arXiv subjects

GP Benham

Publications and source records attributed to GP Benham.

15 recordsLinked to original sources

arXiv2026

A systematic evaluation of the Richards equation for predicting soil moisture in Irish grasslands

The Richards equation (RE) is widely used to model water flow in unsaturated soils, but its performance in persistently wet grassland systems remains uncertain. This is particularly relevant in Irish grasslands, where soils often remain close to saturation for extended periods and seasonal waterlogging is common. Here, we evaluate the RE against three soil moisture datasets from County Wexford, Ireland, spanning different locations, soil types, and observation periods. We show that the standard RE formulation systematically over-predicts soil moisture under prolonged near-saturated conditions. We find that this arises from the commonly used Feddes plant water uptake function, which suppresses water losses under anaerobic conditions, despite continued evaporation from near-saturated soils. To address this limitation, we introduce a simple modification that retains a small non-zero water loss rate in the anaerobic regime. The modified model produces substantially improved agreement with observations across all three datasets. These results provide a systematic evaluation of RE-based soil moisture modelling in Irish grasslands. More broadly, they identify an important limitation of conventional RE implementations in waterlogged environments and demonstrate a practical approach for improving soil moisture predictions in persistently wet soils.

physics.flu-dyn↗

arXiv2023

On wave-driven propulsion

A theory is presented for wave-driven propulsion of floating bodies driven into oscillation at the fluid interface. By coupling the equations of motion of the body to a quasi-potential flow model of the fluid, we derive expressions for the drift speed and propulsive thrust of the body which in turn are shown to be consistent with global momentum conservation. We explore the efficacy of our model in describing the motion of SurferBot [Rhee et al., Bioinspir. Biomim. 17 (5), 2022], demonstrating close agreement with the experimentally determined drift speed and oscillatory dynamics. The efficiency of wave-driven propulsion is then computed as a function of driving oscillation frequency and the forcing location, revealing optimal values for both of these parameters which await confirmation in experiments. A comparison to other modes of locomotion and applications of our model to competitive water-sports are discussed in conclusion.

physics.flu-dyn↗

arXiv2022

Anisotropy distorts the spreading of a fixed volume porous gravity current

We consider the release and subsequent gravity-driven spreading of a finite volume of fluid in an anisotropic porous medium bounded by an impermeable substrate. When the permeability in the vertical direction is much smaller than the horizontal direction, as is the case in many real geological reservoirs, this restricts the spread of the current to a very thin layer near the impermeable base. Using a combination of asymptotic analysis and finite difference computations of Darcy flow, we show that there exist two distinct flow regimes. At early times the bulk of the current descends slowly and uniformly, injecting fluid into thin finger-like regions near the base. At much later times the current transitions to the classical gravity-driven solution and continues to spread with a self-similar shape. One interesting consequence is that the swept volume of the current grows differently depending on the anisotropy of the medium. This has important consequences for managing contaminant spills, where it is important to minimise the contacted volume of the aquifer, or during geological CO$_2$ sequestration where a larger contacted volume results in more CO$_2$ being stored.

physics.flu-dyn↗

arXiv2022

The near-field shape and stability of a porous plume

When a fluid is injected into a porous medium saturated with an ambient fluid of a greater density, the injected fluid forms a plume that rises upwards due to buoyancy. In the near-field of the injection point the plume adjusts its speed to match the buoyancy velocity of the porous medium, either thinning or thickening to conserve mass. These adjustments are the dominant controls on the near-field plume shape, rather than mixing with the ambient fluid, which occurs over larger vertical distances. In this study, we focus on the plume behaviour in the near-field, demonstrating that for moderate injection rates the plume will reach a steady state, whereby it matches the buoyancy velocity over a few plume width-scales from the injection point. However, for very small injection rates an instability occurs in which the steady plume breaks apart due to the insurmountable density contrast with the surrounding fluid. The steady shape of the plume in the near-field only depends on a single dimensionless parameter, which is the ratio between the inlet velocity and the buoyancy velocity. A linear stability analysis is performed, indicating that for small velocity ratios an infinitesimal perturbation can be constructed that becomes unstable, whilst for moderate velocity ratios the shape is shown to be stable. Finally, we comment on the application of such flows to the context of CO$_2$ sequestration in porous geological reservoirs.

physics.flu-dyn↗

arXiv2022

Axisymmetric gravity currents in anisotropic porous media

We explore the motion of an axisymmetric gravity current in an anisotropic porous medium in which the horizontal permeability is larger than the vertical permeability. It is well known that the classical axisymmetric gravity current supplied by a constant point source of fluid has an unphysical singularity near the origin. We address this by considering a pressure-dominated region near the origin which allows for vertical flow from the source, such that the current remains of finite depth, whilst beyond this region the flow is gravity-dominated. At early times the inner pressure-driven region controls the spreading of the current, but at late times the inner region occupies a progressively smaller fraction of the current such that the radius increases as $\sim t^{3/7}$, while the depth near the origin increases approximately as $\sim t^{1/7}$. The presence of anisotropy highlights this phenomenon, since the vertical permeability maintains an effect on the flow at late times through the pressure-driven flow near the origin. Using these results we provide some quantitative insights into the dominant dynamics which control CO$_2$ migration through permeable aquifers, as occurs in the context of carbon capture and storage.

physics.flu-dyn↗

arXiv2022

Gunwale bobbing

It has been shown experimentally that small droplets, bouncing on a vibrated liquid bath, can "walk" across the surface due to their interaction with their own wave-field. Gunwale bobbing is a life-size instance of this phenomena in which a person standing on the gunwales of a canoe propels it by pumping it into oscillation with the legs. The canoe moves forward by surfing the resulting wave-field. After an initial transient, the canoe achieves a cruising velocity which satisfies a balance between the thrust generated from pushing downwards into the surface gradients of the wave-field and the resistance due to a combination of profile drag and wave drag. By superposing the linear wave theories of Havelock (1919) for steady cruising and of Helmholtz for an oscillating source, we demonstrate that such a balance can be sustained. We calculate the optimal parameter values to achieve maximum canoe velocity. We compare our theoretical result to accelerometer data taken from an enthusiastic gunwale bobber. We discuss the similarities and differences between gunwale bobbing and hydrodynamic quantum analogues, and possible applications to competitive sports.

physics.flu-dyn↗

arXiv2021

Two-phase gravity currents in layered porous media

We examine the effects of horizontally layered heterogeneities on the spreading of two-phase gravity currents in a porous medium, with application to numerous environmental flows, most notably geological carbon sequestration. Geological heterogeneities, which are omnipresent within all reservoirs, affect the large-scale propagation of such flows through the action of small-scale capillary forces, yet the relationship between these small and large scales is poorly understood. Here, we derive a simple upscaled model for a gravity current under an impermeable cap rock, which we use to investigate the effect of a wide range of heterogeneities on the macroscopic flow. By parameterising in terms of different types of archetypal layering, we assess the sensitivity of the gravity current to the distribution and magnitude of these heterogeneities. Furthermore, since field measurements of heterogeneities are often sparse or incomplete, we quantify how uncertainty in such measurements is manifest as uncertainty in the macroscale flow predictions. Finally we apply our model to the Sleipner case study in the North Sea, positing how heterogeneities may have played a role in the observed migration of CO2.

physics.flu-dyn↗

arXiv2020

Upscaling multiphase flow through heterogeneous porous media

Upscaling the effect of heterogeneities in porous media is crucial for macroscopic flow predictions, with widespread applications in energy and environmental settings. In this study, we derive expressions for the upscaled flow properties of a porous medium with a vertical heterogeneity, using a combination of asymptotic analysis and numerical simulations. Then, we use these upscaled expressions to describe the dynamic flooding of an aquifer, where the classic Buckley-Leverett formulation is modified to account for heterogeneities. In particular, we show that heterogeneities can modify flooding speeds significantly, and we discuss the implications of these results in the case of carbon dioxide sequestration.

physics.flu-dyn↗

arXiv2020

Hysteretic wave drag in shallow water

During motion from deep to shallow water, multiple equilibria may emerge, each with identical drag - a phenomenon that can be explained by a localised amplification of the wave drag near the shallow wave speed. The implication of this is the emergence of several previously unstudied bifurcation patterns and hysteresis routes. Here, we address these nonlinear dynamics by considering the quasi-steady motion of a body between deep and shallow water, where the depth is slowly varying. We survey several theoretical models for the drag, compare these against our tow-tank experimental measurements, and then use the validated theory to explore the bifurcation patterns using two parameters: the depth of motion and the forcing. In particular, using a case study of a lake with a sinusoidal depth profile, we illustrate that hysteresis effects can play a significant role on the speed of motion and journey time, presenting interesting implications for naval and racing applications.

physics.flu-dyn↗

arXiv2019

Predicting lift-off time when deep-frying potato dough snacks

When frying potato snacks, it is typically observed that the dough, which is submerged in hot oil, after some critical time increases its buoyancy and floats to the surface. The lift-off time is a useful metric in ensuring that the snacks are properly cooked. Here we propose a multiphase mathematical model for the frying of potato snacks, where water inside the dough is evaporated from both the top and bottom surfaces of the snack at two receding evaporation fronts. The vapour created at the top of the snack bubbles away to the surface, whereas the vapour released from the bottom surface forms a buoyant blanket layer. By asymptotic analysis, we show that the model simplifies to solving a one-dimensional Stefan problem in the snack coupled to a thin-film equation in the vapour blanket through a non-linear boundary condition. Using our mathematical model, we predict the change in the snack density as a function of time, and investigate how lift-off time depends on the different parameters of the problem.

physics.flu-dyn↗

arXiv2019

Brachistochrone on a Velodrome

The Brachistochrone problem, which describes the curve that carries a particle under gravity in a vertical plane from one height to another in the shortest time, is one of the most famous studies in classical physics. There is a similar problem in track cycling, where a cyclist aims to find the trajectory on the curved sloping surface of a velodrome that results in the minimum lap time. In this paper we extend the classical Brachistochrone problem to find the optimum cycling trajectory in a velodrome, treating the cyclist as an active particle. Starting with two canonical cases of cycling on a sloping plane and a cone, where analytical solutions are found, we then solve the problem numerically on the reconstructed surface of the velodrome in Montigny le Bretonneux, France. Finally, we discuss the parameters of the problem and the effects of fatigue.

physics.flu-dyn↗

arXiv2019

Wave drag on asymmetric bodies

An asymmetric body with a sharp leading edge and a rounded trailing edge produces a smaller wave disturbance moving forwards than backwards, and this is reflected in the wave drag coefficient. This experimental fact is not captured by Michell's theory for wave drag (Michell 1898). In this study, we use a tow-tank experiment to investigate the effects of asymmetry on wave drag, and show that these effects can be replicated by modifying Michell's theory to include the growth of a symmetry-breaking boundary layer. We show that asymmetry can have either a positive or a negative effect on drag, depending on the depth of motion and the Froude number.

physics.flu-dyn↗

arXiv2018

The effect of inner swirl on confined co-axial flow

We study the problem of mixing between core and annular flow in a pipe, examining the effect of a swirling core flow. Such flows are important across a range of applications, including jet pumps, combustion chambers and aerospace engineering. Previous studies show that swirl can increase shear layer growth rates and, in the case of confining walls, reduce flow separation. However, the effect of swirl on pressure loss in a confined flow is uncertain. To address this, we develop a simplified model that approximates the axial flow profile as a linear shear layer separating uniform-velocity core and annular streams. The azimuthal flow profile is approximated as a solid body rotation within the core region, and a parabolic mixing profile within the shear layer. This model shows good agreement with computational turbulence modelling, whilst its simplicity and low computational cost make it ideal for benchmark predictions and design purposes. Using this model, we confirm that a swirling core is useful for increasing shear layer growth rates, but find that it is detrimental to pressure recovery. This has important implications for the design of diffusers that incorporate swirling flows. We use the model to describe the slow recirculation region that can form along the pipe axis for sufficiently large swirl, by approximating it as a stagnant zone with zero velocity. The criteria for the development of such a region are established in terms of the pipe expansion angle and inflow velocity profile.

physics.flu-dyn↗

arXiv2017

Optimal control of diffuser shapes for confined turbulent shear flows

A model for the development of turbulent shear flows, created by non-uniform parallel flows in a confining channel, is used to identify the diffuser shape that maximises pressure recovery when the inflow is non-uniform. Wide diffuser angles tend to accentuate the non- uniform flow, causing poor pressure recovery. On the other hand, shallow diffuser angles create longer regions with large wall drag, which is also detrimental to pressure recovery. Thus, optimal diffuser shapes strike a balance between the two effects. We use a simple model which describes the evolution of an approximate flow profile and pressure in the diffuser. The model equations form the dynamics of an optimal control problem where the control is the diffuser channel shape. A numerical optimisation approach is used to solve the optimal control problem and we use analytical results to interpret the numerics in some limiting cases. The results of the optimisation are compared to calculations from computational fluid dynamics.

physics.flu-dyn↗

arXiv2017

Turbulent shear layers in confining channels

We present a simple model for the development of shear layers between parallel flows in confining channels. Such flows are important across a wide range of topics from diffusers, nozzles and ducts to urban air flow and geophysical fluid dynamics. The model approximates the flow in the shear layer as a linear profile separating uniform-velocity streams. Both the channel geometry and wall drag affect the development of the flow. The model shows good agreement with both particle-image-velocimetry experiments and computational turbulence modelling. The low computational cost of the model allows it to be used for design purposes, which we demonstrate by investigating optimal pressure recovery in diffusers with non-uniform inflow.

physics.flu-dyn↗