arXiv subjects

Hao Hong

Publications and source records attributed to Hao Hong.

13 recordsLinked to original sources

arXiv2026

A Projection-Coupled 2.5D THB-GIFT and Quadtree-SBIGA Formulation for Moving-Load Analysis in Semi-Infinite Media

Moving loads in semi-infinite media generate extended wave fields while complex local structures require fine geometric and spatial resolution. This paper develops a projection-coupled two-and-a-half-dimensional (2.5D) THB-GIFT and quadtree-SBIGA computational formulation that assigns independent discretizations to these regions. The near-field THB-GIFT representation separates the geometry and analysis spaces and permits hierarchical local refinement, while the bounded propagation domain is discretized by quadtree-SBIGA with unified Bézier trace extraction and connected to the homogeneous unbounded exterior through a scaled-boundary impedance. On a common physical integration partition, an $L^2$ projection maps the nonmatching traces; Hermitian-adjoint force transfer then gives a virtual-work-consistent interface reduction. The regional dynamic operators and moving-load response reconstruction follow a single Fourier convention. Homogeneous half-space comparisons and a cylindrical-cavity analytical solution verify the components and the complete coupled system. In the cavity study, hierarchical THB refinement reduces the displacement error in the target inner band by a factor of approximately $41$. At a specified frequency--wavenumber point in the cavity benchmark, a comparison with matched outer-boundary discretization gives approximately $15\%$ lower sampled full-domain error for the coupled model, using $34\%$ fewer system degrees of freedom and $48\%$ fewer S-elements; the warm per-sample times are similar. A layered pavement with a buried conduit and twin modified-D tunnels demonstrate open, closed and multiple disconnected nonmatching interfaces and the analysis of local structural demand and dynamic interaction under moving loads.

cs.CE↗

arXiv2026

Collective sliding relaxor ferroelectricity across thousand-layer van der Waals superstructures

Relaxor ferroelectrics are among the most important electromechanical materials owing to their exceptionally large electrostrictive responses. However, conventional relaxor behavior is generally associated with chemical complexity and structural disorder, where local compositional fluctuations generate polar nanoregions, making the microscopic origin of this behavior difficult to control and engineer. Here we report sliding relaxor ferroelectricity (S-RFE), a previously unknown relaxor state in which engineered stacking-phase heterogeneity enables cooperative interlayer sliding to generate collective relaxor behavior. Through stacking-phase engineering in rhombohedral boron nitride, we create sliding domains that act as structural analogues of polar nanoregions and cooperatively align under an electric field through interlayer sliding. This collective state produces reversible electromechanical deformation of up to approximately $-1.6\%$ with negligible hysteresis in approximately 300-nm-thick crystals, corresponding to approximately 1000 atomic layers. The resulting electrostriction coefficient ($Q_{33}$ of approximately $1200\,\mathrm{m}^{4}\mathrm{C}^{-2}$) exceeds those of most crystalline electrostrictors by orders of magnitude. Unlike conventional relaxors, whose electromechanical response is often suppressed by dipolar freezing at low temperatures, S-RFE remains active down to 1.6 K and maintains giant electromechanical functionality. Our results establish sliding relaxor ferroelectricity as a new route to relaxor behavior and reveal how atomic-scale interlayer motion can be amplified into collective mesoscale functionality across approximately one thousand layers, providing a materials-by-design platform for electromechanical, photonic, and quantum technologies based on van der Waals materials.

cond-mat.mtrl-sci↗

arXiv2026

A 2.5D NURBS-Trace Infinite-Element Method for Moving-Load Wave Propagation and Soil--Structure Interaction in Semi-Infinite Ground

For moving-load problems whose geometry and material properties are approximately invariant along the traveling direction, 2.5D analysis retains three displacement components at lower cost than full three-dimensional discretization. We present a 2.5D Non-Uniform Rational B-spline (NURBS)-trace infinite-element method (NBIEM), formulated as a coupled finite/infinite-element scheme, for wave propagation in linear viscoelastic semi-infinite geotechnical media. The bounded near field is discretized by isogeometric analysis, while the exterior is represented by tensor products of the boundary NURBS basis and admissible outgoing or evanescent exponential radial functions. Both subdomains share the same NURBS trace space and control-point degrees of freedom, enforcing displacement continuity without projection or mortar variables. For the selected radial functions, far-field stiffness and mass contributions are evaluated through closed-form radial moments, eliminating finite radial cutoff and radial quadrature. Closed-form half-space solutions verify displacement and stress frequency-response functions in sub-Rayleigh, super-shear but sub-compressional, and super-compressional moving-load regimes. Low-frequency studies assess sensitivity to radial parameters and artificial-boundary placement. Additional tests examine complex-valued response accuracy, phase fidelity, computational cost, and the frequency-dependent working range of the default S-wave-informed exterior realization. Applications to layered media, track--subgrade systems, and buried structures demonstrate the ability to handle heterogeneous materials, multi-patch configurations, curved interfaces, and cover-depth-dependent geotechnical responses. The framework provides a geometrically consistent and computationally efficient treatment of moving-load wave propagation and soil--structure interaction in semi-infinite domains.

cs.CE↗

arXiv2026

High-Density Horizontal Arrays of Single-Chirality Carbon Nanotubes

Highly ordered high-density arrays of single-chirality single-walled carbon nanotubes (SWCNTs) are greatly desired for exploring the intrinsic anisotropic properties and collective performance of such 1-dimensional (1D) nanomaterials. Here we present a Marangoni flow-induced self-assembly (MISA) strategy to fabricate monolayered SWCNT arrays achieving a packing density of ~200 ${μm}^{-1}$ and a 2-dimensional order parameter ($S_{2\mathrm{D}}$) of ~0.95. Relying on its general compatibility with both organic and aqueous dispersions, we prepare single-chirality and enantiomer-pure SWCNT arrays from organic and aqueous dispersions resulting from the sorting processes. The anisotropic optical and electrical properties of the arrays are demonstrated by the polarization-dependent Rabi splitting as well as polarized near-infrared light emission and detection. With the great tolerance to solutions, substrates, and materials, as well as the feasibility and controllability, MISA shows great potential in the assembly of 1D nanomaterials.

cond-mat.mtrl-sci↗

arXiv2026

Development and Performance Study of Vertical GaN $α$-Particle Detector with High Energy Resolution

High-energy-resolution GaN $α$-particle detectors have significant potential for space radiation, nuclear instrumentation, and harsh-environment applications. However, existing GaN $α$-particle detectors still face several key challenges, including reducing the dead-layer thickness, suppressing leakage current under high reverse bias, improving energy resolution, and clarifying the physical mechanism underlying the low-energy tail phenomenon. This study presents a vertical homoepitaxial GaN $α$-particle detector integrating a 20-nm ultrathin dead layer and a guard-ring structure. The detector exhibits an ultralow leakage current of 2.195 nA at -200 V and an intrinsic energy resolution of 2.69% with a charge collection efficiency (CCE) of 95.9% at -260 V. More importantly, this work demonstrates for the first time through Geant4 simulations that depletion-width nonuniformity is the dominant source of partial energy leakage, leading to an extended low-energy tail in the energy spectrum. We establish a depletion-width nonuniformity model and observe good agreement between simulation and experiment. This finding provides practical guidance for the design and optimization of high-performance GaN-based radiation detectors.

physics.ins-det↗

arXiv2026

Deep-ultraviolet Cherenkov radiation in all-normal-dispersion waveguide enabled by spatial-temporal dynamics

Nonlinear propagation of ultrashort pulses in multi-mode waveguides, featuring complex spatial-temporal dynamics, provides new degrees of freedom in the fields of nonlinear optics and ultrafast lasers. Here, we demonstrate a new scheme of ultraviolet Cherenkov (dispersive-wave) radiation in a gas-filled capillary with unprecedently-high pulse energy, enabled by spatial-temporal dynamics. We found that mJ-level, 40-fs pulses, launched into a large-core capillary filled with high-pressure noble gas, would experience self-phase-modulation and self-steepening effects in this normal-dispersion waveguide, leading to high-intensity shock wave generation and asymmetric spectral broadening. Spatial-temporal dynamics, stemming from strong nonlinear inter-mode coupling, causes spatial shrink and temporal deceleration of the pulse which dramatically alter the capillary dispersion landscape. As a result, a phase-matching point can be created in the ultraviolet, giving rise to the radiation of multi-mode dispersive waves with 100-μJ-level pulse energies and few-fs pulse widths. Our findings inspire new insights into multi-mode nonlinear optics, and the demonstrated high-energy ultraviolet light source with broadband tunability and compact set-up configuration, may find a few applications in time-resolved spectroscopy, ultrafast electronics and femtosecond chemistry.

physics.optics↗

arXiv2025

Observation of tunable chiral spin textures with nonlinear optics

Chiral spin textures, such as spin spirals and skyrmions, are key to advancing spintronics by enabling ultrathin, energy-efficient memory, and high-density data storage and processing. However, their realization remains hindered by the scarcity of suitable host materials and the formidable experimental challenges associated with the characterization of these intricate chiral magnetic states. Here, we report the observation of tunable chiral magnetic textures in van der Waals magnet CrPS$_4$ with nonlinear optics. These tunable textures exhibit strong chiral third-order nonlinear optical responses, driven by interlayer and intralayer spin couplings under varying magnetic fields and temperatures. These pronounced chiral nonlinear optical responses highlight the potency and high sensitivity of the nonlinear optical readout for probing non-collinear magnetic orders. Moreover, our findings position van der Waals magnets and their heterostructures as an exceptional platform for reconfigurable spin-photonics and spintronics, unifying optical, electrical, and magnetic properties through unique intralayer and interlayer spin coupling properties and effective spin interaction between photons and electrons.

cond-mat.mes-hall↗

arXiv2025

Roadmap for Photonics with 2D Materials

Triggered by the development of exfoliation and the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals currently constitute a wide research field protruding in multiple directions in combination with layer stacking and twisting, nanofabrication, surface-science methods, and integration into nanostructured environments. Photonics encompasses a multidisciplinary collection of those directions, where 2D materials contribute with polaritons of unique characteristics such as strong spatial confinement, large optical-field enhancement, long lifetimes, high sensitivity to external stimuli (e.g., electric and magnetic fields, heating, and strain), a broad spectral range from the far infrared to the ultraviolet, and hybridization with spin and momentum textures of electronic band structures. The explosion of photonics with 2D materials as a vibrant research area is producing breakthroughs, including the discovery and design of new materials and metasurfaces with unprecedented properties as well as applications in integrated photonics, light emission, optical sensing, and exciting prospects for applications in quantum information, and nanoscale thermal transport. This Roadmap summarizes the state of the art in the field, identifies challenges and opportunities, and discusses future goals and how to meet them through a wide collection of topical sections prepared by leading practitioners.

cond-mat.mtrl-sci↗

arXiv2025

Phase-matching of high harmonic generation in twisted solids

High harmonic generation (HHG) in solids could enable attosecond and ultraviolet light sources with high compactness, great controllability and rich functions. However, the HHG process is accompanied by a quite large wavevector mismatch that is uncompensated by any traditional phase-matching method, directly limiting its energy conversion efficiency. Here, we propose an effective strategy for phase-matching of HHG with arbitrary harmonic orders in solids. Two flakes of solids with an interlayer twist induce a nonlinear optical phase that depends on the crystal symmetry, twist angle and harmonic order, which can be accurately designed to compensate for the phase mismatch in HHG. Guided by the twist-phase-matching theory, we achieved a record-high conversion efficiency of $~1.5\times10^{-5}$ for the fifth HHG in twisted hexagonal boron nitride crystals with a total thickness of only 1 $μm$. Our work establishes a foundation for developing ultrashort-wavelength and ultrafast-pulse laser sources in compact solid-state tabletop systems for fundamental and applied sciences.

physics.optics↗

arXiv2023

Giant nonlinear optical wave mixing in van der Waals compound MnPSe3

Optical nonlinearities, one of the most fascinating properties of two-dimensional (2D) materials, are essential for exploring novel physics in 2D systems and developing next-generation nonlinear optical applications. While tremendous efforts have been made to discover and optimize second-order nonlinear optical responses in various 2D materials, higher odd-order nonlinear processes, which are in general much less efficient than second order ones, have been paid less attention despite their scientific and applicational significance. Here we report giant odd-order nonlinear optical wave mixing in a correlated van der Waals insulator MnPSe3 at room temperature. Illuminated by two near-infrared femtosecond lasers simultaneously, it generates a series of degenerate and non-degenerate four- and six-wave mixing outputs, with conversion efficiencies up to the order of $10^{-4}$ and $10^{-6}$ for the four- and six-wave mixing processes, respectively, far exceeding the efficiencies of several prototypical nonlinear optical materials (GaSe, LiNbO3). This work highlights the intriguing prospect of transition metal phosphorous trichalcogenides for future research of the nonlinear light matter interactions in 2D systems and for potential nonlinear photonic applications.

physics.optics↗

arXiv2023

Twist-phase-matching in two-dimensional materials

Optical phase-matching involves establishing a proper phase relationship between the fundamental and generated waves to enable efficient optical parametric processes. It is typically achieved through either birefringence or periodically assigned polarization. Here, we report that twist angle in two-dimensional (2D) materials can generate a nonlinear Berry optical phase to compensate the phase mismatch in the process of nonlinear optical frequency conversion, and the vertical assembly of 2D layers with a proper twist sequence will generate a nontrivial "twist-phase-matching" (twist-PM) regime. The twist-PM model offers superior flexibility in the design of optical crystals, which works for twisted layers with either periodic or random thickness distribution. The designed crystals from twisted rhombohedra boron nitride films give rise to a second-harmonic generation conversion efficiency of ~8% within a thickness of only 3.2 um, and a facile polarization controllability that is absent in conventional crystals (from linear to left-/right-handed circular/elliptical polarizations). Our methodology establishes a platform for the rational designing and atomic manufacturing of nonlinear optical crystals based on abundant 2D materials for various functionalities.

physics.optics↗

arXiv2020

Unravelling a Zigzag Pathway for Hot-Carrier Collection at CH3NH3PbI3/Graphene Interfaces

The capture of photoexcited deep-band hot carriers, excited by photons with energies far above the bandgap, is of significant importance for photovoltaic and photoelectronic applications since it is directly related to the quantum efficiency of photon-to-electron conversion. By employing time-resolved photoluminescence and state-of-the-art time-domain density functional theory, we reveal that photoexcited hot carriers in organic-inorganic hybrid perovskites prefer a zigzag interfacial charge-transfer pathway, i.e., the hot carriers transfer back and forth between CH3NH3PbI3 and graphene, before they reach a charge separated state. Driven by quantum coherence and interlayer vibrational modes, this pathway at the semiconductor-graphene interface takes about 400 femtoseconds, much faster than the relaxation process within CH3NH3PbI3 (in several picoseconds). We further demonstrate that the transfer rate of the pathway can be further enhanced by interfacial defects. Our work provides a new insight for the fundamental understanding and precise manipulation of hot-carrier dynamics at the complex semiconductor-graphene interfaces, paving the way for highly efficient photovoltaic and photoelectric device optimization.

cond-mat.mtrl-sci↗

arXiv2017

Ultrafast, highly-sensitive infrared photodetectors based on two-dimensional oxyselenide crystals

Infrared detection and sensing is deeply embedded in modern technology and human society and its development has always been benefitting from the discovery of new photoelectric response materials. The rise of two-dimensional (2D) materials, thanks to their distinct electronic structure, extreme dimensional confinement and strong light-matter interactions, provides new material platform for next-generation infrared photodetection. Ideal infrared detectors should have fast respond, high sensitivity and air-stability, which is rare to meet at the same time for all existing 2D materials, either graphene, transition metal dichalcogenide or black phosphorous. Herein we demonstrate a new infrared photodetector based on 2D Bi2O2Se crystals, whose main characteristics are superb in the whole 2D family: high sensitivity of ~65 A/W at 1200 nm and ultrafast intrinsic photoresponse of ~1 ps at room temperature. Such great performance is attributed to the suitable electronic bandgap and high carrier mobility of 2D oxyselenide. With additional merits of mass production, excellent stability and flexibility, 2D oxyselenide detectors should open new avenues in highly-sensitive, high-speed, low-cost, flexible infrared photodetection and imaging.

cond-mat.mtrl-sci↗