arXiv subjects

Francesco Grella

Publications and source records attributed to Francesco Grella.

3 recordsLinked to original sources

arXiv2026

PINGU: Extending Air-Bearing Spacecraft Emulators with Open-Source Actuators and Learned Control for Contact-Rich Proximity Operations

Low-cost planar air-bearing testbeds have matured into a standard proxy for free-flying spacecraft GNC, but they remain largely thruster-only and are rarely equipped for contact-rich, inertia-coupled manipulation. Building on the open-source ATMOS testbed, we contribute a reaction wheel and two force/torque-sensed robotic arms (LEVION) with interchangeable end-effectors, integrated as first-class control actuators through a unified ROS 2 abstraction layer. On top of the software stack we build a reinforcement-learning training environment and digital twin, and a controller that exploits these added degrees of freedom, letting classical optimal controllers and learned policies be swapped on the same hardware without modification. We validate the integrated system, PINGU, across four benchmark tasks: point-to-pose navigation (classical LQR vs. sim-to-real PPO), dynamic disturbance rejection under arm-induced center-of-mass shifts, reaction-wheel momentum stabilization, and force-controlled docking. The results show that these additions extend an ATMOS-class emulator into the contact-rich regime and bridge classical optimal control and reinforcement learning on one reproducible platform.

cs.RO↗

arXiv2024

Generating Whole-Body Avoidance Motion through Localized Proximity Sensing

This paper presents a novel control algorithm for robotic manipulators in unstructured environments using proximity sensors partially distributed on the platform. The proposed approach exploits arrays of multi zone Time-of-Flight (ToF) sensors to generate a sparse point cloud representation of the robot surroundings. By employing computational geometry techniques, we fuse the knowledge of robot geometric model with ToFs sensory feedback to generate whole-body motion tasks, allowing to move both sensorized and non-sensorized links in response to unpredictable events such as human motion. In particular, the proposed algorithm computes the pair of closest points between the environment cloud and the robot links, generating a dynamic avoidance motion that is implemented as the highest priority task in a two-level hierarchical architecture. Such a design choice allows the robot to work safely alongside humans even without a complete sensorization over the whole surface. Experimental validation demonstrates the algorithm effectiveness both in static and dynamic scenarios, achieving comparable performances with respect to well established control techniques that aim to move the sensors mounting positions on the robot body. The presented algorithm exploits any arbitrary point on the robot surface to perform avoidance motion, showing improvements in the distance margin up to 100 mm, due to the rendering of virtual avoidance tasks on non-sensorized links.

cs.RO↗

arXiv2024

Touch-to-Touch Translation -- Learning the Mapping Between Heterogeneous Tactile Sensing Technologies

The use of data-driven techniques for tactile data processing and classification has recently increased. However, collecting tactile data is a time-expensive and sensor-specific procedure. Indeed, due to the lack of hardware standards in tactile sensing, data is required to be collected for each different sensor. This paper considers the problem of learning the mapping between two tactile sensor outputs with respect to the same physical stimulus -- we refer to this problem as touch-to-touch translation. In this respect, we proposed two data-driven approaches to address this task and we compared their performance. The first one exploits a generative model developed for image-to-image translation and adapted for this context. The second one uses a ResNet model trained to perform a regression task. We validated both methods using two completely different tactile sensors -- a camera-based, Digit and a capacitance-based, CySkin. In particular, we used Digit images to generate the corresponding CySkin data. We trained the models on a set of tactile features that can be found in common larger objects and we performed the testing on a previously unseen set of data. Experimental results show the possibility of translating Digit images into the CySkin output by preserving the contact shape and with an error of 15.18% in the magnitude of the sensor responses.

cs.RO↗