arXiv subjects

Han Zhang

Publications and source records attributed to Han Zhang.

At least 181 records · Page 10Linked to original sources

arXiv2025

Performance Analysis of Pinching-Antenna-Enabled Internet of Things Systems

The pinching-antenna systems (PASS), which activate small dielectric particles along a dielectric waveguide, has recently emerged as a promising paradigm for flexible antenna deployment in next-generation wireless communication networks. While most existing studies assume rectangular indoor layouts with full coverage waveguide, practical deployments may involve geometric constraints, partial coverage, and non-negligible waveguide attenuation. This paper presents the first analytical investigation of PASS in a circular indoor environment, encompassing both full coverage and partial coverage waveguide configurations with/without propagation loss. A unified geometric-propagation framework is developed that jointly captures pinching-antenna placement, Internet of Things (IoT) device location distribution, and waveguide attenuation. Closed-form expressions for the outage probability and average achievable rate are derived for four scenarios, with accuracy validated via extensive Monte-Carlo simulations. The analysis reveals that, under the partial coverage waveguide scenario with propagation loss, the system performance demonstrates a non-monotonic trend with respect to the waveguide length, and the optimal length decreases as the attenuation coefficient increases. Numerical results further quantify the interplay between deployment strategy, waveguide propagation loss, and coverage geometry, offering practical guidelines for performance-oriented PASS design.

eess.SY↗

arXiv2025

On the Performance Analysis of Pinching-Antenna-Enabled SWIPT Systems

In this paper, we studies the performance of a novel simultaneous wireless information and power transfer (SWIPT) system enabled by a flexible pinching-antenna. To support flexible deployment and optimize energy-rate performance, we propose three practical pinching antenna placement-schemes: the edge deployment scheme (EDS), the center deployment scheme (CDS), and the diagonal deployment scheme (DDS). Moreover, a hybrid time-switching (TS) and power-splitting (PS) protocol is introduced, allowing dynamic adjustment between energy harvesting and information decoding. Under each deployment strategy and the transmission protocol, closed-form expressions for the average harvested energy and average achievable rate of a randomly located user equipment (UE) are derived based on the optimal positioning of the pinching-antenna. Numerical simulations confirm the accuracy of the theoretical analysis and illustrate the trade-off between rate and energy harvesting under different schemes.

eess.SY↗

arXiv2025

Quantum-Enhanced Multi-Task Learning with Learnable Weighting for Pharmacokinetic and Toxicity Prediction

Prediction for ADMET (Absorption, Distribution, Metabolism, Excretion, and Toxicity) plays a crucial role in drug discovery and development, accelerating the screening and optimization of new drugs. Existing methods primarily rely on single-task learning (STL), which often fails to fully exploit the complementarities between tasks. Besides, it requires more computational resources while training and inference of each task independently. To address these issues, we propose a new unified Quantum-enhanced and task-Weighted Multi-Task Learning (QW-MTL) framework, specifically designed for ADMET classification tasks. Built upon the Chemprop-RDKit backbone, QW-MTL adopts quantum chemical descriptors to enrich molecular representations with additional information about the electronic structure and interactions. Meanwhile, it introduces a novel exponential task weighting scheme that combines dataset-scale priors with learnable parameters to achieve dynamic loss balancing across tasks. To the best of our knowledge, this is the first work to systematically conduct joint multi-task training across all 13 Therapeutics Data Commons (TDC) classification benchmarks, using leaderboard-style data splits to ensure a standardized and realistic evaluation setting. Extensive experimental results show that QW-MTL significantly outperforms single-task baselines on 12 out of 13 tasks, achieving high predictive performance with minimal model complexity and fast inference, demonstrating the effectiveness and efficiency of multi-task molecular learning enhanced by quantum-informed features and adaptive task weighting.

cs.LG↗

arXiv2025

Discrete Noise Inversion for Next-scale Autoregressive Text-based Image Editing

Visual autoregressive models (VAR) have recently emerged as a promising class of generative models, achieving performance comparable to diffusion models in text-to-image generation tasks. While conditional generation has been widely explored, the ability to perform prompt-guided image editing without additional training is equally critical, as it supports numerous practical real-world applications. This paper investigates the text-to-image editing capabilities of VAR by introducing Visual AutoRegressive Inverse Noise (VARIN), the first noise inversion-based editing technique designed explicitly for VAR models. VARIN leverages a novel pseudo-inverse function for argmax sampling, named Location-aware Argmax Inversion (LAI), to generate inverse Gumbel noises. These inverse noises enable precise reconstruction of the source image and facilitate targeted, controllable edits aligned with textual prompts. Extensive experiments demonstrate that VARIN effectively modifies source images according to specified prompts while significantly preserving the original background and structural details, thus validating its efficacy as a practical editing approach.

cs.CV↗

arXiv2025

Step-Audio 2 Technical Report

This paper presents Step-Audio 2, an end-to-end multi-modal large language model designed for industry-strength audio understanding and speech conversation. By integrating a latent audio encoder and reasoning-centric reinforcement learning (RL), Step-Audio 2 achieves promising performance in automatic speech recognition (ASR) and audio understanding. To facilitate genuine end-to-end speech conversation, Step-Audio 2 incorporates the generation of discrete audio tokens into language modeling, significantly enhancing its responsiveness to paralinguistic information such as speaking styles and emotions. To effectively leverage the rich textual and acoustic knowledge in real-world data, Step-Audio 2 integrates retrieval-augmented generation (RAG) and is able to call external tools such as web search to mitigate hallucination and audio search to switch timbres. Trained on millions of hours of speech and audio data, Step-Audio 2 delivers intelligence and expressiveness across diverse conversational scenarios. Evaluation results demonstrate that Step-Audio 2 achieves state-of-the-art performance on various audio understanding and conversational benchmarks compared to other open-source and commercial solutions. Please visit https://github.com/stepfun-ai/Step-Audio2 for more information.

cs.CL↗

arXiv2025

LabelGS: Label-Aware 3D Gaussian Splatting for 3D Scene Segmentation

3D Gaussian Splatting (3DGS) has emerged as a novel explicit representation for 3D scenes, offering both high-fidelity reconstruction and efficient rendering. However, 3DGS lacks 3D segmentation ability, which limits its applicability in tasks that require scene understanding. The identification and isolating of specific object components is crucial. To address this limitation, we propose Label-aware 3D Gaussian Splatting (LabelGS), a method that augments the Gaussian representation with object label.LabelGS introduces cross-view consistent semantic masks for 3D Gaussians and employs a novel Occlusion Analysis Model to avoid overfitting occlusion during optimization, Main Gaussian Labeling model to lift 2D semantic prior to 3D Gaussian and Gaussian Projection Filter to avoid Gaussian label conflict. Our approach achieves effective decoupling of Gaussian representations and refines the 3DGS optimization process through a random region sampling strategy, significantly improving efficiency. Extensive experiments demonstrate that LabelGS outperforms previous state-of-the-art methods, including Feature-3DGS, in the 3D scene segmentation task. Notably, LabelGS achieves a remarkable 22X speedup in training compared to Feature-3DGS, at a resolution of 1440X1080. Our code will be at https://github.com/garrisonz/LabelGS.

cs.CV↗

arXiv2025

The 9th AI City Challenge

The ninth AI City Challenge continues to advance real-world applications of computer vision and AI in transportation, industrial automation, and public safety. The 2025 edition featured four tracks and saw a 17% increase in participation, with 245 teams from 15 countries registered on the evaluation server. Public release of challenge datasets led to over 30,000 downloads to date. Track 1 focused on multi-class 3D multi-camera tracking, involving people, humanoids, autonomous mobile robots, and forklifts, using detailed calibration and 3D bounding box annotations. Track 2 tackled video question answering in traffic safety, with multi-camera incident understanding enriched by 3D gaze labels. Track 3 addressed fine-grained spatial reasoning in dynamic warehouse environments, requiring AI systems to interpret RGB-D inputs and answer spatial questions that combine perception, geometry, and language. Both Track 1 and Track 3 datasets were generated in NVIDIA Omniverse. Track 4 emphasized efficient road object detection from fisheye cameras, supporting lightweight, real-time deployment on edge devices. The evaluation framework enforced submission limits and used a partially held-out test set to ensure fair benchmarking. Final rankings were revealed after the competition concluded, fostering reproducibility and mitigating overfitting. Several teams achieved top-tier results, setting new benchmarks in multiple tasks.

cs.CV↗

arXiv2025

Synthesize, Retrieve, and Propagate: A Unified Predictive Modeling Framework for Relational Databases

Relational databases (RDBs) have become the industry standard for storing massive and heterogeneous data. However, despite the widespread use of RDBs across various fields, the inherent structure of relational databases hinders their ability to benefit from flourishing deep learning methods. Previous research has primarily focused on exploiting the unary dependency among multiple tables in a relational database using the primary key - foreign key relationships, either joining multiple tables into a single table or constructing a graph among them, which leaves the implicit composite relations among different tables and a substantial potential of improvement for predictive modeling unexplored. In this paper, we propose SRP, a unified predictive modeling framework that synthesizes features using the unary dependency, retrieves related information to capture the composite dependency, and propagates messages across a constructed graph to learn adjacent patterns for prediction on relation databases. By introducing a new retrieval mechanism into RDB, SRP is designed to fully capture both the unary and the composite dependencies within a relational database, thereby enhancing the receptive field of tabular data prediction. In addition, we conduct a comprehensive analysis on the components of SRP, offering a nuanced understanding of model behaviors and practical guidelines for future applications. Extensive experiments on five real-world datasets demonstrate the effectiveness of SRP and its potential applicability in industrial scenarios. The code is released at https://github.com/NingLi670/SRP.

cs.DB↗

arXiv2025

A 4D Radar Camera Extrinsic Calibration Tool Based on 3D Uncertainty Perspective N Points

4D imaging radar is a type of low-cost millimeter-wave radar(costing merely 10-20$\%$ of lidar systems) capable of providing range, azimuth, elevation, and Doppler velocity information. Accurate extrinsic calibration between millimeter-wave radar and camera systems is critical for robust multimodal perception in robotics, yet remains challenging due to inherent sensor noise characteristics and complex error propagation. This paper presents a systematic calibration framework to address critical challenges through a spatial 3d uncertainty-aware PnP algorithm (3DUPnP) that explicitly models spherical coordinate noise propagation in radar measurements, then compensating for non-zero error expectations during coordinate transformations. Finally, experimental validation demonstrates significant performance improvements over state-of-the-art CPnP baseline, including improved consistency in simulations and enhanced precision in physical experiments. This study provides a robust calibration solution for robotic systems equipped with millimeter-wave radar and cameras, tailored specifically for autonomous driving and robotic perception applications.

cs.RO↗

arXiv2025

Step-3 is Large yet Affordable: Model-system Co-design for Cost-effective Decoding

Large language models (LLMs) face low hardware efficiency during decoding, especially for long-context reasoning tasks. This paper introduces Step-3, a 321B-parameter VLM with hardware-aware model-system co-design optimized for minimizing decoding costs. Step-3 innovates in two key dimensions: (1) A novel Multi-Matrix Factorization Attention (MFA) mechanism that significantly reduces both KV cache size and computation while maintaining high attention expressiveness, and (2) Attention-FFN Disaggregation (AFD), a distributed inference system that decouples attention and Feed-Forward Network (FFN) layers into specialized subsystems. This co-design achieves unprecedented cost efficiency: Step-3 significantly reduces theoretical decoding costs compared with models like DeepSeek-V3 and Qwen3 MoE 235B, with the gains widening at longer context. Step-3 achieves low cost while activating 38B parameters per token (more than DeepSeek-V3 and Qwen3 MoE 235B), demonstrating that hardware-aligned attention arithmetic intensity, MoE sparsity, and AFD are critical to cost-effectiveness. We perform a head-to-head comparison with DeepSeek-V3 in its favorable scenarios. Our implementation on Hopper GPUs achieves a decoding throughput of up to 4,039 tokens per second per GPU under 50ms TPOT SLA (4K context, FP8, no MTP). It is higher than DeepSeek-V3's 2,324 in the same setup and sets a new Pareto frontier for LLM decoding.

cs.LG↗

arXiv2025

Privacy-Preserving Operating Room Workflow Analysis using Digital Twins

The operating room (OR) is a complex environment where optimizing workflows is critical to reduce costs and improve patient outcomes. While computer vision approaches for automatic recognition of perioperative events can identify bottlenecks for OR optimization, privacy concerns limit the use of OR videos for automated event detection. We propose a two-stage pipeline for privacy-preserving OR video analysis and event detection. First, we leverage vision foundation models for depth estimation and semantic segmentation to generate de-identified Digital Twins (DT) of the OR from conventional RGB videos. Second, we employ the SafeOR model, a fused two-stream approach that processes segmentation masks and depth maps for OR event detection. Evaluation on an internal dataset of 38 simulated surgical trials with five event classes shows that our DT-based approach achieves performance on par with -- and sometimes better than -- raw RGB video-based models for OR event detection. Digital Twins enable privacy-preserving OR workflow analysis, facilitating the sharing of de-identified data across institutions and potentially enhancing model generalizability by mitigating domain-specific appearance differences.

cs.CV↗

arXiv2025

Smooth minimal surfaces of general type with $p_g=0, K^2=7$ and involutions

Lee and the second named author studied involutions on smooth minimal surfaces $S$ of general type with $p_g(S)=0$ and $K_S^2=7$. They gave the possibilities of the birational models $W$ of the quotients and the branch divisors $B_0$ induced by involutions $σ$ on the surfaces $S$. In this paper we improve and refine the results of Lee and the second named author. We exclude the case of the Kodaira dimension $κ(W)=1$ when the number $k$ of isolated fixed points of an involution $σ$ on $S$ is nine. The possibilities of branch divisors $B_0$ are reduced for the case $k=9$, and are newly given for the case $k=11$. Moreover, we show that if the branch divisor $B_0$ has three irreducible components, then $S$ is an Inoue surface.

math.AG↗

arXiv2025

FluoroSAM: A Language-promptable Foundation Model for Flexible X-ray Image Segmentation

Language promptable X-ray image segmentation would enable greater flexibility for human-in-the-loop workflows in diagnostic and interventional precision medicine. Prior efforts have contributed task-specific models capable of solving problems within a narrow scope, but expanding to broader use requires additional data, annotations, and training time. Recently, language-aligned foundation models (LFMs) -- machine learning models trained on large amounts of highly variable image and text data thus enabling broad applicability -- have emerged as promising tools for automated image analysis. Existing foundation models for medical image analysis focus on scenarios and modalities where large, richly annotated datasets are available. However, the X-ray imaging modality features highly variable image appearance and applications, from diagnostic chest X-rays to interventional fluoroscopy, with varying availability of data. To pave the way toward an LFM for comprehensive and language-aligned analysis of arbitrary medical X-ray images, we introduce FluoroSAM, a language-promptable variant of the Segment Anything Model, trained from scratch on 3M synthetic X-ray images from a wide variety of human anatomies, imaging geometries, and viewing angles. These include pseudo-ground truth masks for 128 organ types and 464 tools with associated text descriptions. FluoroSAM is capable of segmenting myriad anatomical structures and tools based on natural language prompts, thanks to the novel incorporation of vector quantization (VQ) of text embeddings in the training process. We demonstrate FluoroSAM's performance quantitatively on real X-ray images and showcase on several applications how FluoroSAM is a key enabler for rich human-machine interaction in the X-ray image acquisition and analysis context. Code is available at https://github.com/arcadelab/fluorosam.

cs.CV↗

arXiv2025

Semantic-enhanced Modality-asymmetric Retrieval for Online E-commerce Search

Semantic retrieval, which retrieves semantically matched items given a textual query, has been an essential component to enhance system effectiveness in e-commerce search. In this paper, we study the multimodal retrieval problem, where the visual information (e.g, image) of item is leveraged as supplementary of textual information to enrich item representation and further improve retrieval performance. Though learning from cross-modality data has been studied extensively in tasks such as visual question answering or media summarization, multimodal retrieval remains a non-trivial and unsolved problem especially in the asymmetric scenario where the query is unimodal while the item is multimodal. In this paper, we propose a novel model named SMAR, which stands for Semantic-enhanced Modality-Asymmetric Retrieval, to tackle the problem of modality fusion and alignment in this kind of asymmetric scenario. Extensive experimental results on an industrial dataset show that the proposed model outperforms baseline models significantly in retrieval accuracy. We have open sourced our industrial dataset for the sake of reproducibility and future research works.

cs.IR↗

arXiv2025

Probing the electromagnetic dipole moment of the $τ$ lepton in the $e^+e^- \to γ^*/Z \to τ^+ τ^-$ reaction

High-precision measurements of the lepton's electromagnetic dipole moments provide a powerful probe for testing the Standard Model. A non-zero value of the $τ$ lepton's electric(weak) dipole moment ($d_τ^γ$, $d_τ^{Z}$) would serve as a smoking gun of the new physics. On the one hand, current and future high energy colliders offer an ideal environment for such measurements. On the other hand, it is essential to investigate the optimal measurement method for extracting not only $d_τ^γ$ and $d_τ^{Z}$, but also the anomalous magnetic dipole moment ($a_τ$). In this work, we analyze the precision of observables, particularly optimal observables, for determining these physics quantities through the process $e^+e^- \to γ^*/Z \to τ^+ τ^-$ with $τ$ leptons undergoing (semi-)leptonic and hadronic decays at the centre-of-mass energies at the Z pole mass and significantly below $m_Z$. By considering the full kinematic information of the decay products, we find that the sensitivities to Im$d_τ$ and Re$d_τ$ can reach $10^{-21}$ $ecm$ at CEPC $\sqrt s = m_Z$, compared to $10^{-20}$ $ecm$ at Belle-II $Υ(4S)$ resonance and $10^{-17}$ $ecm$ at BEPCII $ψ(2S)$ resonance. For $a_τ$, we find that Im$a_τ$ and Re$a_τ$ with a precision of $10^{-5}$ at Belle-II $\sqrt s=10.58$ GeV can be attained.

hep-ph↗

arXiv2025

Instability in Diffusion ODEs: An Explanation for Inaccurate Image Reconstruction

Diffusion reconstruction plays a critical role in various applications such as image editing, restoration, and style transfer. In theory, the reconstruction should be simple - it just inverts and regenerates images by numerically solving the Probability Flow-Ordinary Differential Equation (PF-ODE). Yet in practice, noticeable reconstruction errors have been observed, which cannot be well explained by numerical errors. In this work, we identify a deeper intrinsic property in the PF-ODE generation process, the instability, that can further amplify the reconstruction errors. The root of this instability lies in the sparsity inherent in the generation distribution, which means that the probability is concentrated on scattered and small regions while the vast majority remains almost empty. To demonstrate the existence of instability and its amplification on reconstruction error, we conduct experiments on both toy numerical examples and popular open-sourced diffusion models. Furthermore, based on the characteristics of image data, we theoretically prove that the instability's probability converges to one as the data dimensionality increases. Our findings highlight the inherent challenges in diffusion-based reconstruction and can offer insights for future improvements.

cs.LG↗

arXiv2025

Foundation Model-Aided Deep Reinforcement Learning for RIS-Assisted Wireless Communication

Reconfigurable intelligent surfaces (RIS) have emerged as a promising technology for enhancing wireless communication by dynamically controlling signal propagation in the environment. However, their efficient deployment relies on accurate channel state information (CSI), which leads to high channel estimation overhead due to their passive nature and the large number of reflective elements. In this work, we solve this challenge by proposing a novel framework that leverages a pre-trained open-source foundation model (FM) named large wireless model (LWM) to process wireless channels and generate versatile and contextualized channel embeddings. These embeddings are then used for the joint optimization of the BS beamforming and RIS configurations. To be more specific, for joint optimization, we design a deep reinforcement learning (DRL) model to automatically select the BS beamforming vector and RIS phase-shift matrix, aiming to maximize the spectral efficiency (SE). This work shows that a pre-trained FM for radio signal understanding can be fine-tuned and integrated with DRL for effective decision-making in wireless networks. It highlights the potential of modality-specific FMs in real-world network optimization. According to the simulation results, the proposed method outperforms the DRL-based approach and beam sweeping-based approach, achieving 9.89% and 43.66% higher SE, respectively.

eess.SP↗

arXiv2025

Conditional Denoising Diffusion for ISAC Enhanced Channel Estimation in Cell-Free 6G

Cell-free Integrated Sensing and Communication (ISAC) aims to revolutionize 6th Generation (6G) networks. By combining distributed access points with ISAC capabilities, it boosts spectral efficiency, situational awareness, and communication reliability. Channel estimation is a critical step in cell-free ISAC systems to ensure reliable communication, but its performance is usually limited by challenges such as pilot contamination and noisy channel estimates. This paper presents a novel framework leveraging sensing information as a key input within a Conditional Denoising Diffusion Model (CDDM). In this framework, we integrate CDDM with a Multimodal Transformer (MMT) to enhance channel estimation in ISAC-enabled cell-free systems. The MMT encoder effectively captures inter-modal relationships between sensing and location data, enabling the CDDM to iteratively denoise and refine channel estimates. Simulation results demonstrate that the proposed approach achieves significant performance gains. As compared with Least Squares (LS) and Minimum Mean Squared Error (MMSE) estimators, the proposed model achieves normalized mean squared error (NMSE) improvements of 8 dB and 9 dB, respectively. Moreover, we achieve a 27.8% NMSE improvement compared to the traditional denoising diffusion model (TDDM), which does not incorporate sensing channel information. Additionally, the model exhibits higher robustness against pilot contamination and maintains high accuracy under challenging conditions, such as low signal-to-noise ratios (SNRs). According to the simulation results, the model performs well for users near sensing targets by leveraging the correlation between sensing and communication channels.

eess.SP↗