details, and aligned depth together at scale. To address this bottleneck, our proposed AnyHand contains 2.5M single-hand and 4.1M hand-object interaction RGB-D images, with rich geometric annotations. We show that extending the original training data recipes of existing RGB baselines with AnyHand yields significant gains on multiple benchmarks (FreiHAND and HO-3D), even when keeping the architectures and training schemes fixed. Together with extensive ablations on the scale and composition of the training data setups, these results suggest that training data diversity and quality are as critical as scale for advancing hand pose estimation. We further examine the utility of AnyHand's aligned depth maps in the appendix, showing that scaling RGB-D supervision with AnyHand allows a lightweight depth-fusion variant of existing RGB baselines to outperform prior RGB-D methods.

cs.CV↗

arXiv2026

Event-Driven Proactive Assistive Manipulation with Grounded Vision-Language Planning

Assistance in collaborative manipulation is often initiated by user instructions, making high-level reasoning request-driven. In fluent human teamwork, however, partners often infer the next helpful step from the observed outcome of an action rather than waiting for instructions. Motivated by this, we introduce a shift from request-driven assistance to event-driven proactive assistance, where robot actions are initiated by workspace state transitions induced by human--object interactions rather than user-provided task instructions. To this end, we propose an event-driven framework that tracks interaction progress with an event monitor and, upon event completion, extracts stabilized pre/post snapshots that characterize the resulting state transition. Given the stabilized snapshots, the planner analyzes the implied state transition to infer a task-level goal and decide whether to intervene; if so, it generates a sequence of assistive actions. To make outputs executable and verifiable, we restrict actions to a set of action primitives and reference objects via integer IDs. We evaluate the framework on a real tabletop number-block collaboration task, demonstrating that explicit pre/post state-change evidence improves proactive completion on solvable scenes and appropriate waiting on unsolvable ones.

cs.RO↗

arXiv2026

Toward Generalist Neural Motion Planners for Robotic Manipulators: Challenges and Opportunities

State-of-the-art generalist manipulation policies have enabled the deployment of robotic manipulators in unstructured human environments. However, these frameworks struggle in cluttered environments primarily because they utilize auxiliary modules for low-level motion planning and control. Motion planning remains challenging due to the high dimensionality of the robot's configuration space and the presence of workspace obstacles. Neural motion planners have enhanced motion planning efficiency by offering fast inference and effectively handling the inherent multi-modality of the motion planning problem. Despite such benefits, current neural motion planners often struggle to generalize to unseen, out-of-distribution planning settings. This paper reviews and analyzes the state-of-the-art neural motion planners, highlighting both their benefits and limitations. It also outlines a path toward establishing generalist neural motion planners capable of handling domain-specific challenges. For a list of the reviewed papers, please refer to https://davoodsz.github.io/planning-manip-survey.github.io/.

cs.RO↗

arXiv2026

SG-VLA: Learning Spatially-Grounded Vision-Language-Action Models for Mobile Manipulation

Vision-Language-Action (VLA) models show promise for robotic control, yet performance in complex household environments remains sub-optimal. Mobile manipulation requires reasoning about global scene layout, fine-grained geometry, and high-dimensional continuous actions, making standard imitation learning insufficient. We introduce a framework for learning spatially-grounded VLA models that strengthens perception and representation through auxiliary task co-training and multi-modal input enhancement. Our method addresses the challenge of controlling a 13-dimensional action space involving coordinated base motion, arm articulation, and gripper actuation. To enrich spatial understanding, the model incorporates multi-view RGB observations, depth cues, and short temporal history, providing perspectives of both global scene structure and local manipulation context. To improve representation quality, we co-train auxiliary decoders that reconstruct interpretable intermediate signals - including global robot position, joint configurations, grasp affordances, target-object relative pose, and segmentation masks - from shared visual-language features. These objectives provide dense supervision that encourages the backbone to develop spatially grounded, manipulation-aware latent representations. Through extensive evaluation on home rearrangement tasks, our approach achieves consistent improvements across picking, placing, opening, and closing operations, substantially outperforming direct imitation learning. Our findings suggest that spatial grounding through auxiliary and multi-modal learning provides a strong direction for scaling VLA models toward general-purpose domestic robots.

cs.RO↗

arXiv2026

M-ABD: Scalable, Efficient, and Robust Multi-Affine-Body Dynamics

Simulating large-scale articulated assemblies poses a significant challenge due to the numerical stiffness and geometric complexity of jointed structures. Conventional rigid body solvers struggle with the high nonlinearity induced by rotation parameterization. This difficulty becomes more pronounced for multiple two-way-coupled bodies. This paper introduces a novel framework that leverages the linear kinematic mapping of Affine Body Dynamics (ABD). As ABD targets near-rigid objects, the constitutive variations of different materials become negligible, which justifies a co-rotational approach to isolate geometric nonlinearities of the system. This insight enables the use of constant system matrices that can be pre-factorized throughout the simulation, even with fully implicit integration schemes. To manage the high DOF counts of large-scale systems, we map primal body coordinates onto a compact dual space defined by minimal joint degrees of freedom. By solving the resulting KKT systems, our method ensures exact constraint enforcement and physically accurate motion propagation. We provide a suite of specialized solvers tailored for diverse joint topologies, including chains, trees, closed loops, and irregular networks. Experimental results show that our approach achieves interactive rates for systems with hundreds of thousands of bodies on a single CPU core, while maintaining excellent stability at large time steps.

cs.GR↗

arXiv2026

PhysMem: Scaling Test-Time Memory for Embodied Physical Reasoning

Reliable object manipulation requires understanding physical properties that vary across objects and environments. Vision-language model (VLM) planners can reason about friction and stability in general terms; however, they often cannot predict how a specific ball will roll on a particular surface or which stone will provide a stable foundation without direct experience. We present PhysMem, a memory framework that enables VLM robot planners to learn physical principles from interaction at test time, without updating model parameters. The system records experiences, generates candidate hypotheses, and verifies them through targeted interaction before promoting validated knowledge to guide future decisions. A central design choice is verification before application: the system tests hypotheses against new observations rather than applying retrieved experience directly, reducing rigid reliance on prior experience when physical conditions change. We evaluate PhysMem on three real-world manipulation tasks and simulation benchmarks across four VLM backbones. On a controlled brick insertion task, principled abstraction achieves 76% success compared to 23% for direct experience retrieval, and real-world experiments show consistent improvement over 30-minute deployment sessions.

cs.RO↗

arXiv2026

MPM Lite: Linear Kernels and Integration without Particles

In this paper, we introduce MPM Lite, a new hybrid Lagrangian/Eulerian method that eliminates the need for particle-based quadrature at solve time. Standard MPM practices suffer from a performance bottleneck where expensive implicit solves are proportional to particle-per-cell (PPC) counts due to the the choices of particle-based quadrature and wide-stencil kernels. In contrast, MPM Lite treats particles primarily as carriers of kinematic state and material history. By conceptualizing the background Cartesian grid as a voxel hexahedral mesh, we resample particle states onto fixed-location quadrature points using efficient, compact linear kernels. This architectural shift allows force assembly and the entire time-integration process to proceed without accessing particles, making the solver complexity no longer relate to particles. At the core of our method is a novel stress transfer and stretch reconstruction strategy. To avoid non-physical averaging of deformation gradients, we resample the extensive Kirchhoff stress and derive a rotation-free deformation reference solution, which naturally supports an optimization-based incremental potential formulation. Consequently, MPM Lite can be implemented as modular resampling units coupled with an FEM-style integration module, enabling the direct use of off-the-shelf nonlinear solvers, preconditioners, and unambiguous boundary conditions. We demonstrate through extensive experiments that MPM Lite preserves the robustness and versatility of traditional MPM across diverse materials while delivering significant speedups in implicit settings and improving explicit settings at the same time. Check our project page at https://mpmlite.github.io.

cs.GR↗

arXiv2026

TouchGuide: Inference-Time Steering of Visuomotor Policies via Touch Guidance

Fine-grained and contact-rich manipulation remain challenging for robots, largely due to the underutilization of tactile feedback. To address this, we introduce TouchGuide, a novel cross-policy visuo-tactile fusion paradigm that fuses modalities within a low-dimensional action space. Specifically, TouchGuide operates in two stages to guide a pre-trained diffusion or flow-matching visuomotor policy at inference time. First, the policy produces a coarse, visually-plausible action using only visual inputs during early sampling. Second, a task-specific Contact Physical Model (CPM) provides tactile guidance to steer and refine the action, ensuring it aligns with realistic physical contact conditions. Trained through contrastive learning on limited expert demonstrations, the CPM provides a tactile-informed feasibility score to steer the sampling process toward refined actions that satisfy physical contact constraints. Furthermore, to facilitate TouchGuide training with high-quality and cost-effective data, we introduce TacUMI, a data collection system. TacUMI achieves a favorable trade-off between precision and affordability; by leveraging rigid fingertips, it obtains direct tactile feedback, thereby enabling the collection of reliable tactile data. Extensive experiments on five challenging contact-rich tasks, such as shoe lacing and chip handover, show that TouchGuide consistently and significantly outperforms state-of-the-art visuo-tactile policies.

cs.RO↗

arXiv2026

Advances and Innovations in the Multi-Agent Robotic System (MARS) Challenge

Recent advancements in multimodal large language models and vision-languageaction models have significantly driven progress in Embodied AI. As the field transitions toward more complex task scenarios, multi-agent system frameworks are becoming essential for achieving scalable, efficient, and collaborative solutions. This shift is fueled by three primary factors: increasing agent capabilities, enhancing system efficiency through task delegation, and enabling advanced human-agent interactions. To address the challenges posed by multi-agent collaboration, we propose the Multi-Agent Robotic System (MARS) Challenge, held at the NeurIPS 2025 Workshop on SpaVLE. The competition focuses on two critical areas: planning and control, where participants explore multi-agent embodied planning using vision-language models (VLMs) to coordinate tasks and policy execution to perform robotic manipulation in dynamic environments. By evaluating solutions submitted by participants, the challenge provides valuable insights into the design and coordination of embodied multi-agent systems, contributing to the future development of advanced collaborative AI systems.

cs.RO↗

arXiv2025

House of Dextra: Cross-embodied Co-design for Dexterous Hands

Dexterous manipulation is limited by both control and design, without consensus as to what makes manipulators best for performing dexterous tasks. This raises a fundamental challenge: how should we design and control robot manipulators that are optimized for dexterity? We present a co-design framework that learns task-specific hand morphology and complementary dexterous control policies. The framework supports 1) an expansive morphology search space including joint, finger, and palm generation, 2) scalable evaluation across the wide design space via morphology-conditioned cross-embodied control, and 3) real-world fabrication with accessible components. We evaluate the approach across multiple dexterous tasks, including in-hand rotation with simulation and real deployment. Our framework enables an end-to-end pipeline that can design, train, fabricate, and deploy a new robotic hand in under 24 hours. The full framework and generated robot hands are open-sourced and available on our website.

cs.RO↗