arXiv Science⌕ Search

arXiv subjects

Francesco Piastra

Publications and source records attributed to Francesco Piastra.

7 recordsLinked to original sources

The Gator low-background spectrometer: readout upgrade and photomultiplier tube radioassay for XLZD

We report on a readout upgrade of Gator, a low-background high-purity germanium spectrometer operated at the Laboratori Nazionali del Gran Sasso for material radioassay. The upgraded data acquisition records digitised waveforms, enabling noise rejection on an event-level basis, and offline energy reconstruction. Measurements before and after the upgrade show an improved energy resolution of 17% at the 2614.5 keV line of 208-Tl, with (2.14 +- 0.22) keV at FWHM, and suppression of electronic noise in the low-energy region. We assess the resulting sensitivity for a specified sample geometry, and present a new background measurement. The background rate in the (100-2700) keV range is (86.6 +- 0.5) counts/(kg day). We also show the radioassay results of sixteen Hamamatsu R17317 3-inch photomultiplier tubes with an improved stem design, which reduces the activities from the primordial 238-U and 232-Th chains by a factor of three, making them suitable candidate photosensors for the XLZD experiment.

physics.ins-det↗

Optical characterization of microcellular PET and crystallized PEN reflectors in liquid argon for LEGEND-1000

Efficient collection of liquid argon (LAr) scintillation light is essential for background rejection in the LEGEND experiment. We investigate microcellular polyethylene terephthalate (PET) and crystallized polyethylene naphthalate (PEN) as candidate reflector materials for LEGEND-1000. Their optical responses to 450 nm light and 128 nm LAr scintillation are measured in LAr and complemented by room-temperature reflectance measurements in air. Under scintillation illumination, PET coupled to a PEN foil and crystallized PEN increase the detected photoelectron yield by factors of $2.36\pm0.11$ and $1.75\pm0.10$, respectively, relative to a black-metal-velvet reference. A Geant4-based optical model yields reflectivity estimates at $450~\mathrm{nm}$ in LAr of $(90\pm4)\%$ for PET and $(81\pm5)\%$ for crystallized PEN, compared with $(80\pm5)\%$ for the Tetratex reference. These results motivate further investigation of both materials for LAr instrumentation, including their radiopurity, long-term cryogenic stability, and performance under matched detector conditions.

physics.ins-det↗

Characterisation of the Bedretto Underground Site for Fundamental Physics Experiments

Underground laboratories provide the ultra-low background and low-vibration environments essential for rare-event searches, gravitational-wave detection, and quantum-sensing technologies. We report a comprehensive environmental characterisation of the Bedretto tunnel in Ticino, Switzerland, a site offering horizontal access, excellent infrastructure, and the potential to be be Europe's second-deepest and quietest underground laboratory. At the prospective physics site, located beneath an overburden exceeding 1400 m, we measure the cosmic-muon, gamma-ray, and neutron fluxes, as well as the radon concentration, magnetic-field spectrum, and seismic backgrounds. The muon flux is suppressed by six orders of magnitude relative to the surface, consistent with an effective depth of about 4000 metre water equivalent, gamma-ray and neutron measurements reflect the local geology and guide shielding requirements for future particle and nuclear physics experiments. Magnetic and seismic noise levels are found to be exceptionally low, meeting or exceeding the criteria for next-generation atom-interferometric gravitational-wave detectors. These results establish the site as a highly competitive, accessible deep-underground location for fundamental-physics experiments.

astro-ph.IM↗

First Operation of a Resistive Shell Liquid Argon Time Projection Chamber -- A new Approach to Electric-Field Shaping

We present a new technology for the shaping of the electric field in Time Projection Chambers (TPCs) using a carbon-loaded polyimide foil. This technology allows for the minimisation of passive material near the active volume of the TPC and thus is capable to reduce background events originating from radioactive decays or scattering on the material itself. Furthermore, the high and continuous electric resistivity of the foil limits the power dissipation per unit area and minimizes the risks of damages in the case of an electric field breakdown. Replacing the conventional field cage with a resistive plastic film structure called 'shell' decreases the number of components within the TPC and therefore reduces the potential points of failure when operating the detector. A prototype liquid argon (LAr) TPC with such a resistive shell and with a cathode made of the same material was successfully tested for long term operation with electric field values up to about 1.5 kV/cm. The experiment shows that it is feasible to successfully produce and shape the electric field in liquefied noble-gas detectors with this new technology.

physics.ins-det↗

A Dual-phase Xenon TPC for Scintillation and Ionisation Yield Measurements in Liquid Xenon

A small-scale, two-phase (liquid/gas) xenon time projection chamber (Xurich II) was designed, constructed and is under operation at the University of Zurich. Its main purpose is to investigate the microphysics of particle interactions in liquid xenon at energies below 50 keV, which are relevant for rare event searches using xenon as target material. Here we describe in detail the detector, its associated infrastructure, and the signal identification algorithm developed for processing and analysing the data. We present the first characterisation of the new instrument with calibration data from an internal 83m-Kr source. The zero-field light yield is 15.0 and 14.0 photoelectrons/keV at 9.4 keV and 32.1 keV, respectively, and the corresponding values at an electron drift field of 1 kV/cm are 10.8 and 7.9 photoelectrons/keV. The charge yields at these energies are 28 and 31 electrons/keV, with the proportional scintillation yield of 24 photoelectrons per one electron extracted into the gas phase, and an electron lifetime of 200 $μ$s. The relative energy resolution, $σ/E$, is 11.9 % and 5.8 % at 9.4 keV and 32.1 keV, respectively using a linear combination of the scintillation and ionisation signals. We conclude with measurements of the electron drift velocity at various electric fields, and compare these to literature values.

astro-ph.IM↗

Cosmogenic activation of xenon and copper

Rare event search experiments using liquid xenon as target and detection medium require ultra-low background levels to fully exploit their physics potential. Cosmic ray induced activation of the detector components and, even more importantly, of the xenon itself during production, transportation and storage at the Earth's surface, might result in the production of radioactive isotopes with long half-lives, with a possible impact on the expected background. We present the first dedicated study on the cosmogenic activation of xenon after 345 days of exposure to cosmic rays at the Jungfraujoch research station at 3470m above sea level, complemented by a study of copper which has been activated simultaneously. We have directly observed the production of 7Be, 101Rh, 125Sb, 126I and 127Xe in xenon, out of which only 125Sb could potentially lead to background for a multi-ton scale dark matter search. The production rates for five out of eight studied radioactive isotopes in copper are in agreement with the only existing dedicated activation measurement, while we observe lower rates for the remaining ones. The specific saturation activities for both samples are also compared to predictions obtained with commonly used software packages, where we observe some underpredictions, especially for xenon activation.

astro-ph.IM↗

Enhancement of Light Yield and Stability of Radio-Pure Tetraphenyl-Butadiene Based Coatings for VUV Light Detection in Cryogenic Environments

The detection of VUV scintillation light, e.g. in (liquid) argon detectors, commonly includes a reflector with a fluorescent coating, converting UV photons to visible light. The light yield of these detectors depends directly on the conversion efficiency. Several coating/reflector combinations were produced using VM2000, a specular reflecting multi layer polymer, and Tetratex, a diffuse reflecting PTFE fabric, as reflector foils. The light yield of these coatings was optimised and has been measured in a dedicated liquid argon setup built at the University of Zurich. It employs a small, 1.3 kg LAr cell viewed by a 3-inch, low radioactivity PMT of type R11065-10 from Hamamatsu. The cryogenic stability of these coatings was additionally studied. The optimum reflector/coating combination was found to be Tetratex dip coated with Tetraphenyl-butadiene with a thickness of 0.9 mg/cm$^2$ resulting in a 3.6 times higher light yield compared to uncoated VM2000. Its performance was stable in long term measurements, ran up to 100 days, in liquid argon. This coated reflector was further investigated concerning radioactive impurities found to be suitable for current and upcoming low-background experiments. Therefore it is used for the liquid argon veto in Phase II of the GERDA neutrinoless double beta decay experiment.

physics.ins-det↗