arXiv subjects

Franco Dassi

Publications and source records attributed to Franco Dassi.

At least 19 recordsLinked to original sources

arXiv2026

Stream function -- pressure virtual element methods for the Stokes--Darcy interface problem

This paper introduces a novel Virtual Element Method (VEM) for the coupled Stokes--Darcy system in primal-primal form. In the free-flow Stokes domain, we implement a stream function formulation that inherently satisfies the incompressibility constraint and reduces computational cost. Across the interface, mass conservation, normal stress balance, and the Beavers--Joseph--Saffman slip condition are enforced to couple the biharmonic stream function equation with the Darcy's pressure equation. Leveraging VEM's ability to handle general polygonal meshes, the proposed method naturally accommodates irregular interface geometries without requiring remeshing or adaptive refinement. The accuracy of the method is validated through several numerical simulations that include applications to dead-end filtration, and network flow in bioartificial organs.

math.NA↗

arXiv2026

The 3D Nonconforming Virtual Element Method with enhanced spaces: numerical investigation and implementation guide

In this paper, we describe the 3D Nonconforming Virtual Element Method, where the local spaces are enhanced in order to build an $L^2$ projection of virtual functions onto polynomials of degree $k$. This higher order projection provides a more accurate representation of the load term and, more importantly, it enables the construction of the reaction term. We conduct a convergence analysis of the $L^2$ norm and $H^1$ seminorm errors with respect to mesh size and approximation degree. We also compare our results with those obtained using the conforming Virtual Element Method.

math.NA↗

arXiv2026

A posteriori analysis of a virtual element approach on polytopal meshes for the buckling eigenvalue problem

We introduce a novel residual-based a posteriori error estimator for the conforming $C^1$ Virtual Element Method (VEM) applied to the buckling eigenvalue problem, incorporating nonlinear plane stress effects in both two and three dimensions. The estimator is fully computable on general polyhedral meshes and implemented within the open-source \texttt{vem++} library. Its reliability is rigorously justified via bounds on the residual equation using polynomial projections, stabilisation contributions, and interpolation estimates, while efficiency is ensured through the use of bubble function arguments. Comprehensive numerical experiments in 2D and 3D illustrate the estimator's optimal accuracy and robustness, highlighting its potential for predictive analysis of complex plate structures.

math.NA↗

arXiv2025

Analysis and virtual element discretisation of a Stokes/Biot--Kirchhoff bulk--surface model

We analyse a coupled 3D-2D model with a free fluid governed by Stokes flow in the bulk and a poroelastic plate described by the Biot-Kirchhoff equations on the surface. Assuming the form of a double perturbed saddle-point problem, the unique solvability of the continuous formulation is proved using Fredholm's theory for compact operators and the Babuska--Brezzi approach for saddle-point problems with penalty. We propose a stable virtual element method, establishing a discrete inf-sup condition under a small mesh assumption through a Fortin interpolant that requires only $H^1$-regularity for the Stokes problem. We show the well-posedness of the monolithic discrete formulation and introduce an equivalent fixed-point approach employed at the implementation level. The optimal convergence of the method in the energy norm is proved theoretically and is also confirmed numerically via computational experiments. We demonstrate an application of the model and the proposed scheme in the simulation of immune isolation using encapsulation with silicon nanopore membranes.

math.NA↗

arXiv2025

A posteriori error estimates for a $C^1$ virtual element method applied to the thin plate vibration problem

We propose and analyse residual-based a posteriori error estimates for the virtual element discretisation applied to the thin plate vibration problem in both two and three dimensions. Our approach involves a conforming $C^1$ discrete formulation suitable for meshes composed of polygons and polyhedra. The reliability and efficiency of the error estimator are established through a dimension-independent proof. Finally, several numerical experiments are reported to demonstrate the optimal performance of the method in 2D and 3D.

math.NA↗

arXiv2025

Discontinuous in time Virtual Element method for Darcy equations coupled with Multi Species Transport with First Order Reaction Network

We study transport phenomena involving chemically reactive species, modeled by advection--diffusion--reaction systems coupled with flow fields governed by Darcy's law. Both the velocity field and the species concentrations are discretized using the Virtual Element Method, while time integration is performed through a discontinuous Galerkin scheme. This work represents a preliminary study, in which we introduce some simplifications of the full model. In particular, we assume a concentration-independent viscosity in the Darcy problem, constant diffusion tensors in the advection--diffusion--reaction systems, and first-order reaction networks with liquid-phase degradation. We derive an abstract error estimate by means of a technique that combines Gauss--Radau interpolation with numerical integration. The theoretical results are supported by numerical experiments that exhibit arbitrary-order accuracy in both space and time.

math.NA↗

arXiv2025

A posteriori error analysis of a robust virtual element method for stress-assisted diffusion problems

We develop and analyse residual-based a posteriori error estimates for the virtual element discretisation of a nonlinear stress-assisted diffusion problem in two and three dimensions. The model problem involves a two-way coupling between elasticity and diffusion equations in perturbed saddle-point form. A robust global inf-sup condition and Helmholtz decomposition for $\mathbf{H}(\mathrm{div}, \Omega)$ lead to a reliable and efficient error estimator based on appropriately weighted norms that ensure parameter robustness. The a posteriori error analysis uses quasi-interpolation operators for Stokes and edge virtual element spaces, and we include the proofs of such operators with estimates in 3D for completeness. Finally, we present numerical experiments in both 2D and 3D to demonstrate the optimal performance of the proposed error estimator.

math.NA↗

arXiv2024

SUPG-stabilized time-DG finite and virtual elements for the time-dependent advection-diffusion equation

We carry out a stability and convergence analysis for the fully discrete scheme obtained by combining a finite or virtual element spatial discretization with the upwind-discontinuous Galerkin time-stepping applied to the time-dependent advection-diffusion equation. A space-time streamline-upwind Petrov-Galerkin term is used to stabilize the method. More precisely, we show that the method is inf-sup stable with constant independent of the diffusion coefficient, which ensures the robustness of the method in the convection- and diffusion-dominated regimes. Moreover, we prove optimal convergence rates in both regimes for the error in the energy norm. An important feature of the presented analysis is the control in the full $L^2(0,T;L^2(\Omega))$ norm without the need of introducing an artificial reaction term in the model. We finally present some numerical experiments in $(3 + 1)$-dimensions that validate our theoretical results.

math.NA↗

arXiv2023

BDDC preconditioners for virtual element approximations of the three-dimensional Stokes equations

The Virtual Element Method (VEM) is a novel family of numerical methods for approximating partial differential equations on very general polygonal or polyhedral computational grids. This work aims to propose a Balancing Domain Decomposition by Constraints (BDDC) preconditioner that allows using the conjugate gradient method to compute the solution of the saddle-point linear systems arising from the VEM discretization of the three-dimensional Stokes equations. We prove the scalability and quasi-optimality of the algorithm and confirm the theoretical findings with parallel computations. Numerical results with adaptively generated coarse spaces confirm the method's robustness in the presence of large jumps in the viscosity and with high-order VEM discretizations.

math.NA↗

arXiv2022

A virtual element method on polyhedral meshes for the sixth-order elliptic problem

In this work we analyze a virtual element method on polyhedral meshes for solving the sixth-order elliptic problem with simply supported boundary conditions. We apply the Ciarlet-Raviart arguments to introduce an auxiliary unknown $\sigma:=-\Delta^2 u$ and to search the main uknown $u$ in the $H^2\cap H_0^1$ Sobolev space. The virtual element discretization is well possed on a $C^1\times C^0$ virtual element spaces. We also provide the convergence and error estimates results. Finally, we report a series of numerical tests to verify the performance of numerical scheme.

math.NA↗

arXiv2022

Mixed Virtual Element approximation of linear acoustic wave equation

We design a Mixed Virtual Element Method for the approximated solution to the first-order form of the acoustic wave equation. In absence of external load, the semi-discrete method exactly conserves the system energy. To integrate in time the semi-discrete problem we consider a classical theta-method scheme. We carry out the stability and convergence analysis in the energy norm for the semi-discrete problem showing optimal rate of convergence with respect to the mesh size. We further study the property of energy conservation for the fully-discrete system. Finally, we present some verification tests as well as engineering application of the method.

math.NA↗

arXiv2022

Parallel block preconditioners for virtual element discretizations of the time-dependent Maxwell equations

The focus of this study is the construction and numerical validation of parallel block preconditioners for low order virtual element discretizations of the three-dimensional Maxwell equations. The virtual element method (VEM) is a recent technology for the numerical approximation of partial differential equations (PDEs), that generalizes finite elements to polytopal computational grids. So far, VEM has been extended to several problems described by PDEs, and recently also to the time-dependent Maxwell equations. When the time discretization of PDEs is performed implicitly, at each time-step a large-scale and ill-conditioned linear system must be solved, that, in case of Maxwell equations, is particularly challenging, because of the presence of both H(div) and H(curl) discretization spaces. We propose here a parallel preconditioner, that exploits the Schur complement block factorization of the linear system matrix and consists of a Jacobi preconditioner for the H(div) block and an auxiliary space preconditioner for the H(curl) block. Several parallel numerical tests have been perfomed to study the robustness of the solver with respect to mesh refinement, shape of polyhedral elements, time step size and the VEM stabilization parameter.

math.NA↗

arXiv2022

The Virtual Element Method for the 3D Resistive Magnetohydrodynamic model

We present a four-field Virtual Element discretization for the time-dependent resistive Magnetohydrodynamics equations in three space dimensions, focusing on the semi-discrete formulation. The proposed method employs general polyhedral meshes and guarantees velocity and magnetic fields that are divergence free up to machine precision. We provide a full convergence analysis under suitable regularity assumptions, which is validated by some numerical tests.

math.NA↗

arXiv2021

Arbitrary-order pressure-robust DDR and VEM methods for the Stokes problem on polyhedral meshes

This paper contains two major contributions. First we derive, following the discrete de Rham (DDR) and Virtual Element (VEM) paradigms, pressure-robust methods for the Stokes equations that support arbitrary orders and polyhedral meshes. Unlike other methods presented in the literature, pressure-robustness is achieved here without resorting to an $\boldsymbol{H}({\rm div})$-conforming construction on a submesh, but rather projecting the volumetric force onto the discrete $\boldsymbol{H}({\bf curl})$ space. The cancellation of the pressure error contribution stems from key commutation properties of the underlying DDR and VEM complexes. The pressure-robust error estimates in $h^{k+1}$ (with $h$ denoting the meshsize and $k\ge 0$ the polynomial degree of the DDR or VEM complex) are proven theoretically and supported by a panel of three-dimensional numerical tests. The second major contribution of the paper is an in-depth study of the relations between the DDR and VEM approaches. We show, in particular, that a complex developed following one paradigm admits a reformulation in the other, and that couples of related DDR and VEM complexes satisfy commuting diagram properties with the degrees of freedom maps.

math.NA↗

arXiv2021

Bend 3d Mixed Virtual Element Method for Elliptic Problems

In this study, we propose a virtual element scheme to solve the Darcy problem in three physical dimensions. The main novelty, here proposed, is that curved elements are naturally handled without any degradation of the solution accuracy. In fact, in presence of curved boundaries, or internal interfaces, the geometrical error introduced by planar approximations may dominate the convergence rate limiting the benefit of high-order approximations. We consider the Darcy problem in its mixed form to directly obtain, with our numerical scheme, accurate and mass conservative fluxes without any post-processing. An important step to derive this new scheme is the actual computation of polynomials over curved polyhedrons, here presented and discussed. Finally, we show the theoretical analysis of the scheme as well as several numerical examples to support our findings

math.NA↗

arXiv2021

A Virtual Element Method for the wave equation on curved edges in two dimensions

In this work we present an extension of the Virtual Element Method with curved edges for the numerical approximation of the second order wave equation in a bidimensional setting. Curved elements are used to describe the domain boundary, as well as internal interfaces corresponding to the change of some mechanical parameters. As opposite to the classic and isoparametric Finite Element approaches, where the geometry of the domain is approximated respectively by piecewise straight lines and by higher order polynomial maps, in the proposed method the geometry is exactly represented, thus ensuring a highly accurate numerical solution. Indeed, if in the former approach the geometrical error might deteriorate the quality of the numerical solution, in the latter approach the curved interfaces/boundaries are approximated exactly guaranteeing the expected order of convergence for the numerical scheme. Theoretical results and numerical findings confirm the validity of the proposed approach.

math.NA↗

arXiv2021

Hybridization of the Virtual Element Method for linear elasticity problems

We extend the hybridization procedure proposed in [Arnold, Brezzi, 1985, ESAIM: M2AN] to the Virtual Element Method for linear elasticity problems based on the Hellinger-Reissner principle. To illustrate such a technique, we focus on the 2D case, but other methods and 3D problems can be considered as well. We also show how to design a better approximation of the displacement field using a straightforward post-processing procedure. The numerical experiments confirm the theory for both two and three-dimensional problems.

math.NA↗

arXiv2020

The mixed virtual element method for grids with curved interfaces

In many applications the accurate representation of the computational domain is a key factor to obtain reliable and effective numerical solutions. Curved interfaces, which might be internal, related to physical data, or portions of the physical boundary, are often met in real applications. However, they are often approximated leading to a geometrical error that might become dominant and deteriorate the quality of the results. Underground problems often involve the motion of fluids where the fundamental governing equation is the Darcy law. High quality velocity fields are of paramount importance for the successful subsequent coupling with other physical phenomena such as transport. The virtual element method, as solution scheme, is known to be applicable in problems whose discretizations requires cells of general shape, and the mixed formulation is here preferred to obtain accurate velocity fields. To overcome the issues associated to the complex geometries and, at the same time, retaining the quality of the solutions, we present here the virtual element method to solve the Darcy problem, in mixed form, in presence of curved interfaces in two and three dimensions. The numerical scheme is presented in detail explaining the discrete setting with a focus on the treatment of curved interfaces. Examples, inspired from industrial applications, are presented showing the validity of the proposed approach.

math.NA↗