arXiv subjects

Gerardo A. Paz-Silva

Publications and source records attributed to Gerardo A. Paz-Silva.

At least 19 recordsLinked to original sources

arXiv2026

Approaching the Fundamental Limit of Single-Shot Qubit Frequency Tracking with an Adiabatic Tangentially-Modulated Pulse

Understanding and mitigating noise in two-level quantum systems is essential for achieving high-fidelity qubit control. Conventional frequency tracking techniques, such as Ramsey interferometry, are fundamentally limited by trade-offs between sensitivity, bandwidth, and dynamic range. Here we introduce the adiabatic tangentially-modulated (ATM) pulse, a pulse derived from quantum adiabatic theory that maps qubit detuning onto a sigmoidal, near-binary response. Using numerical simulations supported by analytical modeling, we show that pulse sensitivity and detuning range can be independently engineered through simple design parameters. We derive scaling relations governing these quantities and demonstrate their agreement with simulation. A single-shot ATM measurement achieves sensitivity comparable to that obtained from multi-shot Ramsey averaging, enabling tracking of substantially higher frequency noise components with a lower closed-loop white-noise floor. In addition, this pulse exhibits strong robustness to amplitude fluctuations compared with binary response pulses derived from the Shinnar-Le Roux formalism. Together, these properties establish the ATM pulse as a promising approach for robust qubit frequency tracking.

quant-ph↗

arXiv2026

Multi-Qubit Entanglement of Unit Cell Pairs in SiMOS

Spin qubits in silicon-MOS (SiMOS) quantum dots have recently demonstrated compatibility with existing industry standard CMOS fabrication techniques. These devices have routinely achieved single- and two-qubit gate fidelities above 99% and demonstrated highly entangled two-qubit Bell states in isolated double quantum dot (DQD) unit cells, however coupling between unit cells has remained challenging. In this work, we present a two unit cell, four-qubit SiMOS processor with universal controllability and fully parallelised state initialisation and readout. We use this processor to generate maximally entangled three-qubit states, including the Greenberger-Horne-Zeilinger (GHZ) state, and certify multipartite entanglement through violation of the classical Mermin-witness bound. By using a fully symmetric dynamically decoupled gate sequence to create our entangled states, we are able to preserve the lifetime of the entanglement beyond $T_2^*$, to a time limited instead by $T_2^\textrm{Hahn}$. These demonstrations pave a road to the scalable operation of larger SiMOS processors, and achieving high purity, long-lived multi-qubit entangled states in them.

quant-ph↗

arXiv2026

Control-centric quantum noise spectroscopy of time-ordered polyspectra

Precise environmental-noise characterisation in open quantum systems is a key step toward high-fidelity quantum control and targeted decoherence suppression in computing and sensing applications. Non-parametric quantum noise spectroscopy (QNS) provides a general-purpose, model-agnostic framework for estimating the spectral properties of an environment. The ability to perform such protocols under realistic constraints is key to their practical applicability. Notably, it is important to account for control constraints and understand how they limit the ability to learn about noise correlations as experiment-agnostic objects. We show how adopting a control-centric point of view allows one to recast the noise spectroscopy problem in such a way that (i) the central objects are now the time-ordered polyspectra, (ii) control filter functions are no longer encumbered by time-ordering. In particular, we show that this approach enables the seamless generalisation of frequency-comb QNS protocols to arbitrary control scenarios without introducing additional control symmetries that effectively remove time-ordering from filter functions, improving estimation in typically pathological scenarios. We demonstrate the targeted reconstruction of the time-ordered polyspectra across classical Gaussian and quantum non-Gaussian environments via simulations.

quant-ph↗

arXiv2025

Mid-circuit logic executed in the qubit layer of a quantum processor

Practical quantum computers need to continuously exchange data between classical and quantum subsystems during a computation. Mid-circuit measurements of a qubits state are transferred to the classical electronics layer, and their outcome can inform feedforward operations that close the loop back to the quantum layer. These operations are crucial for fault-tolerant quantum computers, but the quantum-classical loop must be completed before the qubits decohere, presenting a substantial engineering challenge for full-scale systems comprising millions of qubits. Here we perform the first mid-circuit measurements in a system of silicon spin qubits, and show that feedforward operations can be performed without needing to route information to the classical layer. This in-layer approach leverages a backaction-driven control technique that has previously been considered a source of error. We benchmark our in-layer strategy, together with the standard FPGA-enabled approach, and analyse the performance of both methods using gate set tomography. Our results provide the first step towards moving resource-intensive classical processing into the quantum layer, an advance that could solve key engineering challenges, and drastically reduce the power budget of future quantum computers.

quant-ph↗

arXiv2025

Quantum Engineering of Qudits with Interpretable Machine Learning

Higher-dimensional quantum systems (qudits) offer advantages in information encoding, error resilience, and compact gate implementations, and naturally arise in platforms such as superconducting and solid-state systems. However, realistic conditions such as non-Markovian noise, non-ideal pulses, and beyond rotating wave approximation (RWA) dynamics, pose significant challenges for controlling and characterizing qudits. In this work, we present a machine-learning-based graybox framework for the control and noise characterization of qudits with arbitrary dimension, extending recent methods developed for single-qubit systems. Additionally, we introduce a local analytic expansion that enables interpretable modelling of the noise dynamics, providing a structured and efficient way to simulate system behaviour and compare different noise models. This interpretability feature allows us to to understand the mechanisms underlying successful control strategies; and opens the way for developing methods for distinguishing noise sources with similar effects. We demonstrate high-fidelity implementations of both global unitary operations as well as two-level subspace gates. Our work establishes a foundation for scalable and interpretable quantum control techniques applicable to both NISQ devices and finite-dimensional quantum systems, enhancing the performance of next-generation quantum technologies.

quant-ph↗

arXiv2024

Limitations to Dynamical Error Suppression and Gate-Error Virtualization from Temporally Correlated Nonclassical Noise

Realistic multi-qubit noise processes often result in error mechanisms that are not captured by the probabilistic, Markovian error models commonly employed in circuit-level analyses of quantum fault-tolerance. By working within an open-quantum system Hamiltonian formulation, we revisit the validity of the notion of a constant gate error in the presence of noise that is both temporally correlated and nonclassical, and whose impact is mitigated through perfect instantaneous dynamical decoupling subject to finite timing constraints. We study a minimal exactly solvable single-qubit model under Gaussian quantum dephasing noise, showing that the fidelity of a dynamically protected idling gate can depend strongly on its location in the circuit and the history of applied control, even when the system-side error propagation is fully removed through perfect reset operations. For digital periodic control, we prove that, under mild conditions on the low-frequency behavior of the nonclassical noise spectrum, the gate fidelity saturates at a value that is strictly smaller than the one attainable in the absence of control history; the presence of high-frequency noise peaks is also found as especially harmful, due to the possible onset of control-induced resonance effects. We explicitly relate these features to the evolution of the bath statistics during the computation, which has not been fully accounted for in existing treatments. We find that only if decoupling can keep the qubit highly pure over a timescale larger than the correlation time of the noise, the bath approximately converges to its original statistics and a stable-in-time control performance is recovered. Implications of this costly re-equilibration of the quantum bath statistics for layered quantum fault-tolerant architectures are discussed.

quant-ph↗

arXiv2024

Broadband spectroscopy of quantum noise

Characterizing noise is key to the optimal control of the quantum system it affects. Using a single-qubit probe and appropriate sequences of $\pi$ and non-$\pi$ pulses, we show how one can characterize the noise a quantum bath generates across a wide range of frequencies -- including frequencies below the limit set by the probe's $\mathbb{T}_2$ time. To do so we leverage an exact expression for the dynamics of the probe in the presence of non-$\pi$ pulses, and a general inequality between the symmetric (classical) and anti-symmetric (quantum) components of the noise spectrum generated by a Gaussian bath. Simulation demonstrates the effectiveness of our method.

quant-ph↗

arXiv2023

Resource-efficient digital characterization and control of classical non-Gaussian noise

We show the usefulness of frame-based characterization and control [PRX Quantum 2, 030315 (2021)] for non-Markovian open quantum systems subject to classical non-Gaussian dephasing. By focusing on the paradigmatic case of random telegraph noise and working in a digital window frame, we demonstrate how to achieve higher-order control-adapted spectral estimation for noise-optimized dynamical decoupling design. We find that, depending on the operating parameter regime, control that is optimized based on non-Gaussian noise spectroscopy can substantially outperform standard Walsh decoupling sequences as well as sequences that are optimized based solely on Gaussian noise spectroscopy. This approach is also intrinsically more resource-efficient than frequency-domain comb-based methods.

quant-ph↗

arXiv2021

Noise Detection with Spectator Qubits and Quantum Feature Engineering

Designing optimal control pulses that drive a noisy qubit to a target state is a challenging and crucial task for quantum engineering. In a situation where the properties of the quantum noise affecting the system are dynamic, a periodic characterization procedure is essential to ensure the models are updated. As a result, the operation of the qubit is disrupted frequently. In this paper, we propose a protocol that addresses this challenge by making use of a spectator qubit to monitor the noise in real-time. We develop a machine-learning-based quantum feature engineering approach for designing the protocol. The complexity of the protocol is front-loaded in a characterization phase, which allow real-time execution during the quantum computations. We present the results of numerical simulations that showcase the favorable performance of the protocol.

quant-ph↗

arXiv2020

Frame-Based Filter-Function Formalism for Quantum Characterization and Control

We introduce a theoretical framework for resource-efficient characterization and control of non-Markovian open quantum systems, which naturally allows for the integration of given, experimentally motivated, control capabilities and constraints. This is achieved by developing a transfer filter-function formalism based on the general notion of a frame and by appropriately tying the choice of frame to the available control. While recovering the standard frequency-based filter-function formalism as a special instance, this control-adapted generalization affords intrinsic flexibility and, crucially, it permits an efficient representation of the relevant control matrix elements and dynamical integrals if an appropriate finite-size frame condition is obeyed. Our frame-based formulation overcomes important limitations of existing approaches. In particular, we show how to implement quantum noise spectroscopy in the presence of nonstationary noise sources, and how to effectively achieve control-driven model reduction for noise-optimized prediction and quantum gate design.

quant-ph↗

arXiv2020

Beyond Quantum Noise Spectroscopy: modelling and mitigating noise with quantum feature engineering

The ability to use quantum technology to achieve useful tasks, be they scientific or industry related, boils down to precise quantum control. In general it is difficult to assess a proposed solution due to the difficulties in characterising the quantum system or device. These arise because of the impossibility to characterise certain components in situ, and are exacerbated by noise induced by the environment and active controls. Here we present a general purpose characterisation and control solution making use of a novel deep learning framework composed of quantum features. We provide the framework, sample data sets, trained models, and their performance metrics. In addition, we demonstrate how the trained model can be used to extract conventional indicators, such as noise power spectra.

quant-ph↗

arXiv2019

Extending comb-based spectral estimation to multiaxis quantum noise

We show how to achieve full spectral characterization of general multiaxis additive noise. Our pulsed spectral estimation technique is based on sequence repetition and frequency-comb sampling and is applicable even to models where a large qubit energy-splitting is present (as is typically the case for spin qubits in semiconductors, for example), as long as the noise is stationary and a second-order (Gaussian) approximation to the controlled reduced dynamics is viable. Our new result is crucial to extending the applicability of these protocols, now standard in dephasing-dominated platforms such as silicon-based qubits, to experimental platforms where both $T_1$ and $T_2$ processes are significant, such as superconducting qubits.

quant-ph↗

arXiv2018

On the dynamics of initially correlated open quantum systems: theory and applications

We show that the dynamics of any open quantum system that is initially correlated with its environment can be described by a set of (or less) completely positive maps, where d is the dimension of the system. Only one such map is required for the special case of no initial correlations. The same maps describe the dynamics of any system-environment state obtained from the initial state by a local operation on the system. The reduction of the system dynamics to a set of completely positive maps allows known numerical and analytic tools for uncorrelated initial states to be applied to the general case of initially correlated states, which we exemplify by solving the qubit dephasing model for such states, and provides a natural approach to quantum Markovianity for this case. We show that this set of completely positive maps can be experimentally characterised using only local operations on the system, via a generalisation of noise spectroscopy protocols. As further applications, we first consider the problem of retrodicting the dynamics of an open quantum system which is in an arbitrary state when it becomes accessible to the experimenter, and explore the conditions under which retrodiction is possible. We also introduce a related one-sided or limited-access tomography protocol for determining an arbitrary bipartite state, evolving under a sufficiently rich Hamiltonian, via local operations and measurements on just one component. We simulate this protocol for a physical model of particular relevance to nitrogen-vacancy centres, and in particular show how to reconstruct the density matrix of a set of three qubits, interacting via dipolar coupling and in the presence of local magnetic fields, by measuring and controlling only one of them.

quant-ph↗

arXiv2017

Bayesian Quantum Noise Spectroscopy

As commonly understood, the noise spectroscopy problem---characterizing the statistical properties of a noise process affecting a quantum system by measuring its response---is ill-posed. Ad-hoc solutions assume implicit structure which is often never determined. Thus it is unclear when the method will succeed or whether one should trust the solution obtained. Here we propose to treat the problem from the point of view of statistical estimation theory. We develop a Bayesian solution to the problem which allows one to easily incorporate assumptions which render the problem solvable. We compare several numerical techniques for noise spectroscopy and find the Bayesian approach to be superior in many respects.

quant-ph↗

arXiv2016

Multiqubit Spectroscopy of Gaussian Quantum Noise

We introduce multi-pulse quantum noise spectroscopy protocols for spectral estimation of the noise affecting multiple qubits coupled to Gaussian dephasing environments including both classical and quantum sources. Our protocols are capable of reconstructing all the noise auto- and cross-correlation spectra entering the multiqubit dynamics. We argue that this capability is crucial not only for metrological purposes, as it provides access to the asymmetric spectra associated with non-classical environments, but ultimately for achieving quantum fault-tolerance, as it enables the characterization of bath correlation functions. Our result relies on (i) an exact analytic solution for the reduced multiqubit dynamics that holds in the presence of an arbitrary Gaussian environment and dephasing-preserving control; (ii) the use of specific timing symmetries in the control, which allow for a frequency comb to be engineered for all filter functions of interest, and for the spectra to be related to experimentally accessible qubit observables. We show that quantum spectra have distinctive dynamical signatures, which we explore in two paradigmatic open-system models describing spin and charge qubits coupled to bosonic environments. Complete multiqubit noise spectroscopy is demonstrated numerically in a realistic setting consisting of two-exciton qubits coupled to a phonon bath. The estimated spectra allow us to accurately predict the exciton dynamics as well as extract the temperature and spectral density of the quantum environment.

quant-ph↗

arXiv2016

Dynamical decoupling sequences for multi-qubit dephasing suppression and long-time quantum memory

We consider a class of multi-qubit dephasing models that combine classical noise sources and linear coupling to a bosonic environment, and are controlled by arbitrary sequences of dynamical decoupling pulses. Building on a general transfer filter-function framework for open-loop control, we provide an exact representation of the controlled dynamics for arbitrary stationary non-Gaussian classical and quantum noise statistics, with analytical expressions emerging when all dephasing sources are Gaussian. This exact characterization is used to establish two main results. First, we construct multi-qubit sequences that ensure maximum high-order error suppression in both the time and frequency domain and that can be exponentially more efficient than existing ones in terms of total pulse number. Next, we show how long-time multi-qubit storage may be achieved by meeting appropriate conditions for the emergence of a fidelity plateau under sequence repetition, thereby generalizing recent results for single-qubit memory under Gaussian dephasing. In both scenarios, the key step is to endow multi-qubit sequences with a suitable displacement anti-symmetry property, which is of independent interest for applications ranging from environment-assisted entanglement generation to multi-qubit noise spectroscopy protocols.

quant-ph↗

arXiv2015

Qubit noise spectroscopy for non-Gaussian dephasing environments

We introduce open-loop quantum control protocols for characterizing the spectral properties of non-Gaussian noise, applicable to both classical and quantum dephasing environments. The basic idea is to engineer a multi-dimensional frequency comb via repetition of suitably designed pulse sequences, through which the desired high-order noise spectra may be related to observable properties of the qubit probe. We prove that access to a high time resolution is key to achieve spectral reconstruction over an extended bandwidth, overcoming limitations of existing schemes. Non-Gaussian spectroscopy is demonstrated for a classical noise model describing quadratic dephasing at an optimal point, as well as a quantum spin-boson model out of equilibrium. In both cases, we obtain spectral reconstructions that accurately predict the qubit dynamics in the non-Gaussian regime.

quant-ph↗

arXiv2014

A General Transfer-Function Approach to Noise Filtering in Open-Loop Quantum Control

We present a general transfer-function approach to noise filtering in open-loop Hamiltonian engineering protocols for open quantum systems. We show how to identify a computationally tractable set of fundamental filter functions, out of which arbitrary transfer filter functions may be assembled up to arbitrary high order in principle. Besides avoiding the infinite recursive hierarchy of filter functions that arises in general control scenarios, this fundamental filter-functions set suffices to characterize the error suppression capabilities of the control protocol in both the time and frequency domain. We prove that the resulting notion of filtering order reveals conceptually distinct, albeit complementary, features of the controlled dynamics as compared to the order of error cancellation, traditionally defined in the Magnus sense. Examples and implications are discussed.

quant-ph↗