arXiv subjects

Gabriele Oligeri

Publications and source records attributed to Gabriele Oligeri.

At least 19 recordsLinked to original sources

arXiv2026

Where You Tap Matters: A Probe-and-Model Benchmark for Open-Set RF Fingerprinting

Radio Frequency Fingerprint Identification (RFFI) enables transmitter identification at the physical layer by learning device-specific impairments from received signals, yet the literature is inconsistent about where in the receiver chain those samples should be collected. Since distinct transformations are applied to the signal by the different receiver operations, i.e., carrier recovery, gain normalization, pulse shaping, and timing recovery, they can either tighten within-transmitter variability or suppress the features RFFI requires for classification. We present a systematic real-world evaluation of open-set, reconstruction-error RFFI using data collected at five probe points along a standard BPSK receiver chain. Our results show that RFFI is strongly probe-dependent: timing recovery and, to a lesser extent, carrier recovery enable low false-acceptance operation with limited in-distribution-out-of-distribution overlap, whereas other stages often require a false-acceptance ratio above 0.1 to achieve a true-acceptance ratio of 0.9. To test the validity of our findings across model selection, we benchmark several LLM-designed autoencoders using a controlled pipeline that holds preprocessing and MSE scoring fixed. These architectures confirm that RFFI is probe-dependent. Moreover, they do not outperform the baseline at the chosen operating point and typically increase training time. Overall, probe selection dominates reconstruction-based open-set RFFI performance, more than the autoencoder complexity.

cs.CR↗

arXiv2026

The Chronicles of Radio Frequency Fingerprinting

Radio Frequency Fingerprinting (RFF) has evolved from an early idea for radar emitter identification into a broad research field for wireless device identification and spectrum monitoring for security. Rather than presenting a conventional literature survey, this work provides a critical historical analysis of RFF organized around the field's major conceptual paradigm shifts from 1993 to 2026. We discuss the evolution of RFF across its fundamental methodological phases, beginning with early transient-based approaches, in which transmitter turn-on behavior, unintentional modulation, and hardware nonlinearities were treated as the primary fingerprint sources. We then examine the transition to digital communications, during which attention shifted to steady-state impairments and to engineered features extracted from signals. Next, we discuss the Machine Learning period, which standardized the RFF workflow around feature extraction, dimensionality reduction, and supervised classification, followed by the Deep Learning period, in which representation learning from raw IQ samples significantly improved performance and expanded the application space. Beyond a chronological list of methods and best practices, this paper critically examines the changing assumptions and persistent limitations that have driven these transitions. We highlight the central challenges that continue to shape the field, including channel dependence, receiver sensitivity, limited dataset realism, poor cross-domain generalization, open-set recognition, and adversarial robustness. By organizing more than three decades of work into a coherent narrative, this paper clarifies the evolution of RFF, identifies persistent limitations, and outlines the key research directions required to move the field toward dependable real-world adoption.

cs.CR↗

arXiv2025

Weak-Jamming Detection in IEEE 802.11 Networks: Techniques, Scenarios and Mobility

State-of-the-art solutions detect jamming attacks ex-post, i.e., only when jamming has already disrupted the wireless communication link. In many scenarios, e.g., mobile networks or static deployments distributed over a large geographical area, it is often desired to detect jamming at the early stage, when it affects the communication link enough to be detected but not sufficiently to disrupt it (detection of weak jamming signals). Under such assumptions, devices can enhance situational awareness and promptly apply mitigation, e.g., moving away from the jammed area in mobile scenarios or changing communication frequency in static deployments, before jamming fully disrupts the communication link. Although some contributions recently demonstrated the feasibility of detecting low-power and weak jamming signals, they make simplistic assumptions far from real-world deployments. Given the current state of the art, no evidence exists that detection of weak jamming can be considered with real-world communication technologies. In this paper, we provide and comprehensively analyze new general-purpose strategies for detecting weak jamming signals, compatible by design with one of the most relevant communication technologies used by commercial-off-the-shelf devices, i.e., IEEE 802.11. We describe two operational modes: (i) binary classification via Convolutional Neural Networks and (ii) one-class classification via Sparse Autoencoders. We evaluate and compare the proposed approaches with the current state-of-the-art using data collected through an extensive real-world experimental campaign in three relevant environments. At the same time, we made the dataset available to the public. Our results demonstrate that detecting weak jamming signals is feasible in all considered real-world environments, and we provide an in-depth analysis considering different techniques, scenarios, and mobility patterns.

cs.CR↗

arXiv2025

LLMs Have Rhythm: Fingerprinting Large Language Models Using Inter-Token Times and Network Traffic Analysis

As Large Language Models (LLMs) become increasingly integrated into many technological ecosystems across various domains and industries, identifying which model is deployed or being interacted with is critical for the security and trustworthiness of the systems. Current verification methods typically rely on analyzing the generated output to determine the source model. However, these techniques are susceptible to adversarial attacks, operate in a post-hoc manner, and may require access to the model weights to inject a verifiable fingerprint. In this paper, we propose a novel passive and non-invasive fingerprinting technique that operates in real-time and remains effective even under encrypted network traffic conditions. Our method leverages the intrinsic autoregressive generation nature of language models, which generate text one token at a time based on all previously generated tokens, creating a unique temporal pattern like a rhythm or heartbeat that persists even when the output is streamed over a network. We find that measuring the Inter-Token Times (ITTs)-time intervals between consecutive tokens-can identify different language models with high accuracy. We develop a Deep Learning (DL) pipeline to capture these timing patterns using network traffic analysis and evaluate it on 16 Small Language Models (SLMs) and 10 proprietary LLMs across different deployment scenarios, including local host machine (GPU/CPU), Local Area Network (LAN), Remote Network, and Virtual Private Network (VPN). The experimental results confirm that our proposed technique is effective and maintains high accuracy even when tested in different network conditions. This work opens a new avenue for model identification in real-world scenarios and contributes to more secure and trustworthy language model deployment.

cs.CR↗

arXiv2025

Cyber Spectrum Intelligence: Security Applications, Challenges and Road Ahead

Cyber Spectrum Intelligence (SpecInt) is emerging as a concept that extends beyond basic {\em spectrum sensing} and {\em signal intelligence} to encompass a broader set of capabilities and technologies aimed at monitoring the use of the radio spectrum and extracting information. SpecInt merges traditional spectrum sensing techniques with Artificial Intelligence (AI) and parallel processing to enhance the ability to extract and correlate simultaneous events occurring on various frequencies, allowing for a new wave of intelligence applications. This paper provides an overview of the emerging SpecInt research area, characterizing the system architecture and the most relevant applications for cyber-physical security. We identify five subcategories of spectrum intelligence for cyber-physical security, encompassing Device Intelligence, Channel Intelligence, Location Intelligence, Communication Intelligence, and Ambient Intelligence. We also provide preliminary results based on an experimental testbed showing the viability, feasibility, and potential of this emerging application area. Finally, we point out current research challenges and future directions paving the way for further research in this domain.

cs.CR↗

arXiv2024

Detection of Aerial Spoofing Attacks to LEO Satellite Systems via Deep Learning

Detecting spoofing attacks to Low-Earth-Orbit (LEO) satellite systems is a cornerstone to assessing the authenticity of the received information and guaranteeing robust service delivery in several application domains. The solutions available today for spoofing detection either rely on additional communication systems, receivers, and antennas, or require mobile deployments. Detection systems working at the Physical (PHY) layer of the satellite communication link also require time-consuming and energy-hungry training processes on all satellites of the constellation, and rely on the availability of spoofed data, which are often challenging to collect. Moreover, none of such contributions investigate the feasibility of aerial spoofing attacks launched via drones operating at various altitudes. In this paper, we propose a new spoofing detection technique for LEO satellite constellation systems, applying anomaly detection on the received PHY signal via autoencoders. We validate our solution through an extensive measurement campaign involving the deployment of an actual spoofer (Software-Defined Radio) installed on a drone and injecting rogue IRIDIUM messages while flying at different altitudes with various movement patterns. Our results demonstrate that the proposed technique can reliably detect LEO spoofing attacks launched at different altitudes, while state-of-the-art competing approaches simply fail. We also release the collected data as open source, fostering further research on satellite security.

cs.CR↗

arXiv2024

HidePrint: Protecting Device Anonymity by Obscuring Radio Fingerprints

Radio Frequency Fingerprinting (RFF) techniques allow a receiver to authenticate a transmitter by analyzing the physical layer of the radio spectrum. Although the vast majority of scientific contributions focus on improving the performance of RFF considering different parameters and scenarios, in this work, we consider RFF as an attack vector to identify a target device in the radio spectrum. \\ We propose, implement, and evaluate {\em HidePrint}, a solution to prevent identification through RFF without affecting the quality of the communication link between the transmitter and the receiver. {\em HidePrint} hides the transmitter's fingerprint against an illegitimate eavesdropper through the injection of controlled noise into the transmitted signal. We evaluate our solution against various state-of-the-art RFF techniques, considering several adversarial models, data from real-world communication links (wired and wireless), and protocol configurations. Our results show that the injection of a Gaussian noise pattern with a normalized standard deviation of (at least) 0.02 prevents device fingerprinting in all the considered scenarios, while affecting the Signal-to-Noise Ratio (SNR) of the received signal by only 0.1 dB. Moreover, we introduce {\em selective radio fingerprint disclosure}, a new technique that allows the transmitter to disclose the radio fingerprint to only a subset of intended receivers.

cs.CR↗

arXiv2024

On the Reliability of Radio Frequency Fingerprinting

Radio Frequency Fingerprinting (RFF) offers a unique method for identifying devices at the physical (PHY) layer based on their RF emissions due to intrinsic hardware differences. Nevertheless, RFF techniques depend on the ability to extract information from the PHY layer of the radio spectrum by resorting to Software Defined Radios (SDR). Previous works have highlighted the so-called ``Day-After-Tomorrow'' effect, i.e., an intrinsic issue of SDRs leading to a fingerprint mutation following a radio power cycle. In this work, we extend such a study by demonstrating that fingerprint mutations appear every time a new FPGA image is reloaded, i.e., when the SDR initiates a new communication. In this context, we provide an in-depth analysis of the reliability of RFF over multiple FPGA image reloading operations, highlighting its ephemeral and mutational nature. We introduce a methodology for abstracting fingerprint mutations into a graph and provide a theoretical framework for assessing fingerprint reliability. Our results show that the common assumption of considering the RF fingerprint as unique and always persistent is incorrect. By combining real-world measurements, high-performance SDRs, and state-of-the-art deep learning techniques, we experimentally demonstrate that radio devices feature multiple fingerprints that can be clustered according to shared features. Moreover, we show that the RF fingerprint is a time-independent probabilistic phenomenon, which requires the collection of multiple samples to achieve the necessary reliability.

cs.CR↗

arXiv2024

Preventing Radio Fingerprinting through Low-Power Jamming

Radio Frequency fingerprinting enables a passive receiver to recognize and authenticate a transmitter without the need for cryptographic tools. Authentication is achieved by isolating specific features of the transmitted signal that are unique to the transmitter's hardware. Much research has focused on improving the effectiveness and efficiency of radio frequency fingerprinting to maximize its performance in various scenarios and conditions, while little research examined how to protect devices from being subject to radio fingerprinting in the wild. In this paper, we explore a novel point of view. We examine the threat posed by radio frequency fingerprinting, which facilitates the unauthorized identification of wireless devices in the field by malicious entities. We also suggest a method to sanitize the transmitted signal of its fingerprint using a low-power jammer, deployed on purpose to improve devices' anonymity on the channel while still guaranteeing the link's quality of service. Our experimental results and subsequent analysis demonstrate that a low-power jammer can effectively block a malicious eavesdropper from identifying a device without affecting the quality of the wireless link, thereby restoring the privacy of the user when accessing the radio spectrum.

cs.CR↗

arXiv2023

Radio Frequency Fingerprinting via Deep Learning: Challenges and Opportunities

Radio Frequency Fingerprinting (RFF) techniques promise to authenticate wireless devices at the physical layer based on inherent hardware imperfections introduced during manufacturing. Such RF transmitter imperfections are reflected into over-the-air signals, allowing receivers to accurately identify the RF transmitting source. Recent advances in Machine Learning, particularly in Deep Learning (DL), have improved the ability of RFF systems to extract and learn complex features that make up the device-specific fingerprint. However, integrating DL techniques with RFF and operating the system in real-world scenarios presents numerous challenges, originating from the embedded systems and the DL research domains. This paper systematically identifies and analyzes the essential considerations and challenges encountered in the creation of DL-based RFF systems across their typical development life-cycle, which include (i) data collection and preprocessing, (ii) training, and finally, (iii) deployment. Our investigation provides a comprehensive overview of the current open problems that prevent real deployment of DL-based RFF systems while also discussing promising research opportunities to enhance the overall accuracy, robustness, and privacy of these systems.

cs.CR↗

arXiv2023

Watch Nearby! Privacy Analysis of the People Nearby Service of Telegram

People Nearby is a service offered by Telegram that allows a user to discover other Telegram users, based only on geographical proximity. Nearby users are reported with a rough estimate of their distance from the position of the reference user, allowing Telegram to claim location privacy In this paper, we systematically analyze the location privacy provided by Telegram to users of the People Nearby service. Through an extensive measurement campaign run by spoofing the user's location all over the world, we reverse-engineer the algorithm adopted by People Nearby to compute distances between users. Although the service protects against precise user localization, we demonstrate that location privacy is always lower than the one declared by Telegram of 500 meters. Specifically, we discover that location privacy is a function of the geographical position of the user. Indeed, the radius of the location privacy area (localization error) spans between 400 meters (close to the equator) and 128 meters (close to the poles), with a difference of up to 75% (worst case) compared to what Telegram declares. After our responsible disclosure, Telegram updated the FAQ associated with the service. Finally, we provide some solutions and countermeasures that Telegram can implement to improve location privacy. In general, the reported findings highlight the significant privacy risks associated with using People Nearby service.

cs.CR↗

arXiv2023

MITRE ATT&CK: State of the Art and Way Forward

MITRE ATT&CK is a comprehensive framework of adversary tactics, techniques and procedures based on real-world observations. It has been used as a foundation for threat modelling in different sectors, such as government, academia and industry. To the best of our knowledge, no previous work has been devoted to the comprehensive collection, study and investigation of the current state of the art leveraging the MITRE ATT&CK framework. We select and inspect more than fifty major research contributions, while conducting a detailed analysis of their methodology and objectives in relation to the MITRE ATT&CK framework. We provide a categorization of the identified papers according to different criteria such as use cases, application scenarios, adopted methodologies and the use of additional data. Finally, we discuss open issues and future research directions involving not only the MITRE ATT&CK framework but also the fields of risk analysis and cyber-threat intelligence at large.

cs.CR↗

arXiv2023

False Data Injection Attacks in Smart Grids: State of the Art and Way Forward

In the recent years cyberattacks to smart grids are becoming more frequent Among the many malicious activities that can be launched against smart grids False Data Injection FDI attacks have raised significant concerns from both academia and industry FDI attacks can affect the internal state estimation processcritical for smart grid monitoring and controlthus being able to bypass conventional Bad Data Detection BDD methods Hence prompt detection and precise localization of FDI attacks is becomming of paramount importance to ensure smart grids security and safety Several papers recently started to study and analyze this topic from different perspectives and address existing challenges Datadriven techniques and mathematical modelings are the major ingredients of the proposed approaches The primary objective of this work is to provide a systematic review and insights into FDI attacks joint detection and localization approaches considering that other surveys mainly concentrated on the detection aspects without detailed coverage of localization aspects For this purpose we select and inspect more than forty major research contributions while conducting a detailed analysis of their methodology and objectives in relation to the FDI attacks detection and localization We provide our key findings of the identified papers according to different criteria such as employed FDI attacks localization techniques utilized evaluation scenarios investigated FDI attack types application scenarios adopted methodologies and the use of additional data Finally we discuss open issues and future research directions

cs.CR↗

arXiv2023

Jamming Detection in Low-BER Mobile Indoor Scenarios via Deep Learning

The current state of the art on jamming detection relies on link-layer metrics. A few examples are the bit-error-rate (BER), the packet delivery ratio, the throughput, and the increase in the signal-to-noise ratio (SNR). As a result, these techniques can only detect jamming \emph{ex-post}, i.e., once the attack has already taken down the communication link. These solutions are unfit for mobile devices, e.g., drones, which might lose the connection to the remote controller, being unable to predict the attack. Our solution is rooted in the idea that a drone unknowingly flying toward a jammed area is experiencing an increasing effect of the jamming, e.g., in terms of BER and SNR. Therefore, drones might use the above-mentioned phenomenon to detect jamming before the decrease of the BER and the increase of the SNR completely disrupt the communication link. Such an approach would allow drones and their pilots to make informed decisions and maintain complete control of navigation, enhancing security and safety. This paper proposes Bloodhound+, a solution for jamming detection on mobile devices in low-BER regimes. Our approach analyzes raw physical-layer information (I-Q samples) acquired from the wireless channel. We assemble this information into grayscale images and use sparse autoencoders to detect image anomalies caused by jamming attacks. To test our solution against a wide set of configurations, we acquired a large dataset of indoor measurements using multiple hardware, jamming strategies, and communication parameters. Our results indicate that Bloodhound+ can detect indoor jamming up to 20 meters from the jamming source at the minimum available relative jamming power, with a minimum accuracy of 99.7\%. Our solution is also robust to various sampling rates adopted by the jammer and to the type of signal used for jamming.

cs.CR↗

arXiv2023

The Day-After-Tomorrow: On the Performance of Radio Fingerprinting over Time

The performance of Radio Frequency (RF) Fingerprinting (RFF) techniques is negatively impacted when the training data is not temporally close to the testing data. This can limit the practical implementation of physical-layer authentication solutions. To circumvent this problem, current solutions involve collecting training and testing datasets at close time intervals -- this being detrimental to the real-life deployment of any physical-layer authentication solution. We refer to this issue as the Day-After-Tomorrow (DAT) effect, being widely attributed to the temporal variability of the wireless channel, which masks the physical-layer features of the transmitter, thus impairing the fingerprinting process. In this work, we investigate the DAT effect shedding light on its root causes. Our results refute previous knowledge by demonstrating that the DAT effect is not solely caused by the variability of the wireless channel. Instead, we prove that it is also due to the power cycling of the radios, i.e., the turning off and on of the radios between the collection of training and testing data. We show that state-of-the-art RFF solutions double their performance when the devices under test are not power cycled, i.e., the accuracy increases from about 0.5 to about 1 in a controlled scenario. Finally, we show how to mitigate the DAT effect in real-world scenarios, through pre-processing of the I-Q samples. Our experimental results show a significant improvement in accuracy, from approximately 0.45 to 0.85. Additionally, we reduce the variance of the results, making the overall performance more reliable.

cs.CR↗

arXiv2020

KaFHCa: Key-establishment via Frequency Hopping Collisions

The massive deployment of IoT devices being utilized by home automation, industrial and military scenarios demands for high security and privacy standards to be achieved through innovative solutions. This paper proposes KaFHCa, a crypto-less protocol that generates shared secret keys by combining random frequency hopping collisions and source indistinguishability independently of the radio channel status. While other solutions tie the secret bit rate generation to the current radio channel conditions, thus becoming unpractical in static environments, KaFHCa guarantees almost the same secret bitrate independently of the channel conditions. KaFHCa generates shared secrets through random collisions of the transmitter and the receiver in the radio spectrum, and leverages on the fading phenomena to achieve source indistinguishability, thus preventing unauthorized eavesdroppers from inferring the key. The proposed solution is (almost) independent of the adversary position, works under the conservative assumption of channel fading ({\sigma} = 8dB), and is capable of generating a secret key of 128 bits with less than 564 transmissions.

cs.CR↗

arXiv2020

PAST-AI: Physical-layer Authentication of Satellite Transmitters via Deep Learning

Physical-layer security is regaining traction in the research community, due to the performance boost introduced by deep learning classification algorithms. This is particularly true for sender authentication in wireless communications via radio fingerprinting. However, previous research efforts mainly focused on terrestrial wireless devices while, to the best of our knowledge, none of the previous work took into consideration satellite transmitters. The satellite scenario is generally challenging because, among others, satellite radio transducers feature non-standard electronics (usually aged and specifically designed for harsh conditions). Moreover, the fingerprinting task is specifically difficult for Low-Earth Orbit (LEO) satellites (like the ones we focus in this paper) since they orbit at about 800Km from the Earth, at a speed of around 25,000Km/h, thus making the receiver experiencing a down-link with unique attenuation and fading characteristics. In this paper, we propose PAST-AI, a methodology tailored to authenticate LEO satellites through fingerprinting of their IQ samples, using advanced AI solutions. Our methodology is tested on real data -- more than 100M I/Q samples -- collected from an extensive measurements campaign on the IRIDIUM LEO satellites constellation, lasting 589 hours. Results are striking: we prove that Convolutional Neural Networks (CNN) and autoencoders (if properly calibrated) can be successfully adopted to authenticate the satellite transducers, with an accuracy spanning between 0.8 and 1, depending on prior assumptions. The proposed methodology, the achieved results, and the provided insights, other than being interesting on their own, when associated to the dataset that we made publicly available, will also pave the way for future research in the area.

cs.CR↗

arXiv2020

The Dark (and Bright) Side of IoT: Attacks and Countermeasures for Identifying Smart Home Devices and Services

We present a new machine learning-based attack that exploits network patterns to detect the presence of smart IoT devices and running services in the WiFi radio spectrum. We perform an extensive measurement campaign of data collection, and we build up a model describing the traffic patterns characterizing three popular IoT smart home devices, i.e., Google Nest Mini, Amazon Echo, and Amazon Echo Dot. We prove that it is possible to detect and identify with overwhelming probability their presence and the services running by the aforementioned devices in a crowded WiFi scenario. This work proves that standard encryption techniques alone are not sufficient to protect the privacy of the end-user, since the network traffic itself exposes the presence of both the device and the associated service. While more work is required to prevent non-trusted third parties to detect and identify the user's devices, we introduce Eclipse, a technique to mitigate these types of attacks, which reshapes the traffic making the identification of the devices and the associated services similar to the random classification baseline.

cs.CR↗