arXiv subjects

Hamid Kellay

Publications and source records attributed to Hamid Kellay.

16 recordsLinked to original sources

arXiv2026

Active colloidal rafts perform swimming strokes that propel their host droplets

Active particles confined in droplets can set their host droplet into motion. This phenomenon is usually attributed to direct hydrodynamic forcing by the enclosed particles. Here we reveal a different mechanism: we show that a self-propelled raft of active colloids confined in a thin oil droplet at the surface of water typically follows an off-centered orbit, thus periodically deforming the droplet's contact line in an anisotropic way. This non-reciprocal deformation acts as a swimming stroke and propels the droplet according to the principles of low-Reynolds-number swimming. The effect is absent for a single colloid and arises from the intrinsically many-body dynamics of the raft, which we capture with a dynamical model coupling viscous hydrodynamics and many-body active dynamics. Our results show how collective internal activity can be converted into locomotion through deformation of a soft confining boundary.

cond-mat.soft↗

arXiv2025

Active particle in a very thin interfacial droplet

A single light-driven Janus particle confined in a very thin oil droplet at an air--water interface displays intriguing dynamics. While laser activation induces rapid horizontal motion (1mm/s--1cm/s) by thermal Marangoni flow, the particle exhibits unexpected periodic circular motions or intermittent irregular motions. We show that the periodic trajectories are the result of a coupling between the self-propulsion of the particle and the spatiotemporal droplet thickness changes. We propose a simple model where the properties of the active particle trajectories are governed by capillary forces and torques due to the confinement of the particle in the thin droplet.

cond-mat.soft↗

arXiv2024

Roadmap for Animate Matter

Humanity has long sought inspiration from nature to innovate materials and devices. As science advances, nature-inspired materials are becoming part of our lives. Animate materials, characterized by their activity, adaptability, and autonomy, emulate properties of living systems. While only biological materials fully embody these principles, artificial versions are advancing rapidly, promising transformative impacts across various sectors. This roadmap presents authoritative perspectives on animate materials across different disciplines and scales, highlighting their interdisciplinary nature and potential applications in diverse fields including nanotechnology, robotics and the built environment. It underscores the need for concerted efforts to address shared challenges such as complexity management, scalability, evolvability, interdisciplinary collaboration, and ethical and environmental considerations. The framework defined by classifying materials based on their level of animacy can guide this emerging field encouraging cooperation and responsible development. By unravelling the mysteries of living matter and leveraging its principles, we can design materials and systems that will transform our world in a more sustainable manner.

cond-mat.mtrl-sci↗

arXiv2024

Air drag controls the runout of small laboratory landslides

Laboratory granular landslides are smaller-scale, simplified, yet well-controlled versions of larger and often tragic natural landslides. Using systematic experiments and scaling analysis, we quantify the influence of grain size, fall height, and landslide volume on runout distance. We also determine the minimum landslide size required to observe this scaling, which we find is set by a combination of air drag, grain size, and fall height.

physics.flu-dyn↗

arXiv2024

A granular scaling approach to landslide runout

A main objective in landslide research is to predict how far they will travel. Landslides are complex, and a complete understanding in principle requires accounting for numerous parameters. Here we engender a simplification by investigating the maximum landslide runout using granular laboratory experiments and a scaling analysis. We find that correctly accounting for the fall height and grain size distribution not only yields an improved correlation of normalized runout, but also quantitatively unites laboratory and field data. In particular, we find that the mobility of landslides increases with the square root of the fall height and with the skewness of the grain size distribution.

physics.flu-dyn↗

arXiv2022

The effect of tilt on turbulent thermal convection for a heated soap bubble

We use direct numerical simulation (DNS) to explore the effect of tilt on two-dimensional turbulent thermal convection on a half-soap bubble that is heated at its equator.In the DNS, the bubble is tilted by an angle $δ\in[0^{\circ},90^{\circ}]$, the Rayleigh number is varied between $Ra\in[3\times10^6, 3\times10^9]$, and the Prandlt number is fixed at $Pr=7$.The DNS reveals two qualitatively different flow regimes: the dynamic plume regime (DPR) and the stable plume regime (SPR).In the DPR, small dynamic plumes constantly emerge from random locations on the equator and dissipate on the bubble.In the SPR, the flow is dominated by a single large and stable plume rising from the lower edge of the bubble.The scaling behaviour of the Nusselt number $Nu$ and Reynolds number $Re$ are different in these two regimes,with $Nu\propto Ra^{0.3}$ for the DPR and $Nu\propto Ra^{0.24}$ for the SPR. Concerning $Re$, the scaling in the DPR lies between $Re\propto Ra^{0.48}$ and $Re\propto Ra^{0.53}$ depending on $Ra$ and $δ$,while in the SPR, the scaling lies between $Re\propto Ra^{0.44}$ and $Re\propto Ra^{0.45}$ depending on $δ$.The turbulent thermal and kinetic energy dissipation rates ($ε_{T^{\prime}}$ and $ε_{u^{\prime}}$, respectively) are also very different in the DPR and SPR.The probability density functions (PDF) of the normalized $\logε_{T^{\prime}}$ and $\logε_{u^{\prime}}$ are close to a Gaussian PDF for small fluctuations, but deviate considerably from a Gaussian at large fluctuations in the DPR.

physics.flu-dyn↗

arXiv2022

Universal aspects of droplet spreading dynamics in Newtonian and non-Newtonian Fluids

Droplet impacts are common in many applications such as coating, spraying, or printing; understanding how droplets spread after impact is thus of utmost importance. Such impacts may occur with different velocities on a variety of substrates. The fluids may also be non-Newtonian and thus possess different rheological properties. How the different properties such as surface roughness and wettability, droplet viscosity and rheology as well as interfacial properties affect the spreading dynamics of the droplets and the eventual drop size after impact are unresolved questions. Most recent work focuses on the maximum spreading diameter after impact and uses scaling laws to predict this. In this paper we show that a proper rescaling of the spreading dynamics with the maximum radius attained by the drop, and the impact velocity leads to a unique single and thus universal curve for the variation of diameter versus time. The validity of this universal functional shape is validated for different liquids with different rheological properties as well as substrates with different wettabilities. This universal function agrees with a recent model that proposes a closed set of differential equations for the spreading dynamics of droplets.

physics.flu-dyn↗

arXiv2021

Emulsion Destabilization by Squeeze Flow

There is a large debate on the destabilization mechanism of emulsions. We present a simple technique using mechanical compression to destabilize oil-in-water emulsions. Upon compression of the emulsion, the continuous aqueous phase is squeezed out, while the dispersed oil phase progressively deforms from circular to honeycomb-like shapes. The films that separate the oil droplets are observed to thin and break at a critical oil/water ratio, leading to coalescence events. Electrostatic interactions and local droplet rearrangements do not determine film rupture. Instead, the destabilization occurs like an avalanche propagating through the system, starting at areas where the film thickness is smallest.

cond-mat.soft↗

arXiv2021

Asymptotic turbulent friction in 2D rough-walled flows

The friction f is the property of wall-bounded flows that sets the pumping cost of a pipeline, the draining capacity of a river, and other variables of practical relevance. For highly turbulent rough-walled pipe flows, f depends solely on the roughness length scale r, and the f -- r relation may be expressed by the Strickler empirical scaling f $\propto$ r$^{\frac{1}{3}}$. Here, we show experimentally that for soap film flows that are the two-dimensional (2D) equivalent of highly turbulent rough-walled pipe flows, f $\propto$ r and the f -- r relation is not the same in 2D as in 3D. Our findings are beyond the purview of the standard theory of friction but consistent with a competing theory in which f is linked to the turbulent spectrum via the spectral exponent $α$: In 3D, $α$ = 5/3 and the theory yields f $\propto$ r$^{\frac{1}{3}}$; in 2D, $α$ = 3 and the theory yields f $\propto$ r.

physics.flu-dyn↗

arXiv2020

Near-field probe of thermal capillary fluctuations of a hemispherical bubble

We report measurements of resonant thermal capillary oscillations of a hemispherical liquid gas interface obtained using a half bubble deposited on a solid substrate. The thermal motion of the hemispherical interface is investigated using an atomic force microscope cantilever that probes the amplitude of vibrations of this interface versus frequency. The spectrum of such nanoscale thermal oscillations of the bubble surface presents several resonance peaks and reveals that the contact line of the hemispherical bubble is pinned on the substrate. The analysis of these peaks allows to measure the surface viscosity of the bubble interface. Minute amounts of impurities are responsible for altering the rheology of the pure water surface.

cond-mat.soft↗

arXiv2020

Classical Hydrodynamics for Analogue Spacetimes: Open Channel Flows and Thin Films

Here we review the way to build analogue spacetimes in open channel flows by looking at the flow phase diagram and the corresponding analogue experiments performed during the last years in the associated flow regimes. Thin films like the circular jump with different dispersive properties are discussed with the introduction of a brand new system for the next generation of analogue gravity experiments: flowing soap films with their capillary/elastic waves.

cond-mat.soft↗

arXiv2017

Visco-elastic drag forces and crossover from no-slip to slip boundary conditions for flow near air-water interfaces

The "free" water surface is generally prone to contamination with surface impurities be they surfactants, particles or other surface active agents. The presence of such impurities can modify flow boundary near such interfaces in a drastic manner. Here we show that vibrating a small sphere mounted on an AFM cantilever near a gas bubble immersed in water, is an excellent probe of surface contamination. Both viscous and elastic forces are exerted by an air-water interface on the vibrating sphere even when very low doses of contaminants are present. The viscous drag forces show a cross-over from no-slip to slip boundary conditions while the elastic forces show a nontrivial variation as the vibration frequency changes. We provide a simple model to rationalize these results and propose a simple way of evaluating the concentration of such surface impurities.

cond-mat.soft↗

arXiv2009

Macroscopic effects of the spectral structure in turbulent flows

Two aspects of turbulent flows have been the subject of extensive, split research efforts: macroscopic properties, such as the frictional drag experienced by a flow past a wall, and the turbulent spectrum. The turbulent spectrum may be said to represent the fabric of a turbulent state; in practice it is a power law of exponent α(the "spectral exponent") that gives the revolving velocity of a turbulent fluctuation (or "eddy") of size s as a function of s. The link, if any, between macroscopic properties and the turbulent spectrum remains missing. Might it be found by contrasting the frictional drag in flows with differing types of spectra? Here we perform unprecedented measurements of the frictional drag in soap-film flows, where the spectral exponent α= 3 and compare the results with the frictional drag in pipe flows, where the spectral exponent α= 5/3. For moderate values of the Reynolds number Re (a measure of the strength of the turbulence), we find that in soap-film flows the frictional drag scales as Re^{-1/2}, whereas in pipe flows the frictional drag scales as Re^{-1/4} . Each of these scalings may be predicted from the attendant value of αby using a new theory, in which the frictional drag is explicitly linked to the turbulent spectrum. Our work indicates that in turbulence, as in continuous phase transitions, macroscopic properties are governed by the spectral structure of the fluctuations.

physics.flu-dyn↗

arXiv2006

Where surface physics and fluid dynamics meet: rupture of an amphiphile layer by fluid flow

We investigate the fluctuating pattern created by a jet of fluid impingent upon an amphiphile-covered surface. This microscopically thin layer is initially covered with 50 $μ$m floating particles so that the layer can be visualized. A vertical jet of water located below the surface and directed upward drives a hole in this layer. The hole is particle-free and is surrounded by the particle-laden amphiphile region. The jet ruptures the amphiphile layer creating a particle-free region that is surrounded by the particle-covered surface. The aim of the experiment is to understand the (fluctuating) shape of the ramified interface between the particle-laden and particle-free regions.

nlin.CD↗

arXiv2006

Reynolds number dependence of drag reduction by rod-like polymers

We present experimental and theoretical results addressing the Reynolds number (Re) dependence of drag reduction by sufficiently large concentrations of rod-like polymers in turbulent wall-bounded flows. It is shown that when Re is small the drag is {\em enhanced}. On the other hand when Re increases the drag is reduced and eventually the Maximal Drag Reduction (MDR) asymptote is attained. The theory is shown to be in excellent agreement with experiments, rationalizing and explaining all the universal and the non-universal aspects of drag reduction by rod-like polymers.

nlin.CD↗

arXiv2001

Fluctuation and Dissipation in Liquid Crystal Electroconvection

In this experiment a steady state current is maintained through a liquid crystal thin film. When the applied voltage is increased through a threshold, a phase transition is observed into a convective state characterized by the chaotic motion of rolls. Above the threshold, an increase in power consumption is observed that is manifested by an increase in the mean conductivity. A sharp increase in the ratio of the power fluctuations to the mean power dissipated is observed above the transition. This ratio is compared to the predictions of the fluctuation theorem of Gallavotti and Cohen using an effective temperature associated with the rolls' chaotic motion.

nlin.CD↗