arXiv subjects

Gerhard Neumann

Publications and source records attributed to Gerhard Neumann.

At least 19 recordsLinked to original sources

arXiv2026

SEAR: Sample Efficient Action Chunking Reinforcement Learning

Action chunking improves exploration and accelerates value propagation in long-horizon reinforcement learning, but naively applying off-policy methods to the temporally extended action space at reduced decision frequency offsets these gains, leading to poor sample efficiency. Existing online action chunking methods address these issues through computationally expensive critic-only approaches or by relying on offline data. We introduce SEAR, a sample-efficient off-policy algorithm that enables online reinforcement learning with action chunks by addressing both challenges. To handle high-dimensional action sequences, SEAR employs a causal transformer critic trained with multi-horizon targets that provide a training signal for every prefix of an action chunk, effectively increasing the useful gradients per sample. To restore decision frequency, SEAR operates with a receding horizon and random replanning, ensuring uniform state coverage while combining the fast value propagation of large chunks with the reactivity of small ones. SEAR outperforms state-of-the-art online reinforcement learning methods including SimbaV2 on challenging Metaworld manipulation tasks. Beyond online RL, applying SEAR to the offline-to-online method QC improves its performance on the demanding OGBench cube-triple tasks.

cs.LG↗

arXiv2026

Correct Robots Before They Make Mistakes: Proactive Human-in-the-Loop Intervention via Preference Learning

This paper presents Proactive Human-in-the-Loop (PHIL), a framework for proactive policy correction and preference-based post-training. PHIL enables operators to preview policy-predicted future motion and intervene before anticipated undesirable actions. During takeover, PHIL continues querying the policy and displaying its predicted trajectories in the physical workspace through an extended reality (XR) interface. PHIL pairs rejected policy predictions with corrective action chunks subsequently executed from the same physical state over the same horizon, and preference-based post-training encourages the policy to favor these corrections. This paper evaluates PHIL on four real-world manipulation tasks using a diffusion policy and a pretrained vision-language-action policy. With five correction episodes per condition, PHIL increases mean success rates across the evaluated tasks and demonstration budgets from 44.0% to 70.3% for the diffusion policy and from 57.8% to 76.9% for X-VLA, compared with HG-DAgger. Separately, policies trained with proactive corrections show fewer unnecessary recovery behaviors in successful episodes. Project page: https://intuitive-robots.github.io/PHIL-page/.

cs.RO↗

arXiv2026

Reinforcement Learning via Fixed-point Flow Matching

In maximum entropy and behavior-constrained reinforcement learning (RL), the optimal policy is given by a Boltzmann distribution. Generating samples from this distribution can be challenging, as it is often complex and multimodal. While flow policies trained with flow matching provide a powerful framework for representing such distributions, they traditionally rely on access to training data, which is generally unavailable in online RL. To address this limitation, we propose fixed-point flow matching (FFM), a data-free procedure for training and fine-tuning flow policies in RL. FFM leverages the target flow identity to formulate the actor update as a fixed-point iteration, utilizing a flow-matching-style regression objective where the critic's action gradients serve as regression targets. We show that the optimal policy is a fixed point of this iteration. Through extensive experiments, we demonstrate that FFM effectively fine-tunes pretrained flow policies in the offline-to-online setting and enables efficient and accurate training of flow policies from scratch in online RL. These results establish fixed-point flow matching as a principled approach for learning expressive flow-based policies without requiring training data.

cs.LG↗

arXiv2026

ATLAS: A Foundation Neural Sampler for Amorphous Materials

Amorphous materials exhibit exceptional mechanical and functional properties, yet their rugged energy landscapes are notoriously difficult to sample. Below the glass-transition temperature, conventional molecular dynamics and Monte Carlo become inefficient because equilibration relies on rare barrier-crossing events, while data-driven generative models are constrained by scarce and biased reference ensembles. Here, we introduce ATLAS, an efficient sampler that learns a diffusion process to generate Boltzmann-distributed amorphous structures directly from a target energy function. Parameterized by an equivariant graph neural network, ATLAS generalizes across system size, temperature, and composition. By exploiting the time reversal of the diffusion process, it enables efficient estimation of thermodynamic quantities and steering toward target observables. In two-dimensional Kob-Andersen systems, ATLAS reproduces parallel tempering Markov chain Monte Carlo structural distributions, free energies and entropies, achieving below 0.2% free energy error in the low-temperature glass regime with over 500-fold fewer energy evaluations. In Cu-Zr and Cr-Co-Ni metallic glasses, ATLAS recovers experimentally observed short-range-order trends and steers structures toward prescribed order parameters and optimized bulk moduli. Moreover, composition-amortized pretraining outperforms composition-specific training from scratch, reduces inverse-design costs by several hundred-fold, and enables sampling with expensive universal machine learning interatomic potentials. Coupled to a large language model agent, ATLAS searches an eight-element space for high-entropy metallic glasses balancing stiffness and ductility, identifying a converged Pareto frontier within 480 oracle evaluations. Together, these results establish ATLAS as a foundation model for sampling, steering and designing amorphous materials.

cond-mat.mtrl-sci↗

arXiv2026

VLA-FAIL: Efficient Task Failure Detection for Finetuned Vision-Language-Action Models

Vision-language-action models (VLAs) achieve state-of-the-art performance on many robotic manipulation tasks, yet they can still behave unpredictably in out-of-distribution scenarios. Runtime failure detection is therefore essential for the safe real-world deployment of VLAs.However, existing task failure detectors require computationally expensive action sampling, are based on architectural assumptions that limit their applicability to VLAs, or need access to failure rollouts. We propose VLA-FAIL, a lightweight and broadly applicable failure detection framework for VLAs that combines two novel failure detectors with minimal overhead, without requiring failure data. The first, last-layer Mahalanobis distance (LLMD), detects out-of-distribution states by measuring token-wise deviations in last-layer features relative to the training data. The second, action chunk consistency (ACC), exploits the temporal overlap induced by receding-horizon control and detects failures when consecutive action chunks become inconsistent. To capture the trade-off between detection accuracy and detection latency, we introduce \textsc{AUCPDT}, a threshold-independent metric that jointly evaluates precision, recall, and detection time. Through extensive real-world and simulation experiments, we demonstrate that LLMD and ACC capture complementary failure modes whose combination enables reliable and early failure detection across diverse tasks, frequently outperforming significantly more expensive baseline methods. Project page: https://vla-fail.github.io/vla-fail-2026

cs.LG↗

arXiv2026

Kernel-based External Validity of Experimental Studies

The external validity of a study is the extent to which its findings generalize to unseen experimental conditions, such as datasets. We formalize the results of a study together with its research question, and define external validity as the probability that two independent and same-sized replications of the study produce results whose maximum mean discrepancy (MMD) is below a given tolerance. This approach, centered on the choice of a space of results and of an appropriate reproducing kernel for the MMD, is flexible enough to be deployed on multiple different types of results and research questions. Additionally, we establish an asymptotic power-law relation between the size of a study and the quantiles of the MMD, which we use to estimate the desired size of an externally valid study from a small-scale preliminary study. We deploy our framework to rankings with ties and discuss kernels suited to different research questions. Experiments on existing case studies and on a simulated newly designed study illustrate the applicability of the framework. We release our code as part of the genexpy Python module.

stat.ME↗

arXiv2026

Bridge Matching Sampler: Scalable Sampling via Generalized Fixed-Point Diffusion Matching

Sampling from unnormalized densities using diffusion models has emerged as a powerful paradigm. However, while recent approaches that use least-squares `matching' objectives have improved scalability, they often necessitate significant trade-offs, such as restricting prior distributions or relying on unstable optimization schemes. By generalizing these methods as special forms of fixed-point iterations rooted in Nelson's relation, we develop a new method that addresses these limitations, called Bridge Matching Sampler (BMS). Our approach enables learning a stochastic transport map between arbitrary prior and target distributions with a single, scalable, and stable objective. Furthermore, we introduce a damped variant of this iteration that incorporates a regularization term to mitigate mode collapse and further stabilize training. Empirically, we demonstrate that our method enables sampling at unprecedented scales while preserving mode diversity, achieving state-of-the-art results on complex synthetic densities and high-dimensional molecular benchmarks.

cs.LG↗

arXiv2026

Towards Near-Real-Time Telemetry-Aware Routing with Neural Routing Algorithms

Routing algorithms are crucial for efficient computer network operations, and in many settings they must be able to react to traffic bursts within milliseconds. Live telemetry data can provide informative signals to routing algorithms, and recent work has trained neural networks to exploit such signals for traffic-aware routing. Yet, aggregating network-wide information is subject to communication delays, and existing neural approaches either assume unrealistic delay-free global states, or restrict routers to purely local telemetry. This leaves their deployability in real-world environments unclear. We cast telemetry-aware routing as a delay-aware closed-loop control problem and introduce a framework that trains and evaluates neural routing algorithms, while explicitly modeling communication and inference delays. On top of this framework, we propose LOGGIA, a scalable graph neural routing algorithm that predicts log-space link weights from attributed topology-and-telemetry graphs. It utilizes a data-driven pre-training stage, followed by on-policy Reinforcement Learning. Across synthetic and real network topologies, and unseen mixed TCP/UDP traffic sequences, LOGGIA consistently outperforms shortest-path baselines, whereas neural baselines fail once realistic delays are enforced. Our experiments further suggest that neural routing algorithms like LOGGIA perform best when deployed fully locally, i.e., observing network states and inferring actions at every router individually, as opposed to centralized decision making.

cs.LG↗

arXiv2026

RayViT: Ray-Conditioned Visual Representations for Viewpoint-Robust Imitation Learning

Visual imitation learning enables robots to acquire visuomotor skills directly from images, yet RGB observations lack explicit geometric cues, making learned policies brittle to camera perturbations. To address this, we propose \textbf{Ray-conditioned Vision Transformer Encoder (RayViT)}, a lightweight architecture that injects camera geometry into pretrained ViT backbones. RayViT represents camera geometry as a Plücker ray map, patchifies it into ray features, and uses gated cross-attention to produce a ray-conditioned class token. These ray features are added as dense positional embeddings, while the ray class token replaces the original ViT class token to provide a geometry-aware summary representation. We combine this approach with an auxiliary cosine similarity loss to consistently improve the performance and robustness for geometry-aware tokens. Experiments on sim- and real-robot tasks demonstrate that RayViT improves robustness by approximately 13 percentage points under camera perturbations in multi-task RoboCasa benchmark and by 1.78 average completed stages in real-world multi-task success rate compared to baselines.

cs.RO↗

arXiv2026

Nautilus: From One Prompt to Plug-and-Play Robot Learning

Robot learning research is fragmented across policy families, benchmark suites, and real robots; each implementation is entangled with the others in a complex combination matrix, making it an engineering nightmare to port any single element. General-purpose coding agents may occasionally bridge specific setups, but cannot close this gap at scale because they lack the procedural priors and validation practices that characterize robotics research workflows. We propose NAUTILUS, an open-source harness that turns a single user prompt -- for example, "Evaluate policy A with benchmark B" -- into ready-to-use reproduction, evaluation, fine-tuning, and deployment workflows. NAUTILUS provides: plug-and-play agent skill sets with distilled priors from robotics research; typed contracts among policies, simulators/benchmarks, and real-world robots; unified interfaces and execution environments; and a trustworthy agentic coding workflow with explicit, automated validation, and testing at each milestone. NAUTILUS can not only automatically generate the required adapters and containers for existing implementations, but also wrap and onboard new or user-provided policies, simulators/benchmarks, and robots, all connected via a uniform interface. This expands cross-validation coverage without hand-written glue code. Like a nautilus shell that grows by adding chambers, NAUTILUS scales by extending its execution in chambered units, making it a research harness for scalability rather than a hand-curated framework, and aiming to reduce the engineering burden of cross-family reproduction and evaluation in the ever-growing robot learning ecosystem.

cs.RO↗

arXiv2026

Scalable Maximum Entropy Reinforcement Learning for Diffusion Policies via Adjoint Matching

Diffusion policies have recently emerged as a powerful paradigm for representing complex action distributions in reinforcement learning (RL). However, their application to online RL remains limited by the challenge of scalable training in the absence of ground-truth data, where standard optimization techniques such as score matching are not directly applicable. In this work, we introduce a highly efficient algorithm for optimizing diffusion policies by leveraging recent advances in stochastic optimal control. Our approach is based on adjoint matching, which enables simulation-free training and circumvents the need for explicit likelihood estimation or costly backpropagation through the diffusion process. Furthermore, we propose several extensions that improve the robustness and stability of the method in practical settings. Empirical results demonstrate that our approach achieves competitive performance while significantly reducing computational overhead, making diffusion policies more viable for online RL scenarios.

cs.LG↗

arXiv2026

Trust-Region Diffusion Policies for Massively Parallel On-Policy RL

Reinforcement learning with massively parallel simulations has become a standard framework for developing robust, deployable policies; however, most existing approaches still rely on simple Gaussian policy parameterizations. Diffusion models provide a more expressive policy class and have shown strong performance on challenging control problems, yet most diffusion-based RL methods are designed for offline or off-policy training. In this work, we ask whether diffusion policies can be trained effectively in the massively parallel, on-policy regime. To this end, we introduce Trust-region Diffusion Policies (TruDi), which enables diffusion policies for on-policy RL with massively parallel simulations. This setting is particularly challenging because the data distribution changes quickly across updates, making stable training with complex policies difficult. TruDi addresses this by integrating a trust-region optimization rule to enforce a KL-divergence constraint over the entire diffusion trajectory. Empirically, we evaluate TruDi on a diverse set of 4 massively parallel RL benchmarks comprising a total of 73 tasks. Across these tasks, TruDi consistently outperforms or is on-par with strong baselines on standard tasks and achieves clear gains on more challenging humanoid control tasks, establishing a strong new baseline for massively parallel on-policy RL.

cs.LG↗

arXiv2026

PAWS: Preference Learning with Advantage-Weighted Segments

Preference-based reinforcement learning (PbRL) learns policies from human trajectory-level comparisons, avoiding explicit reward design and expert demonstrations. Existing methods typically train utility functions on trajectory or segment-level preferences while relying on per-step utility estimates during policy optimization. This training and inference mismatch induces a distribution shift that severely degrades temporal credit assignment and limits policy learning. We analyze this issue and propose PAWS, a segment-based preference learning method that performs policy updates directly using segment-level advantage functions. By aligning utility training with policy optimization, PAWS preserves trajectory-level preference information and avoids unreliable per-step learning signals. Experiments on simulated robotic manipulation and locomotion tasks demonstrate that PAWS consistently outperforms existing PbRL approaches, highlighting the importance of distribution-consistent preference learning.

cs.LG↗

arXiv2026

Fourier Features Let Agents Learn High Precision Policies with Imitation Learning

High-precision robotic manipulation requires fine-grained spatial reasoning that is often difficult to achieve with RGB-only policies due to depth ambiguity and perspective scale issues. Policies that leverage 3D information directly, such as those based on point clouds, offer a stronger geometric prior over purely image-based ones, yet their performance remains highly task-dependent. We hypothesize that this discrepancy may be due to the spectral bias of neural networks towards learning low frequency functions, which especially affects architectures conditioned on slow-moving Cartesian features. We thus propose to map point clouds from Cartesian space into high-dimensional Fourier space, effectively equipping the point cloud encoder with direct access to high-frequency features. We experimentally validate the use of Fourier features on challenging manipulation tasks from the RoboCasa and ManiSkill3 benchmarks and on a real robot setup. Despite their simplicity, we find that Fourier features provide significant benefits across diverse encoder architectures and benchmarks and are robust across hyperparameters. Our results indicate that Fourier features let policies leverage geometric details more effectively than Cartesian features, showing their potential as a general-purpose tool for point cloud-based imitation learning. We provide source code and videos on our project page: https://fourier-il.github.io/fourier-il

cs.LG↗

arXiv2026

Point Cloud Segmentation for Autonomous Clip Positioning in Laparoscopic Cholecystectomy on a Phantom

High-risk applications in robotics, such as robot-assisted surgery, present unique challenges. These systems must be both highly precise and interpretable in order to be deployed in environments with very low tolerance for error or unsafe exploration. We present the first robotic system to demonstrate autonomous clip positioning on a physical phantom in laparoscopic surgery, one of the most common interventions in general surgery. After segmentation of a colorless point cloud from a single camera, target positions for the clips are extracted using spline interpolation, and can then be adjusted by the human operator. The segmentation model is trained on only 60 hand-labeled real point clouds, reflecting data scarcity in the surgical domain. We overcome this with a combination of pre-training on 128,000 synthetic point clouds and two novel data augmentation techniques. The motion of the end-effector to each target is visualized for the operator, satisfying the unique motion constraints of minimally-invasive surgery while ensuring that the robot's actions are verifiable and interpretable. In real robot experiments, our system localizes targets with the required precision of 0.75mm at a 95% success rate and executes autonomous clip positioning with a 100% success rate. We provide insights that are applicable to many other surgical and non-surgical tasks that require identifying and navigating to a precise target. Source code and project page: https://github.com/balazsgyenes/kirurc

cs.RO↗

arXiv2026

Robot-DIFT: Correspondence-Sensitive Diffusion Features for Contact-Rich Robot Manipulation

Robot manipulation often fails in the final millimeters: a policy may recognize the right object yet miss the pose offsets, boundaries, or pre-contact alignments needed for action. We argue that such failures arise when semantic invariance suppresses correspondence cues for closed-loop control, or when these cues are not exposed to the policy in a usable form. Modern visual encoders provide strong semantic abstractions, but contact-rich manipulation requires correspondence sensitivity: discriminative feature responses to action-relevant changes in pose, boundary, and contact geometry. Diffusion features provide a strong prior for dense correspondence, but direct use is impractical due to stochasticity, latency, and representation drift. We introduce Robot-DIFT, a deterministic diffusion-derived backbone for real-time control. Through Manifold Distillation, Robot-DIFT converts a noise-conditioned diffusion Teacher into a clean-input, single-pass Student while preserving the teacher's feature manifold. A Spatial--Semantic Feature Pyramid Network (S2-FPN) fuses coarse-to-fine Student decoder features into visual tokens that expose semantic context and fine contact detail to the policy. Across RoboCasa, LIBERO-10, and real robots, Robot-DIFT outperforms vision--language, self-supervised, geometry-oriented, and diffusion baselines on contact-sensitive tasks. Controlled backbone/readout swaps show that S2-FPN unlocks, rather than replaces, the diffusion correspondence prior.

cs.RO↗

arXiv2026

Chunking the Critic: A Transformer-based Soft Actor-Critic with N-Step Returns

We introduce a sequence-conditioned critic for Soft Actor-Critic (SAC) that models trajectory context with a lightweight Transformer and trains on aggregated $N$-step targets. Unlike prior approaches that (i) score state-action pairs in isolation or (ii) rely on actor-side action chunking to handle long horizons, our method strengthens the critic itself by conditioning on short trajectory segments and integrating multi-step returns -- without importance sampling (IS). The resulting sequence-aware value estimates capture the critical temporal structure for extended-horizon and sparse-reward problems. On local-motion benchmarks, we further show that freezing critic parameters for several steps makes our update compatible with CrossQ's core idea, enabling stable training \emph{without} a target network. Despite its simplicity -- a 2-layer Transformer with 128-256 hidden units and a maximum update-to-data ratio (UTD) of $1$ -- the approach consistently outperforms standard SAC and strong off-policy baselines, with particularly large gains on long-trajectory control. These results highlight the value of sequence modeling and $N$-step bootstrapping on the critic side for long-horizon reinforcement learning.

cs.LG↗

arXiv2026

Smooth Sampling-Based Model Predictive Control Using Deterministic Samples

Sampling-based model predictive control (MPC) is effective for nonlinear systems but often produces non-smooth control inputs due to random sampling. To address this issue, we extend the model predictive path integral (MPPI) framework with deterministic sampling and improvements from cross-entropy method (CEM)--MPC, such as iterative optimization, proposing deterministic sampling MPPI (dsMPPI). This combination leverages the exponential weighting of MPPI alongside the efficiency of deterministic samples. Experiments demonstrate that dsMPPI achieves smoother trajectories compared to state-of-the-art methods.

eess.SY↗