arXiv Science⌕ Search

arXiv subjects

Guanrui Li

Publications and source records attributed to Guanrui Li.

At least 19 recordsLinked to original sources

ClearNav: Perception-Aligned Quadrotor Flight Using Differential-Physics

Autonomous quadrotor flight in cluttered environment is an key capability for tasks like inspection and search. Navigation policies trained in simulation and transferred to hardware can fly at high speed in open space, but they can still collide as obstacle clearance shrinks. We attribute most of these collisions to a single mechanism, namely motion in directions the onboard camera does not observe. Heading that is not aligned with the direction of travel and lateral excursion during obstacle avoidance both carry the vehicle toward obstacles outside its field of view. We introduce ClearNav, a navigation policy trained with two reward terms that constrain motion to the observed direction, a forward-looking heading target and a penalty on lateral velocity. A third term penalizes speed near obstacles so that an obstacle entering the field of view remains avoidable. In simulation, across 18 held-out scenarios with 2304 paired flights per policy unseen in training, ClearNav improves success by 6.8 points, cuts the collision rate by 65% relative to the state of the arts, and flies at maximum 5m/s. For the proximity term alone under matched commanded speeds, the collision reduction still holds at 70%. The effect is significant on static scenes and consistent in direction on moving obstacles, though not significant there at the suite level, showing that safer flight in clutter is possible even on the limited sensors and compute of small drones. We also validate our navigation policy in a real-world cluttered environment, showing that it enables the quadrotor to navigate through the cluttered environment successfully and safely.

cs.RO↗

Safety-Critical Quadrotor Navigation Using Fourth-Order Control Barrier Functions with Full Nonlinear Quadrotor Dynamics

Safety-critical quadrotor navigation in cluttered environments typically relies on hierarchical architectures in which a high-level safety filter modifies position references that are then tracked by a separate attitude controller. However, this separation can create a mismatch between translational safety objectives and attitude evolution. To address this gap, we propose a safety controller based on fourth-order control barrier functions (CBFs) that explicitly incorporates the full nonlinear quadrotor dynamics, including attitude dynamics and torque-level actuation. Furthermore, we apply the integral high-order CBF technique to resolve the mixed-relative degree issue in the derived constraint formulation. The resulting formulation enforces obstacle-avoidance constraints while optimizing control torques, granting the safety layer direct authority over attitude behavior and eliminating the hierarchical disconnect inherent in reference-tracking safety filters. We validate the approaches in both high-fidelity simulation and real-world flight experiments, demonstrating reliable constraint satisfaction and successful obstacle avoidance. These results suggest that torque-level high-order CBFs provide a practical pathway to provably safer quadrotor navigation under full rigid-body dynamics.

cs.RO↗

DQ-MPCC: Dual-Quaternion MPCC for Quadrotor Racing

Quadrotor racing demands aggressive attitude and progress control while passing through every gate, and conventional quadrotor MPCC formulations state the prediction model in inertial coordinates and the attitude error in the body frame. We present a Dual-Quaternion Model Predictive Contouring Control (DQ-MPCC) for quadrotor racing in which the pose is a unit dual quaternion and the contouring errors are projected onto the tangent space of the dual quaternion manifold, expressed in the desired body frame: the same rigid-body dynamics as the conventional model, in unified pose-twist coordinates in the body frame. We compare DQ-MPCC against a baseline MPCC through Monte Carlo software-in-the-loop simulations and real-world racing on an eight-gate circuit of 11x4.5x3.65 m. With the same gains in simulation and hardware, DQ-MPCC keeps every crossing of its completed flights within the prescribed geometric margin, whereas the baseline exceeds it, its median worst-gate offset growing by 71.5% sim-to-real against a 10.1% decrease for DQ-MPCC. Among the configurations that keep every simulated gate crossing within the geometric margin, DQ-MPCC also reduces the minimum lap time by 6.7%, and by 10.5% in the real-world flights, while running onboard at 100 Hz.

cs.RO↗

VBT-MPC: Vision-Based Tactile MPC for Contour Following

Tactile sensing plays a key role in robotic manipulation, particularly in tasks like surface inspection. Successful execution requires maintaining contact while accurately tracking object contours. In this work, we propose a Vision-Based Tactile Model Predictive Control (VBT-MPC) framework for robotic contour following using a Vision-Based Tactile Sensor (VBTS) mounted in an eye-in-hand configuration. The proposed controller operates directly in contour features space, thereby avoiding the need for separate pose-estimation modules or complex force-control architectures. We further compare our VBT-MPC with visual-servoing strategies adapted to tactile features, and evaluate contour tracking on objects with diverse geometries and materials in both simulation and real-world experiments.

cs.RO↗

PolyFly: Polytopic Optimal Planning for Collision-Free Cable-Suspended Aerial Payload Transportation

Aerial transportation robots using suspended cables have emerged as versatile platforms for disaster response and rescue operations. To maximize the capabilities of these systems, robots need to aggressively fly through tightly constrained environments, such as dense forests and structurally unsafe buildings, while minimizing flight time and avoiding obstacles. Existing methods geometrically over-approximate the vehicle and obstacles, leading to conservative maneuvers and increased flight times. We eliminate these restrictions by proposing PolyFly, an optimal global planner which considers a non-conservative representation for aerial transportation by modeling each physical component of the environment, and the robot (quadrotor, cable and payload), as independent polytopes. We further increase the model accuracy by incorporating the attitude of the physical components by constructing orientation-aware polytopes. The resulting optimal control problem is efficiently solved by converting the polytope constraints into smooth differentiable constraints via duality theory. We compare our method against the existing state-of-the-art approach in eight maze-like environments and show that PolyFly produces faster trajectories in each scenario. We also experimentally validate our proposed approach on a real quadrotor with a suspended payload, demonstrating the practical reliability and accuracy of our method.

cs.RO↗

ES-HPC-MPC: Exponentially Stable Hybrid Perception Constrained MPC for Quadrotor with Suspended Payloads

Aerial transportation using quadrotors with cable-suspended payloads holds great potential for applications in disaster response, logistics, and infrastructure maintenance. However, their hybrid and underactuated dynamics pose significant control and perception challenges. Traditional approaches often assume a taut cable condition, limiting their effectiveness in real-world applications where slack-to-taut transitions occur due to disturbances. We introduce ES-HPC-MPC, a model predictive control framework that enforces exponential stability and perception-constrained control under hybrid dynamics. Our method leverages Exponentially Stabilizing Control Lyapunov Functions (ES-CLFs) to enforce stability during the tasks and Control Barrier Functions (CBFs) to maintain the payload within the onboard camera's field of view (FoV). We validate our method through both simulation and real-world experiments, demonstrating stable trajectory tracking and reliable payload perception. We validate that our method maintains stability and satisfies perception constraints while tracking dynamically infeasible trajectories and when the system is subjected to hybrid mode transitions caused by unexpected disturbances.

eess.SY↗

DQ-NMPC: Dual-Quaternion NMPC for Quadrotor Flight

MAVs have great potential to assist humans in complex tasks, with applications ranging from logistics to emergency response. Their agility makes them ideal for operations in complex and dynamic environments. However, achieving precise control in agile flights remains a significant challenge, particularly due to the underactuated nature of quadrotors and the strong coupling between their translational and rotational dynamics. In this work, we propose a novel NMPC framework based on dual-quaternions (DQ-NMPC) for quadrotor flight. By representing both quadrotor dynamics and the pose error directly on the dual-quaternion manifold, our approach enables a compact and globally non-singular formulation that captures the quadrotor coupled dynamics. We validate our approach through simulations and real-world experiments, demonstrating better numerical conditioning and significantly improved tracking performance, with reductions in position and orientation errors of up to 56.11% and 56.77%, compared to a conventional baseline NMPC method. Furthermore, our controller successfully handles aggressive trajectories, reaching maximum speeds up to 13.66 m/s and accelerations reaching 4.2 g within confined space conditions of dimensions 11m x 4.5m x 3.65m under which the baseline controller fails.

cs.RO↗

Trajectory Planning Using Safe Ellipsoidal Corridors as Projections of Orthogonal Trust Regions

Planning collision free trajectories in complex environments remains a core challenge in robotics. Existing corridor based planners which rely on decomposition of the free space into collision free subsets scale poorly with environmental complexity and require explicit allocations of time windows to trajectory segments. We introduce a new trajectory parameterization that represents trajectories in a nonconvex collision free corridor as being in a convex cartesian product of balls. This parameterization allows us to decouple problem size from geometric complexity of the solution and naturally avoids explicit time allocation by allowing trajectories to evolve continuously inside ellipsoidal corridors. Building on this representation, we formulate the Orthogonal Trust Region Problem (Orth-TRP), a specialized convex program with separable block constraints, and develop a solver that exploits this parallel structure and the unique structure of each parallel subproblem for efficient optimization. Experiments on a quadrotor trajectory planning benchmark show that our approach produces smoother trajectories and lower runtimes than state-of-the-art corridor based planners, especially in highly complicated environments.

cs.RO↗

Intuitive Human-Drone Collaborative Navigation in Unknown Environments through Mixed Reality

Considering the widespread integration of aerial robots in inspection, search and rescue, and monitoring tasks, there is a growing demand to design intuitive human-drone interfaces. These aim to streamline and enhance the user interaction and collaboration process during drone navigation, ultimately expediting mission success and accommodating users' inputs. In this paper, we present a novel human-drone mixed reality interface that aims to (a) increase human-drone spatial awareness by sharing relevant spatial information and representations between the human equipped with a Head Mounted Display (HMD) and the robot and (b) enable safer and intuitive human-drone interactive and collaborative navigation in unknown environments beyond the simple command and control or teleoperation paradigm. We validate our framework through extensive user studies and experiments in a simulated post-disaster scenario, comparing its performance against a traditional First-Person View (FPV) control systems. Furthermore, multiple tests on several users underscore the advantages of the proposed solution, which offers intuitive and natural interaction with the system. This demonstrates the solution's ability to assist humans during a drone navigation mission, ensuring its safe and effective execution.

cs.RO↗

Optimal Trajectory Planning for Cooperative Manipulation with Multiple Quadrotors Using Control Barrier Functions

In this paper, we present a novel trajectory planning algorithm for cooperative manipulation with multiple quadrotors using control barrier functions (CBFs). Our approach addresses the complex dynamics of a system in which a team of quadrotors transports and manipulates a cable-suspended rigid-body payload in environments cluttered with obstacles. The proposed algorithm ensures obstacle avoidance for the entire system, including the quadrotors, cables, and the payload in all six degrees of freedom (DoF). We introduce the use of CBFs to enable safe and smooth maneuvers, effectively navigating through cluttered environments while accommodating the system's nonlinear dynamics. To simplify complex constraints, the system components are modeled as convex polytopes, and the Duality theorem is employed to reduce the computational complexity of the optimization problem. We validate the performance of our planning approach both in simulation and real-world environments using multiple quadrotors. The results demonstrate the effectiveness of the proposed approach in achieving obstacle avoidance and safe trajectory generation for cooperative transportation tasks.

cs.RO↗

Human-Aware Physical Human-Robot Collaborative Transportation and Manipulation with Multiple Aerial Robots

Human-robot interaction will play an essential role in various industries and daily tasks, enabling robots to effectively collaborate with humans and reduce their physical workload. Most of the existing approaches for physical human-robot interaction focus on collaboration between a human and a single ground or aerial robot. In recent years, very little progress has been made in this research area when considering multiple aerial robots, which offer increased versatility and mobility. This paper proposes a novel approach for physical human-robot collaborative transportation and manipulation of a cable-suspended payload with multiple aerial robots. The proposed method enables smooth and intuitive interaction between the transported objects and a human worker. In the same time, we consider distance constraints during the operations by exploiting the internal redundancy of the multi-robot transportation system. The key elements of our approach are (a) a collaborative payload external wrench estimator that does not rely on any force sensor; (b) a 6D admittance controller for human-aerial-robot collaborative transportation and manipulation; (c) a human-aware force distribution that exploits the internal system redundancy to guarantee the execution of additional tasks such inter-human-robot separation without affecting the payload trajectory tracking or quality of interaction. We validate the approach through extensive simulation and real-world experiments. These include scenarios where the robot team assists the human in transporting and manipulating a load, or where the human helps the robot team navigate the environment. We experimentally demonstrate for the first time, to the best of our knowledge, that our approach enables a quadrotor team to physically collaborate with a human in manipulating a payload in all 6 DoF in collaborative human-robot transportation and manipulation tasks.

cs.RO↗

HPA-MPC: Hybrid Perception-Aware Nonlinear Model Predictive Control for Quadrotors with Suspended Loads

Quadrotors equipped with cable-suspended loads represent a versatile, low-cost, and energy efficient solution for aerial transportation, construction, and manipulation tasks. However, their real-world deployment is hindered by several challenges. The system is difficult to control because it is nonlinear, underactuated, involves hybrid dynamics due to slack-taut cable modes, and evolves on complex configuration spaces. Additionally, it is crucial to estimate the full state and the cable's mode transitions in real-time using on-board sensors and computation. To address these challenges, we present a novel Hybrid Perception-Aware Nonlinear Model Predictive Control (HPA-MPC) control approach for quadrotors with suspended loads. Our method considers the complete hybrid system dynamics and includes a perception-aware cost to ensure the payload remains visible in the robot's camera during navigation. Furthermore, the full state and hybrid dynamics' transitions are estimated using onboard sensors. Experimental results demonstrate that our approach enables stable load tracking control, even during slack-taut transitions, and operates entirely onboard. The experiments also show that the perception-aware term effectively keeps the payload in the robot's camera field of view when a human operator interacts with the load.

cs.RO↗

DualQuat-LOAM: LiDAR Odometry and Mapping parametrized on Dual Quaternions

This paper reports on a novel method for LiDAR odometry estimation, which completely parameterizes the system with dual quaternions. To accomplish this, the features derived from the point cloud, including edges, surfaces, and Stable Triangle Descriptor (STD), along with the optimization problem, are expressed in the dual quaternion set. This approach enables the direct combination of translation and orientation errors via dual quaternion operations, greatly enhancing pose estimation, as demonstrated in comparative experiments against other state-of-the-art methods. Our approach reduced drift error compared to other LiDAR-only-odometry methods, especially in scenarios with sharp curves and aggressive movements with large angular displacement. DualQuat-LOAM is benchmarked against several public datasets. In the KITTI dataset it has a translation and rotation error of 0.79% and 0.0039°/m, with an average run time of 53 ms.

cs.RO↗

Decentralized Nonlinear Model Predictive Control for Safe Collision Avoidance in Quadrotor Teams with Limited Detection Range

Multi-quadrotor systems face significant challenges in decentralized control, particularly with safety and coordination under sensing and communication limitations. State-of-the-art methods leverage Control Barrier Functions (CBFs) to provide safety guarantees but often neglect actuation constraints and limited detection range. To address these gaps, we propose a novel decentralized Nonlinear Model Predictive Control (NMPC) that integrates Exponential CBFs (ECBFs) to enhance safety and optimality in multi-quadrotor systems. We provide both conservative and practical minimum bounds of the range that preserve the safety guarantees of the ECBFs. We validate our approach through extensive simulations with up to 10 quadrotors and 20 obstacles, as well as real-world experiments with 3 quadrotors. Results demonstrate the effectiveness of the proposed framework in realistic settings, highlighting its potential for reliable quadrotor teams operations.

cs.RO↗

Experimental System Design of an Active Fault-Tolerant Quadrotor

Quadrotors have gained popularity over the last decade, aiding humans in complex tasks such as search and rescue, mapping and exploration. Despite their mechanical simplicity and versatility compared to other types of aerial vehicles, they remain vulnerable to rotor failures. In this paper, we propose an algorithmic and mechanical approach to addressing the quadrotor fault-tolerant problem in case of rotor failures. First, we present a fault-tolerant detection and control scheme that includes various attitude error metrics. The scheme transitions to a fault-tolerant control mode by surrendering the yaw control. Subsequently, to ensure compatibility with platform sensing constraints, we investigate the relationship between variations in robot rotational drag, achieved through a modular mechanical design appendage, resulting in yaw rates within sensor limits. This analysis offers a platform-agnostic framework for designing more reliable and robust quadrotors in the event of rotor failures. Extensive experimental results validate the proposed approach providing insights into successfully designing a cost-effective quadrotor capable of fault-tolerant control. The overall design enhances safety in scenarios of faulty rotors, without the need for additional sensors or computational resources.

cs.RO↗

Nonlinear Model Predictive Control for Cooperative Transportation and Manipulation of Cable Suspended Payloads with Multiple Quadrotors

Autonomous Micro Aerial Vehicles (MAVs) such as quadrotors equipped with manipulation mechanisms have the potential to assist humans in tasks such as construction and package delivery. Cables are a promising option for manipulation mechanisms due to their low weight, low cost, and simple design. However, designing control and planning strategies for cable mechanisms presents challenges due to indirect load actuation, nonlinear configuration space, and highly coupled system dynamics. In this paper, we propose a novel Nonlinear Model Predictive Control (NMPC) method that enables a team of quadrotors to manipulate a rigid-body payload in all 6 degrees of freedom via suspended cables. Our approach can concurrently exploit, as part of the receding horizon optimization, the available mechanical system redundancies to perform additional tasks such as inter-robot separation and obstacle avoidance while respecting payload dynamics and actuator constraints. To address real-time computational requirements and scalability, we employ a lightweight state vector parametrization that includes only payload states in all six degrees of freedom. This also enables the planning of trajectories on the $SE(3)$ manifold load configuration space, thereby also reducing planning complexity. We validate the proposed approach through simulation and real-world experiments.

cs.RO↗

RotorTM: A Flexible Simulator for Aerial Transportation and Manipulation

Low-cost autonomous Micro Aerial Vehicles (MAVs) have the potential to help humans by simplifying and speeding up complex tasks that require their interaction with the environment, such as construction, package delivery, and search and rescue. These systems, composed of single or multiple vehicles, can be endowed with passive connection mechanisms such as rigid links or cables to perform transportation and manipulation tasks. However, they are inherently complex since they are often underactuated and evolve in nonlinear manifold configuration spaces. In addition, the complexity of systems with cable-suspended load is further increased by the hybrid dynamics depending on the cables' varying tension conditions. This paper presents the first aerial transportation and manipulation simulator incorporating different payloads and passive connection mechanisms with full system dynamics, planning, and control algorithms. Furthermore, it includes a novel general model accounting for the transient hybrid dynamics for aerial systems with cable-suspended load to closely mimic real-world systems. The availability of a flexible and intuitive interface further contributes to its usability and versatility. Comparisons between simulations and real-world experiments with different vehicles' configurations show the fidelity of the simulator results with respect to real-world settings. The experiments also show the simulator's benefit for the rapid prototyping and transitioning of aerial transportation and manipulation systems to real-world deployment.

cs.RO↗

Geometric Fault-Tolerant Control of Quadrotors in Case of Rotor Failures: An Attitude Based Comparative Study

The ability of aerial robots to operate in the presence of failures is crucial in various applications that demand continuous operations, such as surveillance, monitoring, and inspection. In this paper, we propose a fault-tolerant control strategy for quadrotors that can adapt to single and dual complete rotor failures. Our approach augments a classic geometric tracking controller on $SO(3)\times\mathbb{R}^3$ to accommodate the effects of rotor failures. We provide an in-depth analysis of several attitude error metrics to identify the most appropriate design choice for fault-tolerant control strategies. To assess the effectiveness of these metrics, we evaluate trajectory tracking accuracies. Simulation results demonstrate the performance of the proposed approach.

cs.RO↗