arXiv ScienceSearch

arXiv subjects

Hany Assasa

Publications and source records attributed to Hany Assasa.

4 recordsLinked to original sources

Packet-Level Complex CIR Tracking for Communication-Native mmWave Sensing: An 802.11ad Testbed

Commercial millimetre-wave (mmWave) Wi-Fi platforms based on IEEE 802.11ad/ay have demonstrated sensing capabilities, but they provide limited visibility into the packet-level measurements and synchronisation mechanisms that determine temporal coherence. We present a programmable 60~GHz IEEE 802.11ad testbed that exposes the complete complex 128-tap channel impulse response (CIR) for every detected packet. This access exposes packet-to-packet delay shifts and common phase drift that commercial-transceiver studies generally do not characterise. We develop a delay-profile alignment method and define a static-reference relative CIR phase that cancels common drift while preserving target-induced variation. We use 30~s respiration sensing to evaluate long-term phase stability for sub-wavelength motion tracking. Across 39 recordings, median absolute waveform correlation increases from 0.41 (timestamp regularised) to 0.52 (delay aligned) and 0.61 (relative-phase calibrated); breathing-rate mean absolute error decreases from 5.1 to 4.1 and 3.6~breaths/min. The results demonstrate controlled characterisation and stabilisation of communication-native WiGig CIR measurements on a fully programmable physical layer.

eess.SP

Can Millimeter-Wave Support Interactive Extended Reality Under Rapid Rotational Motion?

Using Millimeter-Wave (mmWave) wireless communications is often named as the prime enabler for mobile interactive Extended Reality (XR), as it offers multi-gigabit data rates at millisecond-range latency. To achieve this, mmWave nodes must focus their energy towards each other, which is especially challenging in XR scenarios, where the transceiver on the user's XR device may rotate rapidly. To evaluate the feasibility of mmWave XR, we present the first throughput and latency evaluation of state-of-the-art mmWave hardware under rapid rotational motion, for different PHY and MAC-layer parameter configurations. We show that this parameter configuration has a significant impact on performance, and that specialized beamforming approaches for rapid rotational motion may be necessary to enable uninterrupted, high-quality mobile interactive XR experiences.

cs.NI

Opportunities and Challenges for Virtual Reality Streaming over Millimeter-Wave: An Experimental Analysis

Achieving extremely high-quality and truly immersive interactive Virtual Reality (VR) is expected to require a wireless link to the cloud, providing multi-gigabit throughput and extremely low latency. A prime candidate for fulfilling these requirements is millimeter-wave (mmWave) communications, operating in the 30 to 300 GHz bands, rather than the traditional sub-6 GHz. Evaluations with first-generation mmWave Wi-Fi hardware, based on the IEEE 802.11ad standard, have so far largely remained limited to lower-layer metrics. In this work, we present the first experimental analysis of the capabilities of mmWave for streaming VR content, using a novel testbed capable of repeatably creating blockage through mobility. Using this testbed, we show that (a) motion may briefly interrupt transmission, (b) a broken line of sight may degrade throughput unpredictably, and (c) TCP-based streaming frameworks need careful tuning to behave well over mmWave.

cs.NI

Toward Interactive Multi-User Extended Reality Using Millimeter-Wave Networking

Extended Reality (XR) enables a plethora of novel interactive shared experiences. Ideally, users are allowed to roam around freely, while audiovisual content is delivered wirelessly to their Head-Mounted Displays (HMDs). Therefore, truly immersive experiences will require massive amounts of data, in the range of tens of gigabits per second, to be delivered reliably at extremely low latencies. We identify Millimeter-Wave (mmWave) communications, at frequencies between 24 and 300 GHz, as a key enabler for such experiences. In this article, we show how the mmWave state of the art does not yet achieve sufficient performance, and identify several key active research directions expected to eventually pave the way for extremely-high-quality mmWave-enabled interactive multi-user XR.

cs.NI