arXiv subjects

G. Albani

Publications and source records attributed to G. Albani.

2 recordsLinked to original sources

arXiv2026

Demonstrating the thermal noise limit in a backaction-free bulk acoustic wave resonator chain for gravitational wave detection

We report the full sub-Kelvin characterization of the BAUSCIA high-frequency gravitational-wave antenna, based on cryogenic Bulk Acoustic Wave resonators coupled to SQUID amplifiers for signal readout. The end-to-end performance analysis of the experimental chain, from the sensor to the DAQ, demonstrates that resonator thermal noise dominates the noise budget at temperatures well below 100 mK for all investigated modes. The measurements also verify proper thermalization of the resonator modes and rule out significant SQUID backaction on the strain sensor, confirming that the system operates close to its fundamental limits with comparable resonator thermal noise and additive readout noise. From this characterization, we derive projected strain sensitivities in the range $1$--$10 \times 10^{-21}\,\mathrm{Hz}^{-1/2}$ for several resonant frequencies between 5 and 20~MHz, with corresponding fundamental thermal limits in the range $0.7$--$1.4 \times 10^{-21}\,\mathrm{Hz}^{-1/2}$. Equipped with three resonators and synchronized to an absolute global time reference for multi-site coincidences, the antenna is ready to enter a pilot science run.

physics.ins-det↗

arXiv2025

An array of bulk-acoustic-wave sensors as a high-frequency antenna for gravitational waves

In their simplest form, bulk acoustic wave (BAW) devices consist of a piezoelectric crystal between two electrodes that transduce the material's vibrations into electrical signals. They are adopted in frequency control and metrology, with well-established standards at frequencies of 5~MHz and above. Their use as a resonant-mass strain antenna for high-frequency gravitational waves has been recently proposed (Goryachev and Tobar, 2014). The estimated power spectral density sensitivity at the resonant frequencies is of the order of $10^{-21}\, \textrm{strain}/\sqrt{\textrm{Hz}}$. In this paper, after introducing the science opportunity and potential of gravitational wave detection with BAWs, we describe the two-stage BAUSCIA project plan to build a multimode antenna based on commercial BAWs, followed by an optimized array of custom BAWs. We show that commercially available BAWs already provide sensitivity comparable to current experiments around 10~MHz. Finally, we outline options for optimization of custom devices to improve sensitivity in an unexplored region, probe multiple frequencies between 0.1 and 10 MHz, and target specific signals, such as post-merger emission from neutron stars or emission from various dark matter candidates.

physics.ins-det↗