arXiv subjects

Hannah Tomio

Publications and source records attributed to Hannah Tomio.

3 recordsLinked to original sources

arXiv2026

Development of a Photonically Generated Frequency Reference for Space VLBI

Space-based Very Long Baseline Interferometry (VLBI) can improve both the angular and temporal resolution of images over terrestrial VLBI techniques. Future space VLBI (sVLBI) missions are targeting higher observation frequencies than modern, terrestrial VLBI, and therefore these missions will require higher stability frequency references than standard hydrogen masers. While existing frequency references for space-based applications have concentrated on long-term stability, in this effort, we present a frequency reference with high short-term stability intended for sVLBI missions. This reference leverages developments in cavity-stabilized lasers from the Laser Interferometer Space Antenna (LISA) mission and commercial efforts towards a robust, space-qualifiable optical frequency comb. We describe the implementation and experimental results of this system with a path to spaceflight, which demonstrates an Allan deviation of $3.26 \times 10^{-14}$ at 1 second, $6.00 \times 10^{-15}$ at 10 seconds, and $6.73 \times 10^{-15}$ at 30 seconds for the 100 MHz frequency reference signal, and show that this performance meets the needs of future sVLBI missions.

astro-ph.IM↗

arXiv2026

Alternative approach to time-delay interferometry with optical frequency comb

Spaceborne gravitational wave observatories, exemplified by the Laser Interferometer Space Antenna (LISA) mission, are designed to remove laser noise and clock noise from interferometric phase measurements in postprocessing. The planned observatories will utilize electro-optic modulators (EOMs) to encode the onboard clock timing onto the beam phase. Recent research has demonstrated the advantage of introducing an optical frequency comb (OFC) in the metrology system with the modified framework of time-delay interferometry (TDI): the removal of the EOM and the simultaneous suppression of the stochastic jitter of the laser and the clock in the observation band. In this paper, we explore an alternative approach with the OFC-based metrology system. We report that after proper treatment, it is possible to use the measured carrier-carrier heterodyne frequencies to monitor the time derivative of the pseudoranges, which represent the physical light travel time and the clock difference. This approach does not require changing the existing TDI framework, as previous OFC based efforts did. Furthermore, this approach naturally captures not only stochastic jitter but also clock offsets and slow drifts. We also present the experimental demonstration of our scheme using two separate systems to model two spacecraft. Using this novel approach, we synchronize the two independent phase measurement systems with an accuracy better than 0.47 ns, while the stochastic jitter in the observation band is suppressed down to the setup sensitivity around the LISA performance levels at 15 pm/sqrt(Hz).

astro-ph.IM↗

arXiv2024

Ultra-low noise laser and optical frequency comb-based timing system for the Black Hole Explorer (BHEX) mission

In this effort, we demonstrate the performance of a highly stable time reference for the proposed Black Hole Explorer (BHEX) mission, a space-based extension to the Event Horizon Telescope (EHT) Very Long Baseline Interferometry (VLBI) project. This precision timing system is based on the use of a space-qualified, ultra-low noise laser developed as part of the Laser Interferometer Space Antenna (LISA) mission as the timing reference, and an optical frequency comb to transfer the stability of this laser to the microwave regime for instrumentation use. We describe the implementation of this system and experimental setup to characterize the stability performance. We present the results of this experiment that demonstrate the performance of this system meets requirements for the BHEX mission.

astro-ph.IM↗