arXiv subjects

Greg Calusine

Publications and source records attributed to Greg Calusine.

12 recordsLinked to original sources

arXiv2022

Broadband Squeezed Microwaves and Amplification with a Josephson Traveling-Wave Parametric Amplifier

Squeezing of the electromagnetic vacuum is an essential metrological technique used to reduce quantum noise in applications spanning gravitational wave detection, biological microscopy, and quantum information science. In superconducting circuits, the resonator-based Josephson-junction parametric amplifiers conventionally used to generate squeezed microwaves are constrained by a narrow bandwidth and low dynamic range. In this work, we develop a dual-pump, broadband Josephson traveling-wave parametric amplifier that combines a phase-sensitive extinction ratio of 56 dB with single-mode squeezing on par with the best resonator-based squeezers. We also demonstrate two-mode squeezing at microwave frequencies with bandwidth in the gigahertz range that is almost two orders of magnitude wider than that of contemporary resonator-based squeezers. Our amplifier is capable of simultaneously creating entangled microwave photon pairs with large frequency separation, with potential applications including high-fidelity qubit readout, quantum illumination and teleportation.

quant-ph↗

arXiv2020

Microwave Package Design for Superconducting Quantum Processors

Solid-state qubits with transition frequencies in the microwave regime, such as superconducting qubits, are at the forefront of quantum information processing. However, high-fidelity, simultaneous control of superconducting qubits at even a moderate scale remains a challenge, partly due to the complexities of packaging these devices. Here, we present an approach to microwave package design focusing on material choices, signal line engineering, and spurious mode suppression. We describe design guidelines validated using simulations and measurements used to develop a 24-port microwave package. Analyzing the qubit environment reveals no spurious modes up to 11GHz. The material and geometric design choices enable the package to support qubits with lifetimes exceeding 350 {\mu}s. The microwave package design guidelines presented here address many issues relevant for near-term quantum processors.

quant-ph↗

arXiv2020

Solid-state qubits integrated with superconducting through-silicon vias

As superconducting qubit circuits become more complex, addressing a large array of qubits becomes a challenging engineering problem. Dense arrays of qubits benefit from, and may require, access via the third dimension to alleviate interconnect crowding. Through-silicon vias (TSVs) represent a promising approach to three-dimensional (3D) integration in superconducting qubit arrays -- provided they are compact enough to support densely-packed qubit systems without compromising qubit performance or low-loss signal and control routing. In this work, we demonstrate the integration of superconducting, high-aspect ratio TSVs -- 10 $μ$m wide by 20 $μ$m long by 200 $μ$m deep -- with superconducting qubits. We utilize TSVs for baseband control and high-fidelity microwave readout of qubits using a two-chip, bump-bonded architecture. We also validate the fabrication of qubits directly upon the surface of a TSV-integrated chip. These key 3D integration milestones pave the way for the control and readout of high-density superconducting qubit arrays using superconducting TSVs.

quant-ph↗

arXiv2020

Comparison of Dielectric Loss in Titanium Nitride and Aluminum Superconducting Resonators

Lossy dielectrics are a significant source of decoherence in superconducting quantum circuits. In this report, we model and compare the dielectric loss in bulk and interfacial dielectrics in titanium nitride (TiN) and aluminum (Al) superconducting coplanar waveguide (CPW) resonators. We fabricate isotropically trenched resonators to produce a series of device geometries that accentuate a specific dielectric region's contribution to resonator quality factor. While each dielectric region contributes significantly to loss in TiN devices, the metal-air interface dominates the loss in the Al devices. Furthermore, we evaluate the quality factor of each TiN resonator geometry with and without a post-process hydrofluoric (HF) etch, and find that it reduced losses from the substrate-air interface, thereby improving the quality factor.

quant-ph↗

arXiv2019

Silicon Hard-Stop Spacers for 3D Integration of Superconducting Qubits

As designs for superconducting qubits become more complex, 3D integration of two or more vertically bonded chips will become necessary to enable increased density and connectivity. Precise control of the spacing between these chips is required for accurate prediction of circuit performance. In this paper, we demonstrate an improvement in the planarity of bonded superconducting qubit chips while retaining device performance by utilizing hard-stop silicon spacer posts. These silicon spacers are defined by etching several microns into a silicon substrate and are compatible with 3D-integrated qubit fabrication. This includes fabrication of Josephson junctions, superconducting air-bridge crossovers, underbump metallization and indium bumps. To qualify the integrated process, we demonstrate high-quality factor resonators on the etched surface and measure qubit coherence (T1, T2,echo > 40 μs) in the presence of silicon posts as near as 350 μm to the qubit.

physics.app-ph↗

arXiv2019

Microwave Packaging for Superconducting Qubits

Over the past two decades, the performance of superconducting quantum circuits has tremendously improved. The progress of superconducting qubits enabled a new industry branch to emerge from global technology enterprises to quantum computing startups. Here, an overview of superconducting quantum circuit microwave control is presented. Furthermore, we discuss one of the persistent engineering challenges in the field, how to control the electromagnetic environment of increasingly complex superconducting circuits such that they are simultaneously protected and efficiently controllable.

quant-ph↗

arXiv2018

Determining interface dielectric losses in superconducting coplanar waveguide resonators

Superconducting quantum computing architectures comprise resonators and qubits that experience energy loss due to two-level systems (TLS) in bulk and interfacial dielectrics. Understanding these losses is critical to improving performance in superconducting circuits. In this work, we present a method for quantifying the TLS losses of different bulk and interfacial dielectrics present in superconducting coplanar waveguide (CPW) resonators. By combining statistical characterization of sets of specifically designed CPW resonators on isotropically etched silicon substrates with detailed electromagnetic modeling, we determine the separate loss contributions from individual material interfaces and bulk dielectrics. This technique for analyzing interfacial TLS losses can be used to guide targeted improvements to qubits, resonators, and their superconducting fabrication processes.

quant-ph↗

arXiv2017

Analysis and mitigation of interface losses in trenched superconducting coplanar waveguide resonators

Improving the performance of superconducting qubits and resonators generally results from a combination of materials and fabrication process improvements and design modifications that reduce device sensitivity to residual losses. One instance of this approach is to use trenching into the device substrate in combination with superconductors and dielectrics with low intrinsic losses to improve quality factors and coherence times. Here we demonstrate titanium nitride coplanar waveguide resonators with mean quality factors exceeding two million and controlled trenching reaching 2.2 $μ$m into the silicon substrate. Additionally, we measure sets of resonators with a range of sizes and trench depths and compare these results with finite-element simulations to demonstrate quantitative agreement with a model of interface dielectric loss. We then apply this analysis to determine the extent to which trenching can improve resonator performance.

quant-ph↗

arXiv2015

Cavity-enhanced measurements of defect spins in silicon carbide

The identification of new solid-state defect qubit candidates in widely used semiconductors has the potential to enable the use of nanofabricated devices for enhanced qubit measurement and control operations. In particular, the recent discovery of optically active spin states in silicon carbide thin films offers a scalable route for incorporating defect qubits into on-chip photonic devices. Here we demonstrate the use of 3C silicon carbide photonic crystal cavities for enhanced excitation of color center defect spin ensembles in order to increase measured photoluminescence signal count rates, optically detected magnetic resonance signal intensities, and optical spin initialization rates. We observe up to a factor of 30 increase in the photoluminescence and ODMR signals from Ky5 color centers excited by cavity resonant excitation and increase the rate of ground-state spin initialization by approximately a factor of two. Furthermore, we show that the small excitation mode volume and enhanced excitation and collection efficiencies provided by the structures can be used to study inhomogeneous broadening in defect qubit ensembles. These results highlight some of the benefits that nanofabricated devices offer for engineering the local photonic environment of color center defect qubits to enable applications in quantum information and sensing.

cond-mat.mes-hall↗

arXiv2014

Silicon Carbide Photonic Crystal Cavities with Integrated Color Centers

The recent discovery of color centers with optically addressable spin states in 3C silicon carbide (SiC) similar to the negatively charged nitrogen vacancy center in diamond has the potential to enable the integration of defect qubits into established wafer scale device architectures for quantum information and sensing applications. Here we demonstrate the design, fabrication, and characterization of photonic crystal cavities in 3C SiC films with incorporated ensembles of color centers and quality factor (Q) to mode volume ratios similar to those achieved in diamond. Simulations show that optimized H1 and L3 structures exhibit Q as high as 45,000 and mode volumes of approximately $(λ/n)^{3}$. We utilize the internal color centers as a source of broadband excitation to characterize fabricated structures with resonances tuned to the color center zero phonon line and observe Q in the range of 900-1,500 with narrowband photoluminescence collection enhanced by up to a factor of 10. By comparing the Q factors observed for different geometries with finite-difference time-domain simulations, we find evidence that nonvertical sidewalls are likely the dominant source of discrepancies between our simulated and measured Q factors. These results indicate that defect qubits in 3C SiC thin films show clear promise as a simple, scalable platform for interfacing defect qubits with photonic, optoelectronic, and optomechanical devices.

cond-mat.mes-hall↗

arXiv2013

Electrically and mechanically tunable electron spins in silicon carbide color centers

The electron spins of semiconductor defects can have complex interactions with their host, particularly in polar materials like SiC where electrical and mechanical variables are intertwined. By combining pulsed spin resonance with ab-initio simulations, we show that spin-spin interactions within SiC neutral divacancies give rise to spin states with an enhanced Stark effect, sub-10**-6 strain sensitivity, and highly spin-dependent photoluminescence with intensity contrasts of 15-36%. These results establish SiC color centers as compelling systems for sensing nanoscale fields.

cond-mat.mes-hall↗

arXiv2013

Polytype control of spin qubits in silicon carbide

Crystal defects can confine isolated electronic spins and are promising candidates for solid-state quantum information. Alongside research focusing on nitrogen vacancy centers in diamond, an alternative strategy seeks to identify new spin systems with an expanded set of technological capabilities, a materials driven approach that could ultimately lead to "designer" spins with tailored properties. Here, we show that the 4H, 6H and 3C polytypes of SiC all host coherent and optically addressable defect spin states, including spins in all three with room-temperature quantum coherence. The prevalence of this spin coherence shows that crystal polymorphism can be a degree of freedom for engineering spin qubits. Long spin coherence times allow us to use double electron-electron resonance to measure magnetic dipole interactions between spin ensembles in inequivalent lattice sites of the same crystal. Together with the distinct optical and spin transition energies of such inequivalent spins, these interactions provide a route to dipole-coupled networks of separately addressable spins.

cond-mat.mes-hall↗