arXiv subjects

Gongbo Zhou

Publications and source records attributed to Gongbo Zhou.

4 recordsLinked to original sources

arXiv2026

FIRE-LIVWO: Robust LiDAR-Inertial-Visual-Wheel Odometry via Failure-Immune mmWave Radar Enhancement

Achieving robust SLAM in large-scale underground coal mines with complex structures and severe degeneracies remains highly challenging. Dense smoke and dust cause substantial loss of visual information and degrade LiDAR point-cloud features, while long, self-similar corridors induce geometric degeneration, leading to pronounced odometry drift. To address these issues, we propose FIRE-LIVWO: Failure-Immune mmWave Radar-Enhanced LiDAR-Inertial-Visual-Wheel Odometry, a tightly coupled multi-modal odometry framework based on an iterated error-state Kalman filter (IESKF). The framework fuses 4D mmWave radar, LiDAR, and visual features within a unified VoxelMap and jointly constructs LiDAR-radar point-to-plane residuals and sparse visual photometric residuals. In smoke-filled environments, we exploit the strong penetration of 4D mmWave radar and introduce pointwise Doppler velocity constraints to preserve state observability. In geometrically degenerate corridors, we tightly couple wheel odometry using non-holonomic constraints (NHC) and online lever-arm compensation to reduce drift. Our central contribution is a degeneration detection and adaptive fusion model switching strategy grounded in geometric and visual observability analysis, which quantifies observability online and dynamically adjusts modality weights. Real-world experiments in underground coal mines demonstrate that FIRE-LIVWO accurately identifies failure boundaries, enabling reliable modality switching under extreme conditions. Compared with baselines, it achieves superior accuracy and robustness (average localization error of 5.677m). We open source our code on Github to benefit the robotics community.

cs.RO↗

arXiv2025

CM-LIUW-Odometry: Robust and High-Precision LiDAR-Inertial-UWB-Wheel Odometry for Extreme Degradation Coal Mine Tunnels

Simultaneous Localization and Mapping (SLAM) in large-scale, complex, and GPS-denied underground coal mine environments presents significant challenges. Sensors must contend with abnormal operating conditions: GPS unavailability impedes scene reconstruction and absolute geographic referencing, uneven or slippery terrain degrades wheel odometer accuracy, and long, feature-poor tunnels reduce LiDAR effectiveness. To address these issues, we propose CoalMine-LiDAR-IMU-UWB-Wheel-Odometry (CM-LIUW-Odometry), a multimodal SLAM framework based on the Iterated Error-State Kalman Filter (IESKF). First, LiDAR-inertial odometry is tightly fused with UWB absolute positioning constraints to align the SLAM system with a global coordinate. Next, wheel odometer is integrated through tight coupling, enhanced by nonholonomic constraints (NHC) and vehicle lever arm compensation, to address performance degradation in areas beyond UWB measurement range. Finally, an adaptive motion mode switching mechanism dynamically adjusts the robot's motion mode based on UWB measurement range and environmental degradation levels. Experimental results validate that our method achieves superior accuracy and robustness in real-world underground coal mine scenarios, outperforming state-of-the-art approaches. We open source our code of this work on Github to benefit the robotics community.

cs.RO↗

arXiv2016

Fault Diagnosis of Rolling Element Bearings with a Spectrum Searching Method

Rolling element bearing faults in rotating systems are observed as impulses in the vibration signals, which are usually buried in noises. In order to effectively detect the fault of bearings, a novel spectrum searching method is proposed. The structural information of spectrum (SIOS) on a predefined basis is constructed through a searching algorithm, such that the harmonics of impulses generated by faults can be clearly identified and analyzed. Local peaks of the spectrum are located on a certain bin of the basis, and then the SIOS can interpret the spectrum via the number and energy of harmonics related to frequency bins of the basis. Finally bearings can be diagnosed based on the SIOS by identifying its dominant components. Mathematical formulation is developed to guarantee the correct construction of the SISO through searching. The effectiveness of the proposed method is verified with a simulation signal and a benchmark study of bearings.

cs.SD↗

arXiv2016

Bearing fault diagnosis based on spectrum images of vibration signals

Bearing fault diagnosis has been a challenge in the monitoring activities of rotating machinery, and it's receiving more and more attention. The conventional fault diagnosis methods usually extract features from the waveforms or spectrums of vibration signals in order to realize fault classification. In this paper, a novel feature in the form of images is presented, namely the spectrum images of vibration signals. The spectrum images are simply obtained by doing fast Fourier transformation. Such images are processed with two-dimensional principal component analysis (2DPCA) to reduce the dimensions, and then a minimum distance method is applied to classify the faults of bearings. The effectiveness of the proposed method is verified with experimental data.

cs.CV↗