arXiv Science⌕ Search

arXiv subjects

Haitao Li

Publications and source records attributed to Haitao Li.

At least 73 records · Page 4Linked to original sources

Deep Research: A Systematic Survey

Large language models (LLMs) have rapidly evolved from text generators into powerful problem solvers. Yet, many open tasks demand critical thinking, multi-source, and verifiable outputs, which are beyond single-shot prompting or standard retrieval-augmented generation. Recently, numerous studies have explored Deep Research (DR), which aims to combine the reasoning capabilities of LLMs with external tools, such as search engines, thereby empowering LLMs to act as research agents capable of completing complex, open-ended tasks. This survey presents a comprehensive and systematic overview of deep research systems, including a clear roadmap, foundational components, practical implementation techniques, important challenges, and future directions. Specifically, our main contributions are as follows: (i) we formalize a three-stage roadmap and distinguish deep research from related paradigms; (ii) we introduce four key components: query planning, information acquisition, memory management, and answer generation, each paired with fine-grained sub-taxonomies; (iii) we summarize optimization techniques, including prompting, supervised fine-tuning, and agentic reinforcement learning; and (iv) we consolidate evaluation criteria and open challenges, aiming to guide and facilitate future development. As the field of deep research continues to evolve rapidly, we are committed to continuously updating this survey to reflect the latest progress in this area.

cs.CL↗

anyECG-chat: A Generalist ECG-MLLM for Flexible ECG Input and Multi-Task Understanding

The advent of multimodal large language models (MLLMs) has sparked interest in their application to electrocardiogram (ECG) analysis. However, existing ECG-focused MLLMs primarily focus on report generation tasks, often limited to single 12-lead, short-duration (10s) ECG inputs, thereby underutilizing the potential of MLLMs. To this end, we aim to develop a MLLM for ECG analysis that supports a broader range of tasks and more flexible ECG inputs. However, existing ECG-QA datasets are often monotonous. To address this gap, we first constructed the anyECG dataset, which encompasses a wide variety of tasks, including report generation, abnormal waveform localization, and open-ended question answering. In addition to standard hospital ECGs, we introduced long-duration reduced-lead ECGs for home environments and multiple ECG comparison scenarios commonly encountered in clinical practice. Furthermore, we propose the anyECG-chat model, which supports dynamic-length ECG inputs and multiple ECG inputs. We trained the model using a three-stage curriculum training recipe with the anyECG dataset. A comprehensive evaluation was conducted, demonstrating that anyECG-chat is capable of supporting various practical application scenarios, including not only common report generation tasks but also abnormal waveform localization for long-duration reduced-lead ECGs in home environments and comprehensive comparative analysis of multiple ECGs. Our code and data are available at: https://github.com/CuCl-2/anyECG-chat.

cs.CL↗

Auto-PRE: An Automatic and Cost-Efficient Peer-Review Framework for Language Generation Evaluation

The rapid development of large language models (LLMs) has highlighted the need for efficient and reliable methods to evaluate their performance. Traditional evaluation methods often face challenges like high costs, limited task formats, dependence on human references, and systematic biases. To address these limitations, we propose Auto-PRE, an automatic LLM evaluation framework inspired by the peer review process. Unlike previous approaches that rely on human annotations, Auto-PRE automatically selects evaluator LLMs based on three core traits: consistency, pertinence, and self-confidence, which correspond to the instruction, content, and response stages, respectively, and collectively cover the entire evaluation process. Experiments on three representative tasks, including summarization, non-factoid QA, and dialogue generation, demonstrate that Auto-PRE achieves state-of-the-art performance while significantly reducing evaluation costs. Furthermore, the structured and scalable design of our automatic qualification exam framework provides valuable insights into automating the evaluation of LLMs-as-judges, paving the way for more advanced LLM-based evaluation frameworks.

cs.CL↗

SelfRACG: Enabling LLMs to Self-Express and Retrieve for Code Generation

Existing retrieval-augmented code generation (RACG) methods typically use an external retrieval module to fetch semantically similar code snippets used for generating subsequent fragments. However, even for consecutive code fragments, the content often diverges due to logical progression, resulting in a content gap. This gap undermines the performance of current RACG methods, as \textit{external} retrieval modules based on content matching fail to infer the specific information need of LLMs to generate the next code fragment. Therefore, we propose \textbf{SelfRACG}, a novel paradigm that enables large language models (LLMs) to \textbf{Self}-express their information needs to enhance \textbf{RACG}. Specifically, SelfRACG includes an information need expression module and a two-stage information need-guided training strategy, which encourages LLMs to express their information need. Extensive experiments demonstrate that SelfRACG can retrieve external knowledge that better aligns with the LLM's own information needs, resulting in superior generation performance compared to vanilla RACG.

cs.IR↗

JustEva: A Toolkit to Evaluate LLM Fairness in Legal Knowledge Inference

The integration of Large Language Models (LLMs) into legal practice raises pressing concerns about judicial fairness, particularly due to the nature of their "black-box" processes. This study introduces JustEva, a comprehensive, open-source evaluation toolkit designed to measure LLM fairness in legal tasks. JustEva features several advantages: (1) a structured label system covering 65 extra-legal factors; (2) three core fairness metrics - inconsistency, bias, and imbalanced inaccuracy; (3) robust statistical inference methods; and (4) informative visualizations. The toolkit supports two types of experiments, enabling a complete evaluation workflow: (1) generating structured outputs from LLMs using a provided dataset, and (2) conducting statistical analysis and inference on LLMs' outputs through regression and other statistical methods. Empirical application of JustEva reveals significant fairness deficiencies in current LLMs, highlighting the lack of fair and trustworthy LLM legal tools. JustEva offers a convenient tool and methodological foundation for evaluating and improving algorithmic fairness in the legal domain.

cs.AI↗

Chinese Court Simulation with LLM-Based Agent System

Mock trial has long served as an important platform for legal professional training and education. It not only helps students learn about realistic trial procedures, but also provides practical value for case analysis and judgment prediction. Traditional mock trials are difficult to access by the public because they rely on professional tutors and human participants. Fortunately, the rise of large language models (LLMs) provides new opportunities for creating more accessible and scalable court simulations. While promising, existing research mainly focuses on agent construction while ignoring the systematic design and evaluation of court simulations, which are actually more important for the credibility and usage of court simulation in practice. To this end, we present the first court simulation framework -- SimCourt -- based on the real-world procedure structure of Chinese courts. Our framework replicates all 5 core stages of a Chinese trial and incorporates 5 courtroom roles, faithfully following the procedural definitions in China. To simulate trial participants with different roles, we propose and craft legal agents equipped with memory, planning, and reflection abilities. Experiment on legal judgment prediction show that our framework can generate simulated trials that better guide the system to predict the imprisonment, probation, and fine of each case. Further annotations by human experts show that agents' responses under our simulation framework even outperformed judges and lawyers from the real trials in many scenarios. These further demonstrate the potential of LLM-based court simulation.

cs.CY↗

GLM-4.5: Agentic, Reasoning, and Coding (ARC) Foundation Models

We present GLM-4.5, an open-source Mixture-of-Experts (MoE) large language model with 355B total parameters and 32B activated parameters, featuring a hybrid reasoning method that supports both thinking and direct response modes. Through multi-stage training on 23T tokens and comprehensive post-training with expert model iteration and reinforcement learning, GLM-4.5 achieves strong performance across agentic, reasoning, and coding (ARC) tasks, scoring 70.1% on TAU-Bench, 91.0% on AIME 24, and 64.2% on SWE-bench Verified. With much fewer parameters than several competitors, GLM-4.5 ranks 3rd overall among all evaluated models and 2nd on agentic benchmarks. We release both GLM-4.5 (355B parameters) and a compact version, GLM-4.5-Air (106B parameters), to advance research in reasoning and agentic AI systems. Code, models, and more information are available at https://github.com/zai-org/GLM-4.5.

cs.CL↗

LLMs on Trial: Evaluating Judicial Fairness for Large Language Models

Large Language Models (LLMs) are increasingly used in high-stakes fields where their decisions impact rights and equity. However, LLMs' judicial fairness and implications for social justice remain underexplored. When LLMs act as judges, the ability to fairly resolve judicial issues is a prerequisite to ensure their trustworthiness. Based on theories of judicial fairness, we construct a comprehensive framework to measure LLM fairness, leading to a selection of 65 labels and 161 corresponding values. Applying this framework to the judicial system, we compile an extensive dataset, JudiFair, comprising 177,100 unique case facts. To achieve robust statistical inference, we develop three evaluation metrics, inconsistency, bias, and imbalanced inaccuracy, and introduce a method to assess the overall fairness of multiple LLMs across various labels. Through experiments with 16 LLMs, we uncover pervasive inconsistency, bias, and imbalanced inaccuracy across models, underscoring severe LLM judicial unfairness. Particularly, LLMs display notably more pronounced biases on demographic labels, with slightly less bias on substance labels compared to procedure ones. Interestingly, increased inconsistency correlates with reduced biases, but more accurate predictions exacerbate biases. While we find that adjusting the temperature parameter can influence LLM fairness, model size, release date, and country of origin do not exhibit significant effects on judicial fairness. Accordingly, we introduce a publicly available toolkit containing all datasets and code, designed to support future research in evaluating and improving LLM fairness.

cs.CL↗

Flavor Physics at the CEPC: a General Perspective

We discuss the landscape of flavor physics at the Circular Electron-Positron Collider (CEPC), based on the nominal luminosity outlined in its Technical Design Report. The CEPC is designed to operate in multiple modes to address a variety of tasks. At the $Z$ pole, the expected production of 4 Tera $Z$ bosons will provide unique and highly precise measurements of $Z$ boson couplings, while the substantial number of boosted heavy-flavored quarks and leptons produced in clean $Z$ decays will facilitate investigations into their flavor physics with unprecedented precision. We investigate the prospects of measuring various physics benchmarks and discuss their implications for particle theories and phenomenological models. Our studies indicate that, with its highlighted advantages and anticipated excellent detector performance, the CEPC can explore beauty and $τ$ physics in ways that are superior to or complementary with the Belle II and Large-Hadron-Collider-beauty experiments, potentially enabling the detection of new physics at energy scales of 10 TeV and above. This potential also extends to the observation of yet-to-be-discovered rare and exotic processes, as well as testing fundamental principles such as lepton flavor universality, lepton and baryon number conservation, etc., making the CEPC a vibrant platform for flavor physics research. The $WW$ threshold scan, Higgs-factory operation and top-pair productions of the CEPC further enhance its merits in this regard, especially for measuring the Cabibbo-Kobayashi-Maskawa matrix elements, and Flavor-Changing-Neutral-Current physics of Higgs boson and top quarks. We outline the requirements for detector performance and considerations for future development to achieve the anticipated scientific goals.

hep-ex↗

Lunar Orbital VLBI Experiment: motivation, scientific purposes and status

The Lunar Orbital VLBI Experiment (LOVEX) is a scientific component of the Chinese Lunar Exploration Project (CLEP) Chang'E-7. The spaceborne component of LOVEX is implemented onboard the relay satellite QueQiao-2, which was launched on 2024 March 20, and later placed into an elliptical selenocentric orbit. The LOVEX-specific payload consists of an X-band cryogenic receiver, a hydrogen maser frequency standard, and VLBI data formatting and acquisition electronics. Several components of the QueQiao-2 nominal onboard instrumentation, such as the 4.2-meter antenna, the data storage device, and the downlink communication system, contribute to the overall spaceborne VLBI instrumentation. This allows us to form a space radio telescope capable of co-observing with Earth-based radio telescopes in VLBI mode. In this space VLBI system, the length of the baseline extends up to approximately 380,000 km. This paper presents the LOVEX scientific objectives, architecture, instrumentation, pre-launch tests, in-flight verification and calibration, and the first in-flight detections of interferometric response (''fringes'') achieved through observations of the quasar AO 0235+164 and the Chang'E-6 orbital module, positioned at the Sun-Earth Lagrange point L2. These initial results demonstrate the successful performance of LOVEX, verifying its capability for both astronomical and spacecraft tracking observations at ultra-long VLBI baselines.

astro-ph.IM↗

Direct Observation of Strongly Tilted Dirac Points at General Positions in the Reciprocal Space

Type-II Dirac points (DPs), which occur at the intersection of strongly tilted and touching energy bands, exhibit many intriguing physical phenomena fundamentally different from the non-tilted type-I counterparts. Over the past decade, their discovery has spurred extensive research into electronic systems and other Bloch-wave systems, such as photonic and phononic crystals. However, current studies typically focus on type-II DPs along high-symmetry directions in the first Brillouin zone (FBZ) under mirror symmetry conditions, which are highly restrictive and limit further investigations and applications. To overcome the stringent constraint, here we identify and demonstrate the emergence of type-II DPs at general positions inside the FBZ without requiring the mirror symmetry. The type-II DPs, being accidental degeneracies, are experimentally realized on a metacrystal slab with H-shaped metallic patterns. Our findings indicate that even in the absence of mirror symmetry, type-II DPs can emerge at designated locations inside the FBZ by simply rotating the H-shaped patterns and adjusting geometrical and physical parameters. Furthermore, based on the rotated type-II DPs, off-axis conical diffractions have been both realized and experimentally observed. Meanwhile, we discovered that during the rotation process, the type-II DPs transform into off-axis type-I DPs, but still strongly tilted, resulting in the emergence of negative refractions. Hence, the generic method we propose for inducing type-II or strongly tilted type-I DPs without the high-symmetry limitations opens potential avenues for related research. For example, the observed off-axis conical diffraction and negative refraction could inspire future development and applications in photonics and other Bloch-wave systems.

physics.optics↗

Nonlocal Generation of Fano Resonance with No Symmetry Breaking in THz Hybrid Metasurfaces

Fano resonance, arising from the interference between a discrete resonance and a continuum of states, results in sharp and asymmetric line shapes and has significant applications in advanced photonic devices, particularly in sensing, filtering, and nonlinear optics. Nowadays, metasurfaces comprised of engineering microstructures play a crucial role in generation and manipulation of Fano resonance in photonics. However, current metasurfaces dominantly rely on local symmetry breaking of the microstructures to induce Fano resonances, which significant limits their tunability and scalable fabrication for practical applications. To address the challenge, a metal-dielectric hybrid metasurface is demonstrated to achieve nonlocal generation of Fano resonance with no symmetry breaking in the terahertz (THz) band. The Fano resonance, including its existence and peak frequency, is sensitively controlled by the thickness and dielectric constant of the dielectric layer, which is experimentally observed. Our analysis elucidates that the metallic layer with a pair of dumbbell holes leads to the band folding and coupling of guided modes within the dielectric layer. When the thickness or dielectric constant surpasses a critical value, the guided mode resonance falls below the diffraction limit, resulting in a unique nonlocal Fano resonance due to the interaction between the resonance and background transmission facilitated by dumbbell holes. Furthermore, the Fano transmission peak corresponds to an anapole excitation, revealed by multipole calculations. Benefiting from the ability to control the Fano resonance with no symmetry breaking, the proposed hybrid THz metasurface will advance broad applications in the fields of sensors, optical switches, and tunable filters.

physics.optics↗

Twist-enabled Transmissive Metasurface with Co-polarized Geometric Phase

Metasurfaces have offered unprecedented control over electromagnetic (EM) waves across a wide range of frequency spectrum by manipulating their phase, amplitude, and polarization at subwavelength scales. Full wavefront control using metasurfaces requires 2π phase modulation, which is essential for advanced optical and photonic engineering. Common approaches, such as the Pancharatnam-Berry (PB) phases and resonant phases, face stringent limitations: PB phases essentially depend on circular polarization conversion, while resonant phases are inherently narrowband and require a complex design process. To overcome these challenges, we propose a broadband metasurface with a co-polarized transmissive geometric phase that achieves 2π phase coverage while conserving the circular polarization of incident EM waves. This co-polarized phase is enabled by a local twist angle between the upper and lower metallic patterns, forming a branch cut in the parameter space determined by the twist angle and frequency. The branch cut connects phase singularities of opposite chirality, ensuring broadband 2π phase coverage. We experimentally validate the presence of the branch cut and demonstrate broadband generation of arbitrary orbital angular momentum (OAM) for co-polarized output. Our approach provides a versatile method for designing broadband metasurfaces without altering circular polarizations, paving the way for development of compact optical and photonic devices.

physics.optics↗

An Inertial Sequence Learning Framework for Vehicle Speed Estimation via Smartphone IMU

Accurately estimating vehicle velocity via smartphone is critical for mobile navigation and transportation. This paper introduces a cutting-edge framework for velocity estimation that incorporates temporal learning models, utilizing Inertial Measurement Unit (IMU) data and is supervised by Global Navigation Satellite System (GNSS) information. The framework employs a noise compensation network to fit the noise distribution between sensor measurements and actual motion, and a pose estimation network to align the coordinate systems of the phone and the vehicle. To enhance the model's generalizability, a data augmentation technique that mimics various phone placements within the car is proposed. Moreover, a new loss function is designed to mitigate timestamp mismatches between GNSS and IMU signals, effectively aligning the signals and improving the velocity estimation accuracy. Finally, we implement a highly efficient prototype and conduct extensive experiments on a real-world crowdsourcing dataset, resulting in superior accuracy and efficiency.

cs.RO↗

DC-Seg: Disentangled Contrastive Learning for Brain Tumor Segmentation with Missing Modalities

Accurate segmentation of brain images typically requires the integration of complementary information from multiple image modalities. However, clinical data for all modalities may not be available for every patient, creating a significant challenge. To address this, previous studies encode multiple modalities into a shared latent space. While somewhat effective, it remains suboptimal, as each modality contains distinct and valuable information. In this study, we propose DC-Seg (Disentangled Contrastive Learning for Segmentation), a new method that explicitly disentangles images into modality-invariant anatomical representation and modality-specific representation, by using anatomical contrastive learning and modality contrastive learning respectively. This solution improves the separation of anatomical and modality-specific features by considering the modality gaps, leading to more robust representations. Furthermore, we introduce a segmentation-based regularizer that enhances the model's robustness to missing modalities. Extensive experiments on the BraTS 2020 and a private white matter hyperintensity(WMH) segmentation dataset demonstrate that DC-Seg outperforms state-of-the-art methods in handling incomplete multimodal brain tumor segmentation tasks with varying missing modalities, while also demonstrate strong generalizability in WMH segmentation. The code is available at https://github.com/CuCl-2/DC-Seg.

cs.CV↗

Phenotype-Guided Generative Model for High-Fidelity Cardiac MRI Synthesis: Advancing Pretraining and Clinical Applications

Cardiac Magnetic Resonance (CMR) imaging is a vital non-invasive tool for diagnosing heart diseases and evaluating cardiac health. However, the limited availability of large-scale, high-quality CMR datasets poses a major challenge to the effective application of artificial intelligence (AI) in this domain. Even the amount of unlabeled data and the health status it covers are difficult to meet the needs of model pretraining, which hinders the performance of AI models on downstream tasks. In this study, we present Cardiac Phenotype-Guided CMR Generation (CPGG), a novel approach for generating diverse CMR data that covers a wide spectrum of cardiac health status. The CPGG framework consists of two stages: in the first stage, a generative model is trained using cardiac phenotypes derived from CMR data; in the second stage, a masked autoregressive diffusion model, conditioned on these phenotypes, generates high-fidelity CMR cine sequences that capture both structural and functional features of the heart in a fine-grained manner. We synthesized a massive amount of CMR to expand the pretraining data. Experimental results show that CPGG generates high-quality synthetic CMR data, significantly improving performance on various downstream tasks, including diagnosis and cardiac phenotypes prediction. These gains are demonstrated across both public and private datasets, highlighting the effectiveness of our approach. Code is availabel at https://anonymous.4open.science/r/CPGG.

cs.CV↗

Enhancing LLM-Based Agents via Global Planning and Hierarchical Execution

Intelligent agent systems based on Large Language Models (LLMs) have shown great potential in real-world applications. However, existing agent frameworks still face critical limitations in task planning and execution, restricting their effectiveness and generalizability. Specifically, current planning methods often lack clear global goals, leading agents to get stuck in local branches, or produce non-executable plans. Meanwhile, existing execution mechanisms struggle to balance complexity and stability, and their limited action space restricts their ability to handle diverse real-world tasks. To address these limitations, we propose GoalAct, a novel agent framework that introduces a continuously updated global planning mechanism and integrates a hierarchical execution strategy. GoalAct decomposes task execution into high-level skills, including searching, coding, writing and more, thereby reducing planning complexity while enhancing the agents' adaptability across diverse task scenarios. We evaluate GoalAct on LegalAgentBench, a benchmark with multiple types of legal tasks that require the use of multiple types of tools. Experimental results demonstrate that GoalAct achieves state-of-the-art (SOTA) performance, with an average improvement of 12.22% in success rate. These findings highlight GoalAct's potential to drive the development of more advanced intelligent agent systems, making them more effective across complex real-world applications. Our code can be found at https://github.com/cjj826/GoalAct.

cs.IR↗

Overview of the NTCIR-18 Automatic Evaluation of LLMs (AEOLLM) Task

In this paper, we provide an overview of the NTCIR-18 Automatic Evaluation of LLMs (AEOLLM) task. As large language models (LLMs) grow popular in both academia and industry, how to effectively evaluate the capacity of LLMs becomes an increasingly critical but still challenging issue. Existing methods can be divided into two types: manual evaluation, which is expensive, and automatic evaluation, which faces many limitations including task format (the majority belong to multiple-choice questions) and evaluation criteria (occupied by reference-based metrics). To advance the innovation of automatic evaluation, we propose the AEOLLM task which focuses on generative tasks and encourages reference-free methods. Besides, we set up diverse subtasks such as dialogue generation, text expansion, summary generation and non-factoid question answering to comprehensively test different methods. This year, we received 48 runs from 4 teams in total. This paper will describe the background of the task, the data set, the evaluation measures and the evaluation results, respectively.

cs.CL↗