arXiv subjects

Hannah Varner

Publications and source records attributed to Hannah Varner.

3 recordsLinked to original sources

arXiv2024

Cylindrical Cavity Expansion: A Novel Method for Characterizing the Mechanical Properties of Soft Materials

The low elastic modulus of soft materials, combined with geometric nonlinearity and rate dependence, presents significant challenges in the characterization of their mechanical response. We introduce a novel method for measuring the mechanical properties of soft materials under large deformations via cylindrical cavity expansion. In this method, a cylindrical cavity is fabricated in the material and expanded by volume-controlled injection of an incompressible fluid with simultaneous measurement of the applied pressure at the cavity wall. The relationship between applied pressure and deformation at the cavity wall is then employed to characterize the nonlinear mechanical properties. We demonstrate the feasibility of the proposed method and validate it by measuring the mechanical properties of synthetic polydimethylsiloxane (PDMS) and comparing with reported values in the literature. Results indicate that the cylindrical cavitation method effectively captures the response of PDMS over a wide range of stiffness (shear modulus ranging from 5 kPa to 300 kPa) and exhibit high repeatability. The proposed method overcomes limitations in characterization of ultra-soft materials using traditional testing methods, such as challenges with fabrication and clamping in unaxial tension testing and friction and adhesion effects in compression and indentation testing, thus enabling accurate and precise characterization. It also offers improved accuracy and repeatability over other needle induced cavity expansion methods due to precise control over the initial cavity dimension and shape at the cost of increased invasiveness of testing.

cond-mat.mtrl-sci↗

arXiv2024

Explaining the spread in measurement of PDMS elastic properties: influence of test method and curing protocol

Accuracy in the measurement of mechanical properties is essential for precision engineering and for the interrogation of composition-property relationships. Conventional methods of mechanical testing, such as uniaxial tension, compression, and nanoindentation, provide highly repeatable and reliable results for stiff materials, for which they were originally developed. However, when applied to the characterization of soft and biological materials, the same cannot be said, and the spread of reported properties of similar materials is vast. Polydimethylsiloxane (PDMS), commonly obtained from Dow as SYLGARD 184, is a ubiquitous such material, which has been integral to the rapid development of biocompatible microfluidic devices and flexible electronics in recent decades. However, reported shear moduli of this material range over 2 orders of magnitude for similar chemical compositions. Taking advantage of the increased mechanical scrutiny afforded to SYLGARD 184 in recent years, we combine both published and new experimental data obtained using 9 mechanical test methods. A statistical analysis then elucidates the significant bias induced by the test method itself, and distinguishes this bias from the influence of curing protocols on the mechanical properties. The goal of this work is thus two-fold: (i) it provides a quantitative understanding of the different factors that influence reported properties of this particular material, and (ii) it serves as a cautionary tale. As researchers in the field of mechanics strive to quantify the properties of increasingly complex soft and biological materials, converging on a standardized measurement of PDMS is a necessary first step.

cond-mat.soft↗

arXiv2022

Periodic necking of misfit hyperelastic filaments embedded in a soft matrix

The necking instability is a precursor to tensile failure and rupture of materials. A quasistatically loaded free-standing uniaxial specimen typically exhibits necking at a single location, corresponding to a long wavelength bifurcation mode. If confined to a substrate or embedded in a matrix, the same filament can exhibit periodic necking thus creating segments of finite length. While periodic instabilities have been extensively studied in ductile metal filaments and thin sheets, less is known about necking in hyperelastic materials. There is a renewed interest in the role of necking in novel materials to advance fabrication processes and to explain fragmentation phenomena observed in 3D printed active biological matter. In both cases materials are not well described by existing frameworks that employ J2 plasticity, and existing studies ignore the role of misfit stretches that may emerge in these systems through chemical or biological contraction. To address these limitations, we first experimentally demonstrate the role of the matrix on the necking and fragmentation of a compliant embedded filament. Using a strain softening generalized hyperelastic model, our analytical bifurcation analysis explains the experimental observations and agrees with numerical predictions. The analysis reveals 3 distinct bifurcation modes: a long wavelength necking, recovering the Considere criterion; a periodic necking observed in our experiments; and a short wavelength mode characterized by localization along the center cord of the filament and independent of the film-to-matrix stiffness ratio. We find that the softening coefficient and the filament misfit stretch can significantly influence the stability threshold and observed wavelength, respectively. Our results can guide the design and fabrication of composite materials and explain the fragmentation processes observed in active biological materials.

cond-mat.soft↗