arXiv subjects

Gabriele Gradoni

Publications and source records attributed to Gabriele Gradoni.

At least 19 recordsLinked to original sources

arXiv2026

Non-Uniform Antenna Array Design with Large Inter-Element Spacing for Massive MIMO

In massive multiple-input multiple-output (MIMO) systems, uniform arrays are typically configured with inter-element spacing no greater than half a wavelength to avoid grating lobes and spatial aliasing. However, many emerging fifth- and sixth-generation (5G/6G) applications rely on distributed arrays whose inter-element spacing far exceeds half a wavelength. In this paper, we propose an electromagnetic mutual-information-theoretic (EMIT)-guided non-uniform array (NUA) design with large inter-element spacing for massive MIMO systems to address the grating lobes and spatial aliasing artifacts, and in the meantime, to reduce the hardware cost and energy consumption. We start by developing a multipath channel model for non-uniform planar arrays, and analyze the resulting channel characteristics in terms of inter-user interference, aperture efficiency, favorable propagation and channel capacity for the proposed typical NUA patterns. The model is further extended to wideband scenarios, where NUAs demonstrate improved robustness against beam squint due to their more compact element distribution. In addition, we introduce an EMIT approach to NUA design, which links the spatial sampling pattern of an antenna array to the capacity of the resulting MIMO channel. This gives rise to two complementary shaping strategies, amplitude tapering and geometric shaping, and their joint optimization. Numerical results demonstrate that the proposed NUAs significantly outperform conventional uniform arrays in aperture efficiency, channel orthogonality, beam squint mitigation, capacity, and error rate performance.

eess.SP↗

arXiv2026

Topological Winding Readout of an Emergent Page-Wootters Clock

The Page--Wootters construction gives time a Hilbert space, representing it as an internal degree of freedom whose readings the rest of the system evolves with respect to. We ask whether such a clock degree of freedom can carry a topological invariant, and we propose a photonic architecture in which it does and in which the invariant can be measured. Signal--idler pairs from spontaneous four-wave mixing in a coupled microring array supply the clock--system partition, with the idler occupying a Rice--Mele band whose staggered coupling and detuning are cycled adiabatically around a gap-closing point. One cycle acts on that band as a rigid translation by $C$ unit cells, times a geometric phase periodic in the crystal momentum, times a dynamical phase, an identity exact in the adiabatic limit and independent of the state on which it acts. The readout targets the winding of that geometric phase across the Brillouin zone. Reversing the traversal of the pump loop cancels the dynamical phase and isolates twice the geometric phase in a two-photon coincidence fringe, while energy anticorrelation lets a filter on the signal scan the clock momentum without touching the clock and supplies the phase reference relationally, in place of an external optical reference. The estimate is protected on two independent levels, by the gap against smooth deformation and by the digital character of the unwrapping against noise below a threshold. A parameter budget anchored to thin-film lithium niobate places the requirements within reach at a conservative operating point.

quant-ph↗

arXiv2026

Multi-Functional RIS-enabled Radar and Communication Coexistence: Channel Modeling and a Sub-6 GHz Indoor Measurement Campaign

In this work, we analyze a multi-functional reconfigurable intelligent surface (MF-RIS)-enabled radar and communication coexistence (RCC) system, detailing the key aspects of its phase synthesis codebook generation and the implemented localization algorithm for real-time user tracking based on density-based spatial clustering of applications with noise (DBSCAN), which features a Kalman filter for the prediction of user mobility. We derived a 3GPP-compatible radar cross-section (RCS) and re-radiation pattern-based channel model for the described MF-RIS system, supplementing it with channel measurements. We obtained large and small-scale characteristics, including path loss, shadow fading, Rician K-factor, cluster powers, and RMS delay spread. The study finds that Sub-6 GHz indoor propagation is largely free of blind spots, even with a blocked line-of-sight (LoS) path. Therefore, the proposed channel model includes non-line-of-sight (NLoS) paths, including the ones created by the MF-RIS. We also performed an experimental evaluation of the channel throughput in a fifth generation (5G) new radio (NR) single user multiple-input-multiple-output (SU-MIMO) system, reporting a 74\% reduction in throughput variance and a 12.5\% sum-rate improvement within the MF-RIS near-field compared to the no-RIS setup. This result shows that the MF-RIS can minimize delay spread and increase the coherence bandwidth by creating virtual-LoS (vLoS) path for the moving user, thereby effectively hardening wireless MIMO channels.

eess.SP↗

arXiv2025

Experimental Sensitivity Enhancement of a Quantum Rydberg Atom-Based RF Receiver with a Metamaterial GRIN Lens

We experimentally demonstrate enhanced sensitivity of an atom-based Rydberg radio frequency (RF) receiver integrated with a gradient refractive index (GRIN) Luneburg-type metamaterial lens. By analyzing the electromagnetically induced transparency (EIT) effect in Cesium vapor, we compare receiver performance with and without the GRIN lens under a 2.2~GHz and a 3.6~GHz far-field excitation. Our measurements reveal a significant amplification of the EIT window when the lens is introduced, consistent with the theoretical prediction that the local E-field enhancement at the vapor cell reduces the minimum detectable electric field and improves the microwave electric field measurement sensitivity of the Rydberg atom-based RF receiver over an ultrawide bandwidth of the lens. This experimental validation demonstrates the potential of metamaterial-enhanced quantum RF sensing for a wide range of applications, such as electromagnetic compatibility (EMC) testing, quantum radar, and wireless communication.

quant-ph↗

arXiv2025

Photon Splatting: A Physics-Guided Neural Surrogate for Real-Time Wireless Channel Prediction

We present Photon Splatting, a physics-guided neural surrogate model for real-time wireless channel prediction in complex environments. The proposed framework introduces surface-attached virtual sources, referred to as photons, which carry directional wave signatures informed by the scene geometry and transmitter configuration. At runtime, channel impulse responses (CIRs) are predicted by splatting these photons onto the angular domain of the receiver using a geodesic rasterizer. The model is trained to learn a physically grounded representation that maps transmitter-receiver configurations to full channel responses. Once trained, it generalizes to new transmitter positions, antenna beam patterns, and mobile receivers without requiring model retraining. We demonstrate the effectiveness of the framework through a series of experiments, from canonical 3D scenes to a complex indoor cafe with 1,000 receivers. Results show 30 millisecond-level inference latency and accurate CIR predictions across a wide range of configurations. The approach supports real-time adaptability and interpretability, making it a promising candidate for wireless digital twin platforms and future 6G network planning.

cs.LG↗

arXiv2025

Terahertz Chip-Scale Meta-Networks with LSPR Routing: A Theoretical Framework

Efficient chip-scale interconnects are essential for modern microelectronic-photonic systems, supporting high bandwidth and low-latency processing. Traditional wired links face high resistivity and latency, while millimeter-wave wireless solutions suffer from bandwidth congestion and interference. Terahertz (THz) plasmonic communication, based on surface plasmon polaritons (SPPs), offers high data rates and broad bandwidth, and is compatible with nanophotonic platforms. This work introduces a Binary Field-Driven Meta-Routing Method supported by a semi-analytical framework that models the tunable interaction between THz plasmonic phenomena and graphene's electromagnetic properties. By modulating graphene's impedance, the method enables dynamic coupling and routing of localized surface plasmon resonances (LSPRs) across a meta-network, facilitating real-time beam steering in chip-scale systems. Combining analytical conductivity models, coupled-mode theory, and algorithmic control, the approach enables predictive configuration of LSPR-based steering in reconfigurable graphene metasurfaces. Four meta-pixel antenna configurations Y-MetaRouter, MetaSwitcher, Penta-MetaEmitter, and CP-MetaCore are designed to support unidirectional radiation, bi-directional steering, frequency-driven transitions, and circular polarization, respectively. Chemical potential modulation creates reconfigurable LSPR pathways and virtual SPP channels. A Coupled-Mode Theory for Field-Driven LSPR Meta-Networks is proposed to model current distributions and predict far-field characteristics. Results show strong agreement between theory and full-wave simulations. A point-to-point meta-wireless link is analyzed, demonstrating scalability for low-latency, high-performance THz communication in WiNoC and chiplet applications. System-level metrics confirm feasibility for space-constrained, high-speed interconnects.

physics.optics↗

arXiv2025

Quantum Enhanced Entropy Pool for Cryptographic Applications and Proofs

This paper investigates the integration of quantum randomness into Verifiable Random Functions (VRFs) using the Ed25519 elliptic curve to strengthen cryptographic security. By replacing traditional pseudorandom number generators with quantum entropy sources, we assess the impact on key security and performance metrics, including execution time, and resource usage. Our approach simulates a modified VRF setup where initialization keys are derived from a quantum random number generator source (QRNG). The results show that while QRNGs could enhance the unpredictability and verifiability of VRFs, their incorporation introduces challenges related to temporal and computational overhead. This study provides valuable insights into the trade-offs of leveraging quantum randomness in API-driven cryptographic systems and offers a potential path toward more secure and efficient protocol design. The QRNG-based system shows increased (key generation times from 50 to 400+ microseconds, verification times from 500 to 3500 microseconds) and higher CPU usage (17% to 30%) compared to the more consistent performance of a Go-based VRF (key generation times below 200 microseconds, verification times under 2000 microseconds, CPU usage below 10%), highlighting trade-offs in computational efficiency and resource demands.

cs.CR↗

arXiv2025

Graph-CNNs for RF Imaging: Learning the Electric Field Integral Equations

Radio-Frequency (RF) imaging concerns the digital recreation of the surfaces of scene objects based on the scattered field at distributed receivers. To solve this difficult inverse scattering problems, data-driven methods are often employed that extract patterns from similar training examples, while offering minimal latency. In this paper, we first provide an approximate yet fast electromagnetic model, which is based on the electric field integral equations, for data generation, and subsequently propose a Deep Neural Network (DNN) architecture to learn the corresponding inverse model. A graph-attention backbone allows for the system geometry to be passed to the DNN, where residual convolutional layers extract features about the objects, while a UNet head performs the final image reconstruction. Our quantitative and qualitative evaluations on two synthetic data sets of different characteristics showcase the performance gains of thee proposed advanced architecture and its relative resilience to signal noise levels and various reception configurations.

cs.LG↗

arXiv2025

Near-Field Localization with Physics-Compliant Electromagnetic Model: Algorithms and Model Mismatch Analysis

Accurate signal localization is critical for Internet of Things applications, but precise propagation models are often unavailable due to uncontrollable factors. Simplified models such as planar and spherical wavefront approximations are widely used but can cause model mismatches that reduce accuracy. To address this, we propose an expected likelihood ratio framework for model mismatch analysis and online model selection without requiring knowledge of the true propagation model. The framework leverages the scenario independent distribution of the likelihood ratio of the actual covariance matrix, enabling the detection of mismatches and outliers by comparing given models to a predefined distribution. When an accurate electromagnetic model is unavailable, the robustness of the framework is analyzed using data generated from a precise electromagnetic model and simplified models within positioning algorithms. Validation in direct localization and reconfigurable intelligent surface assisted scenarios demonstrates the ability to improve localization accuracy and reliably detect model mismatches in diverse Internet of Things environments.

eess.SP↗

arXiv2025

A Corrugated All-Metal Vivaldi Antenna for 5G Phased Array Applications

In this paper, a corrugated Vivaldi phased array antenna in the 28 GHz frequency band is proposed for 5G communication applications. The presented configuration features an all-metal antipodal antenna structure with a broad bandwidth ranging from 26 to 30 GHz and beam steering capabilities from -30 to +30 degrees. The proposed antenna consists of a 4x4 array configuration, where each element has dimensions of 6.46x6.46x14.25 mm, resulting in an overall antenna structure with dimensions of 25.84x25.84x14.25 mm. The corrugation method is applied to minimize surface currents, resulting in a reduction in interelement mutual couplings. Therefore, the return loss in the array structure for central elements is decreased, and the antenna gain and radiation efficiency are improved. Moreover, the improved radiation efficiency allows for higher power transmission and reception from an antenna, resulting in potentially higher data rates and better performance.

eess.SP↗

arXiv2024

Physics-Compliant Modeling and Scaling Laws of Multi-RIS Aided MIMO Systems

Reconfigurable intelligent surface (RIS) enables the control of wireless channels to improve coverage. To further extend coverage, multi-RIS aided systems have been explored, where multiple RISs steer the signal via a multi-hop path. However, deriving a physics-compliant channel model for multi-RIS aided systems is still an open problem. In this study, we fill this gap by modeling multi-RIS aided systems through multiport network theory, and deriving a channel model accounting for impedance mismatch, mutual coupling, and structural scattering. The derived physics-compliant model differs from the model widely used in literature, which omits the RIS structural scattering. To quantify this difference, we derive the channel gain scaling laws of the two models under line-of-sight (LoS) and multipath channels. Theoretical insights, validated by numerical results, show an important discrepancy between the physics-compliant and the widely used models, increasing with the number of RISs and multipath richness. In a multi-hop system aided by four 128-element RISs with multipath channels, optimizing the RISs using the widely used model and applying their solutions to the physics-compliant model achieves only 7% of the maximum channel gain. This highlights how severely mismatched channel models can be, calling for more accurate models in communication theory.

cs.IT↗

arXiv2024

Physics-Compliant Modeling and Scaling Laws of Multi-RIS Aided Systems

Reconfigurable intelligent surface (RIS) is a revolutionary technology enabling the control of wireless channels and improving coverage in wireless networks. To further extend coverage, multi-RIS aided systems have been explored, where multiple RISs steer the signal toward the receiver via a multi-hop path. However, deriving a physics-compliant channel model for multi-RIS aided systems is still an open problem. In this study, we fill this gap by modeling multi-RIS aided systems through multiport network theory, and deriving the scaling law of the physics-compliant channel gain. The derived physics-compliant channel model differs from the widely used model, where the structural scattering of the RISs is neglected. Theoretical insights, validated by numerical results, show a significant discrepancy between the physics-compliant and the widely used models. This discrepancy increases with the number of RISs and decreases with the number of RIS elements, reaching 200% in a system with eight RISs with 128 elements each.

cs.IT↗

arXiv2024

An Overview of Electromagnetic Illusions: Empowering Smart Environments with Reconfigurable Metasurfaces

This study delves into the innovative landscape of metasurfaces, with a particular focus on their role in achieving EM illusion (EMI) a facet of paramount significance. The control of EM waves assumes a pivotal role in mitigating issues such as signal degradation, interference, and reduced communication range. Furthermore, the engineering of waves serves as a foundational element in achieving invisibility or minimized detectability. This survey unravels the theoretical underpinnings and practical designs of EMI coatings, which have been harnessed to develop functional metasurfaces. EMI, practically achieved through engineered coatings, confers a strategic advantage by either reducing the radar cross-section of objects or creating misleading footprints. In addition to illustrating the outstanding achievements in reconfigurable cloaking, this study culminates in the proposal of a novel approach, suggesting the emergence of EMI without the need for physically coating the device to conceal and thus proposing the concept of a smart EMI environment. This groundbreaking work opens a new way for engineers and researchers to unlock exotic and versatile designs that build on reconfigurable intelligent surfaces (RIS). Crucially the designs enabled by the proposed approach, present a wide array of applications, encompassing camouflaging, deceptive sensing, radar cognition control, and defence security, among others. In essence, this research stands as a beacon guiding the exploration of uncharted territories in wave control through smart EMI environments, with profound implications spanning basic academic research in RIS through advanced security technologies and communication systems.

eess.SP↗

arXiv2024

T3DRIS: Advancing Conformal RIS Design through In-depth Analysis of Mutual Coupling Effects

This paper presents a theoretical and mathematical framework for the design of a conformal reconfigurable intelligent surface (RIS) that adapts to non-planar geometries, which is a critical advancement for the deployment of RIS on non-planar and irregular surfaces as envisioned in smart radio environments. Previous research focused mainly on the optimization of RISs assuming a predetermined shape, while neglecting the intricate interplay between shape optimization, phase optimization, and mutual coupling effects. Our contribution, the T3DRIS framework, addresses this fundamental problem by integrating the configuration and shape optimization of RISs into a unified model and design framework, thus facilitating the application of RIS technology to a wider spectrum of environmental objects. The mathematical core of T3DRIS is rooted in optimizing the 3D deployment of the unit cells and tuning circuits, aiming at maximizing the communication performance. Through rigorous full-wave simulations and a comprehensive set of numerical analyses, we validate the proposed approach and demonstrate its superior performance and applicability over contemporary designs. This study-the first of its kind-paves the way for a new direction in RIS research, emphasizing the importance of a theoretical and mathematical perspective in tackling the challenges of conformal RISs.

cs.IT↗

arXiv2023

Experimental Investigation of 5G Base Station functionalities in Reverberation Chamber at Millimeter-Wave

The performance and functionalities of a commercial fifth generation base station are evaluated inside the reverberation chamber at the mmWave frequency range. The base station capability to operates in different propagation environment conditions reproduced by the reverberation chamber is investigated. Throughput, modulation code scheme and beamforming are analyzed for different real life scenarios both in uplink and downlink. Experimental results inform network operators in their evaluation of the base station operation: i) in many scenarios within a laboratory; ii) in the assessment of whether expected benefit justifies the additional costs in an operating actual network.

cs.NI↗

arXiv2023

Empirical Validation of the Impedance-Based RIS Channel Model in an Indoor Scattering Environment

Ensuring the precision of channel modeling plays a pivotal role in the development of wireless communication systems, and this requirement remains a persistent challenge within the realm of networks supported by Reconfigurable Intelligent Surfaces (RIS). Achieving a comprehensive and reliable understanding of channel behavior in RIS-aided networks is an ongoing and complex issue that demands further exploration. In this paper, we empirically validate a recently-proposed impedance-based RIS channel model that accounts for the mutual coupling at the antenna array and precisely models the presence of scattering objects within the environment as a discrete array of loaded dipoles. To this end, we exploit real-life channel measurements collected in an office environment to demonstrate the validity of such a model and its applicability in a practical scenario. Finally, we provide numerical results demonstrating that designing the RIS configuration based upon such model leads to superior performance as compared to reference schemes.

cs.IT↗

arXiv2023

Generalised Impedance Model of Wireless Links Assisted by Reconfigurable Intelligent Surfaces

We devise an end-to-end communication channel model that describes the performance of RIS-assisted MIMO wireless links. The model borrows the impedance (interaction) matrix formalism from the Method of Moments and provides a physics-based communication model. In configurations where the transmit and receive antenna arrays are distant from the RIS beyond a wavelength, a reduced model provides accurate results for arbitrary RIS unit cell geometry. Importantly, the simplified model configures as a cascaded channel transfer matrix whose mathematical structure is compliant with widely accepted, but less accurate, system level RIS models. A numerical validation of the communication model is presented for the design of binary RIS structures with scatterers of canonical geometry. Attained results are consistent with path-loss models: For obstructed line-of-sight between transmitter and receiver, the channel capacity of the (optimised) RIS-assisted link scales as $R^{-2}$, with $R$ RIS-receiver distance at fixed transmitter position. Our results shows that the applicability of communication models based on mutual impedance matrices is not restricted to canonical minimum scattering RIS unit cells.

cs.IT↗

arXiv2023

RIS-Enabled Smart Wireless Environments: Deployment Scenarios, Network Architecture, Bandwidth and Area of Influence

Reconfigurable Intelligent Surfaces (RISs) constitute the key enabler for programmable electromagnetic propagation environments, and are lately being considered as a candidate physical-layer technology for the demanding connectivity, reliability, localization, and sustainability requirements of next generation wireless networks. In this paper, we first present the deployment scenarios for RIS-enabled smart wireless environments that have been recently designed within the ongoing European Union Horizon 2020 RISE-6G project, as well as a network architecture integrating RISs with existing standardized interfaces. We identify various RIS deployment strategies and sketch the core architectural requirements in terms of RIS control and signaling, depending on the RIS hardware architectures and respective capabilities. Furthermore, we introduce and discuss, with the aid of simulations and reflectarray measurements, two novel metrics that emerge in the context of RIS-empowered wireless systems: the RIS bandwidth and area of influence. Their extensive investigation corroborates the need for careful deployment and planning of the RIS technology in future networks.

cs.IT↗