arXiv subjects

G. Raven

Publications and source records attributed to G. Raven.

7 recordsLinked to original sources

arXiv2019

Performance of a GridPix TPC readout based on the Timepix3 chip

With the ultimate goal of developing a pixel-based readout for a TPC at the ILC, a GridPix readout system consisting of one Timepix3 chip with an integrated amplification grid was embedded in a prototype detector. The performance was studied in a testbeam with 2.5 GeV electrons at the ELSA accelerator in Bonn. The error on the track position measurement both in the drift direction and in the readout plane is dominated by diffusion. Systematic uncertainties are limited to below 10 $\mu$m. The GridPix can detect single ionization electrons with high efficiency, which allows for energy loss measurements and particle identification. From a truncated sum, an energy loss (dE/dx) resolution of 4.1% is found for an effective track length of 1 m. Using the same type of chips, a Quad module was developed that can be tiled to cover a TPC readout plane at the ILC. Simulation studies show that a pixel readout can improve the momentum resolution of a TPC at the ILC by about 20%.

physics.ins-det↗

arXiv2018

Performance of a GridPix detector based on the Timepix3 chip

A GridPix readout for a TPC based on the Timepix3 chip is developed for future applications at a linear collider. The GridPix detector consists of a gaseous drift volume read out by a single Timepix3 chip with an integrated amplification grid. Its performance is studied in a test beam with 2.5 GeV electrons. The GridPix detector detects single ionization electrons with high efficiency. The Timepix3 chip allowed for high sample rates and time walk corrections. Diffusion is found to be the dominating error on the track position measurement both in the pixel plane and in the drift direction, and systematic distortions in the pixel plane are below 10 $\mu$m. Using a truncated sum, an energy loss (dE/dx) resolution of 4.1% is found for an effective track length of 1 m.

physics.ins-det↗

arXiv2016

Tesla : an application for real-time data analysis in High Energy Physics

Upgrades to the LHCb computing infrastructure in the first long shutdown of the LHC have allowed for high quality decay information to be calculated by the software trigger making a separate offline event reconstruction unnecessary. Furthermore, the storage space of the triggered candidate is an order of magnitude smaller than the entire raw event that would otherwise need to be persisted. Tesla, following the LHCb renowned physicist naming convention, is an application designed to process the information calculated by the trigger, with the resulting output used to directly perform physics measurements.

physics.ins-det↗

arXiv2013

Performance of the LHCb High Level Trigger in 2012

The trigger system of the LHCb experiment is discussed in this paper and its performance is evaluated on a dataset recorded during the 2012 run of the LHC. The main purpose of the LHCb trigger system is to separate heavy flavour signals from the light quark background. The trigger reduces the roughly 11MHz of bunch-bunch crossings with inelastic collisions to a rate of 5kHz, which is written to storage.

hep-ex↗

arXiv2012

The LHCb Trigger and its Performance in 2011

This paper presents the design of the LHCb trigger and its performance on data taken at the LHC in 2011. A principal goal of LHCb is to perform flavour physics measurements, and the trigger is designed to distinguish charm and beauty decays from the light quark background. Using a combination of lepton identification and measurements of the particles' transverse momenta the trigger selects particles originating from charm and beauty hadrons, which typically fly a finite distance before decaying. The trigger reduces the roughly 11\,MHz of bunch-bunch crossings that contain at least one inelastic $pp$ interaction to 3\,kHz. This reduction takes place in two stages; the first stage is implemented in hardware and the second stage is a software application that runs on a large computer farm. A data-driven method is used to evaluate the performance of the trigger on several charm and beauty decay modes.

hep-ex↗

arXiv2012

Application of vertex and mass constraints in track-based alignment

The software alignment of planar tracking detectors using samples of charged particle trajectories may lead to global detector distortions that affect vertex and momentum resolution. We present an alignment procedure that constrains such distortions by making use of samples of decay vertices reconstructed from two or more trajectories and putting constraints on their invariant mass. We illustrate the method by using a sample of invariant-mass constrained vertices from D^0 --> K^- pi^+ decays to remove a curvature bias in the LHCb spectrometer.

physics.ins-det↗

arXiv2000

Measurements of Inclusive and Exclusive B Decays to Charmonium with BABAR

Using 8.5M B-anti-B events recorded by the BABAR detector the yield of inclusive J/psi, the branching ratios of psi(2S) and chi_C1 are presented. Combining the charmonium state with either a K+,KS, K*+ or K*0 exclusive B decays are reconstructed and their branching ratios determined. Using the fully reconstructed decays, both the B0 and B+ masses and their difference is measured. Finally the contributions of CP even and odd amplitudes in the decay B to J/psi K* are determined from an angular analysis.

hep-ex↗